davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
1f6268e982
kernel-ark/include/asm-blackfin/mach-bf548/defBF549.h
Roy Huang 24a07a1241 Blackfin arch: initial supporting for BF548-EZKIT 
The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia
applications where system performance and cost are essential ingredients. The
integration of multimedia, human interface, and connectivity peripherals combined
with increased system bandwidth and on-chip memory provides customers a platform to
design the most demanding applications.

Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers
such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will
be submitted later.

Please enjoy the show.

Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 22:41:45 +08:00

2736 lines
177 KiB
C
Raw Blame History

/*
* File: include/asm-blackfin/mach-bf548/defBF549.h
* Based on:
* Author:
*
* Created:
* Description:
*
* Rev:
*
* Modified:
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING.
* If not, write to the Free Software Foundation,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef _DEF_BF549_H
#define _DEF_BF549_H
/* Include all Core registers and bit definitions */
#include <asm/mach-common/def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
#include "defBF54x_base.h"
/* The following are the #defines needed by ADSP-BF549 that are not in the common header */
/* Timer Registers */
#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */
#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */
#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */
#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */
#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */
#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */
#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */
#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */
#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */
#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */
#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */
#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */
/* Timer Group of 3 Registers */
#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */
#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */
#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */
/* SPORT0 Registers */
#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */
#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */
#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */
#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */
#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */
#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */
#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */
#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */
#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */
#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */
#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */
#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */
#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */
#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */
#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */
#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */
#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */
#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */
#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */
#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */
/* EPPI0 Registers */
#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */
#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */
#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */
#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */
#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */
#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */
#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */
#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */
#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */
#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */
/* UART2 Registers */
#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */
#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */
#define UART2_GCTL 0xffc02108 /* Global Control Register */
#define UART2_LCR 0xffc0210c /* Line Control Register */
#define UART2_MCR 0xffc02110 /* Modem Control Register */
#define UART2_LSR 0xffc02114 /* Line Status Register */
#define UART2_MSR 0xffc02118 /* Modem Status Register */
#define UART2_SCR 0xffc0211c /* Scratch Register */
#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */
#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */
#define UART2_RBR 0xffc0212c /* Receive Buffer Register */
/* Two Wire Interface Registers (TWI1) */
#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */
#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */
#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */
#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */
#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */
#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */
#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */
#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */
#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */
#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */
#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */
#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */
#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */
#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */
/* SPI2 Registers */
#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */
#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */
#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */
#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */
#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */
#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */
#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */
/* MXVR Registers */
#define MXVR_CONFIG 0xffc02700 /* MXVR Configuration Register */
#define MXVR_STATE_0 0xffc02708 /* MXVR State Register 0 */
#define MXVR_STATE_1 0xffc0270c /* MXVR State Register 1 */
#define MXVR_INT_STAT_0 0xffc02710 /* MXVR Interrupt Status Register 0 */
#define MXVR_INT_STAT_1 0xffc02714 /* MXVR Interrupt Status Register 1 */
#define MXVR_INT_EN_0 0xffc02718 /* MXVR Interrupt Enable Register 0 */
#define MXVR_INT_EN_1 0xffc0271c /* MXVR Interrupt Enable Register 1 */
#define MXVR_POSITION 0xffc02720 /* MXVR Node Position Register */
#define MXVR_MAX_POSITION 0xffc02724 /* MXVR Maximum Node Position Register */
#define MXVR_DELAY 0xffc02728 /* MXVR Node Frame Delay Register */
#define MXVR_MAX_DELAY 0xffc0272c /* MXVR Maximum Node Frame Delay Register */
#define MXVR_LADDR 0xffc02730 /* MXVR Logical Address Register */
#define MXVR_GADDR 0xffc02734 /* MXVR Group Address Register */
#define MXVR_AADDR 0xffc02738 /* MXVR Alternate Address Register */
/* MXVR Allocation Table Registers */
#define MXVR_ALLOC_0 0xffc0273c /* MXVR Allocation Table Register 0 */
#define MXVR_ALLOC_1 0xffc02740 /* MXVR Allocation Table Register 1 */
