93ad8a1d59
There are two ways to run a pattern in LP5523. One is using legacy sysfs files such as 'enginex_mode','enginex_load' and 'enginex_leds'. ('x' is from 1 to 3). Among them, 'enginex_leds' are used for selecting specific LED channel MUX. (MUX means which LEDs are used for running a pattern from LED 1 to 9.) The other way is using the firmware interface. In this mode, the default LED MUX strings are used. In other words, LED MUX is not configurable on the fly. This patch enables dynamic LED MUX configuration when the firmware is loaded. By accessing the sysfs file 'enginex_leds', the LED channels can be configured. To synchronize the operation mode, each engine mode should be set to 'LOAD'. The documentation is updated as well. Cc: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
614 lines
14 KiB
C
614 lines
14 KiB
C
/*
|
|
* LP5521/LP5523/LP55231/LP5562 Common Driver
|
|
*
|
|
* Copyright 2012 Texas Instruments
|
|
*
|
|
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Derived from leds-lp5521.c, leds-lp5523.c
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_data/leds-lp55xx.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include "leds-lp55xx-common.h"
|
|
|
|
/* External clock rate */
|
|
#define LP55XX_CLK_32K 32768
|
|
|
|
static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev)
|
|
{
|
|
return container_of(cdev, struct lp55xx_led, cdev);
|
|
}
|
|
|
|
static struct lp55xx_led *dev_to_lp55xx_led(struct device *dev)
|
|
{
|
|
return cdev_to_lp55xx_led(dev_get_drvdata(dev));
|
|
}
|
|
|
|
static void lp55xx_reset_device(struct lp55xx_chip *chip)
|
|
{
|
|
struct lp55xx_device_config *cfg = chip->cfg;
|
|
u8 addr = cfg->reset.addr;
|
|
u8 val = cfg->reset.val;
|
|
|
|
/* no error checking here because no ACK from the device after reset */
|
|
lp55xx_write(chip, addr, val);
|
|
}
|
|
|
|
static int lp55xx_detect_device(struct lp55xx_chip *chip)
|
|
{
|
|
struct lp55xx_device_config *cfg = chip->cfg;
|
|
u8 addr = cfg->enable.addr;
|
|
u8 val = cfg->enable.val;
|
|
int ret;
|
|
|
|
ret = lp55xx_write(chip, addr, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
ret = lp55xx_read(chip, addr, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val != cfg->enable.val)
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lp55xx_post_init_device(struct lp55xx_chip *chip)
|
|
{
|
|
struct lp55xx_device_config *cfg = chip->cfg;
|
|
|
|
if (!cfg->post_init_device)
|
|
return 0;
|
|
|
|
return cfg->post_init_device(chip);
|
|
}
|
|
|
|
static ssize_t lp55xx_show_current(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct lp55xx_led *led = dev_to_lp55xx_led(dev);
|
|
|
|
return scnprintf(buf, PAGE_SIZE, "%d\n", led->led_current);
|
|
}
|
|
|
|
static ssize_t lp55xx_store_current(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct lp55xx_led *led = dev_to_lp55xx_led(dev);
|
|
struct lp55xx_chip *chip = led->chip;
|
|
unsigned long curr;
|
|
|
|
if (kstrtoul(buf, 0, &curr))
|
|
return -EINVAL;
|
|
|
|
if (curr > led->max_current)
|
|
return -EINVAL;
|
|
|
|
if (!chip->cfg->set_led_current)
|
|
return len;
|
|
|
|
mutex_lock(&chip->lock);
|
|
chip->cfg->set_led_current(led, (u8)curr);
|
|
mutex_unlock(&chip->lock);
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t lp55xx_show_max_current(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct lp55xx_led *led = dev_to_lp55xx_led(dev);
|
|
|
|
return scnprintf(buf, PAGE_SIZE, "%d\n", led->max_current);
|
|
}
|
|
|
|
static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current,
|
|
lp55xx_store_current);
|
|
static DEVICE_ATTR(max_current, S_IRUGO , lp55xx_show_max_current, NULL);
|
|
|
|
