1394f03221
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
220 lines
7.2 KiB
C
220 lines
7.2 KiB
C
/*
|
|
* file: include/asm-blackfin/mach-bf537/irq.h
|
|
* based on:
|
|
* author:
|
|
*
|
|
* created:
|
|
* description:
|
|
* system mmr register map
|
|
* rev:
|
|
*
|
|
* modified:
|
|
*
|
|
*
|
|
* bugs: enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* this program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the gnu general public license as published by
|
|
* the free software foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* this program is distributed in the hope that it will be useful,
|
|
* but without any warranty; without even the implied warranty of
|
|
* merchantability or fitness for a particular purpose. see the
|
|
* gnu general public license for more details.
|
|
*
|
|
* you should have received a copy of the gnu general public license
|
|
* along with this program; see the file copying.
|
|
* if not, write to the free software foundation,
|
|
* 59 temple place - suite 330, boston, ma 02111-1307, usa.
|
|
*/
|
|
|
|
#ifndef _BF537_IRQ_H_
|
|
#define _BF537_IRQ_H_
|
|
|
|
/*
|
|
* Interrupt source definitions
|
|
Event Source Core Event Name
|
|
Core Emulation **
|
|
Events (highest priority) EMU 0
|
|
Reset RST 1
|
|
NMI NMI 2
|
|
Exception EVX 3
|
|
Reserved -- 4
|
|
Hardware Error IVHW 5
|
|
Core Timer IVTMR 6 *
|
|
|
|
.....
|
|
|
|
Software Interrupt 1 IVG14 31
|
|
Software Interrupt 2 --
|
|
(lowest priority) IVG15 32 *
|
|
*/
|
|
|
|
#define SYS_IRQS 41
|
|
#define NR_PERI_INTS 32
|
|
|
|
/* The ABSTRACT IRQ definitions */
|
|
/** the first seven of the following are fixed, the rest you change if you need to **/
|
|
#define IRQ_EMU 0 /*Emulation */
|
|
#define IRQ_RST 1 /*reset */
|
|
#define IRQ_NMI 2 /*Non Maskable */
|
|
#define IRQ_EVX 3 /*Exception */
|
|
#define IRQ_UNUSED 4 /*- unused interrupt*/
|
|
#define IRQ_HWERR 5 /*Hardware Error */
|
|
#define IRQ_CORETMR 6 /*Core timer */
|
|
|
|
#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */
|
|
#define IRQ_DMA_ERROR 8 /*DMA Error (general) */
|
|
#define IRQ_GENERIC_ERROR 9 /*GENERIC Error Interrupt */
|
|
#define IRQ_RTC 10 /*RTC Interrupt */
|
|
#define IRQ_PPI 11 /*DMA0 Interrupt (PPI) */
|
|
#define IRQ_SPORT0_RX 12 /*DMA3 Interrupt (SPORT0 RX) */
|
|
#define IRQ_SPORT0_TX 13 /*DMA4 Interrupt (SPORT0 TX) */
|
|
#define IRQ_SPORT1_RX 14 /*DMA5 Interrupt (SPORT1 RX) */
|
|
#define IRQ_SPORT1_TX 15 /*DMA6 Interrupt (SPORT1 TX) */
|
|
#define IRQ_TWI 16 /*TWI Interrupt */
|
|
#define IRQ_SPI 17 /*DMA7 Interrupt (SPI) */
|
|
#define IRQ_UART0_RX 18 /*DMA8 Interrupt (UART0 RX) */
|
|
#define IRQ_UART0_TX 19 /*DMA9 Interrupt (UART0 TX) */
|
|
#define IRQ_UART1_RX 20 /*DMA10 Interrupt (UART1 RX) */
|
|
#define IRQ_UART1_TX 21 /*DMA11 Interrupt (UART1 TX) */
|
|
#define IRQ_CAN_RX 22 /*CAN Receive Interrupt */
|
|
#define IRQ_CAN_TX 23 /*CAN Transmit Interrupt */
|
|
#define IRQ_MAC_RX 24 /*DMA1 (Ethernet RX) Interrupt */
|
|
#define IRQ_MAC_TX 25 /*DMA2 (Ethernet TX) Interrupt */
|
|
#define IRQ_TMR0 26 /*Timer 0 */
|
|
#define IRQ_TMR1 27 /*Timer 1 */
|
|
#define IRQ_TMR2 28 /*Timer 2 */
|
|
#define IRQ_TMR3 29 /*Timer 3 */
|
|
#define IRQ_TMR4 30 /*Timer 4 */
|
|
#define IRQ_TMR5 31 /*Timer 5 */
|
|
#define IRQ_TMR6 32 /*Timer 6 */
|
|
#define IRQ_TMR7 33 /*Timer 7 */
|
|
#define IRQ_PROG_INTA 34 /* PF Ports F&G (PF15:0) Interrupt A */
|
|
