kernel-ark/arch/ia64/sn/kernel/xpnet.c
Matt LaPlante 4b3f686d4a Attack of "the the"s in arch
The patch below corrects multiple occurances of "the the"
typos across several files, both in source comments and KConfig files.
There is no actual code changed, only text.  Note this only affects the /arch
directory, and I believe I could find many more elsewhere. :)

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:21:02 +02:00

719 lines
19 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
*/
/*
* Cross Partition Network Interface (XPNET) support
*
* XPNET provides a virtual network layered on top of the Cross
* Partition communication layer.
*
* XPNET provides direct point-to-point and broadcast-like support
* for an ethernet-like device. The ethernet broadcast medium is
* replaced with a point-to-point message structure which passes
* pointers to a DMA-capable block that a remote partition should
* retrieve and pass to the upper level networking layer.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/smp.h>
#include <linux/string.h>
#include <asm/sn/bte.h>
#include <asm/sn/io.h>
#include <asm/sn/sn_sal.h>
#include <asm/types.h>
#include <asm/atomic.h>
#include <asm/sn/xp.h>
/*
* The message payload transferred by XPC.
*
* buf_pa is the physical address where the DMA should pull from.
*
* NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a
* cacheline boundary. To accomplish this, we record the number of
* bytes from the beginning of the first cacheline to the first useful
* byte of the skb (leadin_ignore) and the number of bytes from the
* last useful byte of the skb to the end of the last cacheline
* (tailout_ignore).
*
* size is the number of bytes to transfer which includes the skb->len
* (useful bytes of the senders skb) plus the leadin and tailout
*/
struct xpnet_message {
u16 version; /* Version for this message */
u16 embedded_bytes; /* #of bytes embedded in XPC message */
u32 magic; /* Special number indicating this is xpnet */
u64 buf_pa; /* phys address of buffer to retrieve */
u32 size; /* #of bytes in buffer */
u8 leadin_ignore; /* #of bytes to ignore at the beginning */
u8 tailout_ignore; /* #of bytes to ignore at the end */
unsigned char data; /* body of small packets */
};
/*
* Determine the size of our message, the cacheline aligned size,
* and then the number of message will request from XPC.
*
* XPC expects each message to exist in an individual cacheline.
*/
#define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
#define XPNET_MSG_DATA_MAX \
(XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
#define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE))
#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
#define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1)
#define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1)
/*
* Version number of XPNET implementation. XPNET can always talk to versions
* with same major #, and never talk to versions with a different version.
*/
#define _XPNET_VERSION(_major, _minor) (((_major) << 4) | (_minor))
#define XPNET_VERSION_MAJOR(_v) ((_v) >> 4)
#define XPNET_VERSION_MINOR(_v) ((_v) & 0xf)
#define XPNET_VERSION _XPNET_VERSION(1,0) /* version 1.0 */
#define XPNET_VERSION_EMBED _XPNET_VERSION(1,1) /* version 1.1 */
#define XPNET_MAGIC 0x88786984 /* "XNET" */
#define XPNET_VALID_MSG(_m) \
((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \
&& (msg->magic == XPNET_MAGIC))
#define XPNET_DEVICE_NAME "xp0"
/*
* When messages are queued with xpc_send_notify, a kmalloc'd buffer
* of the following type is passed as a notification cookie. When the
* notification function is called, we use the cookie to decide
* whether all outstanding message sends have completed. The skb can
* then be released.
*/
struct xpnet_pending_msg {
struct list_head free_list;
struct sk_buff *skb;
atomic_t use_count;
};
/* driver specific structure pointed to by the device structure */
struct xpnet_dev_private {
struct net_device_stats stats;
};
struct net_device *xpnet_device;
/*
* When we are notified of other partitions activating, we add them to
* our bitmask of partitions to which we broadcast.
*/
static u64 xpnet_broadcast_partitions;
/* protect above */
static DEFINE_SPINLOCK(xpnet_broadcast_lock);
/*
* Since the Block Transfer Engine (BTE) is being used for the transfer
* and it relies upon cache-line size transfers, we need to reserve at
* least one cache-line for head and tail alignment. The BTE is
* limited to 8MB transfers.
*
* Testing has shown that changing MTU to greater than 64KB has no effect
* on TCP as the two sides negotiate a Max Segment Size that is limited
* to 64K. Other protocols May use packets greater than this, but for
* now, the default is 64KB.
*/
#define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES)
/* 32KB has been determined to be the ideal */
#define XPNET_DEF_MTU (0x8000UL)
/*
* The partition id is encapsulated in the MAC address. The following
* define locates the octet the partid is in.
