313 lines
7.1 KiB
C
313 lines
7.1 KiB
C
/*
|
|
* Copyright (c) 2006-2009 Simtec Electronics
|
|
* http://armlinux.simtec.co.uk/
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
* Vincent Sanders <vince@simtec.co.uk>
|
|
*
|
|
* S3C2440/S3C2442 CPU Frequency scaling
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/hardware.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/regs-clock.h>
|
|
|
|
#include <plat/cpu.h>
|
|
#include <plat/cpu-freq-core.h>
|
|
#include <plat/clock.h>
|
|
|
|
static struct clk *xtal;
|
|
static struct clk *fclk;
|
|
static struct clk *hclk;
|
|
static struct clk *armclk;
|
|
|
|
/* HDIV: 1, 2, 3, 4, 6, 8 */
|
|
|
|
static inline int within_khz(unsigned long a, unsigned long b)
|
|
{
|
|
long diff = a - b;
|
|
|
|
return (diff >= -1000 && diff <= 1000);
|
|
}
|
|
|
|
/**
|
|
* s3c2440_cpufreq_calcdivs - calculate divider settings
|
|
* @cfg: The cpu frequency settings.
|
|
*
|
|
* Calcualte the divider values for the given frequency settings
|
|
* specified in @cfg. The values are stored in @cfg for later use
|
|
* by the relevant set routine if the request settings can be reached.
|
|
*/
|
|
int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
|
|
{
|
|
unsigned int hdiv, pdiv;
|
|
unsigned long hclk, fclk, armclk;
|
|
unsigned long hclk_max;
|
|
|
|
fclk = cfg->freq.fclk;
|
|
armclk = cfg->freq.armclk;
|
|
hclk_max = cfg->max.hclk;
|
|
|
|
s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
|
|
__func__, fclk, armclk, hclk_max);
|
|
|
|
if (armclk > fclk) {
|
|
printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
|
|
armclk = fclk;
|
|
}
|
|
|
|
/* if we are in DVS, we need HCLK to be <= ARMCLK */
|
|
if (armclk < fclk && armclk < hclk_max)
|
|
hclk_max = armclk;
|
|
|
|
for (hdiv = 1; hdiv < 9; hdiv++) {
|
|
if (hdiv == 5 || hdiv == 7)
|
|
hdiv++;
|
|
|
|
hclk = (fclk / hdiv);
|
|
if (hclk <= hclk_max || within_khz(hclk, hclk_max))
|
|
break;
|
|
}
|
|
|
|
s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
|
|
|
|
if (hdiv > 8)
|
|
goto invalid;
|
|
|
|
pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
|
|
|
|
if ((hclk / pdiv) > cfg->max.pclk)
|
|
pdiv++;
|
|
|
|
s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
|
|
|
|
if (pdiv > 2)
|
|
goto invalid;
|
|
|
|
pdiv *= hdiv;
|
|
|
|
/* calculate a valid armclk */
|
|
|
|
if (armclk < hclk)
|
|
armclk = hclk;
|
|
|
|
/* if we're running armclk lower than fclk, this really means
|
|
* that the system should go into dvs mode, which means that
|
|
* armclk is connected to hclk. */
|
|
if (armclk < fclk) {
|
|
cfg->divs.dvs = 1;
|
|
armclk = hclk;
|
|
} else
|
|
cfg->divs.dvs = 0;
|
|
|
|
cfg->freq.armclk = armclk;
|
|
|
|
/* store the result, and then return */
|
|
|
|
cfg->divs.h_divisor = hdiv;
|
|
cfg->divs.p_divisor = pdiv;
|
|
|
|
return 0;
|
|
|
|
invalid:
|
|
return -EINVAL;
|
|
}
|
|
|
|
#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
|
|
S3C2440_CAMDIVN_HCLK4_HALF)
|
|
|
|
/**
|
|
* s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
|
|
* @cfg: The cpu frequency settings.
|
|
*
|
|
* Set the divisors from the settings in @cfg, which where generated
|
|
* during the calculation phase by s3c2440_cpufreq_calcdivs().
|
|
*/
|
|
static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
|
|
{
|
|
unsigned long clkdiv, camdiv;
|
|
|
|
s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
|
|
cfg->divs.h_divisor, cfg->divs.p_divisor);
|
|
|
|
clkdiv = __raw_readl(S3C2410_CLKDIVN);
|
|
camdiv = __raw_readl(S3C2440_CAMDIVN);
|
|
|
|
clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
|
|
camdiv &= ~CAMDIVN_HCLK_HALF;
|
|
|
|
switch (cfg->divs.h_divisor) {
|
|
case 1:
|
|
clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
|
|
break;
|
|
|
|
case 2:
|
|
clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
|
|
break;
|
|
|
|
case 6:
|
|
camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
|
|
case 3:
|
|
clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
|
|
break;
|
|
|
|
case 8:
|
|
camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
|
|
case 4:
|
|
clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
|
|
break;
|
|
|
|
default:
|
|
BUG(); /* we don't expect to get here. */
|
|
}
|
|
|
|
if (cfg->divs.p_divisor != cfg->divs.h_divisor)
|
|
clkdiv |= S3C2440_CLKDIVN_PDIVN;
|
|
|
|
/* todo - set pclk. */
|
|
|
|
/* Write the divisors first with hclk intentionally halved so that
|
|
* when we write clkdiv we will under-frequency instead of over. We
|
|
* then make a short delay and remove the hclk halving if necessary.
