kernel-ark/drivers/video/virgefb.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

289 lines
8.8 KiB
C

/*
* linux/drivers/video/virgefb.h -- CyberVision64 definitions for the
* text console driver.
*
* Copyright (c) 1998 Alan Bair
*
* This file is based on the initial port to Linux of grf_cvreg.h:
*
* Copyright (c) 1997 Antonio Santos
*
* The original work is from the NetBSD CyberVision 64 framebuffer driver
* and support files (grf_cv.c, grf_cvreg.h, ite_cv.c):
* Permission to use the source of this driver was obtained from the
* author Michael Teske by Alan Bair.
*
* Copyright (c) 1995 Michael Teske
*
* History:
*
*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/* Enhanced register mapping (MMIO mode) */
#define S3_CRTC_ADR 0x03d4
#define S3_CRTC_DATA 0x03d5
#define S3_REG_LOCK2 0x39
#define S3_HGC_MODE 0x45
#define S3_HWGC_ORGX_H 0x46
#define S3_HWGC_ORGX_L 0x47
#define S3_HWGC_ORGY_H 0x48
#define S3_HWGC_ORGY_L 0x49
#define S3_HWGC_DX 0x4e
#define S3_HWGC_DY 0x4f
#define S3_LAW_CTL 0x58
/**************************************************/
/*
* Defines for the used register addresses (mw)
*
* NOTE: There are some registers that have different addresses when
* in mono or color mode. We only support color mode, and thus
* some addresses won't work in mono-mode!
*
* General and VGA-registers taken from retina driver. Fixed a few
* bugs in it. (SR and GR read address is Port + 1, NOT Port)
*
*/
/* General Registers: */
#define GREG_MISC_OUTPUT_R 0x03CC
#define GREG_MISC_OUTPUT_W 0x03C2
#define GREG_FEATURE_CONTROL_R 0x03CA
#define GREG_FEATURE_CONTROL_W 0x03DA
#define GREG_INPUT_STATUS0_R 0x03C2
#define GREG_INPUT_STATUS1_R 0x03DA
/* Setup Registers: */
#define SREG_VIDEO_SUBS_ENABLE 0x03C3 /* virge */
/* Attribute Controller: */
#define ACT_ADDRESS 0x03C0
#define ACT_ADDRESS_R 0x03C1
#define ACT_ADDRESS_W 0x03C0
#define ACT_ADDRESS_RESET 0x03DA
#define ACT_ID_PALETTE0 0x00
#define ACT_ID_PALETTE1 0x01
#define ACT_ID_PALETTE2 0x02
#define ACT_ID_PALETTE3 0x03
#define ACT_ID_PALETTE4 0x04
#define ACT_ID_PALETTE5 0x05
#define ACT_ID_PALETTE6 0x06
#define ACT_ID_PALETTE7 0x07
#define ACT_ID_PALETTE8 0x08
#define ACT_ID_PALETTE9 0x09
#define ACT_ID_PALETTE10 0x0A
#define ACT_ID_PALETTE11 0x0B
#define ACT_ID_PALETTE12 0x0C
#define ACT_ID_PALETTE13 0x0D
#define ACT_ID_PALETTE14 0x0E
#define ACT_ID_PALETTE15 0x0F
#define ACT_ID_ATTR_MODE_CNTL 0x10
#define ACT_ID_OVERSCAN_COLOR 0x11
#define ACT_ID_COLOR_PLANE_ENA 0x12
#define ACT_ID_HOR_PEL_PANNING 0x13
#define ACT_ID_COLOR_SELECT 0x14 /* virge PX_PADD pixel padding register */
/* Graphics Controller: */
#define GCT_ADDRESS 0x03CE
#define GCT_ADDRESS_R 0x03CF
#define GCT_ADDRESS_W 0x03CF
#define GCT_ID_SET_RESET 0x00
#define GCT_ID_ENABLE_SET_RESET 0x01
#define GCT_ID_COLOR_COMPARE 0x02
#define GCT_ID_DATA_ROTATE 0x03
#define GCT_ID_READ_MAP_SELECT 0x04
#define GCT_ID_GRAPHICS_MODE 0x05
#define GCT_ID_MISC 0x06
#define GCT_ID_COLOR_XCARE 0x07
