27f8b13555
This is a new driver for the Honeywell Humidicon HIH-6130/HIH-6131 humidity sensor. The driver is based on the existing Sensiron sht21 driver with the necessary changes to the probe, update_measurements and conversion functions necessary to use the Honeywell sensors. There's no difference between the 6130 & 6131 other than the 6131 having an external condensation filter attached. Signed-off-by: Iain Paton <ipaton0@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
1443 lines
44 KiB
Plaintext
1443 lines
44 KiB
Plaintext
#
|
|
# Hardware monitoring chip drivers configuration
|
|
#
|
|
|
|
menuconfig HWMON
|
|
tristate "Hardware Monitoring support"
|
|
depends on HAS_IOMEM
|
|
default y
|
|
help
|
|
Hardware monitoring devices let you monitor the hardware health
|
|
of a system. Most modern motherboards include such a device. It
|
|
can include temperature sensors, voltage sensors, fan speed
|
|
sensors and various additional features such as the ability to
|
|
control the speed of the fans. If you want this support you
|
|
should say Y here and also to the specific driver(s) for your
|
|
sensors chip(s) below.
|
|
|
|
To find out which specific driver(s) you need, use the
|
|
sensors-detect script from the lm_sensors package. Read
|
|
<file:Documentation/hwmon/userspace-tools> for details.
|
|
|
|
This support can also be built as a module. If so, the module
|
|
will be called hwmon.
|
|
|
|
if HWMON
|
|
|
|
config HWMON_VID
|
|
tristate
|
|
default n
|
|
|
|
config HWMON_DEBUG_CHIP
|
|
bool "Hardware Monitoring Chip debugging messages"
|
|
default n
|
|
help
|
|
Say Y here if you want the I2C chip drivers to produce a bunch of
|
|
debug messages to the system log. Select this if you are having
|
|
a problem with I2C support and want to see more of what is going
|
|
on.
|
|
|
|
comment "Native drivers"
|
|
|
|
config SENSORS_ABITUGURU
|
|
tristate "Abit uGuru (rev 1 & 2)"
|
|
depends on X86 && DMI && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the sensor part of the first
|
|
and second revision of the Abit uGuru chip. The voltage and frequency
|
|
control parts of the Abit uGuru are not supported. The Abit uGuru
|
|
chip can be found on Abit uGuru featuring motherboards (most modern
|
|
Abit motherboards from before end 2005). For more info and a list
|
|
of which motherboards have which revision see
|
|
Documentation/hwmon/abituguru
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called abituguru.
|
|
|
|
config SENSORS_ABITUGURU3
|
|
tristate "Abit uGuru (rev 3)"
|
|
depends on X86 && DMI && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the sensor part of the
|
|
third revision of the Abit uGuru chip. Only reading the sensors
|
|
and their settings is supported. The third revision of the Abit
|
|
uGuru chip can be found on recent Abit motherboards (since end
|
|
2005). For more info and a list of which motherboards have which
|
|
revision see Documentation/hwmon/abituguru3
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called abituguru3.
|
|
|
|
config SENSORS_AD7314
|
|
tristate "Analog Devices AD7314 and compatibles"
|
|
depends on SPI && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7314, ADT7301 and ADT7302 temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7314.
|
|
|
|
config SENSORS_AD7414
|
|
tristate "Analog Devices AD7414"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7414 temperature monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7414.
|
|
|
|
config SENSORS_AD7418
|
|
tristate "Analog Devices AD7416, AD7417 and AD7418"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7416, AD7417 and AD7418 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7418.
|
|
|
|
config SENSORS_ADCXX
|
|
tristate "National Semiconductor ADCxxxSxxx"
|
|
depends on SPI_MASTER && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
ADC<bb><c>S<sss> chip family, where
|
|
* bb is the resolution in number of bits (8, 10, 12)
|
|
* c is the number of channels (1, 2, 4, 8)
|
|
* sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
|
|
kSPS and 101 for 1 MSPS)
|
|
|
|
Examples : ADC081S101, ADC124S501, ...