#define MXVR_ALLOC_2 0xffc02744 /* MXVR Allocation Table Register 2 */
#define MXVR_ALLOC_3 0xffc02748 /* MXVR Allocation Table Register 3 */
#define MXVR_ALLOC_4 0xffc0274c /* MXVR Allocation Table Register 4 */
#define MXVR_ALLOC_5 0xffc02750 /* MXVR Allocation Table Register 5 */
#define MXVR_ALLOC_6 0xffc02754 /* MXVR Allocation Table Register 6 */
#define MXVR_ALLOC_7 0xffc02758 /* MXVR Allocation Table Register 7 */
#define MXVR_ALLOC_8 0xffc0275c /* MXVR Allocation Table Register 8 */
#define MXVR_ALLOC_9 0xffc02760 /* MXVR Allocation Table Register 9 */
#define MXVR_ALLOC_10 0xffc02764 /* MXVR Allocation Table Register 10 */
#define MXVR_ALLOC_11 0xffc02768 /* MXVR Allocation Table Register 11 */
#define MXVR_ALLOC_12 0xffc0276c /* MXVR Allocation Table Register 12 */
#define MXVR_ALLOC_13 0xffc02770 /* MXVR Allocation Table Register 13 */
#define MXVR_ALLOC_14 0xffc02774 /* MXVR Allocation Table Register 14 */
/* MXVR Channel Assign Registers */
#define MXVR_SYNC_LCHAN_0 0xffc02778 /* MXVR Sync Data Logical Channel Assign Register 0 */
#define MXVR_SYNC_LCHAN_1 0xffc0277c /* MXVR Sync Data Logical Channel Assign Register 1 */
#define MXVR_SYNC_LCHAN_2 0xffc02780 /* MXVR Sync Data Logical Channel Assign Register 2 */
#define MXVR_SYNC_LCHAN_3 0xffc02784 /* MXVR Sync Data Logical Channel Assign Register 3 */
#define MXVR_SYNC_LCHAN_4 0xffc02788 /* MXVR Sync Data Logical Channel Assign Register 4 */
#define MXVR_SYNC_LCHAN_5 0xffc0278c /* MXVR Sync Data Logical Channel Assign Register 5 */
#define MXVR_SYNC_LCHAN_6 0xffc02790 /* MXVR Sync Data Logical Channel Assign Register 6 */
#define MXVR_SYNC_LCHAN_7 0xffc02794 /* MXVR Sync Data Logical Channel Assign Register 7 */
/* MXVR DMA0 Registers */
#define MXVR_DMA0_CONFIG 0xffc02798 /* MXVR Sync Data DMA0 Config Register */
#define MXVR_DMA0_START_ADDR 0xffc0279c /* MXVR Sync Data DMA0 Start Address */
#define MXVR_DMA0_COUNT 0xffc027a0 /* MXVR Sync Data DMA0 Loop Count Register */
#define MXVR_DMA0_CURR_ADDR 0xffc027a4 /* MXVR Sync Data DMA0 Current Address */
#define MXVR_DMA0_CURR_COUNT 0xffc027a8 /* MXVR Sync Data DMA0 Current Loop Count */
/* MXVR DMA1 Registers */
#define MXVR_DMA1_CONFIG 0xffc027ac /* MXVR Sync Data DMA1 Config Register */
#define MXVR_DMA1_START_ADDR 0xffc027b0 /* MXVR Sync Data DMA1 Start Address */
#define MXVR_DMA1_COUNT 0xffc027b4 /* MXVR Sync Data DMA1 Loop Count Register */
#define MXVR_DMA1_CURR_ADDR 0xffc027b8 /* MXVR Sync Data DMA1 Current Address */
#define MXVR_DMA1_CURR_COUNT 0xffc027bc /* MXVR Sync Data DMA1 Current Loop Count */
/* MXVR DMA2 Registers */
#define MXVR_DMA2_CONFIG 0xffc027c0 /* MXVR Sync Data DMA2 Config Register */
#define MXVR_DMA2_START_ADDR 0xffc027c4 /* MXVR Sync Data DMA2 Start Address */
#define MXVR_DMA2_COUNT 0xffc027c8 /* MXVR Sync Data DMA2 Loop Count Register */
#define MXVR_DMA2_CURR_ADDR 0xffc027cc /* MXVR Sync Data DMA2 Current Address */
#define MXVR_DMA2_CURR_COUNT 0xffc027d0 /* MXVR Sync Data DMA2 Current Loop Count */
/* MXVR DMA3 Registers */
#define MXVR_DMA3_CONFIG 0xffc027d4 /* MXVR Sync Data DMA3 Config Register */
#define MXVR_DMA3_START_ADDR 0xffc027d8 /* MXVR Sync Data DMA3 Start Address */
#define MXVR_DMA3_COUNT 0xffc027dc /* MXVR Sync Data DMA3 Loop Count Register */
#define MXVR_DMA3_CURR_ADDR 0xffc027e0 /* MXVR Sync Data DMA3 Current Address */
#define MXVR_DMA3_CURR_COUNT 0xffc027e4 /* MXVR Sync Data DMA3 Current Loop Count */
/* MXVR DMA4 Registers */
#define MXVR_DMA4_CONFIG 0xffc027e8 /* MXVR Sync Data DMA4 Config Register */
#define MXVR_DMA4_START_ADDR 0xffc027ec /* MXVR Sync Data DMA4 Start Address */
#define MXVR_DMA4_COUNT 0xffc027f0 /* MXVR Sync Data DMA4 Loop Count Register */
#define MXVR_DMA4_CURR_ADDR 0xffc027f4 /* MXVR Sync Data DMA4 Current Address */
#define MXVR_DMA4_CURR_COUNT 0xffc027f8 /* MXVR Sync Data DMA4 Current Loop Count */
/* MXVR DMA5 Registers */
#define MXVR_DMA5_CONFIG 0xffc027fc /* MXVR Sync Data DMA5 Config Register */
#define MXVR_DMA5_START_ADDR 0xffc02800 /* MXVR Sync Data DMA5 Start Address */
#define MXVR_DMA5_COUNT 0xffc02804 /* MXVR Sync Data DMA5 Loop Count Register */
#define MXVR_DMA5_CURR_ADDR 0xffc02808 /* MXVR Sync Data DMA5 Current Address */
#define MXVR_DMA5_CURR_COUNT 0xffc0280c /* MXVR Sync Data DMA5 Current Loop Count */
/* MXVR DMA6 Registers */
#define MXVR_DMA6_CONFIG 0xffc02810 /* MXVR Sync Data DMA6 Config Register */
#define MXVR_DMA6_START_ADDR 0xffc02814 /* MXVR Sync Data DMA6 Start Address */
#define MXVR_DMA6_COUNT 0xffc02818 /* MXVR Sync Data DMA6 Loop Count Register */
#define MXVR_DMA6_CURR_ADDR 0xffc0281c /* MXVR Sync Data DMA6 Current Address */
#define MXVR_DMA6_CURR_COUNT 0xffc02820 /* MXVR Sync Data DMA6 Current Loop Count */
/* MXVR DMA7 Registers */
#define MXVR_DMA7_CONFIG 0xffc02824 /* MXVR Sync Data DMA7 Config Register */
#define MXVR_DMA7_START_ADDR 0xffc02828 /* MXVR Sync Data DMA7 Start Address */
#define MXVR_DMA7_COUNT 0xffc0282c /* MXVR Sync Data DMA7 Loop Count Register */
#define MXVR_DMA7_CURR_ADDR 0xffc02830 /* MXVR Sync Data DMA7 Current Address */
#define MXVR_DMA7_CURR_COUNT 0xffc02834 /* MXVR Sync Data DMA7 Current Loop Count */
/* MXVR Asynch Packet Registers */
#define MXVR_AP_CTL 0xffc02838 /* MXVR Async Packet Control Register */
#define MXVR_APRB_START_ADDR 0xffc0283c /* MXVR Async Packet RX Buffer Start Addr Register */
#define MXVR_APRB_CURR_ADDR 0xffc02840 /* MXVR Async Packet RX Buffer Current Addr Register */
#define MXVR_APTB_START_ADDR 0xffc02844 /* MXVR Async Packet TX Buffer Start Addr Register */
#define MXVR_APTB_CURR_ADDR 0xffc02848 /* MXVR Async Packet TX Buffer Current Addr Register */
/* MXVR Control Message Registers */
#define MXVR_CM_CTL 0xffc0284c /* MXVR Control Message Control Register */
#define MXVR_CMRB_START_ADDR 0xffc02850 /* MXVR Control Message RX Buffer Start Addr Register */
#define MXVR_CMRB_CURR_ADDR 0xffc02854 /* MXVR Control Message RX Buffer Current Address */
#define MXVR_CMTB_START_ADDR 0xffc02858 /* MXVR Control Message TX Buffer Start Addr Register */
#define MXVR_CMTB_CURR_ADDR 0xffc0285c /* MXVR Control Message TX Buffer Current Address */
/* MXVR Remote Read Registers */
#define MXVR_RRDB_START_ADDR 0xffc02860 /* MXVR Remote Read Buffer Start Addr Register */
#define MXVR_RRDB_CURR_ADDR 0xffc02864 /* MXVR Remote Read Buffer Current Addr Register */
/* MXVR Pattern Data Registers */
#define MXVR_PAT_DATA_0 0xffc02868 /* MXVR Pattern Data Register 0 */
#define MXVR_PAT_EN_0 0xffc0286c /* MXVR Pattern Enable Register 0 */
#define MXVR_PAT_DATA_1 0xffc02870 /* MXVR Pattern Data Register 1 */
#define MXVR_PAT_EN_1 0xffc02874 /* MXVR Pattern Enable Register 1 */
/* MXVR Frame Counter Registers */
#define MXVR_FRAME_CNT_0 0xffc02878 /* MXVR Frame Counter 0 */
#define MXVR_FRAME_CNT_1 0xffc0287c /* MXVR Frame Counter 1 */
/* MXVR Routing Table Registers */
#define MXVR_ROUTING_0 0xffc02880 /* MXVR Routing Table Register 0 */
#define MXVR_ROUTING_1 0xffc02884 /* MXVR Routing Table Register 1 */
#define MXVR_ROUTING_2 0xffc02888 /* MXVR Routing Table Register 2 */
#define MXVR_ROUTING_3 0xffc0288c /* MXVR Routing Table Register 3 */
