davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
2ade1a9b42
kernel-ark/arch/arm/mach-omap2/board-2430sdp.c
Russell King e7b3dc7ef1 [NET] smc91x: Make smc91x use IRQ resource trigger flags 
smc91x is shared between many different platforms.  Each platform needs
to specify the interrupt type, and in some cases the irq type depends
on more than just the build configuration - it depends on runtime
checks.

Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide
a way for these flags to be passed via the IRQ resource itself.

Note that IRQF_TRIGGER_* constants are intentionally defined to correspond
with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that
the low bits of PCI iomem resources correspond with the BAR flag bits.

Also provide a way to configure smc91x to read the IRQ flags from the
resource.  Once all platforms have been converted over (signified
by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should
be removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28 13:13:19 +00:00

219 lines
5.6 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/board-2430sdp.c
*
* Copyright (C) 2006 Texas Instruments
*
* Modified from mach-omap2/board-generic.c
*
* Initial Code : Based on a patch from Komal Shah and Richard Woodruff
* Updated the Code for 2430 SDP : Syed Mohammed Khasim
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
#include <asm/arch/gpmc.h>
#include "prcm-regs.h"
#include <asm/io.h>
#define SDP2430_FLASH_CS 0
#define SDP2430_SMC91X_CS 5
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0,
.size = SZ_256K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct flash_platform_data sdp2430_flash_data = {
.map_name = "cfi_probe",
.width = 2,
.parts = sdp2430_partitions,
.nr_parts = ARRAY_SIZE(sdp2430_partitions),
};
static struct resource sdp2430_flash_resource = {
.start = SDP2430_CS0_BASE,
.end = SDP2430_CS0_BASE + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device sdp2430_flash_device = {
.name = "omapflash",
.id = 0,
.dev = {
.platform_data = &sdp2430_flash_data,
},
.num_resources = 1,
.resource = &sdp2430_flash_resource,
};
static struct resource sdp2430_smc91x_resources[] = {
[0] = {
.start = SDP2430_CS0_BASE,
.end = SDP2430_CS0_BASE + SZ_64M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
static struct platform_device sdp2430_smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(sdp2430_smc91x_resources),
.resource = sdp2430_smc91x_resources,
};
static struct platform_device *sdp2430_devices[] __initdata = {
&sdp2430_smc91x_device,
&sdp2430_flash_device,
};
static inline void __init sdp2430_init_smc91x(void)
{
int eth_cs;
unsigned long cs_mem_base;
unsigned int rate;
struct clk *l3ck;
eth_cs = SDP2430_SMC91X_CS;
l3ck = clk_get(NULL, "core_l3_ck");
if (IS_ERR(l3ck))
rate = 100000000;
else
rate = clk_get_rate(l3ck);
/* Make sure CS1 timings are correct, for 2430 always muxed */
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
if (rate >= 160000000) {
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
} else if (rate >= 130000000) {
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
} else { /* rate = 100000000 */
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
}
if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
return;
}
sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
udelay(100);
if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
OMAP24XX_ETHR_GPIO_IRQ);
gpmc_cs_free(eth_cs);
return;
}
omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
}
static void __init omap_2430sdp_init_irq(void)
{
omap2_init_common_hw();
omap_init_irq();
omap_gpio_init();
sdp2430_init_smc91x();
}
static struct omap_uart_config sdp2430_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_UART, &sdp2430_uart_config},
};
static void __init omap_2430sdp_init(void)
{
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_board_config = sdp2430_config;
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap_serial_init();
}
static void __init omap_2430sdp_map_io(void)
{
omap2_map_common_io();
}
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_2430sdp_map_io,
.init_irq = omap_2430sdp_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap_timer,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink