kernel-ark/include/asm-mn10300/dma-mapping.h
David Howells b920de1b77 mn10300: add the MN10300/AM33 architecture to the kernel
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:30 -08:00

235 lines
6.4 KiB
C

/* DMA mapping routines for the MN10300 arch
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#ifndef _ASM_DMA_MAPPING_H
#define _ASM_DMA_MAPPING_H
#include <linux/mm.h>
#include <linux/scatterlist.h>
#include <asm/cache.h>
#include <asm/io.h>
extern void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, int flag);
extern void dma_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h))
/*
* Map a single buffer of the indicated size for DMA in streaming mode. The
* 32-bit bus address to use is returned.
*
* Once the device is given the dma address, the device owns this memory until
* either pci_unmap_single or pci_dma_sync_single is performed.
*/
static inline
dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
mn10300_dcache_flush_inv();
return virt_to_bus(ptr);
}
/*
* Unmap a single streaming mode DMA translation. The dma_addr and size must
* match what was provided for in a previous pci_map_single call. All other
* usages are undefined.
*
* After this call, reads by the cpu to the buffer are guarenteed to see
* whatever the device wrote there.
*/
static inline
void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
}
/*
* Map a set of buffers described by scatterlist in streaming mode for DMA.
* This is the scather-gather version of the above pci_map_single interface.
* Here the scatter gather list elements are each tagged with the appropriate
* dma address and length. They are obtained via sg_dma_{address,length}(SG).
*
* NOTE: An implementation may be able to use a smaller number of DMA
* address/length pairs than there are SG table elements. (for example
* via virtual mapping capabilities) The routine returns the number of
* addr/length pairs actually used, at most nents.
*
* Device ownership issues as mentioned above for pci_map_single are the same
* here.
*/
static inline
int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
enum dma_data_direction direction)
{
struct scatterlist *sg;
int i;
BUG_ON(!valid_dma_direction(direction));
WARN_ON(nents == 0 || sglist[0].length == 0);
for_each_sg(sglist, sg, nents, i) {
BUG_ON(!sg_page(sg));
sg->dma_address = sg_phys(sg);
}
mn10300_dcache_flush_inv();
return nents;
}
/*
* Unmap a set of streaming mode DMA translations.
* Again, cpu read rules concerning calls here are the same as for
* pci_unmap_single() above.
*/
static inline
void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
enum dma_data_direction direction)
{
BUG_ON(!valid_dma_direction(direction));
}
/*
* pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
* to pci_map_single, but takes a struct page instead of a virtual address
*/
static inline
dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
return page_to_bus(page) + offset;
}
static inline
void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
}
/*
* Make physical memory consistent for a single streaming mode DMA translation
* after a transfer.
*
* If you perform a pci_map_single() but wish to interrogate the buffer using
* the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
* function before doing so. At the next point you give the PCI dma address
* back to the card, the device again owns the buffer.
*/
static inline
void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
}
static inline
void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
mn10300_dcache_flush_inv();
}
static inline
void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
unsigned long offset, size_t size,
enum dma_data_direction direction)
{
}
static inline void
dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
unsigned long offset, size_t size,
enum dma_data_direction direction)
{
mn10300_dcache_flush_inv();
}
/*
* Make physical memory consistent for a set of streaming mode DMA translations
* after a transfer.
*
* The same as pci_dma_sync_single but for a scatter-gather list, same rules
* and usage.
*/
static inline
void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
int nelems, enum dma_data_direction direction)
{
}
static inline
void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
int nelems, enum dma_data_direction direction)
{
mn10300_dcache_flush_inv();
}
static inline
int dma_mapping_error(dma_addr_t dma_addr)
{
return 0;
}
/*
* Return whether the given PCI device DMA address mask can be supported
* properly. For example, if your device can only drive the low 24-bits during
* PCI bus mastering, then you would pass 0x00ffffff as the mask to this
* function.
*/
static inline
int dma_supported(struct device *dev, u64 mask)
{
/*
* we fall back to GFP_DMA when the mask isn't all 1s, so we can't
* guarantee allocations that must be within a tighter range than
* GFP_DMA
*/
if (mask < 0x00ffffff)
return 0;
return 1;
}
static inline
int dma_set_mask(struct device *dev, u64 mask)
{
if (!dev->dma_mask || !dma_supported(dev, mask))
return -EIO;
*dev->dma_mask = mask;
return 0;
}
static inline
int dma_get_cache_alignment(void)
{
return 1 << L1_CACHE_SHIFT;
}
#define dma_is_consistent(d) (1)
static inline
void dma_cache_sync(void *vaddr, size_t size,
enum dma_data_direction direction)
{
mn10300_dcache_flush_inv();
}
#endif