kernel-ark/arch/tile/kernel/relocate_kernel_64.S
Chris Metcalf d7c9661115 tile: remove support for TILE64
This chip is no longer being actively developed for (it was superceded
by the TILEPro64 in 2008), and in any case the existing compiler and
toolchain in the community do not support it.  It's unlikely that the
kernel works with TILE64 at this point as the configuration has not been
tested in years.  The support is also awkward as it requires maintaining
a significant number of ifdefs.  So, just remove it altogether.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:29 -04:00

264 lines
5.8 KiB
ArmAsm

/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*
* copy new kernel into place and then call hv_reexec
*
*/
#include <linux/linkage.h>
#include <arch/chip.h>
#include <asm/page.h>
#include <hv/hypervisor.h>
#undef RELOCATE_NEW_KERNEL_VERBOSE
STD_ENTRY(relocate_new_kernel)
move r30, r0 /* page list */
move r31, r1 /* address of page we are on */
move r32, r2 /* start address of new kernel */
shrui r1, r1, PAGE_SHIFT
addi r1, r1, 1
shli sp, r1, PAGE_SHIFT
addi sp, sp, -8
/* we now have a stack (whether we need one or not) */
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r40, hw2_last(hv_console_putc)
shl16insli r40, r40, hw1(hv_console_putc)
shl16insli r40, r40, hw0(hv_console_putc)
moveli r0, 'r'
jalr r40
moveli r0, '_'
jalr r40
moveli r0, 'n'
jalr r40
moveli r0, '_'
jalr r40
moveli r0, 'k'
jalr r40
moveli r0, '\n'
jalr r40
#endif
/*
* Throughout this code r30 is pointer to the element of page
* list we are working on.
*
* Normally we get to the next element of the page list by
* incrementing r30 by eight. The exception is if the element
* on the page list is an IND_INDIRECTION in which case we use
* the element with the low bits masked off as the new value
* of r30.
*
* To get this started, we need the value passed to us (which
* will always be an IND_INDIRECTION) in memory somewhere with
* r30 pointing at it. To do that, we push the value passed
* to us on the stack and make r30 point to it.
*/
st sp, r30
move r30, sp
addi sp, sp, -16
/*
* On TILE-GX, we need to flush all tiles' caches, since we may
* have been doing hash-for-home caching there. Note that we
* must do this _after_ we're completely done modifying any memory
* other than our output buffer (which we know is locally cached).
* We want the caches to be fully clean when we do the reexec,
* because the hypervisor is going to do this flush again at that
* point, and we don't want that second flush to overwrite any memory.
*/
{
move r0, zero /* cache_pa */
moveli r1, hw2_last(HV_FLUSH_EVICT_L2)
}
{
shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2)
movei r2, -1 /* cache_cpumask; -1 means all client tiles */
}
{
shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2) /* cache_control */
move r3, zero /* tlb_va */
}
{
move r4, zero /* tlb_length */
move r5, zero /* tlb_pgsize */
}
{
move r6, zero /* tlb_cpumask */
move r7, zero /* asids */
}
{
moveli r20, hw2_last(hv_flush_remote)
move r8, zero /* asidcount */
}
shl16insli r20, r20, hw1(hv_flush_remote)
shl16insli r20, r20, hw0(hv_flush_remote)
jalr r20
/* r33 is destination pointer, default to zero */
moveli r33, 0
.Lloop: ld r10, r30
andi r9, r10, 0xf /* low 4 bits tell us what type it is */
xor r10, r10, r9 /* r10 is now value with low 4 bits stripped */
cmpeqi r0, r9, 0x1 /* IND_DESTINATION */
beqzt r0, .Ltry2
move r33, r10
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 'd'
jalr r40
#endif
addi r30, r30, 8
j .Lloop
.Ltry2:
cmpeqi r0, r9, 0x2 /* IND_INDIRECTION */
beqzt r0, .Ltry4
move r30, r10
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 'i'
jalr r40
#endif
j .Lloop
.Ltry4:
cmpeqi r0, r9, 0x4 /* IND_DONE */
beqzt r0, .Ltry8
mf
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 'D'
jalr r40
moveli r0, '\n'
jalr r40
#endif
move r0, r32
moveli r41, hw2_last(hv_reexec)
shl16insli r41, r41, hw1(hv_reexec)
shl16insli r41, r41, hw0(hv_reexec)
jalr r41
/* we should not get here */
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, '?'
jalr r40
moveli r0, '\n'
jalr r40
#endif
j .Lhalt
.Ltry8: cmpeqi r0, r9, 0x8 /* IND_SOURCE */
beqz r0, .Lerr /* unknown type */
/* copy page at r10 to page at r33 */
move r11, r33
moveli r0, hw2_last(PAGE_SIZE)
shl16insli r0, r0, hw1(PAGE_SIZE)
shl16insli r0, r0, hw0(PAGE_SIZE)
add r33, r33, r0
/* copy word at r10 to word at r11 until r11 equals r33 */
/* We know page size must be multiple of 8, so we can unroll
* 8 times safely without any edge case checking.
*
* Issue a flush of the destination every 8 words to avoid
* incoherence when starting the new kernel. (Now this is
* just good paranoia because the hv_reexec call will also
* take care of this.)
*/
1:
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0; addi r11, r11, 8 }
{ ld r0, r10; addi r10, r10, 8 }
{ st r11, r0 }
{ flush r11 ; addi r11, r11, 8 }
cmpeq r0, r33, r11
beqzt r0, 1b
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 's'
jalr r40
#endif
addi r30, r30, 8
j .Lloop
.Lerr:
#ifdef RELOCATE_NEW_KERNEL_VERBOSE
moveli r0, 'e'
jalr r40
moveli r0, 'r'
jalr r40
moveli r0, 'r'
jalr r40
moveli r0, '\n'
jalr r40
#endif
.Lhalt:
moveli r41, hw2_last(hv_halt)
shl16insli r41, r41, hw1(hv_halt)
shl16insli r41, r41, hw0(hv_halt)
jalr r41
STD_ENDPROC(relocate_new_kernel)
.section .rodata,"a"
.globl relocate_new_kernel_size
relocate_new_kernel_size:
.long .Lend_relocate_new_kernel - relocate_new_kernel