#define GCT_ID_BITMASK 0x08
/* Sequencer: */
#define SEQ_ADDRESS 0x03C4
#define SEQ_ADDRESS_R 0x03C5
#define SEQ_ADDRESS_W 0x03C5
#define SEQ_ID_RESET 0x00
#define SEQ_ID_CLOCKING_MODE 0x01
#define SEQ_ID_MAP_MASK 0x02
#define SEQ_ID_CHAR_MAP_SELECT 0x03
#define SEQ_ID_MEMORY_MODE 0x04
#define SEQ_ID_UNKNOWN1 0x05
#define SEQ_ID_UNKNOWN2 0x06
#define SEQ_ID_UNKNOWN3 0x07
/* S3 extensions */
#define SEQ_ID_UNLOCK_EXT 0x08
#define SEQ_ID_EXT_SEQ_REG9 0x09 /* b7 = 1 extended reg access by MMIO only */
#define SEQ_ID_BUS_REQ_CNTL 0x0A
#define SEQ_ID_EXT_MISC_SEQ 0x0B
#define SEQ_ID_UNKNOWN4 0x0C
#define SEQ_ID_EXT_SEQ 0x0D
#define SEQ_ID_UNKNOWN5 0x0E
#define SEQ_ID_UNKNOWN6 0x0F
#define SEQ_ID_MCLK_LO 0x10
#define SEQ_ID_MCLK_HI 0x11
#define SEQ_ID_DCLK_LO 0x12
#define SEQ_ID_DCLK_HI 0x13
#define SEQ_ID_CLKSYN_CNTL_1 0x14
#define SEQ_ID_CLKSYN_CNTL_2 0x15
#define SEQ_ID_CLKSYN_TEST_HI 0x16 /* reserved for S3 testing of the */
#define SEQ_ID_CLKSYN_TEST_LO 0x17 /* internal clock synthesizer */
#define SEQ_ID_RAMDAC_CNTL 0x18
#define SEQ_ID_MORE_MAGIC 0x1A
#define SEQ_ID_SIGNAL_SELECT 0x1C /* new for virge */
/* CRT Controller: */
#define CRT_ADDRESS 0x03D4
#define CRT_ADDRESS_R 0x03D5
#define CRT_ADDRESS_W 0x03D5
#define CRT_ID_HOR_TOTAL 0x00
#define CRT_ID_HOR_DISP_ENA_END 0x01
#define CRT_ID_START_HOR_BLANK 0x02
#define CRT_ID_END_HOR_BLANK 0x03
#define CRT_ID_START_HOR_RETR 0x04
#define CRT_ID_END_HOR_RETR 0x05
#define CRT_ID_VER_TOTAL 0x06
#define CRT_ID_OVERFLOW 0x07
#define CRT_ID_PRESET_ROW_SCAN 0x08
#define CRT_ID_MAX_SCAN_LINE 0x09
#define CRT_ID_CURSOR_START 0x0A
#define CRT_ID_CURSOR_END 0x0B
#define CRT_ID_START_ADDR_HIGH 0x0C
#define CRT_ID_START_ADDR_LOW 0x0D
#define CRT_ID_CURSOR_LOC_HIGH 0x0E
#define CRT_ID_CURSOR_LOC_LOW 0x0F
#define CRT_ID_START_VER_RETR 0x10
#define CRT_ID_END_VER_RETR 0x11
#define CRT_ID_VER_DISP_ENA_END 0x12
#define CRT_ID_SCREEN_OFFSET 0x13
#define CRT_ID_UNDERLINE_LOC 0x14
#define CRT_ID_START_VER_BLANK 0x15
#define CRT_ID_END_VER_BLANK 0x16
#define CRT_ID_MODE_CONTROL 0x17
#define CRT_ID_LINE_COMPARE 0x18
#define CRT_ID_GD_LATCH_RBACK 0x22
#define CRT_ID_ACT_TOGGLE_RBACK 0x24
#define CRT_ID_ACT_INDEX_RBACK 0x26
/* S3 extensions: S3 VGA Registers */
#define CRT_ID_DEVICE_HIGH 0x2D
#define CRT_ID_DEVICE_LOW 0x2E
#define CRT_ID_REVISION 0x2F
#define CRT_ID_CHIP_ID_REV 0x30
#define CRT_ID_MEMORY_CONF 0x31
#define CRT_ID_BACKWAD_COMP_1 0x32
#define CRT_ID_BACKWAD_COMP_2 0x33
#define CRT_ID_BACKWAD_COMP_3 0x34
#define CRT_ID_REGISTER_LOCK 0x35
#define CRT_ID_CONFIG_1 0x36
#define CRT_ID_CONFIG_2 0x37
#define CRT_ID_REGISTER_LOCK_1 0x38
#define CRT_ID_REGISTER_LOCK_2 0x39
#define CRT_ID_MISC_1 0x3A
#define CRT_ID_DISPLAY_FIFO 0x3B
#define CRT_ID_LACE_RETR_START 0x3C
/* S3 extensions: System Control Registers */
#define CRT_ID_SYSTEM_CONFIG 0x40
#define CRT_ID_BIOS_FLAG 0x41
#define CRT_ID_LACE_CONTROL 0x42
#define CRT_ID_EXT_MODE 0x43