*/
#define XPNET_PARTID_OCTET 1
#define XPNET_LICENSE_OCTET 2
/*
* Define the XPNET debug device structure that is to be used with dev_dbg(),
* dev_err(), dev_warn(), and dev_info().
*/
struct device_driver xpnet_dbg_name = {
.name = "xpnet"
};
struct device xpnet_dbg_subname = {
.bus_id = {0}, /* set to "" */
.driver = &xpnet_dbg_name
};
struct device *xpnet = &xpnet_dbg_subname;
/*
* Packet was recevied by XPC and forwarded to us.
*/
static void
xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
{
struct sk_buff *skb;
bte_result_t bret;
struct xpnet_dev_private *priv =
(struct xpnet_dev_private *) xpnet_device->priv;
if (!XPNET_VALID_MSG(msg)) {
/*
* Packet with a different XPC version. Ignore.
*/
xpc_received(partid, channel, (void *) msg);
priv->stats.rx_errors++;
return;
}
dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size,
msg->leadin_ignore, msg->tailout_ignore);
/* reserve an extra cache line */
skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES);
if (!skb) {
dev_err(xpnet, "failed on dev_alloc_skb(%d)\n",
msg->size + L1_CACHE_BYTES);
xpc_received(partid, channel, (void *) msg);
priv->stats.rx_errors++;
return;
}
/*
* The allocated skb has some reserved space.
* In order to use bte_copy, we need to get the
* skb->data pointer moved forward.
*/
skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
(L1_CACHE_BYTES - 1)) +
msg->leadin_ignore));
/*
* Update the tail pointer to indicate data actually
* transferred.
*/
skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore));
/*
* Move the data over from the other side.
*/
if ((XPNET_VERSION_MINOR(msg->version) == 1) &&
(msg->embedded_bytes != 0)) {
dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, "
"%lu)\n", skb->data, &msg->data,
(size_t) msg->embedded_bytes);
memcpy(skb->data, &msg->data, (size_t) msg->embedded_bytes);
} else {
dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
"bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
(void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
msg->size);
bret = bte_copy(msg->buf_pa,
__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bret != BTE_SUCCESS) {
// >>> Need better way of cleaning skb. Currently skb
// >>> appears in_use and we can't just call
// >>> dev_kfree_skb.
dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
"error=0x%x\n", (void *)msg->buf_pa,
(void *)__pa((u64)skb->data &
~(L1_CACHE_BYTES - 1)),
msg->size, bret);
xpc_received(partid, channel, (void *) msg);
priv->stats.rx_errors++;
return;
}
}
dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
"skb->end=0x%p skb->len=%d\n", (void *) skb->head,
(void *) skb->data, (void *) skb->tail, (void *) skb->end,
skb->len);
skb->dev = xpnet_device;
skb->protocol = eth_type_trans(skb, xpnet_device);
skb->ip_summed = CHECKSUM_UNNECESSARY;
dev_dbg(xpnet, "passing skb to network layer; \n\tskb->head=0x%p "
"skb->data=0x%p skb->tail=0x%p skb->end=0x%p skb->len=%d\n",
(void *) skb->head, (void *) skb->data, (void *) skb->tail,
(void *) skb->end, skb->len);
xpnet_device->last_rx = jiffies;
priv->stats.rx_packets++;
priv->stats.rx_bytes += skb->len + ETH_HLEN;
netif_rx_ni(skb);
xpc_received(partid, channel, (void *) msg);
}
/*
* This is the handler which XPC calls during any sort of change in
* state or message reception on a connection.