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adcxx.
|
|
|
|
config SENSORS_ADM1021
|
|
tristate "Analog Devices ADM1021 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1021
|
|
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
|
|
Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1021.
|
|
|
|
config SENSORS_ADM1025
|
|
tristate "Analog Devices ADM1025 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1025
|
|
and Philips NE1619 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1025.
|
|
|
|
config SENSORS_ADM1026
|
|
tristate "Analog Devices ADM1026 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1026
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1026.
|
|
|
|
config SENSORS_ADM1029
|
|
tristate "Analog Devices ADM1029"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1029
|
|
sensor chip.
|
|
Very rare chip, please let us know you use it.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1029.
|
|
|
|
config SENSORS_ADM1031
|
|
tristate "Analog Devices ADM1031 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1031
|
|
and ADM1030 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1031.
|
|
|
|
config SENSORS_ADM9240
|
|
tristate "Analog Devices ADM9240 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM9240,
|
|
Dallas DS1780, National Semiconductor LM81 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm9240.
|
|
|
|
config SENSORS_ADT7411
|
|
tristate "Analog Devices ADT7411"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7411 voltage and temperature monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7411.
|
|
|
|
config SENSORS_ADT7462
|
|
tristate "Analog Devices ADT7462"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7462 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7462.
|
|
|
|
config SENSORS_ADT7470
|
|
tristate "Analog Devices ADT7470"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7470 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7470.
|
|
|
|
config SENSORS_ADT7475
|
|
tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
|
|
chips.
|
|
|
|
This driver can also be build as a module. If so, the module
|
|
will be called adt7475.
|
|
|
|
config SENSORS_ASC7621
|
|
tristate "Andigilog aSC7621"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the aSC7621
|
|
family of SMBus sensors chip found on most Intel X38, X48, X58,
|
|
945, 965 and 975 desktop boards. Currently supported chips:
|
|
aSC7621
|
|
aSC7621a
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asc7621.
|
|
|
|
config SENSORS_K8TEMP
|
|
tristate "AMD Athlon64/FX or Opteron temperature sensor"
|
|
depends on X86 && PCI && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor(s) inside your CPU. Supported is whole AMD K8
|
|
microarchitecture. Please note that you will need at least
|
|
lm-sensors 2.10.1 for proper userspace support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called k8temp.
|
|
|
|
config SENSORS_K10TEMP
|
|
tristate "AMD Family 10h+ temperature sensor"
|
|
depends on X86 && PCI
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor(s) inside your CPU. Supported are later revisions of
|
|
the AMD Family 10h and all revisions of the AMD Family 11h,
|
|
12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
|
|
microarchitectures.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called k10temp.
|
|
|
|
config SENSORS_FAM15H_POWER
|
|
tristate "AMD Family 15h processor power"
|
|
depends on X86 && PCI
|
|
help
|
|
If you say yes here you get support for processor power
|
|
information of your AMD family 15h CPU.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fam15h_power.
|
|
|
|
config SENSORS_ASB100
|
|
tristate "Asus ASB100 Bach"
|
|
depends on X86 && I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the ASB100 Bach sensor
|
|
chip found on some Asus mainboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asb100.
|
|
|
|
config SENSORS_ATXP1
|
|
tristate "Attansic ATXP1 VID controller"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Attansic ATXP1 VID
|
|
controller.
|
|
|
|
If your board have such a chip, you are able to control your CPU
|
|
core and other voltages.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called atxp1.
|
|
|
|
config SENSORS_DS620
|
|
tristate "Dallas Semiconductor DS620"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Dallas Semiconductor
|
|
DS620 sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ds620.
|
|
|
|
config SENSORS_DS1621
|
|
tristate "Dallas Semiconductor DS1621 and DS1625"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Dallas Semiconductor
|
|
DS1621 and DS1625 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ds1621.
|
|
|
|
config SENSORS_DA9052_ADC
|
|
tristate "Dialog DA9052/DA9053 ADC"
|
|
depends on PMIC_DA9052
|
|
help
|
|
Say y here to support the ADC found on Dialog Semiconductor
|
|
DA9052-BC and DA9053-AA/Bx PMICs.
|
|
|
|
This driver can also be built as module. If so, the module
|
|
will be called da9052-hwmon.
|
|
|
|
config SENSORS_EXYNOS4_TMU
|
|
tristate "Temperature sensor on Samsung EXYNOS4"
|
|
depends on ARCH_EXYNOS4
|
|
help
|
|
If you say yes here you get support for TMU (Thermal Management
|
|
Unit) on SAMSUNG EXYNOS4 series of SoC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called exynos4-tmu.