#define CRT_ID_HWGC_MODE 0x45 /* HWGC = Hardware Graphics Cursor */
#define CRT_ID_HWGC_ORIGIN_X_HI 0x46
#define CRT_ID_HWGC_ORIGIN_X_LO 0x47
#define CRT_ID_HWGC_ORIGIN_Y_HI 0x48
#define CRT_ID_HWGC_ORIGIN_Y_LO 0x49
#define CRT_ID_HWGC_FG_STACK 0x4A
#define CRT_ID_HWGC_BG_STACK 0x4B
#define CRT_ID_HWGC_START_AD_HI 0x4C
#define CRT_ID_HWGC_START_AD_LO 0x4D
#define CRT_ID_HWGC_DSTART_X 0x4E
#define CRT_ID_HWGC_DSTART_Y 0x4F
/* S3 extensions: System Extension Registers */
#define CRT_ID_EXT_SYS_CNTL_1 0x50 /* NOT a virge register */
#define CRT_ID_EXT_SYS_CNTL_2 0x51
#define CRT_ID_EXT_BIOS_FLAG_1 0x52
#define CRT_ID_EXT_MEM_CNTL_1 0x53
#define CRT_ID_EXT_MEM_CNTL_2 0x54
#define CRT_ID_EXT_DAC_CNTL 0x55
#define CRT_ID_EX_SYNC_1 0x56
#define CRT_ID_EX_SYNC_2 0x57
#define CRT_ID_LAW_CNTL 0x58 /* LAW = Linear Address Window */
#define CRT_ID_LAW_POS_HI 0x59
#define CRT_ID_LAW_POS_LO 0x5A
#define CRT_ID_GOUT_PORT 0x5C
#define CRT_ID_EXT_HOR_OVF 0x5D
#define CRT_ID_EXT_VER_OVF 0x5E
#define CRT_ID_EXT_MEM_CNTL_3 0x60 /* NOT a virge register */
#define CRT_ID_EXT_MEM_CNTL_4 0x61
#define CRT_ID_EX_SYNC_3 0x63 /* NOT a virge register */
#define CRT_ID_EXT_MISC_CNTL 0x65
#define CRT_ID_EXT_MISC_CNTL_1 0x66
#define CRT_ID_EXT_MISC_CNTL_2 0x67
#define CRT_ID_CONFIG_3 0x68
#define CRT_ID_EXT_SYS_CNTL_3 0x69
#define CRT_ID_EXT_SYS_CNTL_4 0x6A
#define CRT_ID_EXT_BIOS_FLAG_3 0x6B
#define CRT_ID_EXT_BIOS_FLAG_4 0x6C
/* S3 virge extensions: more System Extension Registers */
#define CRT_ID_EXT_BIOS_FLAG_5 0x6D
#define CRT_ID_EXT_DAC_TEST 0x6E
#define CRT_ID_CONFIG_4 0x6F
/* Video DAC */
#define VDAC_ADDRESS 0x03c8
#define VDAC_ADDRESS_W 0x03c8
#define VDAC_ADDRESS_R 0x03c7
#define VDAC_STATE 0x03c7
#define VDAC_DATA 0x03c9
#define VDAC_MASK 0x03c6
/* Miscellaneous Registers */
#define MR_SUBSYSTEM_STATUS_R 0x8504 /* new for virge */
#define MR_SUBSYSTEM_CNTL_W 0x8504 /* new for virge */
#define MR_ADVANCED_FUNCTION_CONTROL 0x850C /* new for virge */
/* Blitter */
#define BLT_COMMAND_SET 0xA500
#define BLT_SIZE_X_Y 0xA504
#define BLT_SRC_X_Y 0xA508
#define BLT_DEST_X_Y 0xA50C
#define BLT_SRC_BASE 0xa4d4
#define BLT_DEST_BASE 0xa4d8
#define BLT_CLIP_LEFT_RIGHT 0xa4dc
#define BLT_CLIP_TOP_BOTTOM 0xa4e0
#define BLT_SRC_DEST_STRIDE 0xa4e4
#define BLT_MONO_PATTERN_0 0xa4e8
#define BLT_MONO_PATTERN_1 0xa4ec
#define BLT_PATTERN_COLOR 0xa4f4
#define L2D_COMMAND_SET 0xA900
#define L2D_CLIP_LEFT_RIGHT 0xA8DC
#define L2D_CLIP_TOP_BOTTOM 0xA8E0
#define P2D_COMMAND_SET 0xAD00
#define P2D_CLIP_LEFT_RIGHT 0xACDC
#define P2D_CLIP_TOP_BOTTOM 0xACE0
#define CMD_NOP (0xf << 27) /* %1111 << 27, was 0x07 */
#define S3V_BITBLT (0x0 << 27)
#define S3V_RECTFILL (0x2 << 27)
#define S3V_AUTOEXE 0x01
#define S3V_HWCLIP 0x02
#define S3V_DRAW 0x20
#define S3V_DST_8BPP 0x00
#define S3V_DST_16BPP 0x04
#define S3V_DST_24BPP 0x08
#define S3V_MONO_PAT 0x100
#define S3V_BLT_COPY (0xcc<<17)
#define S3V_BLT_CLEAR (0x00<<17)
#define S3V_BLT_SET (0xff<<17)