kernel-ark/drivers/char/agp/amd64-agp.c
Dave Jones 2fa938b8a3 [PATCH] sis 760 support.
This patch adds the SiS 760 ID to the amd64-agp driver, so that agpgart can be
used on Athlon64 boards based on this chip.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 21:22:14 -07:00

771 lines
20 KiB
C

/*
* Copyright 2001-2003 SuSE Labs.
* Distributed under the GNU public license, v2.
*
* This is a GART driver for the AMD Opteron/Athlon64 on-CPU northbridge.
* It also includes support for the AMD 8151 AGP bridge,
* although it doesn't actually do much, as all the real
* work is done in the northbridge(s).
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
#include "agp.h"
/* Will need to be increased if AMD64 ever goes >8-way. */
#define MAX_HAMMER_GARTS 8
/* PTE bits. */
#define GPTE_VALID 1
#define GPTE_COHERENT 2
/* Aperture control register bits. */
#define GARTEN (1<<0)
#define DISGARTCPU (1<<4)
#define DISGARTIO (1<<5)
/* GART cache control register bits. */
#define INVGART (1<<0)
#define GARTPTEERR (1<<1)
/* K8 On-cpu GART registers */
#define AMD64_GARTAPERTURECTL 0x90
#define AMD64_GARTAPERTUREBASE 0x94
#define AMD64_GARTTABLEBASE 0x98
#define AMD64_GARTCACHECTL 0x9c
#define AMD64_GARTEN (1<<0)
/* NVIDIA K8 registers */
#define NVIDIA_X86_64_0_APBASE 0x10
#define NVIDIA_X86_64_1_APBASE1 0x50
#define NVIDIA_X86_64_1_APLIMIT1 0x54
#define NVIDIA_X86_64_1_APSIZE 0xa8
#define NVIDIA_X86_64_1_APBASE2 0xd8
#define NVIDIA_X86_64_1_APLIMIT2 0xdc
/* ULi K8 registers */
#define ULI_X86_64_BASE_ADDR 0x10
#define ULI_X86_64_HTT_FEA_REG 0x50
#define ULI_X86_64_ENU_SCR_REG 0x54
static int nr_garts;
static struct pci_dev * hammers[MAX_HAMMER_GARTS];
static struct resource *aperture_resource;
static int __initdata agp_try_unsupported;
static int gart_iterator;
#define for_each_nb() for(gart_iterator=0;gart_iterator<nr_garts;gart_iterator++)
static void flush_amd64_tlb(struct pci_dev *dev)
{
u32 tmp;
pci_read_config_dword (dev, AMD64_GARTCACHECTL, &tmp);
tmp |= INVGART;
pci_write_config_dword (dev, AMD64_GARTCACHECTL, tmp);
}
static void amd64_tlbflush(struct agp_memory *temp)
{
for_each_nb()
flush_amd64_tlb(hammers[gart_iterator]);
}
static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
{
int i, j, num_entries;
long long tmp;
u32 pte;
num_entries = agp_num_entries();
if (type != 0 || mem->type != 0)
return -EINVAL;
/* Make sure we can fit the range in the gatt table. */
/* FIXME: could wrap */
if (((unsigned long)pg_start + mem->page_count) > num_entries)
return -EINVAL;
j = pg_start;
/* gatt table should be empty. */
while (j < (pg_start + mem->page_count)) {
if (!PGE_EMPTY(agp_bridge, readl(agp_bridge->gatt_table+j)))
return -EBUSY;
j++;
}
if (mem->is_flushed == FALSE) {
global_cache_flush();
mem->is_flushed = TRUE;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
tmp = agp_bridge->driver->mask_memory(agp_bridge,
mem->memory[i], mem->type);
BUG_ON(tmp & 0xffffff0000000ffcULL);
pte = (tmp & 0x000000ff00000000ULL) >> 28;
pte |=(tmp & 0x00000000fffff000ULL);
pte |= GPTE_VALID | GPTE_COHERENT;
writel(pte, agp_bridge->gatt_table+j);
readl(agp_bridge->gatt_table+j); /* PCI Posting. */
}
amd64_tlbflush(mem);
return 0;
}
/*
* This hack alters the order element according
* to the size of a long. It sucks. I totally disown this, even
* though it does appear to work for the most part.