#define MXVR_ROUTING_4 0xffc02890 /* MXVR Routing Table Register 4 */
#define MXVR_ROUTING_5 0xffc02894 /* MXVR Routing Table Register 5 */
#define MXVR_ROUTING_6 0xffc02898 /* MXVR Routing Table Register 6 */
#define MXVR_ROUTING_7 0xffc0289c /* MXVR Routing Table Register 7 */
#define MXVR_ROUTING_8 0xffc028a0 /* MXVR Routing Table Register 8 */
#define MXVR_ROUTING_9 0xffc028a4 /* MXVR Routing Table Register 9 */
#define MXVR_ROUTING_10 0xffc028a8 /* MXVR Routing Table Register 10 */
#define MXVR_ROUTING_11 0xffc028ac /* MXVR Routing Table Register 11 */
#define MXVR_ROUTING_12 0xffc028b0 /* MXVR Routing Table Register 12 */
#define MXVR_ROUTING_13 0xffc028b4 /* MXVR Routing Table Register 13 */
#define MXVR_ROUTING_14 0xffc028b8 /* MXVR Routing Table Register 14 */
/* MXVR Counter-Clock-Control Registers */
#define MXVR_BLOCK_CNT 0xffc028c0 /* MXVR Block Counter */
#define MXVR_CLK_CTL 0xffc028d0 /* MXVR Clock Control Register */
#define MXVR_CDRPLL_CTL 0xffc028d4 /* MXVR Clock/Data Recovery PLL Control Register */
#define MXVR_FMPLL_CTL 0xffc028d8 /* MXVR Frequency Multiply PLL Control Register */
#define MXVR_PIN_CTL 0xffc028dc /* MXVR Pin Control Register */
#define MXVR_SCLK_CNT 0xffc028e0 /* MXVR System Clock Counter Register */
/* CAN Controller 1 Config 1 Registers */
#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */
#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */
#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */
#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */
#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */
#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */
#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */
#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */
#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
/* CAN Controller 1 Config 2 Registers */
#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */
#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */
#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */
#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */
#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */
#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */
#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */
#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */
#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
/* CAN Controller 1 Clock/Interrupt/Counter Registers */
#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */
#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */
#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */
#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */
#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */
#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */
#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */
#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */
#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */
#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */
#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */
#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */
#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */
#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */
#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */
#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */
/* CAN Controller 1 Mailbox Acceptance Registers */
#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
/* CAN Controller 1 Mailbox Acceptance Registers */
#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
/* CAN Controller 1 Mailbox Data Registers */
#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */
#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */
#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */
#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */
#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */
#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */
#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */
#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */
#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */
#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */
#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */
#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */
#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */
#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */
#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */
#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */
#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */
#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */
#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */
#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */
#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */
#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */
#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */
#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */
#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */
#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */
#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */
#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */
#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */
#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */
#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */
#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */
#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */
#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */
#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */
#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */
#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */
#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */
#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */
#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */
#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */
#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */
#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */
#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */
#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */
#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */
#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */
#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */
#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */
#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */
#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */
#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */
#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */
#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */
#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */
#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */
#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */
#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */
#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */
#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */
#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */
#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */
#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */
#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */
#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */
#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */
#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */
#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */
#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */
#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */
#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */
#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */
#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */
#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */
#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */
#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */
#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */
#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */
#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */
#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */
#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */
#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */
#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */
#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */
#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */
#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */
#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */
#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */
#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */
#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */
#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */
#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */
#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */
#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */
#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */
#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */
#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */
#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */
#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */
#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */
#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */
#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */
#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */
#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */
#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */
#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */
#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */
#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */
#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */
#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */
#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */
#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */
#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */
#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */
#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */
#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */
#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */
#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */
#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */
#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */
#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */
#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */
#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */
#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */
#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */
#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */
#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */
#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */
/* CAN Controller 1 Mailbox Data Registers */
#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */
#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */
#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */
#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */
#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */
#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */
#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */
#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */
#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */
#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */
#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */
#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */
#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */
#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */
#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */
#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */
#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */
#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */
#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */
#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */
#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */
#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */
#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */
#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */
#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */
#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */
#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */
#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */
#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */
#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */
#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */
#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */
#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */
#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */
#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */
#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */
#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */
#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */
#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */
#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */
#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */
#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */
#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */
#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */
#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */
#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */
#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */
#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */
#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */
#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */
#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */
#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */
#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */
#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */
#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */
#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */
#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */
#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */
#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */
#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */
#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */
#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */
#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */
#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */
#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */
#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */
#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */
#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */
#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */
#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */
#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */
#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */
#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */
#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */
#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */
#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */
#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */
#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */
#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */
#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */
#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */
#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */
#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */
#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */
#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */
#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */
#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */
#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */
#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */
#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */
#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */
#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */
#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */
#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */
#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */
#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */
#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */
#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */
#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */
#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */
#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */
#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */
#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */
#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */
#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */
#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */
#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */
#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */
#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */
#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */
#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */
#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */
#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */
#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */
#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */
#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */
#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */
#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */
#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */
#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */
#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */
#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */
#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */
#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */
#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */
#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */
#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */
#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */
/* ATAPI Registers */
#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
/* SDH Registers */
#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
#define SDH_COMMAND 0xffc0390c /* SDH Command */
#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
#define SDH_STATUS 0xffc03934 /* SDH Status */
#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
#define SDH_CFG 0xffc039c8 /* SDH Configuration */
#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
/* HOST Port Registers */
#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */
#define HOST_STATUS 0xffc03a04 /* HOST Status Register */
#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */
/* USB Control Registers */
#define USB_FADDR 0xffc03c00 /* Function address register */
#define USB_POWER 0xffc03c04 /* Power management register */
#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
#define USB_FRAME 0xffc03c20 /* USB frame number */
#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
/* USB Packet Control Registers */
#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
/* USB Endpoint FIFO Registers */
#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
/* USB OTG Control Registers */
#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
/* USB Phy Control Registers */
#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
/* (APHY_CNTRL is for ADI usage only) */
#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
/* (APHY_CALIB is for ADI usage only) */
#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
/* (PHY_TEST is for ADI usage only) */
#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
/* USB Endpoint 0 Control Registers */
#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
/* USB Endpoint 1 Control Registers */
#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
/* USB Endpoint 2 Control Registers */
#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
/* USB Endpoint 3 Control Registers */
#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
/* USB Endpoint 4 Control Registers */
#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
/* USB Endpoint 5 Control Registers */
#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
/* USB Endpoint 6 Control Registers */
#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
/* USB Endpoint 7 Control Registers */
#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
/* USB Channel 0 Config Registers */
#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
/* USB Channel 1 Config Registers */
#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
/* USB Channel 2 Config Registers */
#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
/* USB Channel 3 Config Registers */
#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
/* USB Channel 4 Config Registers */
#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
/* USB Channel 5 Config Registers */
#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
/* USB Channel 6 Config Registers */
#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
/* USB Channel 7 Config Registers */
#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
/* Keypad Registers */
#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
