kernel-ark/drivers/scsi/arm/oak.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

215 lines
4.6 KiB
C

/*
* Oak Generic NCR5380 driver
*
* Copyright 1995-2002, Russell King
*/
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <asm/ecard.h>
#include <asm/io.h>
#include <asm/system.h>
#include "../scsi.h"
#include <scsi/scsi_host.h>
#define AUTOSENSE
/*#define PSEUDO_DMA*/
#define OAKSCSI_PUBLIC_RELEASE 1
#define NCR5380_read(reg) oakscsi_read(_instance, reg)
#define NCR5380_write(reg, value) oakscsi_write(_instance, reg, value)
#define NCR5380_intr oakscsi_intr
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_proc_info oakscsi_proc_info
#define NCR5380_implementation_fields int port, ctrl
#define NCR5380_local_declare() struct Scsi_Host *_instance
#define NCR5380_setup(instance) _instance = instance
#define BOARD_NORMAL 0
#define BOARD_NCR53C400 1
#include "../NCR5380.h"
#undef START_DMA_INITIATOR_RECEIVE_REG
#define START_DMA_INITIATOR_RECEIVE_REG (7 + 128)
const char * oakscsi_info (struct Scsi_Host *spnt)
{
return "";
}
#define STAT(p) inw(p + 144)
extern void inswb(int from, void *to, int len);
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr,
int len)
{
int iobase = instance->io_port;
printk("writing %p len %d\n",addr, len);
if(!len) return -1;
while(1)
{
int status;
while(((status = STAT(iobase)) & 0x100)==0);
}
}
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr,
int len)
{
int iobase = instance->io_port;
printk("reading %p len %d\n", addr, len);
while(len > 0)
{
int status, timeout;
unsigned long b;
timeout = 0x01FFFFFF;
while(((status = STAT(iobase)) & 0x100)==0)
{
timeout--;
if(status & 0x200 || !timeout)
{
printk("status = %08X\n",status);
return 1;
}
}
if(len >= 128)
{
inswb(iobase + 136, addr, 128);
addr += 128;
len -= 128;
}
else
{
b = (unsigned long) inw(iobase + 136);
*addr ++ = b;
len -= 1;
if(len)
*addr ++ = b>>8;
len -= 1;
}
}
return 0;
}
#define oakscsi_read(instance,reg) (inb((instance)->io_port + (reg)))
#define oakscsi_write(instance,reg,val) (outb((val), (instance)->io_port + (reg)))
#undef STAT
#include "../NCR5380.c"
static struct scsi_host_template oakscsi_template = {
.module = THIS_MODULE,
.proc_info = oakscsi_proc_info,
.name = "Oak 16-bit SCSI",
.info = oakscsi_info,
.queuecommand = oakscsi_queue_command,
.eh_abort_handler = NCR5380_abort,
.eh_bus_reset_handler = NCR5380_bus_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "oakscsi",
};
static int __devinit
oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret = -ENOMEM;
host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
if (!host)
goto out;
host->io_port = ecard_address(ec, ECARD_MEMC, 0);
host->irq = IRQ_NONE;
host->n_io_port = 255;
ret = -EBUSY;
if (!request_region (host->io_port, host->n_io_port, "Oak SCSI"))
goto unreg;
NCR5380_init(host, 0);
printk("scsi%d: at port 0x%08lx irqs disabled",
host->host_no, host->io_port);
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
printk("\nscsi%d:", host->host_no);
NCR5380_print_options(host);
printk("\n");
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_release;
scsi_scan_host(host);
goto out;
out_release:
release_region(host->io_port, host->n_io_port);
unreg:
scsi_host_put(host);
out:
return ret;
}
static void __devexit oakscsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
ecard_set_drvdata(ec, NULL);
scsi_remove_host(host);
NCR5380_exit(host);
release_region(host->io_port, host->n_io_port);
scsi_host_put(host);
}
static const struct ecard_id oakscsi_cids[] = {
{ MANU_OAK, PROD_OAK_SCSI },
{ 0xffff, 0xffff }
};
static struct ecard_driver oakscsi_driver = {
.probe = oakscsi_probe,
.remove = __devexit_p(oakscsi_remove),
.id_table = oakscsi_cids,
.drv = {
.name = "oakscsi",
},
};
static int __init oakscsi_init(void)
{
return ecard_register_driver(&oakscsi_driver);
}
static void __exit oakscsi_exit(void)
{
ecard_remove_driver(&oakscsi_driver);
}
module_init(oakscsi_init);
module_exit(oakscsi_exit);
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("Oak SCSI driver");
MODULE_LICENSE("GPL");