1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
913 lines
20 KiB
C
913 lines
20 KiB
C
|
|
/*
|
|
* ATI Mach64 GX Support
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/sched.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <video/mach64.h>
|
|
#include "atyfb.h"
|
|
|
|
/* Definitions for the ICS 2595 == ATI 18818_1 Clockchip */
|
|
|
|
#define REF_FREQ_2595 1432 /* 14.33 MHz (exact 14.31818) */
|
|
#define REF_DIV_2595 46 /* really 43 on ICS 2595 !!! */
|
|
/* ohne Prescaler */
|
|
#define MAX_FREQ_2595 15938 /* 159.38 MHz (really 170.486) */
|
|
#define MIN_FREQ_2595 8000 /* 80.00 MHz ( 85.565) */
|
|
/* mit Prescaler 2, 4, 8 */
|
|
#define ABS_MIN_FREQ_2595 1000 /* 10.00 MHz (really 10.697) */
|
|
#define N_ADJ_2595 257
|
|
|
|
#define STOP_BITS_2595 0x1800
|
|
|
|
|
|
#define MIN_N_408 2
|
|
|
|
#define MIN_N_1703 6
|
|
|
|
#define MIN_M 2
|
|
#define MAX_M 30
|
|
#define MIN_N 35
|
|
#define MAX_N 255-8
|
|
|
|
|
|
/*
|
|
* Support Functions
|
|
*/
|
|
|
|
static void aty_dac_waste4(const struct atyfb_par *par)
|
|
{
|
|
(void) aty_ld_8(DAC_REGS, par);
|
|
|
|
(void) aty_ld_8(DAC_REGS + 2, par);
|
|
(void) aty_ld_8(DAC_REGS + 2, par);
|
|
(void) aty_ld_8(DAC_REGS + 2, par);
|
|
(void) aty_ld_8(DAC_REGS + 2, par);
|
|
}
|
|
|
|
static void aty_StrobeClock(const struct atyfb_par *par)
|
|
{
|
|
u8 tmp;
|
|
|
|
udelay(26);
|
|
|
|
tmp = aty_ld_8(CLOCK_CNTL, par);
|
|
aty_st_8(CLOCK_CNTL + par->clk_wr_offset, tmp | CLOCK_STROBE, par);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
* IBM RGB514 DAC and Clock Chip
|
|
*/
|
|
|
|
static void aty_st_514(int offset, u8 val, const struct atyfb_par *par)
|
|
{
|
|
aty_st_8(DAC_CNTL, 1, par);
|
|
/* right addr byte */
|
|
aty_st_8(DAC_W_INDEX, offset & 0xff, par);
|
|
/* left addr byte */
|
|
aty_st_8(DAC_DATA, (offset >> 8) & 0xff, par);
|
|
aty_st_8(DAC_MASK, val, par);
|
|
aty_st_8(DAC_CNTL, 0, par);
|
|
}
|
|
|
|
static int aty_set_dac_514(const struct fb_info *info,
|
|
const union aty_pll *pll, u32 bpp, u32 accel)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
static struct {
|
|
u8 pixel_dly;
|
|
u8 misc2_cntl;
|
|
u8 pixel_rep;
|
|
u8 pixel_cntl_index;
|
|
u8 pixel_cntl_v1;
|
|
} tab[3] = {
|
|
{
|
|
0, 0x41, 0x03, 0x71, 0x45}, /* 8 bpp */
|
|
{
|
|
0, 0x45, 0x04, 0x0c, 0x01}, /* 555 */
|
|
{
|
|
0, 0x45, 0x06, 0x0e, 0x00}, /* XRGB */
|
|
};
|
|
int i;
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
default:
|
|
i = 0;
|
|
break;
|
|
case 16:
|
|
i = 1;
|
|
break;
|
|
case 32:
|
|
i = 2;
|
|
break;
|
|
}
|
|
aty_st_514(0x90, 0x00, par); /* VRAM Mask Low */
|
|
aty_st_514(0x04, tab[i].pixel_dly, par); /* Horizontal Sync Control */
|
|
aty_st_514(0x05, 0x00, par); /* Power Management */
|
|
aty_st_514(0x02, 0x01, par); /* Misc Clock Control */
|
|
aty_st_514(0x71, tab[i].misc2_cntl, par); /* Misc Control 2 */
|
|
