kernel-ark/net/tipc/core.h
Allan Stephens b58343f9ea tipc: Eliminate support for tipc_mode global variable
Removes all references to the global variable that records whether
TIPC is running in "single node" mode or "network" mode, since this
information can be easily deduced from the global variable that
records TIPC's network address. (i.e. a non-zero network address
means that TIPC is running in network mode.)

The changes made update most existing mode-based checks to use the
network address global variable. A few checks that are no longer
needed are removed entirely, along with any associated code lying on
non-executable control paths.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24 17:05:17 -05:00

265 lines
7.3 KiB
C

/*
* net/tipc/core.h: Include file for TIPC global declarations
*
* Copyright (c) 2005-2006, Ericsson AB
* Copyright (c) 2005-2007, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _TIPC_CORE_H
#define _TIPC_CORE_H
#include <linux/tipc.h>
#include <linux/tipc_config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <asm/uaccess.h>
#include <linux/interrupt.h>
#include <linux/atomic.h>
#include <asm/hardirq.h>
#include <linux/netdevice.h>
#include <linux/in.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#define TIPC_MOD_VER "2.0.0"
struct tipc_msg; /* msg.h */
struct print_buf; /* log.h */
/*
* TIPC system monitoring code
*/
/*
* TIPC's print buffer subsystem supports the following print buffers:
*
* TIPC_NULL : null buffer (i.e. print nowhere)
* TIPC_CONS : system console
* TIPC_LOG : TIPC log buffer
* &buf : user-defined buffer (struct print_buf *)
*
* Note: TIPC_LOG is configured to echo its output to the system console;
* user-defined buffers can be configured to do the same thing.
*/
extern struct print_buf *const TIPC_NULL;
extern struct print_buf *const TIPC_CONS;
extern struct print_buf *const TIPC_LOG;
void tipc_printf(struct print_buf *, const char *fmt, ...);
/*
* TIPC_OUTPUT is the destination print buffer for system messages.
*/
#ifndef TIPC_OUTPUT
#define TIPC_OUTPUT TIPC_LOG
#endif
#define err(fmt, arg...) tipc_printf(TIPC_OUTPUT, \
KERN_ERR "TIPC: " fmt, ## arg)
#define warn(fmt, arg...) tipc_printf(TIPC_OUTPUT, \
KERN_WARNING "TIPC: " fmt, ## arg)
#define info(fmt, arg...) tipc_printf(TIPC_OUTPUT, \
KERN_NOTICE "TIPC: " fmt, ## arg)
#ifdef CONFIG_TIPC_DEBUG
/*
* DBG_OUTPUT is the destination print buffer for debug messages.
*/
#ifndef DBG_OUTPUT
#define DBG_OUTPUT TIPC_LOG
#endif
#define dbg(fmt, arg...) tipc_printf(DBG_OUTPUT, KERN_DEBUG fmt, ## arg);
#define msg_dbg(msg, txt) tipc_msg_dbg(DBG_OUTPUT, msg, txt);
void tipc_msg_dbg(struct print_buf *, struct tipc_msg *, const char *);
#else
#define dbg(fmt, arg...) do {} while (0)
#define msg_dbg(msg, txt) do {} while (0)
#define tipc_msg_dbg(buf, msg, txt) do {} while (0)
#endif
/*
* TIPC-specific error codes
*/
#define ELINKCONG EAGAIN /* link congestion <=> resource unavailable */
/*
* Global configuration variables
*/
extern u32 tipc_own_addr;
extern int tipc_max_ports;
extern int tipc_max_subscriptions;
extern int tipc_max_publications;
extern int tipc_net_id;
extern int tipc_remote_management;
/*
* Other global variables
*/
extern int tipc_random;
extern const char tipc_alphabet[];
/*
* Routines available to privileged subsystems
*/
extern int tipc_core_start_net(unsigned long);
extern int tipc_handler_start(void);
extern void tipc_handler_stop(void);
extern int tipc_netlink_start(void);
extern void tipc_netlink_stop(void);
extern int tipc_socket_init(void);
extern void tipc_socket_stop(void);
/*
* TIPC timer and signal code
*/
typedef void (*Handler) (unsigned long);
u32 tipc_k_signal(Handler routine, unsigned long argument);
/**
* k_init_timer - initialize a timer
* @timer: pointer to timer structure
* @routine: pointer to routine to invoke when timer expires
* @argument: value to pass to routine when timer expires
*
* Timer must be initialized before use (and terminated when no longer needed).
*/
static inline void k_init_timer(struct timer_list *timer, Handler routine,
unsigned long argument)
{
setup_timer(timer, routine, argument);
}
/**
* k_start_timer - start a timer
* @timer: pointer to timer structure
* @msec: time to delay (in ms)
*
* Schedules a previously initialized timer for later execution.
* If timer is already running, the new timeout overrides the previous request.
*
* To ensure the timer doesn't expire before the specified delay elapses,
* the amount of delay is rounded up when converting to the jiffies
* then an additional jiffy is added to account for the fact that
* the starting time may be in the middle of the current jiffy.
*/
static inline void k_start_timer(struct timer_list *timer, unsigned long msec)
{
mod_timer(timer, jiffies + msecs_to_jiffies(msec) + 1);
}
/**
* k_cancel_timer - cancel a timer
* @timer: pointer to timer structure
*
* Cancels a previously initialized timer.
* Can be called safely even if the timer is already inactive.
*
* WARNING: Must not be called when holding locks required by the timer's
* timeout routine, otherwise deadlock can occur on SMP systems!
*/
static inline void k_cancel_timer(struct timer_list *timer)
{
del_timer_sync(timer);
}
/**
* k_term_timer - terminate a timer
* @timer: pointer to timer structure
*
* Prevents further use of a previously initialized timer.
*
* WARNING: Caller must ensure timer isn't currently running.
*
* (Do not "enhance" this routine to automatically cancel an active timer,
* otherwise deadlock can arise when a timeout routine calls k_term_timer.)
*/
static inline void k_term_timer(struct timer_list *timer)
{
}
/*
* TIPC message buffer code
*
* TIPC message buffer headroom reserves space for the worst-case
* link-level device header (in case the message is sent off-node).
*
* Note: Headroom should be a multiple of 4 to ensure the TIPC header fields
* are word aligned for quicker access
*/
#define BUF_HEADROOM LL_MAX_HEADER
struct tipc_skb_cb {
void *handle;
};
#define TIPC_SKB_CB(__skb) ((struct tipc_skb_cb *)&((__skb)->cb[0]))
static inline struct tipc_msg *buf_msg(struct sk_buff *skb)
{
return (struct tipc_msg *)skb->data;
}
extern struct sk_buff *tipc_buf_acquire(u32 size);
#endif