/* Pixel Compositor (PIXC) Registers */
#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */
#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */
#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */
#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */
#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */
#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */
#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */
#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */
#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */
#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */
#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */
#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */
#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */
#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */
#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */
#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */
#define PIXC_TC 0xffc04450 /* Holds the transparent color value */
/* Handshake MDMA 0 Registers */
#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
/* Handshake MDMA 1 Registers */
#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
/* ********************************************************** */
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
/* and MULTI BIT READ MACROS */
/* ********************************************************** */
/* Bit masks for PIXC_CTL */
#define PIXC_EN 0x1 /* Pixel Compositor Enable */
#define OVR_A_EN 0x2 /* Overlay A Enable */
#define OVR_B_EN 0x4 /* Overlay B Enable */
#define IMG_FORM 0x8 /* Image Data Format */
#define OVR_FORM 0x10 /* Overlay Data Format */
#define OUT_FORM 0x20 /* Output Data Format */
#define UDS_MOD 0x40 /* Resampling Mode */
#define TC_EN 0x80 /* Transparent Color Enable */
#define IMG_STAT 0x300 /* Image FIFO Status */
#define OVR_STAT 0xc00 /* Overlay FIFO Status */
#define WM_LVL 0x3000 /* FIFO Watermark Level */
/* Bit masks for PIXC_AHSTART */
#define A_HSTART 0xfff /* Horizontal Start Coordinates */
/* Bit masks for PIXC_AHEND */
#define A_HEND 0xfff /* Horizontal End Coordinates */
/* Bit masks for PIXC_AVSTART */
#define A_VSTART 0x3ff /* Vertical Start Coordinates */
/* Bit masks for PIXC_AVEND */
#define A_VEND 0x3ff /* Vertical End Coordinates */
/* Bit masks for PIXC_ATRANSP */
#define A_TRANSP 0xf /* Transparency Value */
/* Bit masks for PIXC_BHSTART */
#define B_HSTART 0xfff /* Horizontal Start Coordinates */
/* Bit masks for PIXC_BHEND */
#define B_HEND 0xfff /* Horizontal End Coordinates */
/* Bit masks for PIXC_BVSTART */
#define B_VSTART 0x3ff /* Vertical Start Coordinates */
/* Bit masks for PIXC_BVEND */
#define B_VEND 0x3ff /* Vertical End Coordinates */
/* Bit masks for PIXC_BTRANSP */
#define B_TRANSP 0xf /* Transparency Value */
/* Bit masks for PIXC_INTRSTAT */
#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
/* Bit masks for PIXC_RYCON */
#define A11 0x3ff /* A11 in the Coefficient Matrix */
#define A12 0xffc00 /* A12 in the Coefficient Matrix */
#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
/* Bit masks for PIXC_GUCON */
#define A21 0x3ff /* A21 in the Coefficient Matrix */
#define A22 0xffc00 /* A22 in the Coefficient Matrix */
#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
/* Bit masks for PIXC_BVCON */
#define A31 0x3ff /* A31 in the Coefficient Matrix */
#define A32 0xffc00 /* A32 in the Coefficient Matrix */
#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
/* Bit masks for PIXC_CCBIAS */
#define A14 0x3ff /* A14 in the Bias Vector */
#define A24 0xffc00 /* A24 in the Bias Vector */
#define A34 0x3ff00000 /* A34 in the Bias Vector */
/* Bit masks for PIXC_TC */
#define RY_TRANS 0xff /* Transparent Color - R/Y Component */
#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
/* Bit masks for HOST_CONTROL */
#define HOST_EN 0x1 /* Host Enable */
#define HOST_END 0x2 /* Host Endianess */
#define DATA_SIZE 0x4 /* Data Size */
#define HOST_RST 0x8 /* Host Reset */
#define HRDY_OVR 0x20 /* Host Ready Override */
#define INT_MODE 0x40 /* Interrupt Mode */
#define BT_EN 0x80 /* Bus Timeout Enable */
#define EHW 0x100 /* Enable Host Write */
#define EHR 0x200 /* Enable Host Read */
#define BDR 0x400 /* Burst DMA Requests */
/* Bit masks for HOST_STATUS */
#define READY 0x1 /* DMA Ready */
#define FIFOFULL 0x2 /* FIFO Full */
#define FIFOEMPTY 0x4 /* FIFO Empty */
#define DMA_COMPLETE 0x8 /* DMA Complete */
#define HSHK 0x10 /* Host Handshake */
#define TIMEOUT 0x20 /* Host Timeout */
#define HIRQ 0x40 /* Host Interrupt Request */
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
#define DMA_DIR 0x100 /* DMA Direction */
#define BTE 0x200 /* Bus Timeout Enabled */
/* Bit masks for HOST_TIMEOUT */
#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
/* Bit masks for MXVR_CONFIG */
#define MXVREN 0x1 /* MXVR Enable */
#define MMSM 0x2 /* MXVR Master/Slave Mode Select */
#define ACTIVE 0x4 /* Active Mode */
#define SDELAY 0x8 /* Synchronous Data Delay */
#define NCMRXEN 0x10 /* Normal Control Message Receive Enable */
#define RWRRXEN 0x20 /* Remote Write Receive Enable */
#define MTXEN 0x40 /* MXVR Transmit Data Enable */
#define MTXONB 0x80 /* MXVR Phy Transmitter On */
#define EPARITY 0x100 /* Even Parity Select */
#define MSB 0x1e00 /* Master Synchronous Boundary */
#define APRXEN 0x2000 /* Asynchronous Packet Receive Enable */
#define WAKEUP 0x4000 /* Wake-Up */
#define LMECH 0x8000 /* Lock Mechanism Select */
/* Bit masks for MXVR_STATE_0 */
#define NACT 0x1 /* Network Activity */
#define SBLOCK 0x2 /* Super Block Lock */
#define FMPLLST 0xc /* Frequency Multiply PLL SM State */
#define CDRPLLST 0xe0 /* Clock/Data Recovery PLL SM State */
#define APBSY 0x100 /* Asynchronous Packet Transmit Buffer Busy */
#define APARB 0x200 /* Asynchronous Packet Arbitrating */
#define APTX 0x400 /* Asynchronous Packet Transmitting */
#define APRX 0x800 /* Receiving Asynchronous Packet */
#define CMBSY 0x1000 /* Control Message Transmit Buffer Busy */
#define CMARB 0x2000 /* Control Message Arbitrating */
#define CMTX 0x4000 /* Control Message Transmitting */
#define CMRX 0x8000 /* Receiving Control Message */
#define MRXONB 0x10000 /* MRXONB Pin State */
#define RGSIP 0x20000 /* Remote Get Source In Progress */
#define DALIP 0x40000 /* Resource Deallocate In Progress */
#define ALIP 0x80000 /* Resource Allocate In Progress */
#define RRDIP 0x100000 /* Remote Read In Progress */
#define RWRIP 0x200000 /* Remote Write In Progress */
#define FLOCK 0x400000 /* Frame Lock */
#define BLOCK 0x800000 /* Block Lock */
#define RSB 0xf000000 /* Received Synchronous Boundary */
#define DERRNUM 0xf0000000 /* DMA Error Channel Number */
/* Bit masks for MXVR_STATE_1 */
#define SRXNUMB 0xf /* Synchronous Receive FIFO Number of Bytes */
#define STXNUMB 0xf0 /* Synchronous Transmit FIFO Number of Bytes */
#define APCONT 0x100 /* Asynchronous Packet Continuation */
#define OBERRNUM 0xe00 /* DMA Out of Bounds Error Channel Number */
#define DMAACTIVE0 0x10000 /* DMA0 Active */
#define DMAACTIVE1 0x20000 /* DMA1 Active */
#define DMAACTIVE2 0x40000 /* DMA2 Active */