#define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */
|
|
#define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */
|
|
#define IRQ_MEM_DMA1 37 /*(Memory DMA Stream 1) */
|
|
#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */
|
|
#define IRQ_WATCH 38 /*Watch Dog Timer */
|
|
#define IRQ_SW_INT1 40 /*Software Int 1 */
|
|
#define IRQ_SW_INT2 41 /*Software Int 2 (reserved for SYSCALL) */
|
|
|
|
#define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */
|
|
#define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */
|
|
#define IRQ_MAC_ERROR 44 /*PPI Error Interrupt */
|
|
#define IRQ_SPORT0_ERROR 45 /*SPORT0 Error Interrupt */
|
|
#define IRQ_SPORT1_ERROR 46 /*SPORT1 Error Interrupt */
|
|
#define IRQ_SPI_ERROR 47 /*SPI Error Interrupt */
|
|
#define IRQ_UART0_ERROR 48 /*UART Error Interrupt */
|
|
#define IRQ_UART1_ERROR 49 /*UART Error Interrupt */
|
|
|
|
#define IRQ_PF0 50
|
|
#define IRQ_PF1 51
|
|
#define IRQ_PF2 52
|
|
#define IRQ_PF3 53
|
|
#define IRQ_PF4 54
|
|
#define IRQ_PF5 55
|
|
#define IRQ_PF6 56
|
|
#define IRQ_PF7 57
|
|
#define IRQ_PF8 58
|
|
#define IRQ_PF9 59
|
|
#define IRQ_PF10 60
|
|
#define IRQ_PF11 61
|
|
#define IRQ_PF12 62
|
|
#define IRQ_PF13 63
|
|
#define IRQ_PF14 64
|
|
#define IRQ_PF15 65
|
|
|
|
#define IRQ_PG0 66
|
|
#define IRQ_PG1 67
|
|
#define IRQ_PG2 68
|
|
#define IRQ_PG3 69
|
|
#define IRQ_PG4 70
|
|
#define IRQ_PG5 71
|
|
#define IRQ_PG6 72
|
|
#define IRQ_PG7 73
|
|
#define IRQ_PG8 74
|
|
#define IRQ_PG9 75
|
|
#define IRQ_PG10 76
|
|
#define IRQ_PG11 77
|
|
#define IRQ_PG12 78
|
|
#define IRQ_PG13 79
|
|
#define IRQ_PG14 80
|
|
#define IRQ_PG15 81
|
|
|
|
#define IRQ_PH0 82
|
|
#define IRQ_PH1 83
|
|
#define IRQ_PH2 84
|
|
#define IRQ_PH3 85
|
|
#define IRQ_PH4 86
|
|
#define IRQ_PH5 87
|
|
#define IRQ_PH6 88
|
|
#define IRQ_PH7 89
|
|
#define IRQ_PH8 90
|
|
#define IRQ_PH9 91
|
|
#define IRQ_PH10 92
|
|
#define IRQ_PH11 93
|
|
#define IRQ_PH12 94
|
|
#define IRQ_PH13 95
|
|
#define IRQ_PH14 96
|
|
#define IRQ_PH15 97
|
|
|
|
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
|
|
#define NR_IRQS (IRQ_PH15+1)
|
|
#else
|
|
#define NR_IRQS (IRQ_UART1_ERROR+1)
|
|
#endif
|
|
|
|
#define IVG7 7
|
|
#define IVG8 8
|
|
#define IVG9 9
|
|
#define IVG10 10
|
|
#define IVG11 11
|
|
#define IVG12 12
|
|
#define IVG13 13
|
|
#define IVG14 14
|
|
#define IVG15 15
|
|
|
|
/* IAR0 BIT FIELDS*/
|
|
#define IRQ_PLL_WAKEUP_POS 0
|
|
#define IRQ_DMA_ERROR_POS 4
|
|
#define IRQ_ERROR_POS 8
|
|
#define IRQ_RTC_POS 12
|
|
#define IRQ_PPI_POS 16
|
|
#define IRQ_SPORT0_RX_POS 20
|
|
#define IRQ_SPORT0_TX_POS 24
|
|
#define IRQ_SPORT1_RX_POS 28
|
|
|
|
/* IAR1 BIT FIELDS*/
|
|
#define IRQ_SPORT1_TX_POS 0
|
|
#define IRQ_TWI_POS 4
|
|
#define IRQ_SPI_POS 8
|
|
#define IRQ_UART0_RX_POS 12
|
|
#define IRQ_UART0_TX_POS 16
|
|
#define IRQ_UART1_RX_POS 20
|
|
#define IRQ_UART1_TX_POS 24
|
|
#define IRQ_CAN_RX_POS 28
|
|
|
|
/* IAR2 BIT FIELDS*/
|
|
#define IRQ_CAN_TX_POS 0
|
|
#define IRQ_MAC_RX_POS 4
|
|
#define IRQ_MAC_TX_POS 8
|
|
#define IRQ_TMR0_POS 12
|
|
#define IRQ_TMR1_POS 16
|
|
#define IRQ_TMR2_POS 20
|
|
#define IRQ_TMR3_POS 24
|
|
#define IRQ_TMR4_POS 28
|
|
|
|
/* IAR3 BIT FIELDS*/
|
|
#define IRQ_TMR5_POS 0
|
|
#define IRQ_TMR6_POS 4
|
|
#define IRQ_TMR7_POS 8
|
|
#define IRQ_PROG_INTA_POS 12
|
|
#define IRQ_PORTG_INTB_POS 16
|
|
#define IRQ_MEM_DMA0_POS 20
|
|
#define IRQ_MEM_DMA1_POS 24
|
|
#define IRQ_WATCH_POS 28
|
|
|
|
#endif /* _BF537_IRQ_H_ */
|