|
|
|
|
config SENSORS_I5K_AMB
|
|
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
|
|
depends on PCI && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for FB-DIMM AMB temperature
|
|
monitoring chips on systems with the Intel 5000 series chipset.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i5k_amb.
|
|
|
|
config SENSORS_F71805F
|
|
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
|
|
Super-I/O chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f71805f.
|
|
|
|
config SENSORS_F71882FG
|
|
tristate "Fintek F71882FG and compatibles"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of many Fintek Super-I/O (LPC) chips. The currently
|
|
supported chips are:
|
|
F71808E/A
|
|
F71858FG
|
|
F71862FG
|
|
F71863FG
|
|
F71869F/E/A
|
|
F71882FG
|
|
F71883FG
|
|
F71889FG/ED/A
|
|
F8000
|
|
F81801U
|
|
F81865F
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f71882fg.
|
|
|
|
config SENSORS_F75375S
|
|
tristate "Fintek F75375S/SP, F75373 and F75387"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F75375S/SP, F75373 and F75387
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f75375s.
|
|
|
|
config SENSORS_FSCHMD
|
|
tristate "Fujitsu Siemens Computers sensor chips"
|
|
depends on X86 && I2C
|
|
help
|
|
If you say yes here you get support for the following Fujitsu
|
|
Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
|
|
Heimdall, Heracles, Hades and Syleus including support for the
|
|
integrated watchdog.
|
|
|
|
This is a merged driver for FSC sensor chips replacing the fscpos,
|
|
fscscy and fscher drivers and adding support for several other FSC
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fschmd.
|
|
|
|
config SENSORS_G760A
|
|
tristate "GMT G760A"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Global Mixed-mode
|
|
Technology Inc G760A fan speed PWM controller chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called g760a.
|
|
|
|
config SENSORS_GL518SM
|
|
tristate "Genesys Logic GL518SM"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL518SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl518sm.
|
|
|
|
config SENSORS_GL520SM
|
|
tristate "Genesys Logic GL520SM"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL520SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl520sm.
|
|
|
|
config SENSORS_GPIO_FAN
|
|
tristate "GPIO fan"
|
|
depends on GPIOLIB
|
|
help
|
|
If you say yes here you get support for fans connected to GPIO lines.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gpio-fan.
|
|
|
|
config SENSORS_HIH6130
|
|
tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for Honeywell Humidicon
|
|
HIH-6130 and HIH-6131 Humidicon humidity sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called hih6130.
|
|
|
|
config SENSORS_CORETEMP
|
|
tristate "Intel Core/Core2/Atom temperature sensor"
|
|
depends on X86 && PCI && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside your CPU. Most of the family 6 CPUs
|
|
are supported. Check Documentation/hwmon/coretemp for details.
|
|
|
|
config SENSORS_IBMAEM
|
|
tristate "IBM Active Energy Manager temperature/power sensors and control"
|
|
select IPMI_SI
|
|
depends on IPMI_HANDLER
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
power sensors and capping hardware in various IBM System X
|
|
servers that support Active Energy Manager. This includes
|
|
the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
|
|
and certain HC10/HS2x/LS2x/QS2x blades.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmaem.
|
|
|
|
config SENSORS_IBMPEX
|
|
tristate "IBM PowerExecutive temperature/power sensors"
|
|
select IPMI_SI
|
|
depends on IPMI_HANDLER
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
power sensors in various IBM System X servers that support
|
|
PowerExecutive. So far this includes the x3350, x3550, x3650,
|
|
x3655, and x3755; the x3800, x3850, and x3950 models that have
|
|
PCI Express; and some of the HS2x, LS2x, and QS2x blades.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmpex.
|
|
|
|
config SENSORS_IT87
|
|
tristate "ITE IT87xx and compatibles"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for ITE IT8705F, IT8712F,
|
|
IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F and IT8758E
|
|
sensor chips, and the SiS960 clone.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called it87.
|
|
|
|
config SENSORS_JZ4740
|
|
tristate "Ingenic JZ4740 SoC ADC driver"
|
|
depends on MACH_JZ4740 && MFD_JZ4740_ADC
|
|
help
|
|
If you say yes here you get support for reading adc values from the ADCIN
|
|
pin on Ingenic JZ4740 SoC based boards.