static struct attribute *lp55xx_led_attributes[] = {
|
|
&dev_attr_led_current.attr,
|
|
&dev_attr_max_current.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group lp55xx_led_attr_group = {
|
|
.attrs = lp55xx_led_attributes
|
|
};
|
|
|
|
static void lp55xx_set_brightness(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
|
|
|
|
led->brightness = (u8)brightness;
|
|
schedule_work(&led->brightness_work);
|
|
}
|
|
|
|
static int lp55xx_init_led(struct lp55xx_led *led,
|
|
struct lp55xx_chip *chip, int chan)
|
|
{
|
|
struct lp55xx_platform_data *pdata = chip->pdata;
|
|
struct lp55xx_device_config *cfg = chip->cfg;
|
|
struct device *dev = &chip->cl->dev;
|
|
char name[32];
|
|
int ret;
|
|
int max_channel = cfg->max_channel;
|
|
|
|
if (chan >= max_channel) {
|
|
dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata->led_config[chan].led_current == 0)
|
|
return 0;
|
|
|
|
led->led_current = pdata->led_config[chan].led_current;
|
|
led->max_current = pdata->led_config[chan].max_current;
|
|
led->chan_nr = pdata->led_config[chan].chan_nr;
|
|
led->cdev.default_trigger = pdata->led_config[chan].default_trigger;
|
|
|
|
if (led->chan_nr >= max_channel) {
|
|
dev_err(dev, "Use channel numbers between 0 and %d\n",
|
|
max_channel - 1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
led->cdev.brightness_set = lp55xx_set_brightness;
|
|
|
|
if (pdata->led_config[chan].name) {
|
|
led->cdev.name = pdata->led_config[chan].name;
|
|
} else {
|
|
snprintf(name, sizeof(name), "%s:channel%d",
|
|
pdata->label ? : chip->cl->name, chan);
|
|
led->cdev.name = name;
|
|
}
|
|
|
|
/*
|
|
* register led class device for each channel and
|
|
* add device attributes
|
|
*/
|
|
|
|
ret = led_classdev_register(dev, &led->cdev);
|
|
if (ret) {
|
|
dev_err(dev, "led register err: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = sysfs_create_group(&led->cdev.dev->kobj, &lp55xx_led_attr_group);
|
|
if (ret) {
|
|
dev_err(dev, "led sysfs err: %d\n", ret);
|
|
led_classdev_unregister(&led->cdev);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)
|
|
{
|
|
struct lp55xx_chip *chip = context;
|
|
struct device *dev = &chip->cl->dev;
|
|
enum lp55xx_engine_index idx = chip->engine_idx;
|
|
|
|
if (!fw) {
|
|
dev_err(dev, "firmware request failed\n");
|
|
goto out;
|
|
}
|
|
|
|
/* handling firmware data is chip dependent */
|
|
mutex_lock(&chip->lock);
|
|
|
|
chip->engines[idx - 1].mode = LP55XX_ENGINE_LOAD;
|
|
chip->fw = fw;
|
|
if (chip->cfg->firmware_cb)
|
|
chip->cfg->firmware_cb(chip);
|
|
|
|
mutex_unlock(&chip->lock);
|
|
|
|
out:
|
|
/* firmware should be released for other channel use */
|
|
release_firmware(chip->fw);
|
|
}
|
|
|
|
static int lp55xx_request_firmware(struct lp55xx_chip *chip)
|
|
{
|
|
const char *name = chip->cl->name;
|
|
struct device *dev = &chip->cl->dev;
|
|
|
|
return request_firmware_nowait(THIS_MODULE, true, name, dev,
|
|
GFP_KERNEL, chip, lp55xx_firmware_loaded);
|
|
}
|
|
|
|
static ssize_t lp55xx_show_engine_select(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct lp55xx_chip *chip = led->chip;
|
|
|
|
return sprintf(buf, "%d\n", chip->engine_idx);
|
|
}
|
|
|
|
static ssize_t lp55xx_store_engine_select(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct lp55xx_chip *chip = led->chip;
|
|
unsigned long val;
|
|
int ret;
|
|
|
|
if (kstrtoul(buf, 0, &val))
|
|
return -EINVAL;
|
|
|
|
/* select the engine to be run */
|
|
|
|
switch (val) {
|
|
case LP55XX_ENGINE_1:
|
|
case LP55XX_ENGINE_2:
|
|
case LP55XX_ENGINE_3:
|
|
mutex_lock(&chip->lock);
|
|
chip->engine_idx = val;
|
|
ret = lp55xx_request_firmware(chip);
|
|
mutex_unlock(&chip->lock);
|
|
break;
|
|
default:
|
|