aty_st_514(0x0a, tab[i].pixel_rep, par); /* Pixel Format */
|
|
aty_st_514(tab[i].pixel_cntl_index, tab[i].pixel_cntl_v1, par);
|
|
/* Misc Control 2 / 16 BPP Control / 32 BPP Control */
|
|
return 0;
|
|
}
|
|
|
|
static int aty_var_to_pll_514(const struct fb_info *info, u32 vclk_per,
|
|
u32 bpp, union aty_pll *pll)
|
|
{
|
|
/*
|
|
* FIXME: use real calculations instead of using fixed values from the old
|
|
* driver
|
|
*/
|
|
static struct {
|
|
u32 limit; /* pixlock rounding limit (arbitrary) */
|
|
u8 m; /* (df<<6) | vco_div_count */
|
|
u8 n; /* ref_div_count */
|
|
} RGB514_clocks[7] = {
|
|
{
|
|
8000, (3 << 6) | 20, 9}, /* 7395 ps / 135.2273 MHz */
|
|
{
|
|
10000, (1 << 6) | 19, 3}, /* 9977 ps / 100.2273 MHz */
|
|
{
|
|
13000, (1 << 6) | 2, 3}, /* 12509 ps / 79.9432 MHz */
|
|
{
|
|
14000, (2 << 6) | 8, 7}, /* 13394 ps / 74.6591 MHz */
|
|
{
|
|
16000, (1 << 6) | 44, 6}, /* 15378 ps / 65.0284 MHz */
|
|
{
|
|
25000, (1 << 6) | 15, 5}, /* 17460 ps / 57.2727 MHz */
|
|
{
|
|
50000, (0 << 6) | 53, 7}, /* 33145 ps / 30.1705 MHz */
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < sizeof(RGB514_clocks) / sizeof(*RGB514_clocks);
|
|
i++)
|
|
if (vclk_per <= RGB514_clocks[i].limit) {
|
|
pll->ibm514.m = RGB514_clocks[i].m;
|
|
pll->ibm514.n = RGB514_clocks[i].n;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static u32 aty_pll_514_to_var(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
u8 df, vco_div_count, ref_div_count;
|
|
|
|
df = pll->ibm514.m >> 6;
|
|
vco_div_count = pll->ibm514.m & 0x3f;
|
|
ref_div_count = pll->ibm514.n;
|
|
|
|
return ((par->ref_clk_per * ref_div_count) << (3 - df))/
|
|
(vco_div_count + 65);
|
|
}
|
|
|
|
static void aty_set_pll_514(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
|
|
aty_st_514(0x06, 0x02, par); /* DAC Operation */
|
|
aty_st_514(0x10, 0x01, par); /* PLL Control 1 */
|
|
aty_st_514(0x70, 0x01, par); /* Misc Control 1 */
|
|
aty_st_514(0x8f, 0x1f, par); /* PLL Ref. Divider Input */
|
|
aty_st_514(0x03, 0x00, par); /* Sync Control */
|
|
aty_st_514(0x05, 0x00, par); /* Power Management */
|
|
aty_st_514(0x20, pll->ibm514.m, par); /* F0 / M0 */
|
|
aty_st_514(0x21, pll->ibm514.n, par); /* F1 / N0 */
|
|
}
|
|
|
|
const struct aty_dac_ops aty_dac_ibm514 = {
|
|
.set_dac = aty_set_dac_514,
|
|
};
|
|
|
|
const struct aty_pll_ops aty_pll_ibm514 = {
|
|
.var_to_pll = aty_var_to_pll_514,
|
|
.pll_to_var = aty_pll_514_to_var,
|
|
.set_pll = aty_set_pll_514,
|
|
};
|
|
|
|
|
|
/*
|
|
* ATI 68860-B DAC
|
|
*/
|
|
|
|
static int aty_set_dac_ATI68860_B(const struct fb_info *info,
|
|
const union aty_pll *pll, u32 bpp,
|
|
u32 accel)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
u32 gModeReg, devSetupRegA, temp, mask;
|
|
|
|
gModeReg = 0;
|
|
devSetupRegA = 0;
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
gModeReg = 0x83;
|
|
devSetupRegA =