|
|
|
|
This driver can also be build as a module. If so, the module will be
|
|
called jz4740-hwmon.
|
|
|
|
config SENSORS_JC42
|
|
tristate "JEDEC JC42.4 compliant memory module temperature sensors"
|
|
depends on I2C
|
|
help
|
|
If you say yes here, you get support for JEDEC JC42.4 compliant
|
|
temperature sensors, which are used on many DDR3 memory modules for
|
|
mobile devices and servers. Support will include, but not be limited
|
|
to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
|
|
MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002,
|
|
STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called jc42.
|
|
|
|
config SENSORS_LINEAGE
|
|
tristate "Lineage Compact Power Line Power Entry Module"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Lineage Compact Power Line
|
|
series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
|
|
CP2000DC, CP2725, and others.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lineage-pem.
|
|
|
|
config SENSORS_LM63
|
|
tristate "National Semiconductor LM63 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the National
|
|
Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
|
|
sensors with integrated fan control. Such chips are found
|
|
on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
|
|
others.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm63.
|
|
|
|
config SENSORS_LM70
|
|
tristate "National Semiconductor LM70 / Texas Instruments TMP121"
|
|
depends on SPI_MASTER
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
LM70 and Texas Instruments TMP121/TMP123 digital temperature
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm70.
|
|
|
|
config SENSORS_LM73
|
|
tristate "National Semiconductor LM73"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM73
|
|
sensor chips.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm73.
|
|
|
|
config SENSORS_LM75
|
|
tristate "National Semiconductor LM75 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for one common type of
|
|
temperature sensor chip, with models including:
|
|
|
|
- Analog Devices ADT75
|
|
- Dallas Semiconductor DS75 and DS1775
|
|
- Maxim MAX6625 and MAX6626
|
|
- Microchip MCP980x
|
|
- National Semiconductor LM75, LM75A
|
|
- NXP's LM75A
|
|
- ST Microelectronics STDS75
|
|
- TelCom (now Microchip) TCN75
|
|
- Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
|
|
TMP275
|
|
|
|
This driver supports driver model based binding through board
|
|
specific I2C device tables.
|
|
|
|
It also supports the "legacy" style of driver binding. To use
|
|
that with some chips which don't replicate LM75 quirks exactly,
|
|
you may need the "force" module parameter.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm75.
|
|
|
|
config SENSORS_LM77
|
|
tristate "National Semiconductor LM77"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM77
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm77.
|
|
|
|
config SENSORS_LM78
|
|
tristate "National Semiconductor LM78 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM78,
|
|
LM78-J and LM79.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm78.
|
|
|
|
config SENSORS_LM80
|
|
tristate "National Semiconductor LM80 and LM96080"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM80 and LM96080 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm80.
|
|
|
|
config SENSORS_LM83
|
|
tristate "National Semiconductor LM83 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM82 and LM83 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm83.
|
|
|
|
config SENSORS_LM85
|
|
tristate "National Semiconductor LM85 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM85
|
|
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
|
|
EMC6D101, EMC6D102, and EMC6D103.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm85.
|
|
|
|
config SENSORS_LM87
|
|
tristate "National Semiconductor LM87 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM87
|
|
and Analog Devices ADM1024 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm87.
|
|
|
|
config SENSORS_LM90
|
|
tristate "National Semiconductor LM90 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM90,
|
|
LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
|
|
Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
|
|
MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
|
|
Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm90.
|
|
|
|
config SENSORS_LM92
|
|
tristate "National Semiconductor LM92 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM92
|
|
and Maxim MAX6635 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm92.
|
|
|
|
config SENSORS_LM93
|
|
tristate "National Semiconductor LM93 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM93,
|
|
LM94, and compatible sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm93.
|
|
|
|
config SENSORS_LTC4151
|
|
tristate "Linear Technology LTC4151"
|
|
depends on I2C
|
|
default n
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4151
|
|
High Voltage I2C Current and Voltage Monitor interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4151.
|
|
|
|
config SENSORS_LTC4215
|
|
tristate "Linear Technology LTC4215"
|
|
depends on I2C && EXPERIMENTAL
|
|
default n
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4215
|
|
Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4215.
|
|
|
|
config SENSORS_LTC4245
|
|
tristate "Linear Technology LTC4245"
|
|
depends on I2C && EXPERIMENTAL
|
|
default n
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4245
|
|
Multiple Supply Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4245.
