79de2ee469
Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during all write raw operations. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
1701 lines
44 KiB
C
1701 lines
44 KiB
C
/*
|
|
* mma8452.c - Support for following Freescale / NXP 3-axis accelerometers:
|
|
*
|
|
* device name digital output 7-bit I2C slave address (pin selectable)
|
|
* ---------------------------------------------------------------------
|
|
* MMA8451Q 14 bit 0x1c / 0x1d
|
|
* MMA8452Q 12 bit 0x1c / 0x1d
|
|
* MMA8453Q 10 bit 0x1c / 0x1d
|
|
* MMA8652FC 12 bit 0x1d
|
|
* MMA8653FC 10 bit 0x1d
|
|
* FXLS8471Q 14 bit 0x1e / 0x1d / 0x1c / 0x1f
|
|
*
|
|
* Copyright 2015 Martin Kepplinger <martink@posteo.de>
|
|
* Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
|
|
*
|
|
* This file is subject to the terms and conditions of version 2 of
|
|
* the GNU General Public License. See the file COPYING in the main
|
|
* directory of this archive for more details.
|
|
*
|
|
* TODO: orientation events
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#define MMA8452_STATUS 0x00
|
|
#define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
|
|
#define MMA8452_OUT_X 0x01 /* MSB first */
|
|
#define MMA8452_OUT_Y 0x03
|
|
#define MMA8452_OUT_Z 0x05
|
|
#define MMA8452_INT_SRC 0x0c
|
|
#define MMA8452_WHO_AM_I 0x0d
|
|
#define MMA8452_DATA_CFG 0x0e
|
|
#define MMA8452_DATA_CFG_FS_MASK GENMASK(1, 0)
|
|
#define MMA8452_DATA_CFG_FS_2G 0
|
|
#define MMA8452_DATA_CFG_FS_4G 1
|
|
#define MMA8452_DATA_CFG_FS_8G 2
|
|
#define MMA8452_DATA_CFG_HPF_MASK BIT(4)
|
|
#define MMA8452_HP_FILTER_CUTOFF 0x0f
|
|
#define MMA8452_HP_FILTER_CUTOFF_SEL_MASK GENMASK(1, 0)
|
|
#define MMA8452_FF_MT_CFG 0x15
|
|
#define MMA8452_FF_MT_CFG_OAE BIT(6)
|
|
#define MMA8452_FF_MT_CFG_ELE BIT(7)
|
|
#define MMA8452_FF_MT_SRC 0x16
|
|
#define MMA8452_FF_MT_SRC_XHE BIT(1)
|
|
#define MMA8452_FF_MT_SRC_YHE BIT(3)
|
|
#define MMA8452_FF_MT_SRC_ZHE BIT(5)
|
|
#define MMA8452_FF_MT_THS 0x17
|
|
#define MMA8452_FF_MT_THS_MASK 0x7f
|
|
#define MMA8452_FF_MT_COUNT 0x18
|
|
#define MMA8452_TRANSIENT_CFG 0x1d
|
|
#define MMA8452_TRANSIENT_CFG_HPF_BYP BIT(0)
|
|
#define MMA8452_TRANSIENT_CFG_ELE BIT(4)
|
|
#define MMA8452_TRANSIENT_SRC 0x1e
|
|
#define MMA8452_TRANSIENT_SRC_XTRANSE BIT(1)
|
|
#define MMA8452_TRANSIENT_SRC_YTRANSE BIT(3)
|
|
#define MMA8452_TRANSIENT_SRC_ZTRANSE BIT(5)
|
|
#define MMA8452_TRANSIENT_THS 0x1f
|
|
#define MMA8452_TRANSIENT_THS_MASK GENMASK(6, 0)
|
|
#define MMA8452_TRANSIENT_COUNT 0x20
|
|
#define MMA8452_CTRL_REG1 0x2a
|
|
#define MMA8452_CTRL_ACTIVE BIT(0)
|
|
#define MMA8452_CTRL_DR_MASK GENMASK(5, 3)
|
|
#define MMA8452_CTRL_DR_SHIFT 3
|
|
#define MMA8452_CTRL_DR_DEFAULT 0x4 /* 50 Hz sample frequency */
|
|
#define MMA8452_CTRL_REG2 0x2b
|
|
#define MMA8452_CTRL_REG2_RST BIT(6)
|
|
#define MMA8452_CTRL_REG2_MODS_SHIFT 3
|
|
#define MMA8452_CTRL_REG2_MODS_MASK 0x1b
|
|
#define MMA8452_CTRL_REG4 0x2d
|
|
#define MMA8452_CTRL_REG5 0x2e
|
|
#define MMA8452_OFF_X 0x2f
|
|
#define MMA8452_OFF_Y 0x30
|
|
#define MMA8452_OFF_Z 0x31
|
|
|
|
#define MMA8452_MAX_REG 0x31
|
|
|
|
#define MMA8452_INT_DRDY BIT(0)
|
|
#define MMA8452_INT_FF_MT BIT(2)
|
|
#define MMA8452_INT_TRANS BIT(5)
|
|
|
|
#define MMA8451_DEVICE_ID 0x1a
|
|
#define MMA8452_DEVICE_ID 0x2a
|
|
#define MMA8453_DEVICE_ID 0x3a
|
|
#define MMA8652_DEVICE_ID 0x4a
|
|
#define MMA8653_DEVICE_ID 0x5a
|
|
#define FXLS8471_DEVICE_ID 0x6a
|
|
|
|
#define MMA8452_AUTO_SUSPEND_DELAY_MS 2000
|
|
|
|
struct mma8452_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
u8 ctrl_reg1;
|
|
u8 data_cfg;
|
|
const struct mma_chip_info *chip_info;
|
|
};
|
|
|
|
/**
|
|
* struct mma_chip_info - chip specific data
|
|
* @chip_id: WHO_AM_I register's value
|
|
* @channels: struct iio_chan_spec matching the device's
|
|
* capabilities
|
|
* @num_channels: number of channels
|
|
* @mma_scales: scale factors for converting register values
|
|
* to m/s^2; 3 modes: 2g, 4g, 8g; 2 integers
|
|
* per mode: m/s^2 and micro m/s^2
|
|
* @ev_cfg: event config register address
|
|
* @ev_cfg_ele: latch bit in event config register
|
|
* @ev_cfg_chan_shift: number of the bit to enable events in X
|
|
* direction; in event config register
|
|
* @ev_src: event source register address
|
|
* @ev_src_xe: bit in event source register that indicates
|
|
* an event in X direction
|
|
* @ev_src_ye: bit in event source register that indicates
|
|
* an event in Y direction
|
|
* @ev_src_ze: bit in event source register that indicates
|
|
* an event in Z direction
|
|
* @ev_ths: event threshold register address
|
|
* @ev_ths_mask: mask for the threshold value
|
|
* @ev_count: event count (period) register address
|
|
*
|
|
* Since not all chips supported by the driver support comparing high pass
|
|
* filtered data for events (interrupts), different interrupt sources are
|
|
* used for different chips and the relevant registers are included here.