|
|
0x60 | 0x00 /*(info->mach64DAC8Bit ? 0x00 : 0x01) */ ;
|
|
break;
|
|
case 15:
|
|
gModeReg = 0xA0;
|
|
devSetupRegA = 0x60;
|
|
break;
|
|
case 16:
|
|
gModeReg = 0xA1;
|
|
devSetupRegA = 0x60;
|
|
break;
|
|
case 24:
|
|
gModeReg = 0xC0;
|
|
devSetupRegA = 0x60;
|
|
break;
|
|
case 32:
|
|
gModeReg = 0xE3;
|
|
devSetupRegA = 0x60;
|
|
break;
|
|
}
|
|
|
|
if (!accel) {
|
|
gModeReg = 0x80;
|
|
devSetupRegA = 0x61;
|
|
}
|
|
|
|
temp = aty_ld_8(DAC_CNTL, par);
|
|
aty_st_8(DAC_CNTL, (temp & ~DAC_EXT_SEL_RS2) | DAC_EXT_SEL_RS3,
|
|
par);
|
|
|
|
aty_st_8(DAC_REGS + 2, 0x1D, par);
|
|
aty_st_8(DAC_REGS + 3, gModeReg, par);
|
|
aty_st_8(DAC_REGS, 0x02, par);
|
|
|
|
temp = aty_ld_8(DAC_CNTL, par);
|
|
aty_st_8(DAC_CNTL, temp | DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3, par);
|
|
|
|
if (info->fix.smem_len < ONE_MB)
|
|
mask = 0x04;
|
|
else if (info->fix.smem_len == ONE_MB)
|
|
mask = 0x08;
|
|
else
|
|
mask = 0x0C;
|
|
|
|
/* The following assumes that the BIOS has correctly set R7 of the
|
|
* Device Setup Register A at boot time.
|
|
*/
|
|
#define A860_DELAY_L 0x80
|
|
|
|
temp = aty_ld_8(DAC_REGS, par);
|
|
aty_st_8(DAC_REGS, (devSetupRegA | mask) | (temp & A860_DELAY_L),
|
|
par);
|
|
temp = aty_ld_8(DAC_CNTL, par);
|
|
aty_st_8(DAC_CNTL, (temp & ~(DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3)),
|
|
par);
|
|
|
|
aty_st_le32(BUS_CNTL, 0x890e20f1, par);
|
|
aty_st_le32(DAC_CNTL, 0x47052100, par);
|
|
return 0;
|
|
}
|
|
|
|
const struct aty_dac_ops aty_dac_ati68860b = {
|
|
.set_dac = aty_set_dac_ATI68860_B,
|
|
};
|
|
|
|
|
|
/*
|
|
* AT&T 21C498 DAC
|
|
*/
|
|
|
|
static int aty_set_dac_ATT21C498(const struct fb_info *info,
|
|
const union aty_pll *pll, u32 bpp,
|
|
u32 accel)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
u32 dotClock;
|
|
int muxmode = 0;
|
|
int DACMask = 0;
|
|
|
|
dotClock = 100000000 / pll->ics2595.period_in_ps;
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
if (dotClock > 8000) {
|
|
DACMask = 0x24;
|
|
muxmode = 1;
|
|
} else
|
|
DACMask = 0x04;
|
|
break;
|
|
case 15:
|
|
DACMask = 0x16;
|
|
break;
|
|
case 16:
|
|
DACMask = 0x36;
|
|
break;
|
|
case 24:
|
|
DACMask = 0xE6;
|
|
break;
|
|
case 32:
|
|
DACMask = 0xE6;
|
|
break;
|
|
}
|
|
|
|
if (1 /* info->mach64DAC8Bit */ )
|
|
DACMask |= 0x02;
|
|
|
|
aty_dac_waste4(par);
|
|
aty_st_8(DAC_REGS + 2, DACMask, par);
|
|
|
|
aty_st_le32(BUS_CNTL, 0x890e20f1, par);
|
|
aty_st_le32(DAC_CNTL, 0x00072000, par);
|
|
return muxmode;
|
|
}
|
|
|
|
const struct aty_dac_ops aty_dac_att21c498 = {
|
|
.set_dac = aty_set_dac_ATT21C498,
|
|
};
|
|
|
|
|
|
/*
|
|
* ATI 18818 / ICS 2595 Clock Chip
|
|
*/
|
|
|
|
static int aty_var_to_pll_18818(const struct fb_info *info, u32 vclk_per,
|
|
u32 bpp, union aty_pll *pll)
|
|
{
|
|
u32 MHz100; /* in 0.01 MHz */
|
|
u32 program_bits;
|
|