|
|
|
|
config SENSORS_LTC4261
|
|
tristate "Linear Technology LTC4261"
|
|
depends on I2C && EXPERIMENTAL
|
|
default n
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4261
|
|
Negative Voltage Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4261.
|
|
|
|
config SENSORS_LM95241
|
|
tristate "National Semiconductor LM95241 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for LM95231 and LM95241 sensor
|
|
chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm95241.
|
|
|
|
config SENSORS_LM95245
|
|
tristate "National Semiconductor LM95245 sensor chip"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for LM95245 sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm95245.
|
|
|
|
config SENSORS_MAX1111
|
|
tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
|
|
depends on SPI_MASTER
|
|
help
|
|
Say y here to support Maxim's MAX1111 ADC chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1111.
|
|
|
|
config SENSORS_MAX16065
|
|
tristate "Maxim MAX16065 System Manager and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
capabilities of the following Maxim System Manager chips.
|
|
MAX16065
|
|
MAX16066
|
|
MAX16067
|
|
MAX16068
|
|
MAX16070
|
|
MAX16071
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max16065.
|
|
|
|
config SENSORS_MAX1619
|
|
tristate "Maxim MAX1619 sensor chip"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MAX1619 sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1619.
|
|
|
|
config SENSORS_MAX1668
|
|
tristate "Maxim MAX1668 and compatibles"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for MAX1668, MAX1989 and
|
|
MAX1805 chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1668.
|
|
|
|
config SENSORS_MAX6639
|
|
tristate "Maxim MAX6639 sensor chip"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the MAX6639
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6639.
|
|
|
|
config SENSORS_MAX6642
|
|
tristate "Maxim MAX6642 sensor chip"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for MAX6642 sensor chip.
|
|
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
|
|
with Overtemperature Alarm from Maxim.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6642.
|
|
|
|
config SENSORS_MAX6650
|
|
tristate "Maxim MAX6650 sensor chip"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the MAX6650 / MAX6651
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6650.
|
|
|
|
config SENSORS_MCP3021
|
|
tristate "Microchip MCP3021"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the MCP3021 chip
|
|
that is a A/D converter (ADC) with 10-bit resolution.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called mcp3021.
|
|
|
|
config SENSORS_NTC_THERMISTOR
|
|
tristate "NTC thermistor support"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
This driver supports NTC thermistors sensor reading and its
|
|
interpretation. The driver can also monitor the temperature and
|
|
send notifications about the temperature.
|
|
|
|
Currently, this driver supports
|
|
NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ntc-thermistor.
|
|
|
|
config SENSORS_PC87360
|
|
tristate "National Semiconductor PC87360 family"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC8736x Super-I/O chips.
|
|
The PC87360, PC87363 and PC87364 only have fan monitoring and
|
|
control. The PC87365 and PC87366 additionally have voltage and
|
|
temperature monitoring.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87360.
|
|
|
|
config SENSORS_PC87427
|
|
tristate "National Semiconductor PC87427"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC87427 Super-I/O chip.
|
|
The chip has two distinct logical devices, one for fan speed
|
|
monitoring and control, and one for voltage and temperature
|
|
monitoring. Fan speed monitoring and control are supported, as
|
|
well as temperature monitoring. Voltages aren't supported yet.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87427.
|
|
|
|
config SENSORS_PCF8591
|
|
tristate "Philips PCF8591 ADC/DAC"
|
|
depends on I2C
|
|
default n
|
|
help
|
|
If you say yes here you get support for Philips PCF8591 4-channel
|
|
ADC, 1-channel DAC chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pcf8591.
|
|
|
|
These devices are hard to detect and rarely found on mainstream
|
|
hardware. If unsure, say N.
|
|
|
|
source drivers/hwmon/pmbus/Kconfig
|
|
|
|
config SENSORS_SHT15
|
|
tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
|
|
depends on GPIOLIB
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT10, SHT11,
|
|
SHT15, SHT71, SHT75 humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht15.
|
|
|
|
config SENSORS_SHT21
|
|
tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT21, SHT25
|
|
humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht21.
|
|
|
|
config SENSORS_S3C
|
|
tristate "Samsung built-in ADC"
|
|
depends on S3C_ADC
|
|
help
|
|
If you say yes here you get support for the on-board ADCs of
|
|
the Samsung S3C24XX, S3C64XX and other series of SoC
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called s3c-hwmon.