*/
static struct aper_size_info_32 amd64_aperture_sizes[7] =
{
{32, 8192, 3+(sizeof(long)/8), 0 },
{64, 16384, 4+(sizeof(long)/8), 1<<1 },
{128, 32768, 5+(sizeof(long)/8), 1<<2 },
{256, 65536, 6+(sizeof(long)/8), 1<<1 | 1<<2 },
{512, 131072, 7+(sizeof(long)/8), 1<<3 },
{1024, 262144, 8+(sizeof(long)/8), 1<<1 | 1<<3},
{2048, 524288, 9+(sizeof(long)/8), 1<<2 | 1<<3}
};
/*
* Get the current Aperture size from the x86-64.
* Note, that there may be multiple x86-64's, but we just return
* the value from the first one we find. The set_size functions
* keep the rest coherent anyway. Or at least should do.
*/
static int amd64_fetch_size(void)
{
struct pci_dev *dev;
int i;
u32 temp;
struct aper_size_info_32 *values;
dev = hammers[0];
if (dev==NULL)
return 0;
pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &temp);
temp = (temp & 0xe);
values = A_SIZE_32(amd64_aperture_sizes);
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
if (temp == values[i].size_value) {
agp_bridge->previous_size =
agp_bridge->current_size = (void *) (values + i);
agp_bridge->aperture_size_idx = i;
return values[i].size;
}
}
return 0;
}
/*
* In a multiprocessor x86-64 system, this function gets
* called once for each CPU.
*/
static u64 amd64_configure (struct pci_dev *hammer, u64 gatt_table)
{
u64 aperturebase;
u32 tmp;
u64 addr, aper_base;
/* Address to map to */
pci_read_config_dword (hammer, AMD64_GARTAPERTUREBASE, &tmp);
aperturebase = tmp << 25;
aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK);
/* address of the mappings table */
addr = (u64) gatt_table;
addr >>= 12;
tmp = (u32) addr<<4;
tmp &= ~0xf;
pci_write_config_dword (hammer, AMD64_GARTTABLEBASE, tmp);
/* Enable GART translation for this hammer. */
pci_read_config_dword(hammer, AMD64_GARTAPERTURECTL, &tmp);
tmp |= GARTEN;
tmp &= ~(DISGARTCPU | DISGARTIO);
pci_write_config_dword(hammer, AMD64_GARTAPERTURECTL, tmp);
/* keep CPU's coherent. */
flush_amd64_tlb (hammer);
return aper_base;
}
static struct aper_size_info_32 amd_8151_sizes[7] =
{
{2048, 524288, 9, 0x00000000 }, /* 0 0 0 0 0 0 */
{1024, 262144, 8, 0x00000400 }, /* 1 0 0 0 0 0 */
{512, 131072, 7, 0x00000600 }, /* 1 1 0 0 0 0 */
{256, 65536, 6, 0x00000700 }, /* 1 1 1 0 0 0 */
{128, 32768, 5, 0x00000720 }, /* 1 1 1 1 0 0 */
{64, 16384, 4, 0x00000730 }, /* 1 1 1 1 1 0 */
{32, 8192, 3, 0x00000738 } /* 1 1 1 1 1 1 */
};
static int amd_8151_configure(void)
{
unsigned long gatt_bus = virt_to_gart(agp_bridge->gatt_table_real);
/* Configure AGP regs in each x86-64 host bridge. */
for_each_nb() {
agp_bridge->gart_bus_addr =
amd64_configure(hammers[gart_iterator],gatt_bus);
}
return 0;
}
static void amd64_cleanup(void)
{
u32 tmp;
for_each_nb() {
/* disable gart translation */
pci_read_config_dword (hammers[gart_iterator], AMD64_GARTAPERTURECTL, &tmp);
tmp &= ~AMD64_GARTEN;
pci_write_config_dword (hammers[gart_iterator], AMD64_GARTAPERTURECTL, tmp);
}
}
static struct agp_bridge_driver amd_8151_driver = {
.owner = THIS_MODULE,
.aperture_sizes = amd_8151_sizes,
.size_type = U32_APER_SIZE,
.num_aperture_sizes = 7,
.configure = amd_8151_configure,
.fetch_size = amd64_fetch_size,
.cleanup = amd64_cleanup,
.tlb_flush = amd64_tlbflush,
.mask_memory = agp_generic_mask_memory,
.masks = NULL,
.agp_enable = agp_generic_enable,
.cache_flush = global_cache_flush,
.create_gatt_table = agp_generic_create_gatt_table,
.free_gatt_table = agp_generic_free_gatt_table,
.insert_memory = amd64_insert_memory,
.remove_memory = agp_generic_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
};
/* Some basic sanity checks for the aperture. */