u32 post_divider;
|
|
|
|
/* Calculate the programming word */
|
|
MHz100 = 100000000 / vclk_per;
|
|
|
|
program_bits = -1;
|
|
post_divider = 1;
|
|
|
|
if (MHz100 > MAX_FREQ_2595) {
|
|
MHz100 = MAX_FREQ_2595;
|
|
return -EINVAL;
|
|
} else if (MHz100 < ABS_MIN_FREQ_2595) {
|
|
program_bits = 0; /* MHz100 = 257 */
|
|
return -EINVAL;
|
|
} else {
|
|
while (MHz100 < MIN_FREQ_2595) {
|
|
MHz100 *= 2;
|
|
post_divider *= 2;
|
|
}
|
|
}
|
|
MHz100 *= 1000;
|
|
MHz100 = (REF_DIV_2595 * MHz100) / REF_FREQ_2595;
|
|
|
|
MHz100 += 500; /* + 0.5 round */
|
|
MHz100 /= 1000;
|
|
|
|
if (program_bits == -1) {
|
|
program_bits = MHz100 - N_ADJ_2595;
|
|
switch (post_divider) {
|
|
case 1:
|
|
program_bits |= 0x0600;
|
|
break;
|
|
case 2:
|
|
program_bits |= 0x0400;
|
|
break;
|
|
case 4:
|
|
program_bits |= 0x0200;
|
|
break;
|
|
case 8:
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
program_bits |= STOP_BITS_2595;
|
|
|
|
pll->ics2595.program_bits = program_bits;
|
|
pll->ics2595.locationAddr = 0;
|
|
pll->ics2595.post_divider = post_divider;
|
|
pll->ics2595.period_in_ps = vclk_per;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 aty_pll_18818_to_var(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
return (pll->ics2595.period_in_ps); /* default for now */
|
|
}
|
|
|
|
static void aty_ICS2595_put1bit(u8 data, const struct atyfb_par *par)
|
|
{
|
|
u8 tmp;
|
|
|
|
data &= 0x01;
|
|
tmp = aty_ld_8(CLOCK_CNTL, par);
|
|
aty_st_8(CLOCK_CNTL + par->clk_wr_offset,
|
|
(tmp & ~0x04) | (data << 2), par);
|
|
|
|
tmp = aty_ld_8(CLOCK_CNTL, par);
|
|
aty_st_8(CLOCK_CNTL + par->clk_wr_offset, (tmp & ~0x08) | (0 << 3),
|
|
par);
|
|
|
|
aty_StrobeClock(par);
|
|
|
|
tmp = aty_ld_8(CLOCK_CNTL, par);
|
|
aty_st_8(CLOCK_CNTL + par->clk_wr_offset, (tmp & ~0x08) | (1 << 3),
|
|
par);
|
|
|
|
aty_StrobeClock(par);
|
|
return;
|
|
}
|
|
|
|
static void aty_set_pll18818(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
u32 program_bits;
|
|
u32 locationAddr;
|
|
|
|
u32 i;
|
|
|
|
u8 old_clock_cntl;
|
|
u8 old_crtc_ext_disp;
|
|
|
|
old_clock_cntl = aty_ld_8(CLOCK_CNTL, par);
|
|
aty_st_8(CLOCK_CNTL + par->clk_wr_offset, 0, par);
|
|
|
|
old_crtc_ext_disp = aty_ld_8(CRTC_GEN_CNTL + 3, par);
|
|
aty_st_8(CRTC_GEN_CNTL + 3,
|
|
old_crtc_ext_disp | (CRTC_EXT_DISP_EN >> 24), par);
|
|
|
|
mdelay(15); /* delay for 50 (15) ms */
|
|
|
|
program_bits = pll->ics2595.program_bits;
|
|
locationAddr = pll->ics2595.locationAddr;
|
|
|
|
/* Program the clock chip */
|
|
aty_st_8(CLOCK_CNTL + par->clk_wr_offset, 0, par); /* Strobe = 0 */
|
|
aty_StrobeClock(par);
|
|
aty_st_8(CLOCK_CNTL + par->clk_wr_offset, 1, par); /* Strobe = 0 */
|
|
aty_StrobeClock(par);
|
|
|
|
aty_ICS2595_put1bit(1, par); /* Send start bits */
|
|
aty_ICS2595_put1bit(0, par); /* Start bit */
|
|
aty_ICS2595_put1bit(0, par); /* Read / ~Write */
|
|
|
|