*/
static void
xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel,
void *data, void *key)
{
long bp;
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
DBUG_ON(channel != XPC_NET_CHANNEL);
switch(reason) {
case xpcMsgReceived: /* message received */
DBUG_ON(data == NULL);
xpnet_receive(partid, channel, (struct xpnet_message *) data);
break;
case xpcConnected: /* connection completed to a partition */
spin_lock_bh(&xpnet_broadcast_lock);
xpnet_broadcast_partitions |= 1UL << (partid -1 );
bp = xpnet_broadcast_partitions;
spin_unlock_bh(&xpnet_broadcast_lock);
netif_carrier_on(xpnet_device);
dev_dbg(xpnet, "%s connection created to partition %d; "
"xpnet_broadcast_partitions=0x%lx\n",
xpnet_device->name, partid, bp);
break;
default:
spin_lock_bh(&xpnet_broadcast_lock);
xpnet_broadcast_partitions &= ~(1UL << (partid -1 ));
bp = xpnet_broadcast_partitions;
spin_unlock_bh(&xpnet_broadcast_lock);
if (bp == 0) {
netif_carrier_off(xpnet_device);
}
dev_dbg(xpnet, "%s disconnected from partition %d; "
"xpnet_broadcast_partitions=0x%lx\n",
xpnet_device->name, partid, bp);
break;
}
}
static int
xpnet_dev_open(struct net_device *dev)
{
enum xpc_retval ret;
dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %d, "
"%d)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
XPNET_MAX_IDLE_KTHREADS);
ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS);
if (ret != xpcSuccess) {
dev_err(xpnet, "ifconfig up of %s failed on XPC connect, "
"ret=%d\n", dev->name, ret);
return -ENOMEM;
}
dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name);
return 0;
}
static int
xpnet_dev_stop(struct net_device *dev)
{
xpc_disconnect(XPC_NET_CHANNEL);
dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name);
return 0;
}
static int
xpnet_dev_change_mtu(struct net_device *dev, int new_mtu)
{
/* 68 comes from min TCP+IP+MAC header */
if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) {
dev_err(xpnet, "ifconfig %s mtu %d failed; value must be "
"between 68 and %ld\n", dev->name, new_mtu,
XPNET_MAX_MTU);
return -EINVAL;
}
dev->mtu = new_mtu;
dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu);
return 0;
}
/*
* Required for the net_device structure.
*/
static int
xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map)
{
return 0;
}
/*
* Return statistics to the caller.
*/
static struct net_device_stats *
xpnet_dev_get_stats(struct net_device *dev)
{
struct xpnet_dev_private *priv;
priv = (struct xpnet_dev_private *) dev->priv;
return &priv->stats;
}
/*
* Notification that the other end has received the message and
* DMA'd the skb information. At this point, they are done with
* our side. When all recipients are done processing, we
* release the skb and then release our pending message structure.
*/
static void
xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel,
void *__qm)
{
struct xpnet_pending_msg *queued_msg =
(struct xpnet_pending_msg *) __qm;
DBUG_ON(queued_msg == NULL);
dev_dbg(xpnet, "message to %d notified with reason %d\n",
partid, reason);
if (atomic_dec_return(&queued_msg->use_count) == 0) {
dev_dbg(xpnet, "all acks for skb->head=-x%p\n",
(void *) queued_msg->skb->head);
dev_kfree_skb_any(queued_msg->skb);
kfree(queued_msg);
}
}
/*
* Network layer has formatted a packet (skb) and is ready to place it
* "on the wire". Prepare and send an xpnet_message to all partitions
* which have connected with us and are targets of this packet.
*
* MAC-NOTE: For the XPNET driver, the MAC address contains the
* destination partition_id. If the destination partition id word
* is 0xff, this packet is to broadcast to all partitions.
*/
static int
xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct xpnet_pending_msg *queued_msg;
enum xpc_retval ret;
struct xpnet_message *msg;
u64 start_addr, end_addr;
long dp;
u8 second_mac_octet;
partid_t dest_partid;
struct xpnet_dev_private *priv;
u16 embedded_bytes;
priv = (struct xpnet_dev_private *) dev->priv;
dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
"skb->end=0x%p skb->len=%d\n", (void *) skb->head,
(void *) skb->data, (void *) skb->tail, (void *) skb->end,
skb->len);
/*
* The xpnet_pending_msg tracks how many outstanding
* xpc_send_notifies are relying on this skb. When none
* remain, release the skb.
*/
queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC);
if (queued_msg == NULL) {
dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping "
"packet\n", sizeof(struct xpnet_pending_msg));
priv->stats.tx_errors++;
return -ENOMEM;
}
/* get the beginning of the first cacheline and end of last */
start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1));
end_addr = L1_CACHE_ALIGN((u64) skb->tail);
/* calculate how many bytes to embed in the XPC message */
embedded_bytes = 0;
if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
/* skb->data does fit so embed */
embedded_bytes = skb->len;
}
/*
* Since the send occurs asynchronously, we set the count to one
* and begin sending. Any sends that happen to complete before
* we are done sending will not free the skb. We will be left
* with that task during exit. This also handles the case of
* a packet destined for a partition which is no longer up.
*/
atomic_set(&queued_msg->use_count, 1);
queued_msg->skb = skb;
second_mac_octet = skb->data[XPNET_PARTID_OCTET];
if (second_mac_octet == 0xff) {
/* we are being asked to broadcast to all partitions */
dp = xpnet_broadcast_partitions;
} else if (second_mac_octet != 0) {
dp = xpnet_broadcast_partitions &
(1UL << (second_mac_octet - 1));
} else {
/* 0 is an invalid partid. Ignore */
dp = 0;
}
dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
/*
* If we wanted to allow promiscous mode to work like an
* unswitched network, this would be a good point to OR in a
* mask of partitions which should be receiving all packets.