static int __devinit aperture_valid(u64 aper, u32 size)
{
u32 pfn, c;
if (aper == 0) {
printk(KERN_ERR PFX "No aperture\n");
return 0;
}
if (size < 32*1024*1024) {
printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20);
return 0;
}
if (aper + size > 0xffffffff) {
printk(KERN_ERR PFX "Aperture out of bounds\n");
return 0;
}
pfn = aper >> PAGE_SHIFT;
for (c = 0; c < size/PAGE_SIZE; c++) {
if (!pfn_valid(pfn + c))
break;
if (!PageReserved(pfn_to_page(pfn + c))) {
printk(KERN_ERR PFX "Aperture pointing to RAM\n");
return 0;
}
}
/* Request the Aperture. This catches cases when someone else
already put a mapping in there - happens with some very broken BIOS
Maybe better to use pci_assign_resource/pci_enable_device instead
trusting the bridges? */
if (!aperture_resource &&
!(aperture_resource = request_mem_region(aper, size, "aperture"))) {
printk(KERN_ERR PFX "Aperture conflicts with PCI mapping.\n");
return 0;
}
return 1;
}
/*
* W*s centric BIOS sometimes only set up the aperture in the AGP
* bridge, not the northbridge. On AMD64 this is handled early
* in aperture.c, but when GART_IOMMU is not enabled or we run
* on a 32bit kernel this needs to be redone.
* Unfortunately it is impossible to fix the aperture here because it's too late
* to allocate that much memory. But at least error out cleanly instead of
* crashing.
*/
static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
u16 cap)
{
u32 aper_low, aper_hi;
u64 aper, nb_aper;
int order = 0;
u32 nb_order, nb_base;
u16 apsize;
pci_read_config_dword(nb, 0x90, &nb_order);
nb_order = (nb_order >> 1) & 7;
pci_read_config_dword(nb, 0x94, &nb_base);
nb_aper = nb_base << 25;
if (aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) {
return 0;
}
/* Northbridge seems to contain crap. Try the AGP bridge. */
pci_read_config_word(agp, cap+0x14, &apsize);
if (apsize == 0xffff)
return -1;
apsize &= 0xfff;
/* Some BIOS use weird encodings not in the AGPv3 table. */
if (apsize & 0xff)
apsize |= 0xf00;
order = 7 - hweight16(apsize);
pci_read_config_dword(agp, 0x10, &aper_low);
pci_read_config_dword(agp, 0x14, &aper_hi);
aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32);
printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order);
if (order < 0 || !aperture_valid(aper, (32*1024*1024)<<order))
return -1;
pci_write_config_dword(nb, 0x90, order << 1);
pci_write_config_dword(nb, 0x94, aper >> 25);
return 0;
}
static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
{
struct pci_dev *loop_dev = NULL;
int i = 0;
/* cache pci_devs of northbridges. */
while ((loop_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1103, loop_dev))
!= NULL) {
if (i == MAX_HAMMER_GARTS) {
printk(KERN_ERR PFX "Too many northbridges for AGP\n");
return -1;
}
if (fix_northbridge(loop_dev, pdev, cap_ptr) < 0) {
printk(KERN_ERR PFX "No usable aperture found.\n");
#ifdef __x86_64__
/* should port this to i386 */
printk(KERN_ERR PFX "Consider rebooting with iommu=memaper=2 to get a good aperture.\n");
#endif
return -1;
}
hammers[i++] = loop_dev;
}
nr_garts = i;
return i == 0 ? -1 : 0;
}
/* Handle AMD 8151 quirks */
static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data *bridge)
{
char *revstring;
u8 rev_id;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
switch (rev_id) {
case 0x01: revstring="A0"; break;
case 0x02: revstring="A1"; break;
case 0x11: revstring="B0"; break;
case 0x12: revstring="B1"; break;
case 0x13: revstring="B2"; break;
case 0x14: revstring="B3"; break;
default: revstring="??"; break;
}
printk (KERN_INFO PFX "Detected AMD 8151 AGP Bridge rev %s\n", revstring);
/*
* Work around errata.