for (i = 0; i < 5; i++) { /* Location 0..4 */
|
|
aty_ICS2595_put1bit(locationAddr & 1, par);
|
|
locationAddr >>= 1;
|
|
}
|
|
|
|
for (i = 0; i < 8 + 1 + 2 + 2; i++) {
|
|
aty_ICS2595_put1bit(program_bits & 1, par);
|
|
program_bits >>= 1;
|
|
}
|
|
|
|
mdelay(1); /* delay for 1 ms */
|
|
|
|
(void) aty_ld_8(DAC_REGS, par); /* Clear DAC Counter */
|
|
aty_st_8(CRTC_GEN_CNTL + 3, old_crtc_ext_disp, par);
|
|
aty_st_8(CLOCK_CNTL + par->clk_wr_offset,
|
|
old_clock_cntl | CLOCK_STROBE, par);
|
|
|
|
mdelay(50); /* delay for 50 (15) ms */
|
|
aty_st_8(CLOCK_CNTL + par->clk_wr_offset,
|
|
((pll->ics2595.locationAddr & 0x0F) | CLOCK_STROBE), par);
|
|
return;
|
|
}
|
|
|
|
const struct aty_pll_ops aty_pll_ati18818_1 = {
|
|
.var_to_pll = aty_var_to_pll_18818,
|
|
.pll_to_var = aty_pll_18818_to_var,
|
|
.set_pll = aty_set_pll18818,
|
|
};
|
|
|
|
|
|
/*
|
|
* STG 1703 Clock Chip
|
|
*/
|
|
|
|
static int aty_var_to_pll_1703(const struct fb_info *info, u32 vclk_per,
|
|
u32 bpp, union aty_pll *pll)
|
|
{
|
|
u32 mhz100; /* in 0.01 MHz */
|
|
u32 program_bits;
|
|
/* u32 post_divider; */
|
|
u32 mach64MinFreq, mach64MaxFreq, mach64RefFreq;
|
|
u32 temp, tempB;
|
|
u16 remainder, preRemainder;
|
|
short divider = 0, tempA;
|
|
|
|
/* Calculate the programming word */
|
|
mhz100 = 100000000 / vclk_per;
|
|
mach64MinFreq = MIN_FREQ_2595;
|
|
mach64MaxFreq = MAX_FREQ_2595;
|
|
mach64RefFreq = REF_FREQ_2595; /* 14.32 MHz */
|
|
|
|
/* Calculate program word */
|
|
if (mhz100 == 0)
|
|
program_bits = 0xE0;
|
|
else {
|
|
if (mhz100 < mach64MinFreq)
|
|
mhz100 = mach64MinFreq;
|
|
if (mhz100 > mach64MaxFreq)
|
|
mhz100 = mach64MaxFreq;
|
|
|
|
divider = 0;
|
|
while (mhz100 < (mach64MinFreq << 3)) {
|
|
mhz100 <<= 1;
|
|
divider += 0x20;
|
|
}
|
|
|
|
temp = (unsigned int) (mhz100);
|
|
temp = (unsigned int) (temp * (MIN_N_1703 + 2));
|
|
temp -= (short) (mach64RefFreq << 1);
|
|
|
|
tempA = MIN_N_1703;
|
|
preRemainder = 0xffff;
|
|
|
|
do {
|
|
tempB = temp;
|
|
remainder = tempB % mach64RefFreq;
|
|
tempB = tempB / mach64RefFreq;
|
|
|
|
if ((tempB & 0xffff) <= 127
|
|
&& (remainder <= preRemainder)) {
|
|
preRemainder = remainder;
|
|
divider &= ~0x1f;
|
|
divider |= tempA;
|
|
divider =
|
|
(divider & 0x00ff) +
|
|
((tempB & 0xff) << 8);
|
|
}
|
|
|
|
temp += mhz100;
|
|
tempA++;
|
|
} while (tempA <= (MIN_N_1703 << 1));
|
|
|
|
program_bits = divider;
|
|
}
|
|
|
|
pll->ics2595.program_bits = program_bits;
|
|
pll->ics2595.locationAddr = 0;
|
|
pll->ics2595.post_divider = divider; /* fuer nix */
|
|
pll->ics2595.period_in_ps = vclk_per;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 aty_pll_1703_to_var(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
return (pll->ics2595.period_in_ps); /* default for now */
|
|
}
|
|
|
|
static void aty_set_pll_1703(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