|
|
|
|
config SENSORS_S3C_RAW
|
|
bool "Include raw channel attributes in sysfs"
|
|
depends on SENSORS_S3C
|
|
help
|
|
Say Y here if you want to include raw copies of all the ADC
|
|
channels in sysfs.
|
|
|
|
config SENSORS_SIS5595
|
|
tristate "Silicon Integrated Systems Corp. SiS5595"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
SiS5595 South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sis5595.
|
|
|
|
config SENSORS_SMM665
|
|
tristate "Summit Microelectronics SMM665"
|
|
depends on I2C && EXPERIMENTAL
|
|
default n
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
features of the Summit Microelectronics SMM665/SMM665B Six-Channel
|
|
Active DC Output Controller / Monitor.
|
|
|
|
Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
|
|
Support for those chips is untested.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called smm665.
|
|
|
|
config SENSORS_DME1737
|
|
tristate "SMSC DME1737, SCH311x and compatibles"
|
|
depends on I2C && EXPERIMENTAL && !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
|
|
Asus A8000 Super-I/O chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called dme1737.
|
|
|
|
config SENSORS_EMC1403
|
|
tristate "SMSC EMC1403/23 thermal sensor"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the SMSC EMC1403/23
|
|
temperature monitoring chip.
|
|
|
|
Threshold values can be configured using sysfs.
|
|
Data from the different diodes are accessible via sysfs.
|
|
|
|
config SENSORS_EMC2103
|
|
tristate "SMSC EMC2103"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
and fan sensors of the SMSC EMC2103 chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called emc2103.
|
|
|
|
config SENSORS_EMC6W201
|
|
tristate "SMSC EMC6W201"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the SMSC EMC6W201
|
|
hardware monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called emc6w201.
|
|
|
|
config SENSORS_SMSC47M1
|
|
tristate "SMSC LPC47M10x and compatibles"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for the integrated fan
|
|
monitoring and control capabilities of the SMSC LPC47B27x,
|
|
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
|
|
LPC47M192, LPC47M292 and LPC47M997 chips.
|
|
|
|
The temperature and voltage sensor features of the LPC47M15x,
|
|
LPC47M192, LPC47M292 and LPC47M997 are supported by another
|
|
driver, select also "SMSC LPC47M192 and compatibles" below for
|
|
those.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m1.
|
|
|
|
config SENSORS_SMSC47M192
|
|
tristate "SMSC LPC47M192 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
|
|
and LPC47M997 chips.
|
|
|
|
The fan monitoring and control capabilities of these chips
|
|
are supported by another driver, select
|
|
"SMSC LPC47M10x and compatibles" above. You need both drivers
|
|
if you want fan control and voltage/temperature sensor support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m192.
|
|
|
|
config SENSORS_SMSC47B397
|
|
tristate "SMSC LPC47B397-NC"
|
|
depends on EXPERIMENTAL && !PPC
|
|
help
|
|
If you say yes here you get support for the SMSC LPC47B397-NC
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47b397.
|
|
|
|
config SENSORS_SCH56XX_COMMON
|
|
tristate
|
|
default n
|
|
|
|
config SENSORS_SCH5627
|
|
tristate "SMSC SCH5627"
|
|
depends on !PPC && WATCHDOG
|
|
select SENSORS_SCH56XX_COMMON
|
|
select WATCHDOG_CORE
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
features of the SMSC SCH5627 Super-I/O chip including support for
|
|
the integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sch5627.
|
|
|
|
config SENSORS_SCH5636
|
|
tristate "SMSC SCH5636"
|
|
depends on !PPC && WATCHDOG
|
|
select SENSORS_SCH56XX_COMMON
|
|
select WATCHDOG_CORE
|
|
help
|
|
SMSC SCH5636 Super I/O chips include an embedded microcontroller for
|
|
hardware monitoring solutions, allowing motherboard manufacturers to
|
|
create their own custom hwmon solution based upon the SCH5636.
|
|
|
|
Currently this driver only supports the Fujitsu Theseus SCH5636 based
|
|
hwmon solution. Say yes here if you want support for the Fujitsu
|
|
Theseus' hardware monitoring features including support for the
|
|
integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sch5636.