|
|
*/
|
|
struct mma_chip_info {
|
|
u8 chip_id;
|
|
const struct iio_chan_spec *channels;
|
|
int num_channels;
|
|
const int mma_scales[3][2];
|
|
u8 ev_cfg;
|
|
u8 ev_cfg_ele;
|
|
u8 ev_cfg_chan_shift;
|
|
u8 ev_src;
|
|
u8 ev_src_xe;
|
|
u8 ev_src_ye;
|
|
u8 ev_src_ze;
|
|
u8 ev_ths;
|
|
u8 ev_ths_mask;
|
|
u8 ev_count;
|
|
};
|
|
|
|
enum {
|
|
idx_x,
|
|
idx_y,
|
|
idx_z,
|
|
idx_ts,
|
|
};
|
|
|
|
static int mma8452_drdy(struct mma8452_data *data)
|
|
{
|
|
int tries = 150;
|
|
|
|
while (tries-- > 0) {
|
|
int ret = i2c_smbus_read_byte_data(data->client,
|
|
MMA8452_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
if ((ret & MMA8452_STATUS_DRDY) == MMA8452_STATUS_DRDY)
|
|
return 0;
|
|
|
|
msleep(20);
|
|
}
|
|
|
|
dev_err(&data->client->dev, "data not ready\n");
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on)
|
|
{
|
|
#ifdef CONFIG_PM
|
|
int ret;
|
|
|
|
if (on) {
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
} else {
|
|
pm_runtime_mark_last_busy(&client->dev);
|
|
ret = pm_runtime_put_autosuspend(&client->dev);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"failed to change power state to %d\n", on);
|
|
if (on)
|
|
pm_runtime_put_noidle(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mma8452_read(struct mma8452_data *data, __be16 buf[3])
|
|
{
|
|
int ret = mma8452_drdy(data);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = mma8452_set_runtime_pm_state(data->client, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_i2c_block_data(data->client, MMA8452_OUT_X,
|
|
3 * sizeof(__be16), (u8 *)buf);
|
|
|
|
ret = mma8452_set_runtime_pm_state(data->client, false);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t mma8452_show_int_plus_micros(char *buf, const int (*vals)[2],
|
|
int n)
|
|
{
|
|
size_t len = 0;
|
|
|
|
while (n-- > 0)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06d ",
|
|
vals[n][0], vals[n][1]);
|
|
|
|
/* replace trailing space by newline */
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static int mma8452_get_int_plus_micros_index(const int (*vals)[2], int n,
|
|
int val, int val2)
|
|
{
|
|
while (n-- > 0)
|
|
if (val == vals[n][0] && val2 == vals[n][1])
|
|
return n;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mma8452_get_odr_index(struct mma8452_data *data)
|
|
{
|
|
return (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >>
|
|
MMA8452_CTRL_DR_SHIFT;
|
|
}
|
|
|
|
static const int mma8452_samp_freq[8][2] = {
|
|
{800, 0}, {400, 0}, {200, 0}, {100, 0}, {50, 0}, {12, 500000},
|
|
{6, 250000}, {1, 560000}
|
|
};
|
|
|
|
/* Datasheet table: step time "Relationship with the ODR" (sample frequency) */
|
|
static const int mma8452_transient_time_step_us[4][8] = {
|
|
{ 1250, 2500, 5000, 10000, 20000, 20000, 20000, 20000 }, /* normal */
|
|
{ 1250, 2500, 5000, 10000, 20000, 80000, 80000, 80000 }, /* l p l n */
|
|
{ 1250, 2500, 2500, 2500, 2500, 2500, 2500, 2500 }, /* high res*/
|
|
{ 1250, 2500, 5000, 10000, 20000, 80000, 160000, 160000 } /* l p */
|
|
};
|
|
|
|
/* Datasheet table "High-Pass Filter Cutoff Options" */
|
|
static const int mma8452_hp_filter_cutoff[4][8][4][2] = {
|
|
{ /* normal */
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 800 Hz sample */
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 400 Hz sample */
|
|
{ {8, 0}, {4, 0}, {2, 0}, {1, 0} }, /* 200 Hz sample */
|
|
{ {4, 0}, {2, 0}, {1, 0}, {0, 500000} }, /* 100 Hz sample */
|
|
{ {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 50 Hz sample */
|
|
{ {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 12.5 Hz sample */
|
|
{ {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 6.25 Hz sample */
|
|
{ {2, 0}, {1, 0}, {0, 500000}, {0, 250000} } /* 1.56 Hz sample */
|
|
},
|
|
{ /* low noise low power */
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {8, 0}, {4, 0}, {2, 0}, {1, 0} },
|
|
{ {4, 0}, {2, 0}, {1, 0}, {0, 500000} },
|
|
{ {2, 0}, {1, 0}, {0, 500000}, {0, 250000} },
|
|
{ {0, 500000}, {0, 250000}, {0, 125000}, {0, 063000} },
|
|
{ {0, 500000}, {0, 250000}, {0, 125000}, {0, 063000} },
|
|
{ {0, 500000}, {0, 250000}, {0, 125000}, {0, 063000} }
|
|
},
|
|
{ /* high resolution */
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} }
|
|
},
|
|
{ /* low power */
|
|
{ {16, 0}, {8, 0}, {4, 0}, {2, 0} },
|
|
{ {8, 0}, {4, 0}, {2, 0}, {1, 0} },
|
|
{ {4, 0}, {2, 0}, {1, 0}, {0, 500000} },
|
|
{ {2, 0}, {1, 0}, {0, 500000}, {0, 250000} },
|
|
{ {1, 0}, {0, 500000}, {0, 250000}, {0, 125000} },
|
|
{ {0, 250000}, {0, 125000}, {0, 063000}, {0, 031000} },
|
|
{ {0, 250000}, {0, 125000}, {0, 063000}, {0, 031000} },
|
|
{ {0, 250000}, {0, 125000}, {0, 063000}, {0, 031000} }
|
|
}
|
|
};
|
|
|
|
/* Datasheet table "MODS Oversampling modes averaging values at each ODR" */
|
|
static const u16 mma8452_os_ratio[4][8] = {
|
|
/* 800 Hz, 400 Hz, ... , 1.56 Hz */
|
|
{ 2, 4, 4, 4, 4, 16, 32, 128 }, /* normal */
|
|
{ 2, 4, 4, 4, 4, 4, 8, 32 }, /* low power low noise */
|
|
{ 2, 4, 8, 16, 32, 128, 256, 1024 }, /* high resolution */
|
|
{ 2, 2, 2, 2, 2, 2, 4, 16 } /* low power */
|
|
};
|
|
|
|
static int mma8452_get_power_mode(struct mma8452_data *data)
|
|
{
|
|
int reg;
|
|
|
|
reg = i2c_smbus_read_byte_data(data->client,
|
|
MMA8452_CTRL_REG2);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
return ((reg & MMA8452_CTRL_REG2_MODS_MASK) >>
|
|
MMA8452_CTRL_REG2_MODS_SHIFT);
|
|
}
|
|
|
|
static ssize_t mma8452_show_samp_freq_avail(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return mma8452_show_int_plus_micros(buf, mma8452_samp_freq,
|
|
ARRAY_SIZE(mma8452_samp_freq));
|
|
}
|
|
|
|
static ssize_t mma8452_show_scale_avail(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct mma8452_data *data = iio_priv(i2c_get_clientdata(
|
|
to_i2c_client(dev)));
|
|
|
|