* Chips before B2 stepping incorrectly reporting v3.5
*/
if (rev_id < 0x13) {
printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
bridge->major_version = 3;
bridge->minor_version = 0;
}
}
static struct aper_size_info_32 uli_sizes[7] =
{
{256, 65536, 6, 10},
{128, 32768, 5, 9},
{64, 16384, 4, 8},
{32, 8192, 3, 7},
{16, 4096, 2, 6},
{8, 2048, 1, 4},
{4, 1024, 0, 3}
};
static int __devinit uli_agp_init(struct pci_dev *pdev)
{
u32 httfea,baseaddr,enuscr;
struct pci_dev *dev1;
int i;
unsigned size = amd64_fetch_size();
printk(KERN_INFO "Setting up ULi AGP. \n");
dev1 = pci_find_slot ((unsigned int)pdev->bus->number,PCI_DEVFN(0,0));
if (dev1 == NULL) {
printk(KERN_INFO PFX "Detected a ULi chipset, "
"but could not fine the secondary device.\n");
return -ENODEV;
}
for (i = 0; i < ARRAY_SIZE(uli_sizes); i++)
if (uli_sizes[i].size == size)
break;
if (i == ARRAY_SIZE(uli_sizes)) {
printk(KERN_INFO PFX "No ULi size found for %d\n", size);
return -ENODEV;
}
/* shadow x86-64 registers into ULi registers */
pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &httfea);
/* if x86-64 aperture base is beyond 4G, exit here */
if ((httfea & 0x7fff) >> (32 - 25))
return -ENODEV;
httfea = (httfea& 0x7fff) << 25;
pci_read_config_dword(pdev, ULI_X86_64_BASE_ADDR, &baseaddr);
baseaddr&= ~PCI_BASE_ADDRESS_MEM_MASK;
baseaddr|= httfea;
pci_write_config_dword(pdev, ULI_X86_64_BASE_ADDR, baseaddr);
enuscr= httfea+ (size * 1024 * 1024) - 1;
pci_write_config_dword(dev1, ULI_X86_64_HTT_FEA_REG, httfea);
pci_write_config_dword(dev1, ULI_X86_64_ENU_SCR_REG, enuscr);
return 0;
}
static struct aper_size_info_32 nforce3_sizes[5] =
{
{512, 131072, 7, 0x00000000 },
{256, 65536, 6, 0x00000008 },
{128, 32768, 5, 0x0000000C },
{64, 16384, 4, 0x0000000E },
{32, 8192, 3, 0x0000000F }
};
/* Handle shadow device of the Nvidia NForce3 */
/* CHECK-ME original 2.4 version set up some IORRs. Check if that is needed. */
static int __devinit nforce3_agp_init(struct pci_dev *pdev)
{
u32 tmp, apbase, apbar, aplimit;
struct pci_dev *dev1;
int i;
unsigned size = amd64_fetch_size();
printk(KERN_INFO PFX "Setting up Nforce3 AGP.\n");
dev1 = pci_find_slot((unsigned int)pdev->bus->number, PCI_DEVFN(11, 0));
if (dev1 == NULL) {
printk(KERN_INFO PFX "agpgart: Detected an NVIDIA "
"nForce3 chipset, but could not find "
"the secondary device.\n");
return -ENODEV;
}
for (i = 0; i < ARRAY_SIZE(nforce3_sizes); i++)
if (nforce3_sizes[i].size == size)
break;
if (i == ARRAY_SIZE(nforce3_sizes)) {
printk(KERN_INFO PFX "No NForce3 size found for %d\n", size);
return -ENODEV;
}
pci_read_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, &tmp);
tmp &= ~(0xf);
tmp |= nforce3_sizes[i].size_value;
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, tmp);
/* shadow x86-64 registers into NVIDIA registers */
pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &apbase);
/* if x86-64 aperture base is beyond 4G, exit here */
if ( (apbase & 0x7fff) >> (32 - 25) )
return -ENODEV;
apbase = (apbase & 0x7fff) << 25;
pci_read_config_dword(pdev, NVIDIA_X86_64_0_APBASE, &apbar);
apbar &= ~PCI_BASE_ADDRESS_MEM_MASK;
apbar |= apbase;
pci_write_config_dword(pdev, NVIDIA_X86_64_0_APBASE, apbar);
aplimit = apbase + (size * 1024 * 1024) - 1;
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APBASE1, apbase);
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APLIMIT1, aplimit);
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APBASE2, apbase);
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APLIMIT2, aplimit);
return 0;
}
static int __devinit agp_amd64_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct agp_bridge_data *bridge;
u8 cap_ptr;
cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
if (!cap_ptr)
return -ENODEV;
/* Could check for AGPv3 here */
bridge = agp_alloc_bridge();
if (!bridge)
return -ENOMEM;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
pdev->device == PCI_DEVICE_ID_AMD_8151_0) {
amd8151_init(pdev, bridge);
} else {
printk(KERN_INFO PFX "Detected AGP bridge %x\n", pdev->devfn);
