kernel-ark/kernel/itimer.c
Thomas Gleixner 7d99b7d634 [PATCH] Validate and sanitze itimer timeval from userspace
According to the specification the timevals must be validated and an
errorcode -EINVAL returned in case the timevals are not in canonical form.
This check was never done in Linux.

The pre 2.6.16 code converted invalid timevals silently.  Negative timeouts
were converted by the timeval_to_jiffies conversion to the maximum timeout.

hrtimers and the ktime_t operations expect timevals in canonical form.
Otherwise random results might happen on 32 bits machines due to the
optimized ktime_add/sub operations.  Negative timeouts are treated as
already expired.  This might break applications which work on pre 2.6.16.

To prevent random behaviour and API breakage the timevals are checked and
invalid timevals sanitized in a simliar way as the pre 2.6.16 code did.

Invalid timevals are reported with a per boot limited number of kernel
messages so applications which use this misfeature can be corrected.

After a grace period of one year the sanitizing should be replaced by a
correct validation check.  This is also documented in
Documentation/feature-removal-schedule.txt

The validation and sanitizing is done inside do_setitimer so all callers
(sys_setitimer, compat_sys_setitimer, osf_setitimer) are catched.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:49 -08:00

353 lines
9.3 KiB
C

/*
* linux/kernel/itimer.c
*
* Copyright (C) 1992 Darren Senn
*/
/* These are all the functions necessary to implement itimers */
#include <linux/mm.h>
#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/syscalls.h>
#include <linux/time.h>
#include <linux/posix-timers.h>
#include <linux/hrtimer.h>
#include <asm/uaccess.h>
/**
* itimer_get_remtime - get remaining time for the timer
*
* @timer: the timer to read
*
* Returns the delta between the expiry time and now, which can be
* less than zero or 1usec for an pending expired timer
*/
static struct timeval itimer_get_remtime(struct hrtimer *timer)
{
ktime_t rem = hrtimer_get_remaining(timer);
/*
* Racy but safe: if the itimer expires after the above
* hrtimer_get_remtime() call but before this condition
* then we return 0 - which is correct.
*/
if (hrtimer_active(timer)) {
if (rem.tv64 <= 0)
rem.tv64 = NSEC_PER_USEC;
} else
rem.tv64 = 0;
return ktime_to_timeval(rem);
}
int do_getitimer(int which, struct itimerval *value)
{
struct task_struct *tsk = current;
cputime_t cinterval, cval;
switch (which) {
case ITIMER_REAL:
spin_lock_irq(&tsk->sighand->siglock);
value->it_value = itimer_get_remtime(&tsk->signal->real_timer);
value->it_interval =
ktime_to_timeval(tsk->signal->it_real_incr);
spin_unlock_irq(&tsk->sighand->siglock);
break;
case ITIMER_VIRTUAL:
read_lock(&tasklist_lock);
spin_lock_irq(&tsk->sighand->siglock);
cval = tsk->signal->it_virt_expires;
cinterval = tsk->signal->it_virt_incr;
if (!cputime_eq(cval, cputime_zero)) {
struct task_struct *t = tsk;
cputime_t utime = tsk->signal->utime;
do {
utime = cputime_add(utime, t->utime);
t = next_thread(t);
} while (t != tsk);
if (cputime_le(cval, utime)) { /* about to fire */
cval = jiffies_to_cputime(1);
} else {
cval = cputime_sub(cval, utime);
}
}
spin_unlock_irq(&tsk->sighand->siglock);
read_unlock(&tasklist_lock);
cputime_to_timeval(cval, &value->it_value);
cputime_to_timeval(cinterval, &value->it_interval);
break;
case ITIMER_PROF:
read_lock(&tasklist_lock);