return mma8452_show_int_plus_micros(buf, data->chip_info->mma_scales,
|
|
ARRAY_SIZE(data->chip_info->mma_scales));
|
|
}
|
|
|
|
static ssize_t mma8452_show_hp_cutoff_avail(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
int i, j;
|
|
|
|
i = mma8452_get_odr_index(data);
|
|
j = mma8452_get_power_mode(data);
|
|
if (j < 0)
|
|
return j;
|
|
|
|
return mma8452_show_int_plus_micros(buf, mma8452_hp_filter_cutoff[j][i],
|
|
ARRAY_SIZE(mma8452_hp_filter_cutoff[0][0]));
|
|
}
|
|
|
|
static ssize_t mma8452_show_os_ratio_avail(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
int i = mma8452_get_odr_index(data);
|
|
int j;
|
|
u16 val = 0;
|
|
size_t len = 0;
|
|
|
|
for (j = 0; j < ARRAY_SIZE(mma8452_os_ratio); j++) {
|
|
if (val == mma8452_os_ratio[j][i])
|
|
continue;
|
|
|
|
val = mma8452_os_ratio[j][i];
|
|
|
|
len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", val);
|
|
}
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mma8452_show_samp_freq_avail);
|
|
static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
|
|
mma8452_show_scale_avail, NULL, 0);
|
|
static IIO_DEVICE_ATTR(in_accel_filter_high_pass_3db_frequency_available,
|
|
S_IRUGO, mma8452_show_hp_cutoff_avail, NULL, 0);
|
|
static IIO_DEVICE_ATTR(in_accel_oversampling_ratio_available, S_IRUGO,
|
|
mma8452_show_os_ratio_avail, NULL, 0);
|
|
|
|
static int mma8452_get_samp_freq_index(struct mma8452_data *data,
|
|
int val, int val2)
|
|
{
|
|
return mma8452_get_int_plus_micros_index(mma8452_samp_freq,
|
|
ARRAY_SIZE(mma8452_samp_freq),
|
|
val, val2);
|
|
}
|
|
|
|
static int mma8452_get_scale_index(struct mma8452_data *data, int val, int val2)
|
|
{
|
|
return mma8452_get_int_plus_micros_index(data->chip_info->mma_scales,
|
|
ARRAY_SIZE(data->chip_info->mma_scales), val, val2);
|
|
}
|
|
|
|
static int mma8452_get_hp_filter_index(struct mma8452_data *data,
|
|
int val, int val2)
|
|
{
|
|
int i, j;
|
|
|
|
i = mma8452_get_odr_index(data);
|
|
j = mma8452_get_power_mode(data);
|
|
if (j < 0)
|
|
return j;
|
|
|
|
return mma8452_get_int_plus_micros_index(mma8452_hp_filter_cutoff[j][i],
|
|
ARRAY_SIZE(mma8452_hp_filter_cutoff[0][0]), val, val2);
|
|
}
|
|
|
|
static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz)
|
|
{
|
|
int j, i, ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, MMA8452_HP_FILTER_CUTOFF);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
i = mma8452_get_odr_index(data);
|
|
j = mma8452_get_power_mode(data);
|
|
if (j < 0)
|
|
return j;
|
|
|
|
ret &= MMA8452_HP_FILTER_CUTOFF_SEL_MASK;
|
|
*hz = mma8452_hp_filter_cutoff[j][i][ret][0];
|
|
*uHz = mma8452_hp_filter_cutoff[j][i][ret][1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mma8452_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
__be16 buffer[3];
|
|
int i, ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = mma8452_read(data, buffer);
|
|
mutex_unlock(&data->lock);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = sign_extend32(be16_to_cpu(
|
|
buffer[chan->scan_index]) >> chan->scan_type.shift,
|
|
chan->scan_type.realbits - 1);
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
i = data->data_cfg & MMA8452_DATA_CFG_FS_MASK;
|
|
*val = data->chip_info->mma_scales[i][0];
|
|
*val2 = data->chip_info->mma_scales[i][1];
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
i = mma8452_get_odr_index(data);
|
|
*val = mma8452_samp_freq[i][0];
|
|
*val2 = mma8452_samp_freq[i][1];
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
MMA8452_OFF_X +
|
|
chan->scan_index);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = sign_extend32(ret, 7);
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
|
|
if (data->data_cfg & MMA8452_DATA_CFG_HPF_MASK) {
|
|
ret = mma8452_read_hp_filter(data, val, val2);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
*val = 0;
|
|
*val2 = 0;
|
|
}
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
|
|
ret = mma8452_get_power_mode(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
i = mma8452_get_odr_index(data);
|
|
|
|
*val = mma8452_os_ratio[ret][i];
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mma8452_standby(struct mma8452_data *data)
|
|
{
|
|
return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
|
|
data->ctrl_reg1 & ~MMA8452_CTRL_ACTIVE);
|
|
}
|
|
|
|
static int mma8452_active(struct mma8452_data *data)
|
|
{
|
|
return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
|
|
data->ctrl_reg1);
|
|
}
|
|
|
|
/* returns >0 if active, 0 if in standby and <0 on error */
|
|
static int mma8452_is_active(struct mma8452_data *data)
|
|
{
|
|
int reg;
|
|
|
|
reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG1);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
return reg & MMA8452_CTRL_ACTIVE;
|
|
}
|
|
|
|
static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val)
|
|
{
|
|
int ret;
|
|
int is_active;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
is_active = mma8452_is_active(data);
|
|
if (is_active < 0) {
|
|
ret = is_active;
|
|
goto fail;
|
|
}
|
|
|
|
/* config can only be changed when in standby */
|
|
if (is_active > 0) {
|
|
ret = mma8452_standby(data);
|
|
if (ret < 0)
|
|
goto fail;
|
|
}
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, reg, val);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
if (is_active > 0) {
|
|
ret = mma8452_active(data);
|
|
if (ret < 0)
|
|
goto fail;
|
|
}
|
|
|
|
ret = 0;
|
|
fail:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mma8452_set_power_mode(struct mma8452_data *data, u8 mode)
|
|
{
|
|
int reg;
|
|
|
|
reg = i2c_smbus_read_byte_data(data->client,
|
|
MMA8452_CTRL_REG2);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= ~MMA8452_CTRL_REG2_MODS_MASK;
|
|
reg |= mode << MMA8452_CTRL_REG2_MODS_SHIFT;
|
|
|
|
return mma8452_change_config(data, MMA8452_CTRL_REG2, reg);
|
|
}
|
|
|
