kernel-ark/arch/powerpc/boot/dts/mpc8541cds.dts
Kumar Gala 1b3c5cdab4 [POWERPC] Move PCI nodes to be sibilings with SOC nodes
Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:22 -05:00

244 lines
5.5 KiB
Plaintext

/*
* MPC8541 CDS Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8541CDS";
compatible = "MPC8541CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8541@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
};
};
memory {
device_type = "memory";
reg = <00000000 08000000>; // 128M at 0x0
};
soc8541@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00001000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8541-memory-controller";
reg = <2000 1000>;
interrupt-parent = <&mpic>;
interrupts = <12 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8541-l2-cache-controller";
reg = <20000 1000>;
cache-line-size = <20>; // 32 bytes
cache-size = <40000>; // L2, 256K
interrupt-parent = <&mpic>;
interrupts = <10 2>;
};
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <2b 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <1>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <1d 2 1e 2 22 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 2 24 2 28 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <2a 2>;
interrupt-parent = <&mpic>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <2a 2>;
interrupt-parent = <&mpic>;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
};
pci1: pci@e0008000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 &mpic 0 1
08000 0 0 2 &mpic 1 1
08000 0 0 3 &mpic 2 1
08000 0 0 4 &mpic 3 1
/* IDSEL 0x11 */
08800 0 0 1 &mpic 0 1
08800 0 0 2 &mpic 1 1
08800 0 0 3 &mpic 2 1
08800 0 0 4 &mpic 3 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 &mpic 0 1
09000 0 0 2 &mpic 1 1
09000 0 0 3 &mpic 2 1
09000 0 0 4 &mpic 3 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 &mpic 1 1
09800 0 0 2 &mpic 2 1
09800 0 0 3 &mpic 3 1
09800 0 0 4 &mpic 0 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 &mpic 2 1
0a000 0 0 2 &mpic 3 1
0a000 0 0 3 &mpic 0 1
0a000 0 0 4 &mpic 1 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 &mpic 3 1
0a800 0 0 2 &mpic 0 1
0a800 0 0 3 &mpic 1 1
0a800 0 0 4 &mpic 2 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 &mpic 0 1
19000 0 0 2 &mpic 1 1
19000 0 0 3 &mpic 2 1
19000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <19000 0 0 0 1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <1>;
interrupt-parent = <&pci1>;
};
};
pci@e0009000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 &mpic b 1
a800 0 0 2 &mpic b 1
a800 0 0 3 &mpic b 1
a800 0 0 4 &mpic b 1>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0009000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
};