spin_lock_irq(&tsk->sighand->siglock);
cval = tsk->signal->it_prof_expires;
cinterval = tsk->signal->it_prof_incr;
if (!cputime_eq(cval, cputime_zero)) {
struct task_struct *t = tsk;
cputime_t ptime = cputime_add(tsk->signal->utime,
tsk->signal->stime);
do {
ptime = cputime_add(ptime,
cputime_add(t->utime,
t->stime));
t = next_thread(t);
} while (t != tsk);
if (cputime_le(cval, ptime)) { /* about to fire */
cval = jiffies_to_cputime(1);
} else {
cval = cputime_sub(cval, ptime);
}
}
spin_unlock_irq(&tsk->sighand->siglock);
read_unlock(&tasklist_lock);
cputime_to_timeval(cval, &value->it_value);
cputime_to_timeval(cinterval, &value->it_interval);
break;
default:
return(-EINVAL);
}
return 0;
}
asmlinkage long sys_getitimer(int which, struct itimerval __user *value)
{
int error = -EFAULT;
struct itimerval get_buffer;
if (value) {
error = do_getitimer(which, &get_buffer);
if (!error &&
copy_to_user(value, &get_buffer, sizeof(get_buffer)))
error = -EFAULT;
}
return error;
}
/*
* The timer is automagically restarted, when interval != 0
*/
int it_real_fn(void *data)
{
struct task_struct *tsk = (struct task_struct *) data;
send_group_sig_info(SIGALRM, SEND_SIG_PRIV, tsk);
if (tsk->signal->it_real_incr.tv64 != 0) {
hrtimer_forward(&tsk->signal->real_timer,
tsk->signal->it_real_incr);
return HRTIMER_RESTART;
}
return HRTIMER_NORESTART;
}
/*
* We do not care about correctness. We just sanitize the values so
* the ktime_t operations which expect normalized values do not
* break. This converts negative values to long timeouts similar to
* the code in kernel versions < 2.6.16
*
* Print a limited number of warning messages when an invalid timeval
* is detected.
*/
static void fixup_timeval(struct timeval *tv, int interval)
{
static int warnlimit = 10;
unsigned long tmp;
if (warnlimit > 0) {
warnlimit--;
printk(KERN_WARNING
"setitimer: %s (pid = %d) provided "
"invalid timeval %s: tv_sec = %ld tv_usec = %ld\n",
current->comm, current->pid,
interval ? "it_interval" : "it_value",
tv->tv_sec, (long) tv->tv_usec);
}
tmp = tv->tv_usec;
if (tmp >= USEC_PER_SEC) {
tv->tv_usec = tmp % USEC_PER_SEC;
tv->tv_sec += tmp / USEC_PER_SEC;
}
tmp = tv->tv_sec;
if (tmp > LONG_MAX)
tv->tv_sec = LONG_MAX;
}
/*
* Returns true if the timeval is in canonical form
*/
#define timeval_valid(t) \
(((t)->tv_sec >= 0) && (((unsigned long) (t)->tv_usec) < USEC_PER_SEC))
/*
* Check for invalid timevals, sanitize them and print a limited
* number of warnings.
*/
static void check_itimerval(struct itimerval *value) {
if (unlikely(!timeval_valid(&value->it_value)))
fixup_timeval(&value->it_value, 0);
if (unlikely(!timeval_valid(&value->it_interval)))
fixup_timeval(&value->it_interval, 1);
}
int do_setitimer(int which, struct itimerval *value, struct itimerval *ovalue)
{
struct task_struct *tsk = current;
struct hrtimer *timer;
ktime_t expires;
cputime_t cval, cinterval, nval, ninterval;
/*
* Validate the timevals in value.
*
* Note: Although the spec requires that invalid values shall
* return -EINVAL, we just fixup the value and print a limited
* number of warnings in order not to break users of this
* historical misfeature.
*
* Scheduled for replacement in March 2007
*/
check_itimerval(value);
switch (which) {
case ITIMER_REAL:
again:
spin_lock_irq(&tsk->sighand->siglock);
timer = &tsk->signal->real_timer;
if (ovalue) {
ovalue->it_value = itimer_get_remtime(timer);
ovalue->it_interval