}
bridge->driver = &amd_8151_driver;
bridge->dev = pdev;
bridge->capndx = cap_ptr;
/* Fill in the mode register */
pci_read_config_dword(pdev, bridge->capndx+PCI_AGP_STATUS, &bridge->mode);
if (cache_nbs(pdev, cap_ptr) == -1) {
agp_put_bridge(bridge);
return -ENODEV;
}
if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
int ret = nforce3_agp_init(pdev);
if (ret) {
agp_put_bridge(bridge);
return ret;
}
}
if (pdev->vendor == PCI_VENDOR_ID_AL) {
int ret = uli_agp_init(pdev);
if (ret) {
agp_put_bridge(bridge);
return ret;
}
}
pci_set_drvdata(pdev, bridge);
return agp_add_bridge(bridge);
}
static void __devexit agp_amd64_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
release_mem_region(virt_to_gart(bridge->gatt_table_real),
amd64_aperture_sizes[bridge->aperture_size_idx].size);
agp_remove_bridge(bridge);
agp_put_bridge(bridge);
}
static struct pci_device_id agp_amd64_pci_table[] = {
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_AMD,
.device = PCI_DEVICE_ID_AMD_8151_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* ULi M1689 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_AL,
.device = PCI_DEVICE_ID_AL_M1689,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8T800Pro */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_K8T800PRO_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8T800 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_8385_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8M800 / K8N800 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_8380_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8T890 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_3238_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8T800/K8M800/K8N800 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_838X_1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* NForce3 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NFORCE3,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NFORCE3S,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* SIS 755 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_SI,
.device = PCI_DEVICE_ID_SI_755,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* SIS 760 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_SI,
.device = PCI_DEVICE_ID_SI_760,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{ }
};
MODULE_DEVICE_TABLE(pci, agp_amd64_pci_table);
static struct pci_driver agp_amd64_pci_driver = {
.name = "agpgart-amd64",
.id_table = agp_amd64_pci_table,
.probe = agp_amd64_probe,
.remove = agp_amd64_remove,
};
/* Not static due to IOMMU code calling it early. */
int __init agp_amd64_init(void)
{
int err = 0;
static struct pci_device_id amd64nb[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
{ },
};
if (agp_off)
return -EINVAL;
if (pci_register_driver(&agp_amd64_pci_driver) > 0) {
struct pci_dev *dev;
if (!agp_try_unsupported && !agp_try_unsupported_boot) {
printk(KERN_INFO PFX "No supported AGP bridge found.\n");
#ifdef MODULE
printk(KERN_INFO PFX "You can try agp_try_unsupported=1\n");
#else
printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n");
#endif
return -ENODEV;
}
/* First check that we have at least one AMD64 NB */
if (!pci_dev_present(amd64nb))
return -ENODEV;
/* Look for any AGP bridge */
dev = NULL;
err = -ENODEV;
for_each_pci_dev(dev) {
if (!pci_find_capability(dev, PCI_CAP_ID_AGP))
continue;
/* Only one bridge supported right now */
if (agp_amd64_probe(dev, NULL) == 0) {
err = 0;
break;
}
}
}
return err;
}
static void __exit agp_amd64_cleanup(void)
{
if (aperture_resource)
release_resource(aperture_resource);
pci_unregister_driver(&agp_amd64_pci_driver);
}
/* On AMD64 the PCI driver needs to initialize this driver early
for the IOMMU, so it has to be called via a backdoor. */
#ifndef CONFIG_GART_IOMMU
module_init(agp_amd64_init);
module_exit(agp_amd64_cleanup);
#endif
MODULE_AUTHOR("Dave Jones <davej@codemonkey.org.uk>, Andi Kleen");
module_param(agp_try_unsupported, bool, 0);
MODULE_LICENSE("GPL");