|
/* returns >0 if in freefall mode, 0 if not or <0 if an error occurred */
|
|
static int mma8452_freefall_mode_enabled(struct mma8452_data *data)
|
|
{
|
|
int val;
|
|
const struct mma_chip_info *chip = data->chip_info;
|
|
|
|
val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
return !(val & MMA8452_FF_MT_CFG_OAE);
|
|
}
|
|
|
|
static int mma8452_set_freefall_mode(struct mma8452_data *data, bool state)
|
|
{
|
|
int val;
|
|
const struct mma_chip_info *chip = data->chip_info;
|
|
|
|
if ((state && mma8452_freefall_mode_enabled(data)) ||
|
|
(!state && !(mma8452_freefall_mode_enabled(data))))
|
|
return 0;
|
|
|
|
val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (state) {
|
|
val |= BIT(idx_x + chip->ev_cfg_chan_shift);
|
|
val |= BIT(idx_y + chip->ev_cfg_chan_shift);
|
|
val |= BIT(idx_z + chip->ev_cfg_chan_shift);
|
|
val &= ~MMA8452_FF_MT_CFG_OAE;
|
|
} else {
|
|
val &= ~BIT(idx_x + chip->ev_cfg_chan_shift);
|
|
val &= ~BIT(idx_y + chip->ev_cfg_chan_shift);
|
|
val &= ~BIT(idx_z + chip->ev_cfg_chan_shift);
|
|
val |= MMA8452_FF_MT_CFG_OAE;
|
|
}
|
|
|
|
return mma8452_change_config(data, chip->ev_cfg, val);
|
|
}
|
|
|
|
static int mma8452_set_hp_filter_frequency(struct mma8452_data *data,
|
|
int val, int val2)
|
|
{
|
|
int i, reg;
|
|
|
|
i = mma8452_get_hp_filter_index(data, val, val2);
|
|
if (i < 0)
|
|
return i;
|
|
|
|
reg = i2c_smbus_read_byte_data(data->client,
|
|
MMA8452_HP_FILTER_CUTOFF);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= ~MMA8452_HP_FILTER_CUTOFF_SEL_MASK;
|
|
reg |= i;
|
|
|
|
return mma8452_change_config(data, MMA8452_HP_FILTER_CUTOFF, reg);
|
|
}
|
|
|
|
static int mma8452_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
int i, ret;
|
|
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
i = mma8452_get_samp_freq_index(data, val, val2);
|
|
if (i < 0) {
|
|
ret = i;
|
|
break;
|
|
}
|
|
data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
|
|
data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
|
|
|
|
ret = mma8452_change_config(data, MMA8452_CTRL_REG1,
|
|
data->ctrl_reg1);
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
i = mma8452_get_scale_index(data, val, val2);
|
|
if (i < 0) {
|
|
ret = i;
|
|
break;
|
|
}
|
|
|
|
data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
|
|
data->data_cfg |= i;
|
|
|
|
ret = mma8452_change_config(data, MMA8452_DATA_CFG,
|
|
data->data_cfg);
|
|
break;
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
if (val < -128 || val > 127) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
ret = mma8452_change_config(data,
|
|
MMA8452_OFF_X + chan->scan_index,
|
|
val);
|
|
break;
|
|
|
|
case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
|
|
if (val == 0 && val2 == 0) {
|
|
data->data_cfg &= ~MMA8452_DATA_CFG_HPF_MASK;
|
|
} else {
|
|
data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK;
|
|
ret = mma8452_set_hp_filter_frequency(data, val, val2);
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
|
|
ret = mma8452_change_config(data, MMA8452_DATA_CFG,
|
|
data->data_cfg);
|
|
break;
|
|
|
|
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
|
|
ret = mma8452_get_odr_index(data);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) {
|
|
if (mma8452_os_ratio[i][ret] == val) {
|
|
ret = mma8452_set_power_mode(data, i);
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
iio_device_release_direct_mode(indio_dev);
|
|
return ret;
|
|
}
|
|
|
|
static int mma8452_read_thresh(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int *val, int *val2)
|
|
{
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
int ret, us, power_mode;
|
|
|
|
switch (info) {
|
|
case IIO_EV_INFO_VALUE:
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
data->chip_info->ev_ths);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = ret & data->chip_info->ev_ths_mask;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_EV_INFO_PERIOD:
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
data->chip_info->ev_count);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
power_mode = mma8452_get_power_mode(data);
|
|
if (power_mode < 0)
|
|
return power_mode;
|
|
|
|
us = ret * mma8452_transient_time_step_us[power_mode][
|
|
mma8452_get_odr_index(data)];
|
|
*val = us / USEC_PER_SEC;
|
|
*val2 = us % USEC_PER_SEC;
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
case IIO_EV_INFO_HIGH_PASS_FILTER_3DB:
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
MMA8452_TRANSIENT_CFG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & MMA8452_TRANSIENT_CFG_HPF_BYP) {
|
|
*val = 0;
|
|
*val2 = 0;
|
|
} else {
|
|
ret = mma8452_read_hp_filter(data, val, val2);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mma8452_write_thresh(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int val, int val2)
|
|
{
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
int ret, reg, steps;
|
|
|
|
switch (info) {
|
|
case IIO_EV_INFO_VALUE:
|
|
if (val < 0 || val > MMA8452_TRANSIENT_THS_MASK)
|
|
return -EINVAL;
|
|
|
|
return mma8452_change_config(data, data->chip_info->ev_ths,
|
|
val);
|
|
|
|
case IIO_EV_INFO_PERIOD:
|
|
ret = mma8452_get_power_mode(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
steps = (val * USEC_PER_SEC + val2) /
|
|
mma8452_transient_time_step_us[ret][
|
|
mma8452_get_odr_index(data)];
|
|
|
|
if (steps < 0 || steps > 0xff)
|
|
return -EINVAL;
|
|
|
|
return mma8452_change_config(data, data->chip_info->ev_count,
|
|
steps);
|
|
|
|
case IIO_EV_INFO_HIGH_PASS_FILTER_3DB:
|
|
reg = i2c_smbus_read_byte_data(data->client,
|
|
MMA8452_TRANSIENT_CFG);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
if (val == 0 && val2 == 0) {
|
|
reg |= MMA8452_TRANSIENT_CFG_HPF_BYP;
|
|
} else {
|
|
reg &= ~MMA8452_TRANSIENT_CFG_HPF_BYP;
|
|
