kernel-ark/arch/powerpc/kernel/cpu_setup_power7.S
Paul Mackerras 969391c58a powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits
This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to
indicate that we have a usable hypervisor mode, and another to indicate
that the processor conforms to PowerISA version 2.06.  We also add
another bit to indicate that the processor conforms to ISA version 2.01
and set that for PPC970 and derivatives.

Some PPC970 chips (specifically those in Apple machines) have a
hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode
is not useful in the sense that there is no way to run any code in
supervisor mode (HV=0 PR=0).  On these processors, the LPES0 and LPES1
bits in HID4 are always 0, and we use that as a way of detecting that
hypervisor mode is not useful.

Where we have a feature section in assembly code around code that
only applies on POWER7 in hypervisor mode, we use a construct like

END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)

The definition of END_FTR_SECTION_IFSET is such that the code will
be enabled (not overwritten with nops) only if all bits in the
provided mask are set.

Note that the CPU feature check in __tlbie() only needs to check the
ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called
if we are running bare-metal, i.e. in hypervisor mode.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-12 13:16:58 +03:00

96 lines
1.9 KiB
ArmAsm

/*
* This file contains low level CPU setup functions.
* Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
/* Entry: r3 = crap, r4 = ptr to cputable entry
*
* Note that we can be called twice for pseudo-PVRs
*/
_GLOBAL(__setup_cpu_power7)
mflr r11
bl __init_hvmode_206
mtlr r11
beqlr
li r0,0
mtspr SPRN_LPID,r0
bl __init_LPCR
bl __init_TLB
mtlr r11
blr
_GLOBAL(__restore_cpu_power7)
mflr r11
mfmsr r3
rldicl. r0,r3,4,63
beqlr
li r0,0
mtspr SPRN_LPID,r0
bl __init_LPCR
bl __init_TLB
mtlr r11
blr
__init_hvmode_206:
/* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */
mfmsr r3
rldicl. r0,r3,4,63
bnelr
ld r5,CPU_SPEC_FEATURES(r4)
LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE)
xor r5,r5,r6
std r5,CPU_SPEC_FEATURES(r4)
blr
__init_LPCR:
/* Setup a sane LPCR:
*
* LPES = 0b01 (HSRR0/1 used for 0x500)
* PECE = 0b111
* DPFD = 4
* HDICE = 0
* VC = 0b100 (VPM0=1, VPM1=0, ISL=0)
* VRMASD = 0b10000 (L=1, LP=00)
*
* Other bits untouched for now
*/
mfspr r3,SPRN_LPCR
li r5,1
rldimi r3,r5, LPCR_LPES_SH, 64-LPCR_LPES_SH-2
ori r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
li r5,4
rldimi r3,r5, LPCR_DPFD_SH, 64-LPCR_DPFD_SH-3
clrrdi r3,r3,1 /* clear HDICE */
li r5,4
rldimi r3,r5, LPCR_VC_SH, 0
li r5,0x10
rldimi r3,r5, LPCR_VRMASD_SH, 64-LPCR_VRMASD_SH-5
mtspr SPRN_LPCR,r3
isync
blr
__init_TLB:
/* Clear the TLB */
li r6,128
mtctr r6
li r7,0xc00 /* IS field = 0b11 */
ptesync
2: tlbiel r7
addi r7,r7,0x1000
bdnz 2b
ptesync
1: blr