#define DMAACTIVE3 0x80000 /* DMA3 Active */
#define DMAACTIVE4 0x100000 /* DMA4 Active */
#define DMAACTIVE5 0x200000 /* DMA5 Active */
#define DMAACTIVE6 0x400000 /* DMA6 Active */
#define DMAACTIVE7 0x800000 /* DMA7 Active */
#define DMAPMEN0 0x1000000 /* DMA0 Pattern Matching Enabled */
#define DMAPMEN1 0x2000000 /* DMA1 Pattern Matching Enabled */
#define DMAPMEN2 0x4000000 /* DMA2 Pattern Matching Enabled */
#define DMAPMEN3 0x8000000 /* DMA3 Pattern Matching Enabled */
#define DMAPMEN4 0x10000000 /* DMA4 Pattern Matching Enabled */
#define DMAPMEN5 0x20000000 /* DMA5 Pattern Matching Enabled */
#define DMAPMEN6 0x40000000 /* DMA6 Pattern Matching Enabled */
#define DMAPMEN7 0x80000000 /* DMA7 Pattern Matching Enabled */
/* Bit masks for MXVR_INT_STAT_0 */
#define NI2A 0x1 /* Network Inactive to Active */
#define NA2I 0x2 /* Network Active to Inactive */
#define SBU2L 0x4 /* Super Block Unlock to Lock */
#define SBL2U 0x8 /* Super Block Lock to Unlock */
#define PRU 0x10 /* Position Register Updated */
#define MPRU 0x20 /* Maximum Position Register Updated */
#define DRU 0x40 /* Delay Register Updated */
#define MDRU 0x80 /* Maximum Delay Register Updated */
#define SBU 0x100 /* Synchronous Boundary Updated */
#define ATU 0x200 /* Allocation Table Updated */
#define FCZ0 0x400 /* Frame Counter 0 Zero */
#define FCZ1 0x800 /* Frame Counter 1 Zero */
#define PERR 0x1000 /* Parity Error */
#define MH2L 0x2000 /* MRXONB High to Low */
#define ML2H 0x4000 /* MRXONB Low to High */
#define WUP 0x8000 /* Wake-Up Preamble Received */
#define FU2L 0x10000 /* Frame Unlock to Lock */
#define FL2U 0x20000 /* Frame Lock to Unlock */
#define BU2L 0x40000 /* Block Unlock to Lock */
#define BL2U 0x80000 /* Block Lock to Unlock */
#define OBERR 0x100000 /* DMA Out of Bounds Error */
#define PFL 0x200000 /* PLL Frequency Locked */
#define SCZ 0x400000 /* System Clock Counter Zero */
#define FERR 0x800000 /* FIFO Error */
#define CMR 0x1000000 /* Control Message Received */
#define CMROF 0x2000000 /* Control Message Receive Buffer Overflow */
#define CMTS 0x4000000 /* Control Message Transmit Buffer Successfully Sent */
#define CMTC 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled */
#define RWRC 0x10000000 /* Remote Write Control Message Completed */
#define BCZ 0x20000000 /* Block Counter Zero */
#define BMERR 0x40000000 /* Biphase Mark Coding Error */
#define DERR 0x80000000 /* DMA Error */
/* Bit masks for MXVR_INT_STAT_1 */
#define HDONE0 0x1 /* DMA0 Half Done */
#define DONE0 0x2 /* DMA0 Done */
#define APR 0x4 /* Asynchronous Packet Received */
#define APROF 0x8 /* Asynchronous Packet Receive Buffer Overflow */
#define HDONE1 0x10 /* DMA1 Half Done */
#define DONE1 0x20 /* DMA1 Done */
#define APTS 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent */
#define APTC 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled */
#define HDONE2 0x100 /* DMA2 Half Done */
#define DONE2 0x200 /* DMA2 Done */
#define APRCE 0x400 /* Asynchronous Packet Receive CRC Error */
#define APRPE 0x800 /* Asynchronous Packet Receive Packet Error */
#define HDONE3 0x1000 /* DMA3 Half Done */
#define DONE3 0x2000 /* DMA3 Done */
#define HDONE4 0x10000 /* DMA4 Half Done */
#define DONE4 0x20000 /* DMA4 Done */
#define HDONE5 0x100000 /* DMA5 Half Done */
#define DONE5 0x200000 /* DMA5 Done */
#define HDONE6 0x1000000 /* DMA6 Half Done */
#define DONE6 0x2000000 /* DMA6 Done */
#define HDONE7 0x10000000 /* DMA7 Half Done */
#define DONE7 0x20000000 /* DMA7 Done */
/* Bit masks for MXVR_INT_EN_0 */
#define NI2AEN 0x1 /* Network Inactive to Active Interrupt Enable */
#define NA2IEN 0x2 /* Network Active to Inactive Interrupt Enable */
#define SBU2LEN 0x4 /* Super Block Unlock to Lock Interrupt Enable */
#define SBL2UEN 0x8 /* Super Block Lock to Unlock Interrupt Enable */
#define PRUEN 0x10 /* Position Register Updated Interrupt Enable */
#define MPRUEN 0x20 /* Maximum Position Register Updated Interrupt Enable */
#define DRUEN 0x40 /* Delay Register Updated Interrupt Enable */
#define MDRUEN 0x80 /* Maximum Delay Register Updated Interrupt Enable */
#define SBUEN 0x100 /* Synchronous Boundary Updated Interrupt Enable */
#define ATUEN 0x200 /* Allocation Table Updated Interrupt Enable */
#define FCZ0EN 0x400 /* Frame Counter 0 Zero Interrupt Enable */
#define FCZ1EN 0x800 /* Frame Counter 1 Zero Interrupt Enable */
#define PERREN 0x1000 /* Parity Error Interrupt Enable */
#define MH2LEN 0x2000 /* MRXONB High to Low Interrupt Enable */
#define ML2HEN 0x4000 /* MRXONB Low to High Interrupt Enable */
#define WUPEN 0x8000 /* Wake-Up Preamble Received Interrupt Enable */
#define FU2LEN 0x10000 /* Frame Unlock to Lock Interrupt Enable */
#define FL2UEN 0x20000 /* Frame Lock to Unlock Interrupt Enable */
#define BU2LEN 0x40000 /* Block Unlock to Lock Interrupt Enable */
#define BL2UEN 0x80000 /* Block Lock to Unlock Interrupt Enable */
#define OBERREN 0x100000 /* DMA Out of Bounds Error Interrupt Enable */
#define PFLEN 0x200000 /* PLL Frequency Locked Interrupt Enable */
#define SCZEN 0x400000 /* System Clock Counter Zero Interrupt Enable */
#define FERREN 0x800000 /* FIFO Error Interrupt Enable */
#define CMREN 0x1000000 /* Control Message Received Interrupt Enable */
#define CMROFEN 0x2000000 /* Control Message Receive Buffer Overflow Interrupt Enable */
#define CMTSEN 0x4000000 /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */
#define CMTCEN 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */
#define RWRCEN 0x10000000 /* Remote Write Control Message Completed Interrupt Enable */
#define BCZEN 0x20000000 /* Block Counter Zero Interrupt Enable */
#define BMERREN 0x40000000 /* Biphase Mark Coding Error Interrupt Enable */
#define DERREN 0x80000000 /* DMA Error Interrupt Enable */
/* Bit masks for MXVR_INT_EN_1 */
#define HDONEEN0 0x1 /* DMA0 Half Done Interrupt Enable */
#define DONEEN0 0x2 /* DMA0 Done Interrupt Enable */
#define APREN 0x4 /* Asynchronous Packet Received Interrupt Enable */
#define APROFEN 0x8 /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */
#define HDONEEN1 0x10 /* DMA1 Half Done Interrupt Enable */
#define DONEEN1 0x20 /* DMA1 Done Interrupt Enable */
#define APTSEN 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */
#define APTCEN 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */
#define HDONEEN2 0x100 /* DMA2 Half Done Interrupt Enable */
#define DONEEN2 0x200 /* DMA2 Done Interrupt Enable */
#define APRCEEN 0x400 /* Asynchronous Packet Receive CRC Error Interrupt Enable */
#define APRPEEN 0x800 /* Asynchronous Packet Receive Packet Error Interrupt Enable */
#define HDONEEN3 0x1000 /* DMA3 Half Done Interrupt Enable */
#define DONEEN3 0x2000 /* DMA3 Done Interrupt Enable */
#define HDONEEN4 0x10000 /* DMA4 Half Done Interrupt Enable */
#define DONEEN4 0x20000 /* DMA4 Done Interrupt Enable */
#define HDONEEN5 0x100000 /* DMA5 Half Done Interrupt Enable */
#define DONEEN5 0x200000 /* DMA5 Done Interrupt Enable */
#define HDONEEN6 0x1000000 /* DMA6 Half Done Interrupt Enable */
#define DONEEN6 0x2000000 /* DMA6 Done Interrupt Enable */