*/
/*
* Main send loop.
*/
for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
dest_partid++) {
if (!(dp & (1UL << (dest_partid - 1)))) {
/* not destined for this partition */
continue;
}
/* remove this partition from the destinations mask */
dp &= ~(1UL << (dest_partid - 1));
/* found a partition to send to */
ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
XPC_NOWAIT, (void **)&msg);
if (unlikely(ret != xpcSuccess)) {
continue;
}
msg->embedded_bytes = embedded_bytes;
if (unlikely(embedded_bytes != 0)) {
msg->version = XPNET_VERSION_EMBED;
dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
&msg->data, skb->data, (size_t) embedded_bytes);
memcpy(&msg->data, skb->data, (size_t) embedded_bytes);
} else {
msg->version = XPNET_VERSION;
}
msg->magic = XPNET_MAGIC;
msg->size = end_addr - start_addr;
msg->leadin_ignore = (u64) skb->data - start_addr;
msg->tailout_ignore = end_addr - (u64) skb->tail;
msg->buf_pa = __pa(start_addr);
dev_dbg(xpnet, "sending XPC message to %d:%d\nmsg->buf_pa="
"0x%lx, msg->size=%u, msg->leadin_ignore=%u, "
"msg->tailout_ignore=%u\n", dest_partid,
XPC_NET_CHANNEL, msg->buf_pa, msg->size,
msg->leadin_ignore, msg->tailout_ignore);
atomic_inc(&queued_msg->use_count);
ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
xpnet_send_completed, queued_msg);
if (unlikely(ret != xpcSuccess)) {
atomic_dec(&queued_msg->use_count);
continue;
}
}
if (atomic_dec_return(&queued_msg->use_count) == 0) {
dev_dbg(xpnet, "no partitions to receive packet destined for "
"%d\n", dest_partid);
dev_kfree_skb(skb);
kfree(queued_msg);
}
priv->stats.tx_packets++;
priv->stats.tx_bytes += skb->len;
return 0;
}
/*
* Deal with transmit timeouts coming from the network layer.
*/
static void
xpnet_dev_tx_timeout (struct net_device *dev)
{
struct xpnet_dev_private *priv;
priv = (struct xpnet_dev_private *) dev->priv;
priv->stats.tx_errors++;
return;
}
static int __init
xpnet_init(void)
{
int i;
u32 license_num;
int result = -ENOMEM;
if (!ia64_platform_is("sn2")) {
return -ENODEV;
}
dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
/*
* use ether_setup() to init the majority of our device
* structure and then override the necessary pieces.
*/
xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
XPNET_DEVICE_NAME, ether_setup);
if (xpnet_device == NULL) {
return -ENOMEM;
}
netif_carrier_off(xpnet_device);
xpnet_device->mtu = XPNET_DEF_MTU;
xpnet_device->change_mtu = xpnet_dev_change_mtu;
xpnet_device->open = xpnet_dev_open;
xpnet_device->get_stats = xpnet_dev_get_stats;
xpnet_device->stop = xpnet_dev_stop;
xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit;
xpnet_device->tx_timeout = xpnet_dev_tx_timeout;
xpnet_device->set_config = xpnet_dev_set_config;
/*
* Multicast assumes the LSB of the first octet is set for multicast
* MAC addresses. We chose the first octet of the MAC to be unlikely
* to collide with any vendor's officially issued MAC.
*/
xpnet_device->dev_addr[0] = 0xfe;
xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
license_num = sn_partition_serial_number_val();
for (i = 3; i >= 0; i--) {
xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
license_num & 0xff;
license_num = license_num >> 8;
}
/*
* ether_setup() sets this to a multicast device. We are
* really not supporting multicast at this time.
*/
xpnet_device->flags &= ~IFF_MULTICAST;
/*
* No need to checksum as it is a DMA transfer. The BTE will
* report an error if the data is not retrievable and the
* packet will be dropped.
*/
xpnet_device->features = NETIF_F_NO_CSUM;
result = register_netdev(xpnet_device);
if (result != 0) {
free_netdev(xpnet_device);
}
return result;
}
module_init(xpnet_init);
static void __exit
xpnet_exit(void)
{
dev_info(xpnet, "unregistering network device %s\n",
xpnet_device[0].name);
unregister_netdev(xpnet_device);
free_netdev(xpnet_device);
}
module_exit(xpnet_exit);
MODULE_AUTHOR("Silicon Graphics, Inc.");
MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)");
MODULE_LICENSE("GPL");