|
|
|
|
config SENSORS_ADS1015
|
|
tristate "Texas Instruments ADS1015"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments ADS1015
|
|
12-bit 4-input ADC device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ads1015.
|
|
|
|
config SENSORS_ADS7828
|
|
tristate "Texas Instruments ADS7828"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments ADS7828
|
|
12-bit 8-channel ADC device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ads7828.
|
|
|
|
config SENSORS_ADS7871
|
|
tristate "Texas Instruments ADS7871 A/D converter"
|
|
depends on SPI
|
|
help
|
|
If you say yes here you get support for TI ADS7871 & ADS7870
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ads7871.
|
|
|
|
config SENSORS_AMC6821
|
|
tristate "Texas Instruments AMC6821"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Texas Instruments
|
|
AMC6821 hardware monitoring chips.
|
|
|
|
This driver can also be build as a module. If so, the module
|
|
will be called amc6821.
|
|
|
|
config SENSORS_INA2XX
|
|
tristate "Texas Instruments INA219, INA226"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for INA219 and INA226 power
|
|
monitor chips.
|
|
|
|
The INA2xx driver is configured for the default configuration of
|
|
the part as described in the datasheet.
|
|
Default value for Rshunt is 10 mOhms.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ina2xx.
|
|
|
|
config SENSORS_THMC50
|
|
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments THMC50
|
|
sensor chips and clones: the Analog Devices ADM1022.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called thmc50.
|
|
|
|
config SENSORS_TMP102
|
|
tristate "Texas Instruments TMP102"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP102
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp102.
|
|
|
|
config SENSORS_TMP401
|
|
tristate "Texas Instruments TMP401 and compatibles"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP401 and
|
|
TMP411 temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp401.
|
|
|
|
config SENSORS_TMP421
|
|
tristate "Texas Instruments TMP421 and compatible"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP421,
|
|
TMP422 and TMP423 temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp421.
|
|
|
|
config SENSORS_TWL4030_MADC
|
|
tristate "Texas Instruments TWL4030 MADC Hwmon"
|
|
depends on TWL4030_MADC
|
|
help
|
|
If you say yes here you get hwmon support for triton
|
|
TWL4030-MADC.
|
|
|
|
This driver can also be built as a module. If so it will be called
|
|
twl4030-madc-hwmon.
|
|
|
|
config SENSORS_VIA_CPUTEMP
|
|
tristate "VIA CPU temperature sensor"
|
|
depends on X86
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside your CPU. Supported are all known variants of
|
|
the VIA C7 and Nano.
|
|
|
|
config SENSORS_VIA686A
|
|
tristate "VIA686A"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
Via 686A/B South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called via686a.
|
|
|
|
config SENSORS_VT1211
|
|
tristate "VIA VT1211"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here then you get support for hardware monitoring
|
|
features of the VIA VT1211 Super-I/O chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt1211.
|
|
|
|
config SENSORS_VT8231
|
|
tristate "VIA VT8231"
|
|
depends on PCI
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here then you get support for the integrated sensors
|
|
in the VIA VT8231 device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt8231.
|
|
|
|
config SENSORS_W83781D
|
|
tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W8378x series
|
|
of sensor chips: the W83781D, W83782D and W83783S, and the similar
|
|
Asus AS99127F.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83781d.
|
|
|
|
config SENSORS_W83791D
|
|
tristate "Winbond W83791D"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W83791D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83791d.
|
|
|
|
config SENSORS_W83792D
|
|
tristate "Winbond W83792D"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Winbond W83792D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83792d.
|
|
|
|
config SENSORS_W83793
|
|
tristate "Winbond W83793"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W83793
|
|
hardware monitoring chip, including support for the integrated
|
|
watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83793.
|
|
|
|
config SENSORS_W83795
|
|
tristate "Winbond/Nuvoton W83795G/ADG"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Winbond W83795G and
|
|
W83795ADG hardware monitoring chip, including manual fan speed
|
|
control.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83795.
|
|
|
|
config SENSORS_W83795_FANCTRL
|
|
boolean "Include automatic fan control support (DANGEROUS)"
|
|
depends on SENSORS_W83795 && EXPERIMENTAL
|
|
default n
|
|
help
|
|
If you say yes here, support for automatic fan speed control
|
|
will be included in the driver.
