dbc0416104
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
131 lines
4.9 KiB
C
131 lines
4.9 KiB
C
/*
|
|
* opp2420_data.c - old-style "OPP" table for OMAP2420
|
|
*
|
|
* Copyright (C) 2005-2009 Texas Instruments, Inc.
|
|
* Copyright (C) 2004-2009 Nokia Corporation
|
|
*
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
*
|
|
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
|
|
* These configurations are characterized by voltage and speed for clocks.
|
|
* The device is only validated for certain combinations. One way to express
|
|
* these combinations is via the 'ratios' which the clocks operate with
|
|
* respect to each other. These ratio sets are for a given voltage/DPLL
|
|
* setting. All configurations can be described by a DPLL setting and a ratio.
|
|
*
|
|
* XXX Missing voltage data.
|
|
* XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
|
|
*
|
|
* THe format described in this file is deprecated. Once a reasonable
|
|
* OPP API exists, the data in this file should be converted to use it.
|
|
*
|
|
* This is technically part of the OMAP2xxx clock code.
|
|
*
|
|
* Considerable work is still needed to fully support dynamic frequency
|
|
* changes on OMAP2xxx-series chips. Readers interested in such a
|
|
* project are encouraged to review the Maemo Diablo RX-34 and RX-44
|
|
* kernel source at:
|
|
* http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include "opp2xxx.h"
|
|
#include "sdrc.h"
|
|
#include "clock.h"
|
|
|
|
/*
|
|
* Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
|
|
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
|
|
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
|
|
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
|
|
*
|
|
* Filling in table based on H4 boards available. There are quite a
|
|
* few more rate combinations which could be defined.
|
|
*
|
|
* When multiple values are defined the start up will try and choose
|
|
* the fastest one. If a 'fast' value is defined, then automatically,
|
|
* the /2 one should be included as it can be used. Generally having
|
|
* more than one fast set does not make sense, as static timings need
|
|
* to be changed to change the set. The exception is the bypass
|
|
* setting which is available for low power bypass.
|
|
*
|
|
* Note: This table needs to be sorted, fastest to slowest.
|
|
**/
|
|
const struct prcm_config omap2420_rate_table[] = {
|
|
/* PRCM I - FAST */
|
|
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
|
|
RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
|
|
RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM II - FAST */
|
|
{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
|
|
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
|
|
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_242X},
|
|
|
|
{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
|
|
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
|
|
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM III - FAST */
|
|
{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
|
|
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
|
|
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_242X},
|
|
|
|
{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
|
|
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
|
|
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM II - SLOW */
|
|
{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
|
|
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
|
|
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_242X},
|
|
|
|
{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
|
|
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
|
|
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM III - SLOW */
|
|
{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
|
|
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
|
|
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_242X},
|
|
|
|
{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
|
|
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
|
|
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM-VII (boot-bypass) */
|
|
{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
|
|
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
|
|
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM-VII (boot-bypass) */
|
|
{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
|
|
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
|
|
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
|
|
RATE_IN_242X},
|
|
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
};
|