ret = mma8452_set_hp_filter_frequency(data, val, val2);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return mma8452_change_config(data, MMA8452_TRANSIENT_CFG, reg);
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mma8452_read_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir)
|
|
{
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
const struct mma_chip_info *chip = data->chip_info;
|
|
int ret;
|
|
|
|
switch (dir) {
|
|
case IIO_EV_DIR_FALLING:
|
|
return mma8452_freefall_mode_enabled(data);
|
|
case IIO_EV_DIR_RISING:
|
|
if (mma8452_freefall_mode_enabled(data))
|
|
return 0;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
data->chip_info->ev_cfg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return !!(ret & BIT(chan->scan_index +
|
|
chip->ev_cfg_chan_shift));
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mma8452_write_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
int state)
|
|
{
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
const struct mma_chip_info *chip = data->chip_info;
|
|
int val, ret;
|
|
|
|
ret = mma8452_set_runtime_pm_state(data->client, state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (dir) {
|
|
case IIO_EV_DIR_FALLING:
|
|
return mma8452_set_freefall_mode(data, state);
|
|
case IIO_EV_DIR_RISING:
|
|
val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (state) {
|
|
if (mma8452_freefall_mode_enabled(data)) {
|
|
val &= ~BIT(idx_x + chip->ev_cfg_chan_shift);
|
|
val &= ~BIT(idx_y + chip->ev_cfg_chan_shift);
|
|
val &= ~BIT(idx_z + chip->ev_cfg_chan_shift);
|
|
val |= MMA8452_FF_MT_CFG_OAE;
|
|
}
|
|
val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift);
|
|
} else {
|
|
if (mma8452_freefall_mode_enabled(data))
|
|
return 0;
|
|
|
|
val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
|
|
}
|
|
|
|
val |= chip->ev_cfg_ele;
|
|
|
|
return mma8452_change_config(data, chip->ev_cfg, val);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void mma8452_transient_interrupt(struct iio_dev *indio_dev)
|
|
{
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
s64 ts = iio_get_time_ns(indio_dev);
|
|
int src;
|
|
|
|
src = i2c_smbus_read_byte_data(data->client, data->chip_info->ev_src);
|
|
if (src < 0)
|
|
return;
|
|
|
|
if (mma8452_freefall_mode_enabled(data)) {
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
|
|
IIO_MOD_X_AND_Y_AND_Z,
|
|
IIO_EV_TYPE_MAG,
|
|
IIO_EV_DIR_FALLING),
|
|
ts);
|
|
return;
|
|
}
|
|
|
|
if (src & data->chip_info->ev_src_xe)
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
|
|
IIO_EV_TYPE_MAG,
|
|
IIO_EV_DIR_RISING),
|
|
ts);
|
|
|
|
if (src & data->chip_info->ev_src_ye)
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y,
|
|
IIO_EV_TYPE_MAG,
|
|
IIO_EV_DIR_RISING),
|
|
ts);
|
|
|
|
if (src & data->chip_info->ev_src_ze)
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z,
|
|
IIO_EV_TYPE_MAG,
|
|
IIO_EV_DIR_RISING),
|
|
ts);
|
|
}
|
|
|
|
static irqreturn_t mma8452_interrupt(int irq, void *p)
|
|
{
|
|
struct iio_dev *indio_dev = p;
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
const struct mma_chip_info *chip = data->chip_info;
|
|
int ret = IRQ_NONE;
|
|
int src;
|
|
|
|
src = i2c_smbus_read_byte_data(data->client, MMA8452_INT_SRC);
|
|
if (src < 0)
|
|
return IRQ_NONE;
|
|
|
|
if (src & MMA8452_INT_DRDY) {
|
|
iio_trigger_poll_chained(indio_dev->trig);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if ((src & MMA8452_INT_TRANS &&
|
|
chip->ev_src == MMA8452_TRANSIENT_SRC) ||
|
|
(src & MMA8452_INT_FF_MT &&
|
|
chip->ev_src == MMA8452_FF_MT_SRC)) {
|
|
mma8452_transient_interrupt(indio_dev);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t mma8452_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
u8 buffer[16]; /* 3 16-bit channels + padding + ts */
|
|
int ret;
|
|
|
|
ret = mma8452_read(data, (__be16 *)buffer);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, buffer,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
done:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mma8452_reg_access_dbg(struct iio_dev *indio_dev,
|
|
unsigned reg, unsigned writeval,
|
|
unsigned *readval)
|
|
{
|
|
int ret;
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
|
|
if (reg > MMA8452_MAX_REG)
|
|
return -EINVAL;
|
|
|
|
if (!readval)
|
|
return mma8452_change_config(data, reg, writeval);
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*readval = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_event_spec mma8452_freefall_event[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_MAG,
|
|
.dir = IIO_EV_DIR_FALLING,
|
|
.mask_separate = BIT(IIO_EV_INFO_ENABLE),
|
|
.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_PERIOD) |
|
|
BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB)
|
|
},
|
|
};
|
|
|
|
static const struct iio_event_spec mma8652_freefall_event[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_MAG,
|
|
.dir = IIO_EV_DIR_FALLING,
|
|
.mask_separate = BIT(IIO_EV_INFO_ENABLE),
|
|
.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_PERIOD)
|
|
},
|
|
};
|
|
|
|
static const struct iio_event_spec mma8452_transient_event[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_MAG,
|
|
.dir = IIO_EV_DIR_RISING,
|
|
.mask_separate = BIT(IIO_EV_INFO_ENABLE),
|
|
.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_PERIOD) |
|
|
BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB)
|
|
},
|
|
};
|
|
|
|
static const struct iio_event_spec mma8452_motion_event[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_MAG,
|
|
.dir = IIO_EV_DIR_RISING,
|
|
.mask_separate = BIT(IIO_EV_INFO_ENABLE),
|
|
.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_PERIOD)
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Threshold is configured in fixed 8G/127 steps regardless of
|
|
* currently selected scale for measurement.