dev_err(dev, "%lu: invalid engine index. (1, 2, 3)\n", val);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ret) {
|
|
dev_err(dev, "request firmware err: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static inline void lp55xx_run_engine(struct lp55xx_chip *chip, bool start)
|
|
{
|
|
if (chip->cfg->run_engine)
|
|
chip->cfg->run_engine(chip, start);
|
|
}
|
|
|
|
static ssize_t lp55xx_store_engine_run(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct lp55xx_chip *chip = led->chip;
|
|
unsigned long val;
|
|
|
|
if (kstrtoul(buf, 0, &val))
|
|
return -EINVAL;
|
|
|
|
/* run or stop the selected engine */
|
|
|
|
if (val <= 0) {
|
|
lp55xx_run_engine(chip, false);
|
|
return len;
|
|
}
|
|
|
|
mutex_lock(&chip->lock);
|
|
lp55xx_run_engine(chip, true);
|
|
mutex_unlock(&chip->lock);
|
|
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(select_engine, S_IRUGO | S_IWUSR,
|
|
lp55xx_show_engine_select, lp55xx_store_engine_select);
|
|
static DEVICE_ATTR(run_engine, S_IWUSR, NULL, lp55xx_store_engine_run);
|
|
|
|
static struct attribute *lp55xx_engine_attributes[] = {
|
|
&dev_attr_select_engine.attr,
|
|
&dev_attr_run_engine.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group lp55xx_engine_attr_group = {
|
|
.attrs = lp55xx_engine_attributes,
|
|
};
|
|
|
|
int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val)
|
|
{
|
|
return i2c_smbus_write_byte_data(chip->cl, reg, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_write);
|
|
|
|
int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val)
|
|
{
|
|
s32 ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(chip->cl, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = ret;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_read);
|
|
|
|
int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
ret = lp55xx_read(chip, reg, &tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tmp &= ~mask;
|
|
tmp |= val & mask;
|
|
|
|
return lp55xx_write(chip, reg, tmp);
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_update_bits);
|
|
|
|
bool lp55xx_is_extclk_used(struct lp55xx_chip *chip)
|
|
{
|
|
struct clk *clk;
|
|
int err;
|
|
|
|
clk = devm_clk_get(&chip->cl->dev, "32k_clk");
|
|
if (IS_ERR(clk))
|
|
goto use_internal_clk;
|
|
|
|
err = clk_prepare_enable(clk);
|
|
if (err)
|
|
goto use_internal_clk;
|
|
|
|
if (clk_get_rate(clk) != LP55XX_CLK_32K) {
|
|
clk_disable_unprepare(clk);
|
|
goto use_internal_clk;
|
|
}
|
|
|
|
dev_info(&chip->cl->dev, "%dHz external clock used\n", LP55XX_CLK_32K);
|
|
|
|
chip->clk = clk;
|
|
return true;
|
|
|
|
use_internal_clk:
|
|
dev_info(&chip->cl->dev, "internal clock used\n");
|
|
return false;
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_is_extclk_used);
|
|
|
|
int lp55xx_init_device(struct lp55xx_chip *chip)
|
|
{
|
|
struct lp55xx_platform_data *pdata;
|
|
struct lp55xx_device_config *cfg;
|
|
struct device *dev = &chip->cl->dev;
|
|
int ret = 0;
|
|
|
|
WARN_ON(!chip);
|
|
|
|
pdata = chip->pdata;
|
|
cfg = chip->cfg;
|
|
|
|
if (!pdata || !cfg)
|
|
return -EINVAL;
|
|
|
|
if (gpio_is_valid(pdata->enable_gpio)) {
|
|
ret = devm_gpio_request_one(dev, pdata->enable_gpio,
|
|
GPIOF_DIR_OUT, "lp5523_enable");
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not acquire enable gpio (err=%d)\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
gpio_set_value(pdata->enable_gpio, 0);
|
|
usleep_range(1000, 2000); /* Keep enable down at least 1ms */
|
|
gpio_set_value(pdata->enable_gpio, 1);
|
|
usleep_range(1000, 2000); /* 500us abs min. */
|
|
}
|
|
|
|
lp55xx_reset_device(chip);
|
|
|
|
/*
|
|
* Exact value is not available. 10 - 20ms
|
|
* appears to be enough for reset.