|
|
*/
|
|
|
|
__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
|
|
__raw_writel(clkdiv, S3C2410_CLKDIVN);
|
|
|
|
ndelay(20);
|
|
__raw_writel(camdiv, S3C2440_CAMDIVN);
|
|
|
|
clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
|
|
}
|
|
|
|
static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
|
|
int *divs,
|
|
struct cpufreq_frequency_table *table,
|
|
size_t table_size)
|
|
{
|
|
unsigned long freq;
|
|
int index = 0;
|
|
int div;
|
|
|
|
for (div = *divs; div > 0; div = *divs++) {
|
|
freq = fclk / div;
|
|
|
|
if (freq > max_hclk && div != 1)
|
|
continue;
|
|
|
|
freq /= 1000; /* table is in kHz */
|
|
index = s3c_cpufreq_addfreq(table, index, table_size, freq);
|
|
if (index < 0)
|
|
break;
|
|
}
|
|
|
|
return index;
|
|
}
|
|
|
|
static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
|
|
|
|
static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
|
|
struct cpufreq_frequency_table *table,
|
|
size_t table_size)
|
|
{
|
|
int ret;
|
|
|
|
WARN_ON(cfg->info == NULL);
|
|
WARN_ON(cfg->board == NULL);
|
|
|
|
ret = run_freq_for(cfg->info->max.hclk,
|
|
cfg->info->max.fclk,
|
|
hclk_divs,
|
|
table, table_size);
|
|
|
|
s3c_freq_dbg("%s: returning %d\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
struct s3c_cpufreq_info s3c2440_cpufreq_info = {
|
|
.max = {
|
|
.fclk = 400000000,
|
|
.hclk = 133333333,
|
|
.pclk = 66666666,
|
|
},
|
|
|
|
.locktime_m = 300,
|
|
.locktime_u = 300,
|
|
.locktime_bits = 16,
|
|
|
|
.name = "s3c244x",
|
|
.calc_iotiming = s3c2410_iotiming_calc,
|
|
.set_iotiming = s3c2410_iotiming_set,
|
|
.get_iotiming = s3c2410_iotiming_get,
|
|
.set_fvco = s3c2410_set_fvco,
|
|
|
|
.set_refresh = s3c2410_cpufreq_setrefresh,
|
|
.set_divs = s3c2440_cpufreq_setdivs,
|
|
.calc_divs = s3c2440_cpufreq_calcdivs,
|
|
.calc_freqtable = s3c2440_cpufreq_calctable,
|
|
|
|
.resume_clocks = s3c244x_setup_clocks,
|
|
|
|
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
|
|
};
|
|
|
|
static int s3c2440_cpufreq_add(struct device *dev,
|
|
struct subsys_interface *sif)
|
|
{
|
|
xtal = s3c_cpufreq_clk_get(NULL, "xtal");
|
|
hclk = s3c_cpufreq_clk_get(NULL, "hclk");
|
|
fclk = s3c_cpufreq_clk_get(NULL, "fclk");
|
|
armclk = s3c_cpufreq_clk_get(NULL, "armclk");
|
|
|
|
if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
|
|
printk(KERN_ERR "%s: failed to get clocks\n", __func__);
|
|
return -ENOENT;
|
|
}
|
|
|
|
return s3c_cpufreq_register(&s3c2440_cpufreq_info);
|
|
}
|
|
|
|
static struct subsys_interface s3c2440_cpufreq_interface = {
|
|
.name = "s3c2440_cpufreq",
|
|
.subsys = &s3c2440_subsys,
|
|
.add_dev = s3c2440_cpufreq_add,
|
|
};
|
|
|
|
static int s3c2440_cpufreq_init(void)
|
|
{
|
|
return subsys_interface_register(&s3c2440_cpufreq_interface);
|
|
}
|
|
|
|
/* arch_initcall adds the clocks we need, so use subsys_initcall. */
|
|
subsys_initcall(s3c2440_cpufreq_init);
|
|
|
|
static struct subsys_interface s3c2442_cpufreq_interface = {
|
|
.name = "s3c2442_cpufreq",
|
|
.subsys = &s3c2442_subsys,
|
|
.add_dev = s3c2440_cpufreq_add,
|
|
};
|
|
|
|
static int s3c2442_cpufreq_init(void)
|
|
{
|
|
return subsys_interface_register(&s3c2442_cpufreq_interface);
|
|
}
|
|
subsys_initcall(s3c2442_cpufreq_init);
|