kernel-ark/drivers/i2c/chips/pcf8574.c
Jean Delvare 833bedb813 i2c: Convert the pcf8574 driver to a new-style i2c driver
The new-style pcf8574 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Warning: users will now have to use the force module parameter to get
the driver to attach to their device. That's not a bad thing as these
devices can't be detected anyway.

Note that this doesn't change the fact that this driver is deprecated
in favor of gpio/pcf857x.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16 19:30:06 +02:00

216 lines
5.4 KiB
C

/*
Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Dan Eaton <dan.eaton@rocketlogix.com>
Ported to Linux 2.6 by Aurelien Jarno <aurel32@debian.org> with
the help of Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* A few notes about the PCF8574:
* The PCF8574 is an 8-bit I/O expander for the I2C bus produced by
Philips Semiconductors. It is designed to provide a byte I2C
interface to up to 8 separate devices.
* The PCF8574 appears as a very simple SMBus device which can be
read from or written to with SMBUS byte read/write accesses.
--Dan
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
/* Addresses to scan: none, device can't be detected */
static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
/* Each client has this additional data */
struct pcf8574_data {
int write; /* Remember last written value */
};
static void pcf8574_init_client(struct i2c_client *client);
/* following are the sysfs callback functions */
static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
return sprintf(buf, "%u\n", i2c_smbus_read_byte(client));
}
static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf)
{
struct pcf8574_data *data = i2c_get_clientdata(to_i2c_client(dev));
if (data->write < 0)
return data->write;
return sprintf(buf, "%d\n", data->write);
}
static ssize_t set_write(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct pcf8574_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
if (val > 0xff)
return -EINVAL;
data->write = val;
i2c_smbus_write_byte(client, data->write);
return count;
}
static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
static struct attribute *pcf8574_attributes[] = {
&dev_attr_read.attr,
&dev_attr_write.attr,
NULL
};
static const struct attribute_group pcf8574_attr_group = {
.attrs = pcf8574_attributes,
};
/*
* Real code
*/
/* Return 0 if detection is successful, -ENODEV otherwise */
static int pcf8574_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
const char *client_name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
return -ENODEV;
/* Now, we would do the remaining detection. But the PCF8574 is plainly
impossible to detect! Stupid chip. */
/* Determine the chip type */
if (kind <= 0) {
if (client->addr >= 0x38 && client->addr <= 0x3f)
kind = pcf8574a;
else
kind = pcf8574;
}
if (kind == pcf8574a)
client_name = "pcf8574a";
else
client_name = "pcf8574";
strlcpy(info->type, client_name, I2C_NAME_SIZE);
return 0;
}
static int pcf8574_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct pcf8574_data *data;
int err;
data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
i2c_set_clientdata(client, data);
/* Initialize the PCF8574 chip */
pcf8574_init_client(client);
/* Register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group);
if (err)
goto exit_free;
return 0;
exit_free:
kfree(data);
exit:
return err;
}
static int pcf8574_remove(struct i2c_client *client)
{
sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group);
kfree(i2c_get_clientdata(client));
return 0;
}
/* Called when we have found a new PCF8574. */
static void pcf8574_init_client(struct i2c_client *client)
{
struct pcf8574_data *data = i2c_get_clientdata(client);
data->write = -EAGAIN;
}
static const struct i2c_device_id pcf8574_id[] = {
{ "pcf8574", 0 },
{ "pcf8574a", 0 },
{ }
};
static struct i2c_driver pcf8574_driver = {
.driver = {
.name = "pcf8574",
},
.probe = pcf8574_probe,
.remove = pcf8574_remove,
.id_table = pcf8574_id,
.detect = pcf8574_detect,
.address_data = &addr_data,
};
static int __init pcf8574_init(void)
{
return i2c_add_driver(&pcf8574_driver);
}
static void __exit pcf8574_exit(void)
{
i2c_del_driver(&pcf8574_driver);
}
MODULE_AUTHOR
("Frodo Looijaard <frodol@dds.nl>, "
"Philip Edelbrock <phil@netroedge.com>, "
"Dan Eaton <dan.eaton@rocketlogix.com> "
"and Aurelien Jarno <aurelien@aurel32.net>");
MODULE_DESCRIPTION("PCF8574 driver");
MODULE_LICENSE("GPL");
module_init(pcf8574_init);
module_exit(pcf8574_exit);