|
|
*/
|
|
usleep_range(10000, 20000);
|
|
|
|
ret = lp55xx_detect_device(chip);
|
|
if (ret) {
|
|
dev_err(dev, "device detection err: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
/* chip specific initialization */
|
|
ret = lp55xx_post_init_device(chip);
|
|
if (ret) {
|
|
dev_err(dev, "post init device err: %d\n", ret);
|
|
goto err_post_init;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_post_init:
|
|
lp55xx_deinit_device(chip);
|
|
err:
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_init_device);
|
|
|
|
void lp55xx_deinit_device(struct lp55xx_chip *chip)
|
|
{
|
|
struct lp55xx_platform_data *pdata = chip->pdata;
|
|
|
|
if (chip->clk)
|
|
clk_disable_unprepare(chip->clk);
|
|
|
|
if (gpio_is_valid(pdata->enable_gpio))
|
|
gpio_set_value(pdata->enable_gpio, 0);
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_deinit_device);
|
|
|
|
int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip)
|
|
{
|
|
struct lp55xx_platform_data *pdata = chip->pdata;
|
|
struct lp55xx_device_config *cfg = chip->cfg;
|
|
int num_channels = pdata->num_channels;
|
|
struct lp55xx_led *each;
|
|
u8 led_current;
|
|
int ret;
|
|
int i;
|
|
|
|
if (!cfg->brightness_work_fn) {
|
|
dev_err(&chip->cl->dev, "empty brightness configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < num_channels; i++) {
|
|
|
|
/* do not initialize channels that are not connected */
|
|
if (pdata->led_config[i].led_current == 0)
|
|
continue;
|
|
|
|
led_current = pdata->led_config[i].led_current;
|
|
each = led + i;
|
|
ret = lp55xx_init_led(each, chip, i);
|
|
if (ret)
|
|
goto err_init_led;
|
|
|
|
INIT_WORK(&each->brightness_work, cfg->brightness_work_fn);
|
|
|
|
chip->num_leds++;
|
|
each->chip = chip;
|
|
|
|
/* setting led current at each channel */
|
|
if (cfg->set_led_current)
|
|
cfg->set_led_current(each, led_current);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_init_led:
|
|
lp55xx_unregister_leds(led, chip);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_register_leds);
|
|
|
|
void lp55xx_unregister_leds(struct lp55xx_led *led, struct lp55xx_chip *chip)
|
|
{
|
|
int i;
|
|
struct lp55xx_led *each;
|
|
|
|
for (i = 0; i < chip->num_leds; i++) {
|
|
each = led + i;
|
|
led_classdev_unregister(&each->cdev);
|
|
flush_work(&each->brightness_work);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_unregister_leds);
|
|
|
|
int lp55xx_register_sysfs(struct lp55xx_chip *chip)
|
|
{
|
|
struct device *dev = &chip->cl->dev;
|
|
struct lp55xx_device_config *cfg = chip->cfg;
|
|
int ret;
|
|
|
|
if (!cfg->run_engine || !cfg->firmware_cb)
|
|
goto dev_specific_attrs;
|
|
|
|
ret = sysfs_create_group(&dev->kobj, &lp55xx_engine_attr_group);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_specific_attrs:
|
|
return cfg->dev_attr_group ?
|
|
sysfs_create_group(&dev->kobj, cfg->dev_attr_group) : 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_register_sysfs);
|
|
|
|
void lp55xx_unregister_sysfs(struct lp55xx_chip *chip)
|
|
{
|
|
struct device *dev = &chip->cl->dev;
|
|
struct lp55xx_device_config *cfg = chip->cfg;
|
|
|
|
if (cfg->dev_attr_group)
|
|
sysfs_remove_group(&dev->kobj, cfg->dev_attr_group);
|
|
|
|
sysfs_remove_group(&dev->kobj, &lp55xx_engine_attr_group);
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs);
|
|
|
|
int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np)
|
|
{
|
|
struct device_node *child;
|
|
struct lp55xx_platform_data *pdata;
|
|
struct lp55xx_led_config *cfg;
|
|
int num_channels;
|
|
int i = 0;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
num_channels = of_get_child_count(np);
|
|
if (num_channels == 0) {
|
|
dev_err(dev, "no LED channels\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
cfg = devm_kzalloc(dev, sizeof(*cfg) * num_channels, GFP_KERNEL);
|
|
if (!cfg)
|
|
return -ENOMEM;
|
|
|
|
pdata->led_config = &cfg[0];
|
|
pdata->num_channels = num_channels;
|
|
|
|
for_each_child_of_node(np, child) {
|
|
cfg[i].chan_nr = i;
|
|
|
|
of_property_read_string(child, "chan-name", &cfg[i].name);
|
|
of_property_read_u8(child, "led-cur", &cfg[i].led_current);
|
|
of_property_read_u8(child, "max-cur", &cfg[i].max_current);
|
|
cfg[i].default_trigger =
|
|
of_get_property(child, "linux,default-trigger", NULL);
|
|
|
|
i++;
|
|
}
|
|
|
|
of_property_read_string(np, "label", &pdata->label);
|
|
of_property_read_u8(np, "clock-mode", &pdata->clock_mode);
|
|
|
|
pdata->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
|
|
|
|
/* LP8501 specific */
|
|
of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel);
|
|
|
|
dev->platform_data = pdata;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp55xx_of_populate_pdata);
|
|
|
|
MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
|
|
MODULE_DESCRIPTION("LP55xx Common Driver");
|
|
MODULE_LICENSE("GPL");
|