u32 program_bits;
|
|
u32 locationAddr;
|
|
|
|
char old_crtc_ext_disp;
|
|
|
|
old_crtc_ext_disp = aty_ld_8(CRTC_GEN_CNTL + 3, par);
|
|
aty_st_8(CRTC_GEN_CNTL + 3,
|
|
old_crtc_ext_disp | (CRTC_EXT_DISP_EN >> 24), par);
|
|
|
|
program_bits = pll->ics2595.program_bits;
|
|
locationAddr = pll->ics2595.locationAddr;
|
|
|
|
/* Program clock */
|
|
aty_dac_waste4(par);
|
|
|
|
(void) aty_ld_8(DAC_REGS + 2, par);
|
|
aty_st_8(DAC_REGS + 2, (locationAddr << 1) + 0x20, par);
|
|
aty_st_8(DAC_REGS + 2, 0, par);
|
|
aty_st_8(DAC_REGS + 2, (program_bits & 0xFF00) >> 8, par);
|
|
aty_st_8(DAC_REGS + 2, (program_bits & 0xFF), par);
|
|
|
|
(void) aty_ld_8(DAC_REGS, par); /* Clear DAC Counter */
|
|
aty_st_8(CRTC_GEN_CNTL + 3, old_crtc_ext_disp, par);
|
|
return;
|
|
}
|
|
|
|
const struct aty_pll_ops aty_pll_stg1703 = {
|
|
.var_to_pll = aty_var_to_pll_1703,
|
|
.pll_to_var = aty_pll_1703_to_var,
|
|
.set_pll = aty_set_pll_1703,
|
|
};
|
|
|
|
|
|
/*
|
|
* Chrontel 8398 Clock Chip
|
|
*/
|
|
|
|
static int aty_var_to_pll_8398(const struct fb_info *info, u32 vclk_per,
|
|
u32 bpp, union aty_pll *pll)
|
|
{
|
|
u32 tempA, tempB, fOut, longMHz100, diff, preDiff;
|
|
|
|
u32 mhz100; /* in 0.01 MHz */
|
|
u32 program_bits;
|
|
/* u32 post_divider; */
|
|
u32 mach64MinFreq, mach64MaxFreq, mach64RefFreq;
|
|
u16 m, n, k = 0, save_m, save_n, twoToKth;
|
|
|
|
/* Calculate the programming word */
|
|
mhz100 = 100000000 / vclk_per;
|
|
mach64MinFreq = MIN_FREQ_2595;
|
|
mach64MaxFreq = MAX_FREQ_2595;
|
|
mach64RefFreq = REF_FREQ_2595; /* 14.32 MHz */
|
|
|
|
save_m = 0;
|
|
save_n = 0;
|
|
|
|
/* Calculate program word */
|
|
if (mhz100 == 0)
|
|
program_bits = 0xE0;
|
|
else {
|
|
if (mhz100 < mach64MinFreq)
|
|
mhz100 = mach64MinFreq;
|
|
if (mhz100 > mach64MaxFreq)
|
|
mhz100 = mach64MaxFreq;
|
|
|
|
longMHz100 = mhz100 * 256 / 100; /* 8 bit scale this */
|
|
|
|
while (mhz100 < (mach64MinFreq << 3)) {
|
|
mhz100 <<= 1;
|
|
k++;
|
|
}
|
|
|
|
twoToKth = 1 << k;
|
|
diff = 0;
|
|
preDiff = 0xFFFFFFFF;
|
|
|
|
for (m = MIN_M; m <= MAX_M; m++) {
|
|
for (n = MIN_N; n <= MAX_N; n++) {
|
|
tempA = 938356; /* 14.31818 * 65536 */
|
|
tempA *= (n + 8); /* 43..256 */
|
|
tempB = twoToKth * 256;
|
|
tempB *= (m + 2); /* 4..32 */
|
|
fOut = tempA / tempB; /* 8 bit scale */
|
|
|
|
if (longMHz100 > fOut)
|
|
diff = longMHz100 - fOut;
|
|
else
|
|
diff = fOut - longMHz100;
|
|
|
|
if (diff < preDiff) {
|
|
save_m = m;
|
|
save_n = n;
|
|
preDiff = diff;
|
|
}
|
|
}
|
|
}
|
|
|
|
program_bits = (k << 6) + (save_m) + (save_n << 8);
|
|
}
|
|
|
|
pll->ics2595.program_bits = program_bits;
|
|
pll->ics2595.locationAddr = 0;
|
|
pll->ics2595.post_divider = 0;
|
|
pll->ics2595.period_in_ps = vclk_per;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 aty_pll_8398_to_var(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