|
|
|
|
This part of the code wasn't carefully reviewed and tested yet,
|
|
so enabling this option is strongly discouraged on production
|
|
servers. Only developers and testers should enable it for the
|
|
time being.
|
|
|
|
Please also note that this option will create sysfs attribute
|
|
files which may change in the future, so you shouldn't rely
|
|
on them being stable.
|
|
|
|
config SENSORS_W83L785TS
|
|
tristate "Winbond W83L785TS-S"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Winbond W83L785TS-S
|
|
sensor chip, which is used on the Asus A7N8X, among other
|
|
motherboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83l785ts.
|
|
|
|
config SENSORS_W83L786NG
|
|
tristate "Winbond W83L786NG, W83L786NR"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Winbond W83L786NG
|
|
and W83L786NR sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83l786ng.
|
|
|
|
config SENSORS_W83627HF
|
|
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W836X7 series
|
|
of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
|
|
W83697HF.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627hf.
|
|
|
|
config SENSORS_W83627EHF
|
|
tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
|
|
|
|
This driver also supports the W83627EHG, which is the lead-free
|
|
version of the W83627EHF, and the W83627DHG, which is a similar
|
|
chip suited for specific Intel processors that use PECI such as
|
|
the Core 2 Duo. And also the W83627UHG, which is a stripped down
|
|
version of the W83627DHG (as far as hardware monitoring goes.)
|
|
|
|
This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
|
|
(also known as W83667HG-I), and NCT6776F.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627ehf.
|
|
|
|
config SENSORS_WM831X
|
|
tristate "WM831x PMICs"
|
|
depends on MFD_WM831X
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring functionality of the Wolfson Microelectronics
|
|
WM831x series of PMICs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called wm831x-hwmon.
|
|
|
|
config SENSORS_WM8350
|
|
tristate "Wolfson Microelectronics WM835x"
|
|
depends on MFD_WM8350
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring features of the WM835x series of PMICs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called wm8350-hwmon.
|
|
|
|
config SENSORS_ULTRA45
|
|
tristate "Sun Ultra45 PIC16F747"
|
|
depends on SPARC64
|
|
help
|
|
This driver provides support for the Ultra45 workstation environmental
|
|
sensors.
|
|
|
|
config SENSORS_APPLESMC
|
|
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
|
|
depends on INPUT && X86
|
|
select NEW_LEDS
|
|
select LEDS_CLASS
|
|
select INPUT_POLLDEV
|
|
default n
|
|
help
|
|
This driver provides support for the Apple System Management
|
|
Controller, which provides an accelerometer (Apple Sudden Motion
|
|
Sensor), light sensors, temperature sensors, keyboard backlight
|
|
control and fan control.
|
|
|
|
Only Intel-based Apple's computers are supported (MacBook Pro,
|
|
MacBook, MacMini).
|
|
|
|
Data from the different sensors, keyboard backlight control and fan
|
|
control are accessible via sysfs.
|
|
|
|
This driver also provides an absolute input class device, allowing
|
|
the laptop to act as a pinball machine-esque joystick.
|
|
|
|
Say Y here if you have an applicable laptop and want to experience
|
|
the awesome power of applesmc.
|
|
|
|
config SENSORS_MC13783_ADC
|
|
tristate "Freescale MC13783/MC13892 ADC"
|
|
depends on MFD_MC13XXX
|
|
help
|
|
Support for the A/D converter on MC13783 and MC13892 PMIC.
|
|
|
|
if ACPI
|
|
|
|
comment "ACPI drivers"
|
|
|
|
config SENSORS_ACPI_POWER
|
|
tristate "ACPI 4.0 power meter"
|
|
help
|
|
This driver exposes ACPI 4.0 power meters as hardware monitoring
|
|
devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
|
|
and a power meter.
|
|
|
|
To compile this driver as a module, choose M here:
|
|
the module will be called acpi_power_meter.
|
|
|
|
config SENSORS_ATK0110
|
|
tristate "ASUS ATK0110"
|
|
depends on X86 && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the ACPI hardware
|
|
monitoring interface found in many ASUS motherboards. This
|
|
driver will provide readings of fans, voltages and temperatures
|
|
through the system firmware.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asus_atk0110.
|
|
|
|
endif # ACPI
|
|
|
|
endif # HWMON
|