Florin Malita 270c7a7215 [SERIAL] sa1100_start_tx spinlock recursion ... The serial core aquires the port spinlock before calling port->ops->start_tx(), so sa1100_start_tx() shouldn't try to lock it again. BUG: spinlock recursion on CPU#0, init/1 lock: c0205f20, .magic: dead4ead, .owner: init/1, .owner_cpu: 0 [<c0022cdc>] (dump_stack+0x0/0x14) [<c00dc338>] (spin_bug+0x0/0xbc) [<c00dc6b0>] (_raw_spin_lock+0x0/0x170) r8 = 00000007 r7 = C02FE0070 [<c018a2a8>] (_spin_lock_irqsave+0x0/0x24) r4 = C0205F20 [<c0112110>] (sa1100_start_tx+0x0/0x40) r4 = C038C000 [<c010ee38>] (__uart_start+0x0/0x5c) [<c010ee94>] (uart_start+0x0/0x3 [<c010f1d0>] (uart_write+0x0/0xdc) [<c00fee34>] (write_chan+0x0/0x370 Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>		2005-11-12 22:09:22 +00:00
..
cpm_uart
jsm
8250_accent.c
8250_acorn.c
8250_acpi.c
8250_au1x00.c	[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.	2005-11-06 09:07:03 +00:00
8250_boca.c
8250_early.c
8250_fourport.c
8250_gsc.c
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c
8250_pnp.c	[SERIAL] Claim Wacom tablet device on HP tc1100 tablet	2005-11-12 22:06:31 +00:00
8250.c	[SERIAL] don't disable xscale serial ports after autoconfig	2005-11-12 21:58:05 +00:00
8250.h	[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.	2005-11-06 09:07:03 +00:00
21285.c
68328serial.c
68328serial.h
68360serial.c
amba-pl010.c
amba-pl011.c
au1x00_uart.c
clps711x.c
crisv10.c	[PATCH] serial: fix-up schedule_timeout() usage	2005-11-07 07:53:59 -08:00
crisv10.h
dz.c	[SERIAL] dz: Use CKSEG1ADDR to setup mappings.	2005-11-12 22:00:27 +00:00
dz.h
icom.c
icom.h
imx.c	[DRIVER MODEL] Convert platform drivers to use struct platform_driver	2005-11-09 22:32:44 +00:00
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig	[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.	2005-11-06 09:07:03 +00:00
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile	[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.	2005-11-06 09:07:03 +00:00
mcfserial.c	[PATCH] m68knommu: add 5208 ColdFire UART support to ColdFire serial driver	2005-11-07 08:00:46 -08:00
mcfserial.h
mpc52xx_uart.c	[SERIAL] Fix mpc52xx_uart.c	2005-11-12 22:04:06 +00:00
mpsc.c	[DRIVER MODEL] Convert platform drivers to use struct platform_driver	2005-11-09 22:32:44 +00:00
mpsc.h
mux.c
pmac_zilog.c
pmac_zilog.h
pxa.c	[DRIVER MODEL] Convert platform drivers to use struct platform_driver	2005-11-09 22:32:44 +00:00
s3c2410.c	[DRIVER MODEL] Convert platform drivers to use struct platform_driver	2005-11-09 22:32:44 +00:00
sa1100.c	[SERIAL] sa1100_start_tx spinlock recursion	2005-11-12 22:09:22 +00:00
serial_core.c	[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.	2005-11-06 09:07:03 +00:00
serial_cs.c
serial_lh7a40x.c
serial_txx9.c
sh-sci.c
sh-sci.h
sn_console.c
suncore.c
suncore.h
sunsab.c
sunsab.h
sunsu.c	[SUNSU]: Do not mark sunsu_console_setup() __init	2005-11-07 14:10:21 -08:00
sunzilog.c
sunzilog.h
uart00.c
v850e_uart.c
vr41xx_siu.c	[DRIVER MODEL] Convert platform drivers to use struct platform_driver	2005-11-09 22:32:44 +00:00