return (pll->ics2595.period_in_ps); /* default for now */
|
|
}
|
|
|
|
static void aty_set_pll_8398(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
u32 program_bits;
|
|
u32 locationAddr;
|
|
|
|
char old_crtc_ext_disp;
|
|
char tmp;
|
|
|
|
old_crtc_ext_disp = aty_ld_8(CRTC_GEN_CNTL + 3, par);
|
|
aty_st_8(CRTC_GEN_CNTL + 3,
|
|
old_crtc_ext_disp | (CRTC_EXT_DISP_EN >> 24), par);
|
|
|
|
program_bits = pll->ics2595.program_bits;
|
|
locationAddr = pll->ics2595.locationAddr;
|
|
|
|
/* Program clock */
|
|
tmp = aty_ld_8(DAC_CNTL, par);
|
|
aty_st_8(DAC_CNTL, tmp | DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3, par);
|
|
|
|
aty_st_8(DAC_REGS, locationAddr, par);
|
|
aty_st_8(DAC_REGS + 1, (program_bits & 0xff00) >> 8, par);
|
|
aty_st_8(DAC_REGS + 1, (program_bits & 0xff), par);
|
|
|
|
tmp = aty_ld_8(DAC_CNTL, par);
|
|
aty_st_8(DAC_CNTL, (tmp & ~DAC_EXT_SEL_RS2) | DAC_EXT_SEL_RS3,
|
|
par);
|
|
|
|
(void) aty_ld_8(DAC_REGS, par); /* Clear DAC Counter */
|
|
aty_st_8(CRTC_GEN_CNTL + 3, old_crtc_ext_disp, par);
|
|
|
|
return;
|
|
}
|
|
|
|
const struct aty_pll_ops aty_pll_ch8398 = {
|
|
.var_to_pll = aty_var_to_pll_8398,
|
|
.pll_to_var = aty_pll_8398_to_var,
|
|
.set_pll = aty_set_pll_8398,
|
|
};
|
|
|
|
|
|
/*
|
|
* AT&T 20C408 Clock Chip
|
|
*/
|
|
|
|
static int aty_var_to_pll_408(const struct fb_info *info, u32 vclk_per,
|
|
u32 bpp, union aty_pll *pll)
|
|
{
|
|
u32 mhz100; /* in 0.01 MHz */
|
|
u32 program_bits;
|
|
/* u32 post_divider; */
|
|
u32 mach64MinFreq, mach64MaxFreq, mach64RefFreq;
|
|
u32 temp, tempB;
|
|
u16 remainder, preRemainder;
|
|
short divider = 0, tempA;
|
|
|
|
/* Calculate the programming word */
|
|
mhz100 = 100000000 / vclk_per;
|
|
mach64MinFreq = MIN_FREQ_2595;
|
|
mach64MaxFreq = MAX_FREQ_2595;
|
|
mach64RefFreq = REF_FREQ_2595; /* 14.32 MHz */
|
|
|
|
/* Calculate program word */
|
|
if (mhz100 == 0)
|
|
program_bits = 0xFF;
|
|
else {
|
|
if (mhz100 < mach64MinFreq)
|
|
mhz100 = mach64MinFreq;
|
|
if (mhz100 > mach64MaxFreq)
|
|
mhz100 = mach64MaxFreq;
|
|
|
|
while (mhz100 < (mach64MinFreq << 3)) {
|
|
mhz100 <<= 1;
|
|
divider += 0x40;
|
|
}
|
|
|
|
temp = (unsigned int) mhz100;
|
|
temp = (unsigned int) (temp * (MIN_N_408 + 2));
|
|
temp -= ((short) (mach64RefFreq << 1));
|
|
|
|
tempA = MIN_N_408;
|
|
preRemainder = 0xFFFF;
|
|
|
|
do {
|
|
tempB = temp;
|
|
remainder = tempB % mach64RefFreq;
|
|
tempB = tempB / mach64RefFreq;
|
|
if (((tempB & 0xFFFF) <= 255)
|
|
&& (remainder <= preRemainder)) {
|
|
preRemainder = remainder;
|
|
divider &= ~0x3f;
|
|
divider |= tempA;
|
|
divider =
|
|
(divider & 0x00FF) +
|
|
((tempB & 0xFF) << 8);
|
|
}
|
|
temp += mhz100;
|
|
tempA++;
|
|
} while (tempA <= 32);
|
|
|
|
program_bits = divider;
|
|
}
|
|
|
|
pll->ics2595.program_bits = program_bits;
|
|
pll->ics2595.locationAddr = 0;
|
|
pll->ics2595.post_divider = divider; /* fuer nix */