|
|
*/
|
|
static IIO_CONST_ATTR_NAMED(accel_transient_scale, in_accel_scale, "0.617742");
|
|
|
|
static struct attribute *mma8452_event_attributes[] = {
|
|
&iio_const_attr_accel_transient_scale.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group mma8452_event_attribute_group = {
|
|
.attrs = mma8452_event_attributes,
|
|
};
|
|
|
|
#define MMA8452_FREEFALL_CHANNEL(modifier) { \
|
|
.type = IIO_ACCEL, \
|
|
.modified = 1, \
|
|
.channel2 = modifier, \
|
|
.scan_index = -1, \
|
|
.event_spec = mma8452_freefall_event, \
|
|
.num_event_specs = ARRAY_SIZE(mma8452_freefall_event), \
|
|
}
|
|
|
|
#define MMA8652_FREEFALL_CHANNEL(modifier) { \
|
|
.type = IIO_ACCEL, \
|
|
.modified = 1, \
|
|
.channel2 = modifier, \
|
|
.scan_index = -1, \
|
|
.event_spec = mma8652_freefall_event, \
|
|
.num_event_specs = ARRAY_SIZE(mma8652_freefall_event), \
|
|
}
|
|
|
|
#define MMA8452_CHANNEL(axis, idx, bits) { \
|
|
.type = IIO_ACCEL, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_CALIBBIAS), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
|
|
BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) | \
|
|
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
|
|
.scan_index = idx, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = (bits), \
|
|
.storagebits = 16, \
|
|
.shift = 16 - (bits), \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
.event_spec = mma8452_transient_event, \
|
|
.num_event_specs = ARRAY_SIZE(mma8452_transient_event), \
|
|
}
|
|
|
|
#define MMA8652_CHANNEL(axis, idx, bits) { \
|
|
.type = IIO_ACCEL, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_CALIBBIAS), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
|
|
BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
|
|
.scan_index = idx, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = (bits), \
|
|
.storagebits = 16, \
|
|
.shift = 16 - (bits), \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
.event_spec = mma8452_motion_event, \
|
|
.num_event_specs = ARRAY_SIZE(mma8452_motion_event), \
|
|
}
|
|
|
|
static const struct iio_chan_spec mma8451_channels[] = {
|
|
MMA8452_CHANNEL(X, idx_x, 14),
|
|
MMA8452_CHANNEL(Y, idx_y, 14),
|
|
MMA8452_CHANNEL(Z, idx_z, 14),
|
|
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
|
|
MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
|
|
};
|
|
|
|
static const struct iio_chan_spec mma8452_channels[] = {
|
|
MMA8452_CHANNEL(X, idx_x, 12),
|
|
MMA8452_CHANNEL(Y, idx_y, 12),
|
|
MMA8452_CHANNEL(Z, idx_z, 12),
|
|
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
|
|
MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
|
|
};
|
|
|
|
static const struct iio_chan_spec mma8453_channels[] = {
|
|
MMA8452_CHANNEL(X, idx_x, 10),
|
|
MMA8452_CHANNEL(Y, idx_y, 10),
|
|
MMA8452_CHANNEL(Z, idx_z, 10),
|
|
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
|
|
MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
|
|
};
|
|
|
|
static const struct iio_chan_spec mma8652_channels[] = {
|
|
MMA8652_CHANNEL(X, idx_x, 12),
|
|
MMA8652_CHANNEL(Y, idx_y, 12),
|
|
MMA8652_CHANNEL(Z, idx_z, 12),
|
|
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
|
|
MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
|
|
};
|
|
|
|
static const struct iio_chan_spec mma8653_channels[] = {
|
|
MMA8652_CHANNEL(X, idx_x, 10),
|
|
MMA8652_CHANNEL(Y, idx_y, 10),
|
|
MMA8652_CHANNEL(Z, idx_z, 10),
|
|
IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
|
|
MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z),
|
|
};
|
|
|
|
enum {
|
|
mma8451,
|
|
mma8452,
|
|
mma8453,
|
|
mma8652,
|
|
mma8653,
|
|
fxls8471,
|
|
};
|
|
|
|
static const struct mma_chip_info mma_chip_info_table[] = {
|
|
[mma8451] = {
|
|
.chip_id = MMA8451_DEVICE_ID,
|
|
.channels = mma8451_channels,
|
|
.num_channels = ARRAY_SIZE(mma8451_channels),
|
|
/*
|
|
* Hardware has fullscale of -2G, -4G, -8G corresponding to
|
|
* raw value -8192 for 14 bit, -2048 for 12 bit or -512 for 10
|
|
* bit.