= ktime_to_timeval(tsk->signal->it_real_incr);
}
/* We are sharing ->siglock with it_real_fn() */
if (hrtimer_try_to_cancel(timer) < 0) {
spin_unlock_irq(&tsk->sighand->siglock);
goto again;
}
tsk->signal->it_real_incr =
timeval_to_ktime(value->it_interval);
expires = timeval_to_ktime(value->it_value);
if (expires.tv64 != 0)
hrtimer_start(timer, expires, HRTIMER_REL);
spin_unlock_irq(&tsk->sighand->siglock);
break;
case ITIMER_VIRTUAL:
nval = timeval_to_cputime(&value->it_value);
ninterval = timeval_to_cputime(&value->it_interval);
read_lock(&tasklist_lock);
spin_lock_irq(&tsk->sighand->siglock);
cval = tsk->signal->it_virt_expires;
cinterval = tsk->signal->it_virt_incr;
if (!cputime_eq(cval, cputime_zero) ||
!cputime_eq(nval, cputime_zero)) {
if (cputime_gt(nval, cputime_zero))
nval = cputime_add(nval,
jiffies_to_cputime(1));
set_process_cpu_timer(tsk, CPUCLOCK_VIRT,
&nval, &cval);
}
tsk->signal->it_virt_expires = nval;
tsk->signal->it_virt_incr = ninterval;
spin_unlock_irq(&tsk->sighand->siglock);
read_unlock(&tasklist_lock);
if (ovalue) {
cputime_to_timeval(cval, &ovalue->it_value);
cputime_to_timeval(cinterval, &ovalue->it_interval);
}
break;
case ITIMER_PROF:
nval = timeval_to_cputime(&value->it_value);
ninterval = timeval_to_cputime(&value->it_interval);
read_lock(&tasklist_lock);
spin_lock_irq(&tsk->sighand->siglock);
cval = tsk->signal->it_prof_expires;
cinterval = tsk->signal->it_prof_incr;
if (!cputime_eq(cval, cputime_zero) ||
!cputime_eq(nval, cputime_zero)) {
if (cputime_gt(nval, cputime_zero))
nval = cputime_add(nval,
jiffies_to_cputime(1));
set_process_cpu_timer(tsk, CPUCLOCK_PROF,
&nval, &cval);
}
tsk->signal->it_prof_expires = nval;
tsk->signal->it_prof_incr = ninterval;
spin_unlock_irq(&tsk->sighand->siglock);
read_unlock(&tasklist_lock);
if (ovalue) {
cputime_to_timeval(cval, &ovalue->it_value);
cputime_to_timeval(cinterval, &ovalue->it_interval);
}
break;
default:
return -EINVAL;
}
return 0;
}
/**
* alarm_setitimer - set alarm in seconds
*
* @seconds: number of seconds until alarm
* 0 disables the alarm
*
* Returns the remaining time in seconds of a pending timer or 0 when
* the timer is not active.
*
* On 32 bit machines the seconds value is limited to (INT_MAX/2) to avoid
* negative timeval settings which would cause immediate expiry.
*/
unsigned int alarm_setitimer(unsigned int seconds)
{
struct itimerval it_new, it_old;
#if BITS_PER_LONG < 64
if (seconds > INT_MAX)
seconds = INT_MAX;
#endif
it_new.it_value.tv_sec = seconds;
it_new.it_value.tv_usec = 0;
it_new.it_interval.tv_sec = it_new.it_interval.tv_usec = 0;
do_setitimer(ITIMER_REAL, &it_new, &it_old);
/*
* We can't return 0 if we have an alarm pending ... And we'd
* better return too much than too little anyway
*/
if ((!it_old.it_value.tv_sec && it_old.it_value.tv_usec) ||
it_old.it_value.tv_usec >= 500000)
it_old.it_value.tv_sec++;
return it_old.it_value.tv_sec;
}
asmlinkage long sys_setitimer(int which,
struct itimerval __user *value,
struct itimerval __user *ovalue)
{
struct itimerval set_buffer, get_buffer;
int error;
if (value) {
if(copy_from_user(&set_buffer, value, sizeof(set_buffer)))
return -EFAULT;
} else
memset((char *) &set_buffer, 0, sizeof(set_buffer));
error = do_setitimer(which, &set_buffer, ovalue ? &get_buffer : NULL);
if (error || !ovalue)
return error;
if (copy_to_user(ovalue, &get_buffer, sizeof(get_buffer)))
return -EFAULT;
return 0;
}