|
|
pll->ics2595.period_in_ps = vclk_per;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 aty_pll_408_to_var(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
return (pll->ics2595.period_in_ps); /* default for now */
|
|
}
|
|
|
|
static void aty_set_pll_408(const struct fb_info *info,
|
|
const union aty_pll *pll)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
u32 program_bits;
|
|
u32 locationAddr;
|
|
|
|
u8 tmpA, tmpB, tmpC;
|
|
char old_crtc_ext_disp;
|
|
|
|
old_crtc_ext_disp = aty_ld_8(CRTC_GEN_CNTL + 3, par);
|
|
aty_st_8(CRTC_GEN_CNTL + 3,
|
|
old_crtc_ext_disp | (CRTC_EXT_DISP_EN >> 24), par);
|
|
|
|
program_bits = pll->ics2595.program_bits;
|
|
locationAddr = pll->ics2595.locationAddr;
|
|
|
|
/* Program clock */
|
|
aty_dac_waste4(par);
|
|
tmpB = aty_ld_8(DAC_REGS + 2, par) | 1;
|
|
aty_dac_waste4(par);
|
|
aty_st_8(DAC_REGS + 2, tmpB, par);
|
|
|
|
tmpA = tmpB;
|
|
tmpC = tmpA;
|
|
tmpA |= 8;
|
|
tmpB = 1;
|
|
|
|
aty_st_8(DAC_REGS, tmpB, par);
|
|
aty_st_8(DAC_REGS + 2, tmpA, par);
|
|
|
|
udelay(400); /* delay for 400 us */
|
|
|
|
locationAddr = (locationAddr << 2) + 0x40;
|
|
tmpB = locationAddr;
|
|
tmpA = program_bits >> 8;
|
|
|
|
aty_st_8(DAC_REGS, tmpB, par);
|
|
aty_st_8(DAC_REGS + 2, tmpA, par);
|
|
|
|
tmpB = locationAddr + 1;
|
|
tmpA = (u8) program_bits;
|
|
|
|
aty_st_8(DAC_REGS, tmpB, par);
|
|
aty_st_8(DAC_REGS + 2, tmpA, par);
|
|
|
|
tmpB = locationAddr + 2;
|
|
tmpA = 0x77;
|
|
|
|
aty_st_8(DAC_REGS, tmpB, par);
|
|
aty_st_8(DAC_REGS + 2, tmpA, par);
|
|
|
|
udelay(400); /* delay for 400 us */
|
|
tmpA = tmpC & (~(1 | 8));
|
|
tmpB = 1;
|
|
|
|
aty_st_8(DAC_REGS, tmpB, par);
|
|
aty_st_8(DAC_REGS + 2, tmpA, par);
|
|
|
|
(void) aty_ld_8(DAC_REGS, par); /* Clear DAC Counter */
|
|
aty_st_8(CRTC_GEN_CNTL + 3, old_crtc_ext_disp, par);
|
|
return;
|
|
}
|
|
|
|
const struct aty_pll_ops aty_pll_att20c408 = {
|
|
.var_to_pll = aty_var_to_pll_408,
|
|
.pll_to_var = aty_pll_408_to_var,
|
|
.set_pll = aty_set_pll_408,
|
|
};
|
|
|
|
|
|
/*
|
|
* Unsupported DAC and Clock Chip
|
|
*/
|
|
|
|
static int aty_set_dac_unsupported(const struct fb_info *info,
|
|
const union aty_pll *pll, u32 bpp,
|
|
u32 accel)
|
|
{
|
|
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
|
|
|
aty_st_le32(BUS_CNTL, 0x890e20f1, par);
|
|
aty_st_le32(DAC_CNTL, 0x47052100, par);
|
|
/* new in 2.2.3p1 from Geert. ???????? */
|
|
aty_st_le32(BUS_CNTL, 0x590e10ff, par);
|
|
aty_st_le32(DAC_CNTL, 0x47012100, par);
|
|
return 0;
|
|
}
|
|
|
|
static int dummy(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
const struct aty_dac_ops aty_dac_unsupported = {
|
|
.set_dac = aty_set_dac_unsupported,
|
|
};
|
|
|
|
const struct aty_pll_ops aty_pll_unsupported = {
|
|
.var_to_pll = (void *) dummy,
|
|
.pll_to_var = (void *) dummy,
|
|
.set_pll = (void *) dummy,
|
|
};
|