|
|
* The userspace interface uses m/s^2 and we declare micro units
|
|
* So scale factor for 12 bit here is given by:
|
|
* g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
|
|
*/
|
|
.mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} },
|
|
.ev_cfg = MMA8452_TRANSIENT_CFG,
|
|
.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
|
|
.ev_cfg_chan_shift = 1,
|
|
.ev_src = MMA8452_TRANSIENT_SRC,
|
|
.ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
|
|
.ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
|
|
.ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
|
|
.ev_ths = MMA8452_TRANSIENT_THS,
|
|
.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
|
|
.ev_count = MMA8452_TRANSIENT_COUNT,
|
|
},
|
|
[mma8452] = {
|
|
.chip_id = MMA8452_DEVICE_ID,
|
|
.channels = mma8452_channels,
|
|
.num_channels = ARRAY_SIZE(mma8452_channels),
|
|
.mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} },
|
|
.ev_cfg = MMA8452_TRANSIENT_CFG,
|
|
.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
|
|
.ev_cfg_chan_shift = 1,
|
|
.ev_src = MMA8452_TRANSIENT_SRC,
|
|
.ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
|
|
.ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
|
|
.ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
|
|
.ev_ths = MMA8452_TRANSIENT_THS,
|
|
.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
|
|
.ev_count = MMA8452_TRANSIENT_COUNT,
|
|
},
|
|
[mma8453] = {
|
|
.chip_id = MMA8453_DEVICE_ID,
|
|
.channels = mma8453_channels,
|
|
.num_channels = ARRAY_SIZE(mma8453_channels),
|
|
.mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} },
|
|
.ev_cfg = MMA8452_TRANSIENT_CFG,
|
|
.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
|
|
.ev_cfg_chan_shift = 1,
|
|
.ev_src = MMA8452_TRANSIENT_SRC,
|
|
.ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
|
|
.ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
|
|
.ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
|
|
.ev_ths = MMA8452_TRANSIENT_THS,
|
|
.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
|
|
.ev_count = MMA8452_TRANSIENT_COUNT,
|
|
},
|
|
[mma8652] = {
|
|
.chip_id = MMA8652_DEVICE_ID,
|
|
.channels = mma8652_channels,
|
|
.num_channels = ARRAY_SIZE(mma8652_channels),
|
|
.mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} },
|
|
.ev_cfg = MMA8452_FF_MT_CFG,
|
|
.ev_cfg_ele = MMA8452_FF_MT_CFG_ELE,
|
|
.ev_cfg_chan_shift = 3,
|
|
.ev_src = MMA8452_FF_MT_SRC,
|
|
.ev_src_xe = MMA8452_FF_MT_SRC_XHE,
|
|
.ev_src_ye = MMA8452_FF_MT_SRC_YHE,
|
|
.ev_src_ze = MMA8452_FF_MT_SRC_ZHE,
|
|
.ev_ths = MMA8452_FF_MT_THS,
|
|
.ev_ths_mask = MMA8452_FF_MT_THS_MASK,
|
|
.ev_count = MMA8452_FF_MT_COUNT,
|
|
},
|
|
[mma8653] = {
|
|
.chip_id = MMA8653_DEVICE_ID,
|
|
.channels = mma8653_channels,
|
|
.num_channels = ARRAY_SIZE(mma8653_channels),
|
|
.mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} },
|
|
.ev_cfg = MMA8452_FF_MT_CFG,
|
|
.ev_cfg_ele = MMA8452_FF_MT_CFG_ELE,
|
|
.ev_cfg_chan_shift = 3,
|
|
.ev_src = MMA8452_FF_MT_SRC,
|
|
.ev_src_xe = MMA8452_FF_MT_SRC_XHE,
|
|
.ev_src_ye = MMA8452_FF_MT_SRC_YHE,
|
|
.ev_src_ze = MMA8452_FF_MT_SRC_ZHE,
|
|
.ev_ths = MMA8452_FF_MT_THS,
|
|
.ev_ths_mask = MMA8452_FF_MT_THS_MASK,
|
|
.ev_count = MMA8452_FF_MT_COUNT,
|
|
},
|
|
[fxls8471] = {
|
|
.chip_id = FXLS8471_DEVICE_ID,
|
|
.channels = mma8451_channels,
|
|
.num_channels = ARRAY_SIZE(mma8451_channels),
|
|
.mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} },
|
|
.ev_cfg = MMA8452_TRANSIENT_CFG,
|
|
.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
|
|
.ev_cfg_chan_shift = 1,
|
|
.ev_src = MMA8452_TRANSIENT_SRC,
|
|
.ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
|
|
.ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
|
|
.ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
|
|
.ev_ths = MMA8452_TRANSIENT_THS,
|
|
.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
|
|
.ev_count = MMA8452_TRANSIENT_COUNT,
|
|
},
|
|
};
|
|
|
|
static struct attribute *mma8452_attributes[] = {
|
|
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
|
&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
|
|
&iio_dev_attr_in_accel_filter_high_pass_3db_frequency_available.dev_attr.attr,
|
|
&iio_dev_attr_in_accel_oversampling_ratio_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group mma8452_group = {
|
|
.attrs = mma8452_attributes,
|
|
};
|
|
|
|
static const struct iio_info mma8452_info = {
|
|
.attrs = &mma8452_group,
|
|
.read_raw = &mma8452_read_raw,
|
|
.write_raw = &mma8452_write_raw,
|
|
.event_attrs = &mma8452_event_attribute_group,
|
|
.read_event_value = &mma8452_read_thresh,
|
|
.write_event_value = &mma8452_write_thresh,
|
|
.read_event_config = &mma8452_read_event_config,
|
|
.write_event_config = &mma8452_write_event_config,
|
|
.debugfs_reg_access = &mma8452_reg_access_dbg,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static const unsigned long mma8452_scan_masks[] = {0x7, 0};
|
|
|
|
static int mma8452_data_rdy_trigger_set_state(struct iio_trigger *trig,
|
|
bool state)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
int reg, ret;
|
|
|
|
ret = mma8452_set_runtime_pm_state(data->client, state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG4);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
if (state)
|
|
reg |= MMA8452_INT_DRDY;
|
|
else
|
|
reg &= ~MMA8452_INT_DRDY;
|
|
|
|
return mma8452_change_config(data, MMA8452_CTRL_REG4, reg);
|
|
}
|
|
|
|
static const struct iio_trigger_ops mma8452_trigger_ops = {
|
|
.set_trigger_state = mma8452_data_rdy_trigger_set_state,
|
|
.validate_device = iio_trigger_validate_own_device,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int mma8452_trigger_setup(struct iio_dev *indio_dev)
|
|
{
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
struct iio_trigger *trig;
|
|
int ret;
|
|
|
|
trig = devm_iio_trigger_alloc(&data->client->dev, "%s-dev%d",
|
|
indio_dev->name,
|
|
indio_dev->id);
|
|
if (!trig)
|
|
return -ENOMEM;
|
|
|
|
trig->dev.parent = &data->client->dev;
|
|
trig->ops = &mma8452_trigger_ops;
|
|
iio_trigger_set_drvdata(trig, indio_dev);
|
|
|
|
ret = iio_trigger_register(trig);
|
|
if (ret)
|
|
return ret;
|
|
|
|
indio_dev->trig = trig;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mma8452_trigger_cleanup(struct iio_dev *indio_dev)
|
|
{
|
|
if (indio_dev->trig)
|
|
iio_trigger_unregister(indio_dev->trig);
|
|
}
|
|
|
|
static int mma8452_reset(struct i2c_client *client)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2,
|
|
MMA8452_CTRL_REG2_RST);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
usleep_range(100, 200);
|
|
ret = i2c_smbus_read_byte_data(client, MMA8452_CTRL_REG2);
|
|
if (ret == -EIO)
|
|
continue; /* I2C comm reset */
|
|
if (ret < 0)
|
|
return ret;
|
|
if (!(ret & MMA8452_CTRL_REG2_RST))
|
|
return 0;
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static const struct of_device_id mma8452_dt_ids[] = {
|
|
{ .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] },
|
|
{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
|
|
{ .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
|
|
{ .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] },
|
|
{ .compatible = "fsl,mma8653", .data = &mma_chip_info_table[mma8653] },
|
|
{ .compatible = "fsl,fxls8471", .data = &mma_chip_info_table[fxls8471] },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mma8452_dt_ids);
|
|
|
|
static int mma8452_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mma8452_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_device(mma8452_dt_ids, &client->dev);
|
|
if (!match) {
|
|
dev_err(&client->dev, "unknown device model\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
data->client = client;
|
|
mutex_init(&data->lock);
|
|
data->chip_info = match->data;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (ret) {
|
|
case MMA8451_DEVICE_ID:
|
|
case MMA8452_DEVICE_ID:
|
|
case MMA8453_DEVICE_ID:
|
|
case MMA8652_DEVICE_ID:
|
|
case MMA8653_DEVICE_ID:
|
|
case FXLS8471_DEVICE_ID:
|
|
if (ret == data->chip_info->chip_id)
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
|
|
match->compatible, data->chip_info->chip_id);
|
|
|
|
i2c_set_clientdata(client, indio_dev);
|
|
indio_dev->info = &mma8452_info;
|
|
indio_dev->name = id->name;
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = data->chip_info->channels;
|
|
indio_dev->num_channels = data->chip_info->num_channels;
|
|
indio_dev->available_scan_masks = mma8452_scan_masks;
|
|
|
|
ret = mma8452_reset(client);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->data_cfg = MMA8452_DATA_CFG_FS_2G;
|
|
ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG,
|
|
data->data_cfg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* By default set transient threshold to max to avoid events if
|
|
* enabling without configuring threshold.
|
|
*/
|
|
ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS,
|
|
MMA8452_TRANSIENT_THS_MASK);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (client->irq) {
|
|
/*
|
|
* Although we enable the interrupt sources once and for
|
|
* all here the event detection itself is not enabled until
|
|
* userspace asks for it by mma8452_write_event_config()
|
|
*/
|
|
int supported_interrupts = MMA8452_INT_DRDY |
|
|
MMA8452_INT_TRANS |
|
|
MMA8452_INT_FF_MT;
|
|
int enabled_interrupts = MMA8452_INT_TRANS |
|
|
MMA8452_INT_FF_MT;
|
|
int irq2;
|
|
|
|
irq2 = of_irq_get_byname(client->dev.of_node, "INT2");
|
|
|
|
if (irq2 == client->irq) {
|
|
dev_dbg(&client->dev, "using interrupt line INT2\n");
|
|
} else {
|
|
ret = i2c_smbus_write_byte_data(client,
|
|
MMA8452_CTRL_REG5,
|
|
supported_interrupts);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev_dbg(&client->dev, "using interrupt line INT1\n");
|
|
}
|
|
|
|
ret = i2c_smbus_write_byte_data(client,
|
|
MMA8452_CTRL_REG4,
|
|
enabled_interrupts);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = mma8452_trigger_setup(indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
|
|
(MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT);
|
|
ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1,
|
|
data->ctrl_reg1);
|
|
if (ret < 0)
|
|
goto trigger_cleanup;
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
mma8452_trigger_handler, NULL);
|
|
if (ret < 0)
|
|
goto trigger_cleanup;
|
|
|
|
if (client->irq) {
|
|
ret = devm_request_threaded_irq(&client->dev,
|
|
client->irq,
|
|
NULL, mma8452_interrupt,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
client->name, indio_dev);
|
|
if (ret)
|
|
goto buffer_cleanup;
|
|
}
|
|
|
|
ret = pm_runtime_set_active(&client->dev);
|
|
if (ret < 0)
|
|
goto buffer_cleanup;
|
|
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_set_autosuspend_delay(&client->dev,
|
|
MMA8452_AUTO_SUSPEND_DELAY_MS);
|
|
pm_runtime_use_autosuspend(&client->dev);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
goto buffer_cleanup;
|
|
|
|
ret = mma8452_set_freefall_mode(data, false);
|
|
if (ret < 0)
|
|
goto buffer_cleanup;
|
|
|
|
return 0;
|
|
|
|
buffer_cleanup:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
|
|
trigger_cleanup:
|
|
mma8452_trigger_cleanup(indio_dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mma8452_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
pm_runtime_put_noidle(&client->dev);
|
|
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
mma8452_trigger_cleanup(indio_dev);
|
|
mma8452_standby(iio_priv(indio_dev));
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int mma8452_runtime_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = mma8452_standby(data);
|
|
mutex_unlock(&data->lock);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "powering off device failed\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mma8452_runtime_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct mma8452_data *data = iio_priv(indio_dev);
|
|
int ret, sleep_val;
|
|
|
|
ret = mma8452_active(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = mma8452_get_odr_index(data);
|
|
sleep_val = 1000 / mma8452_samp_freq[ret][0];
|
|
if (sleep_val < 20)
|
|
usleep_range(sleep_val * 1000, 20000);
|
|
else
|
|
msleep_interruptible(sleep_val);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mma8452_suspend(struct device *dev)
|
|
{
|
|
return mma8452_standby(iio_priv(i2c_get_clientdata(
|
|
to_i2c_client(dev))));
|
|
}
|
|
|
|
static int mma8452_resume(struct device *dev)
|
|
{
|
|
return mma8452_active(iio_priv(i2c_get_clientdata(
|
|
to_i2c_client(dev))));
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops mma8452_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(mma8452_suspend, mma8452_resume)
|
|
SET_RUNTIME_PM_OPS(mma8452_runtime_suspend,
|
|
mma8452_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct i2c_device_id mma8452_id[] = {
|
|
{ "mma8451", mma8451 },
|
|
{ "mma8452", mma8452 },
|
|
{ "mma8453", mma8453 },
|
|
{ "mma8652", mma8652 },
|
|
{ "mma8653", mma8653 },
|
|
{ "fxls8471", fxls8471 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mma8452_id);
|
|
|
|
static struct i2c_driver mma8452_driver = {
|
|
.driver = {
|
|
.name = "mma8452",
|
|
.of_match_table = of_match_ptr(mma8452_dt_ids),
|
|
.pm = &mma8452_pm_ops,
|
|
},
|
|
.probe = mma8452_probe,
|
|
.remove = mma8452_remove,
|
|
.id_table = mma8452_id,
|
|
};
|
|
module_i2c_driver(mma8452_driver);
|
|
|
|
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
|
|
MODULE_DESCRIPTION("Freescale / NXP MMA8452 accelerometer driver");
|
|
MODULE_LICENSE("GPL");
|