#define HDONEEN7 0x10000000 /* DMA7 Half Done Interrupt Enable */
#define DONEEN7 0x20000000 /* DMA7 Done Interrupt Enable */
/* Bit masks for MXVR_POSITION */
#define POSITION 0x3f /* Node Position */
#define PVALID 0x8000 /* Node Position Valid */
/* Bit masks for MXVR_MAX_POSITION */
#define MPOSITION 0x3f /* Maximum Node Position */
#define MPVALID 0x8000 /* Maximum Node Position Valid */
/* Bit masks for MXVR_DELAY */
#define DELAY 0x3f /* Node Frame Delay */
#define DVALID 0x8000 /* Node Frame Delay Valid */
/* Bit masks for MXVR_MAX_DELAY */
#define MDELAY 0x3f /* Maximum Node Frame Delay */
#define MDVALID 0x8000 /* Maximum Node Frame Delay Valid */
/* Bit masks for MXVR_LADDR */
#define LADDR 0xffff /* Logical Address */
#define LVALID 0x80000000 /* Logical Address Valid */
/* Bit masks for MXVR_GADDR */
#define GADDRL 0xff /* Group Address Lower Byte */
#define GVALID 0x8000 /* Group Address Valid */
/* Bit masks for MXVR_AADDR */
#define AADDR 0xffff /* Alternate Address */
#define AVALID 0x80000000 /* Alternate Address Valid */
/* Bit masks for MXVR_ALLOC_0 */
#define CL0 0x7f /* Channel 0 Connection Label */
#define CIU0 0x80 /* Channel 0 In Use */
#define CL1 0x7f00 /* Channel 0 Connection Label */
#define CIU1 0x8000 /* Channel 0 In Use */
#define CL2 0x7f0000 /* Channel 0 Connection Label */
#define CIU2 0x800000 /* Channel 0 In Use */
#define CL3 0x7f000000 /* Channel 0 Connection Label */
#define CIU3 0x80000000 /* Channel 0 In Use */
/* Bit masks for MXVR_ALLOC_1 */
#define CL4 0x7f /* Channel 4 Connection Label */
#define CIU4 0x80 /* Channel 4 In Use */
#define CL5 0x7f00 /* Channel 5 Connection Label */
#define CIU5 0x8000 /* Channel 5 In Use */
#define CL6 0x7f0000 /* Channel 6 Connection Label */
#define CIU6 0x800000 /* Channel 6 In Use */
#define CL7 0x7f000000 /* Channel 7 Connection Label */
#define CIU7 0x80000000 /* Channel 7 In Use */
/* Bit masks for MXVR_ALLOC_2 */
#define CL8 0x7f /* Channel 8 Connection Label */
#define CIU8 0x80 /* Channel 8 In Use */
#define CL9 0x7f00 /* Channel 9 Connection Label */
#define CIU9 0x8000 /* Channel 9 In Use */
#define CL10 0x7f0000 /* Channel 10 Connection Label */
#define CIU10 0x800000 /* Channel 10 In Use */
#define CL11 0x7f000000 /* Channel 11 Connection Label */
#define CIU11 0x80000000 /* Channel 11 In Use */
/* Bit masks for MXVR_ALLOC_3 */
#define CL12 0x7f /* Channel 12 Connection Label */
#define CIU12 0x80 /* Channel 12 In Use */
#define CL13 0x7f00 /* Channel 13 Connection Label */
#define CIU13 0x8000 /* Channel 13 In Use */
#define CL14 0x7f0000 /* Channel 14 Connection Label */
#define CIU14 0x800000 /* Channel 14 In Use */
#define CL15 0x7f000000 /* Channel 15 Connection Label */
#define CIU15 0x80000000 /* Channel 15 In Use */
/* Bit masks for MXVR_ALLOC_4 */
#define CL16 0x7f /* Channel 16 Connection Label */
#define CIU16 0x80 /* Channel 16 In Use */
#define CL17 0x7f00 /* Channel 17 Connection Label */
#define CIU17 0x8000 /* Channel 17 In Use */
#define CL18 0x7f0000 /* Channel 18 Connection Label */
#define CIU18 0x800000 /* Channel 18 In Use */
#define CL19 0x7f000000 /* Channel 19 Connection Label */
#define CIU19 0x80000000 /* Channel 19 In Use */
/* Bit masks for MXVR_ALLOC_5 */
#define CL20 0x7f /* Channel 20 Connection Label */
#define CIU20 0x80 /* Channel 20 In Use */
#define CL21 0x7f00 /* Channel 21 Connection Label */
#define CIU21 0x8000 /* Channel 21 In Use */
#define CL22 0x7f0000 /* Channel 22 Connection Label */
#define CIU22 0x800000 /* Channel 22 In Use */
#define CL23 0x7f000000 /* Channel 23 Connection Label */
#define CIU23 0x80000000 /* Channel 23 In Use */
/* Bit masks for MXVR_ALLOC_6 */
#define CL24 0x7f /* Channel 24 Connection Label */
#define CIU24 0x80 /* Channel 24 In Use */
#define CL25 0x7f00 /* Channel 25 Connection Label */
#define CIU25 0x8000 /* Channel 25 In Use */
#define CL26 0x7f0000 /* Channel 26 Connection Label */
#define CIU26 0x800000 /* Channel 26 In Use */
#define CL27 0x7f000000 /* Channel 27 Connection Label */
#define CIU27 0x80000000 /* Channel 27 In Use */
/* Bit masks for MXVR_ALLOC_7 */
#define CL28 0x7f /* Channel 28 Connection Label */
#define CIU28 0x80 /* Channel 28 In Use */
#define CL29 0x7f00 /* Channel 29 Connection Label */
#define CIU29 0x8000 /* Channel 29 In Use */
#define CL30 0x7f0000 /* Channel 30 Connection Label */
#define CIU30 0x800000 /* Channel 30 In Use */
#define CL31 0x7f000000 /* Channel 31 Connection Label */
#define CIU31 0x80000000 /* Channel 31 In Use */
/* Bit masks for MXVR_ALLOC_8 */
#define CL32 0x7f /* Channel 32 Connection Label */
#define CIU32 0x80 /* Channel 32 In Use */
#define CL33 0x7f00 /* Channel 33 Connection Label */
#define CIU33 0x8000 /* Channel 33 In Use */
#define CL34 0x7f0000 /* Channel 34 Connection Label */
#define CIU34 0x800000 /* Channel 34 In Use */
#define CL35 0x7f000000 /* Channel 35 Connection Label */
#define CIU35 0x80000000 /* Channel 35 In Use */
/* Bit masks for MXVR_ALLOC_9 */
#define CL36 0x7f /* Channel 36 Connection Label */
#define CIU36 0x80 /* Channel 36 In Use */
#define CL37 0x7f00 /* Channel 37 Connection Label */
#define CIU37 0x8000 /* Channel 37 In Use */
#define CL38 0x7f0000 /* Channel 38 Connection Label */
#define CIU38 0x800000 /* Channel 38 In Use */
#define CL39 0x7f000000 /* Channel 39 Connection Label */
#define CIU39 0x80000000 /* Channel 39 In Use */
/* Bit masks for MXVR_ALLOC_10 */
#define CL40 0x7f /* Channel 40 Connection Label */
#define CIU40 0x80 /* Channel 40 In Use */
#define CL41 0x7f00 /* Channel 41 Connection Label */
#define CIU41 0x8000 /* Channel 41 In Use */
#define CL42 0x7f0000 /* Channel 42 Connection Label */
#define CIU42 0x800000 /* Channel 42 In Use */
#define CL43 0x7f000000 /* Channel 43 Connection Label */
#define CIU43 0x80000000 /* Channel 43 In Use */
/* Bit masks for MXVR_ALLOC_11 */
#define CL44 0x7f /* Channel 44 Connection Label */
#define CIU44 0x80 /* Channel 44 In Use */
#define CL45 0x7f00 /* Channel 45 Connection Label */
#define CIU45 0x8000 /* Channel 45 In Use */
#define CL46 0x7f0000 /* Channel 46 Connection Label */
#define CIU46 0x800000 /* Channel 46 In Use */
#define CL47 0x7f000000 /* Channel 47 Connection Label */
#define CIU47 0x80000000 /* Channel 47 In Use */
/* Bit masks for MXVR_ALLOC_12 */
#define CL48 0x7f /* Channel 48 Connection Label */
#define CIU48 0x80 /* Channel 48 In Use */
#define CL49 0x7f00 /* Channel 49 Connection Label */
#define CIU49 0x8000 /* Channel 49 In Use */
#define CL50 0x7f0000 /* Channel 50 Connection Label */
#define CIU50 0x800000 /* Channel 50 In Use */
#define CL51 0x7f000000 /* Channel 51 Connection Label */
#define CIU51 0x80000000 /* Channel 51 In Use */
/* Bit masks for MXVR_ALLOC_13 */
#define CL52 0x7f /* Channel 52 Connection Label */
#define CIU52 0x80 /* Channel 52 In Use */
#define CL53 0x7f00 /* Channel 53 Connection Label */
#define CIU53 0x8000 /* Channel 53 In Use */
#define CL54 0x7f0000 /* Channel 54 Connection Label */
#define CIU54 0x800000 /* Channel 54 In Use */
#define CL55 0x7f000000 /* Channel 55 Connection Label */
#define CIU55 0x80000000 /* Channel 55 In Use */
/* Bit masks for MXVR_ALLOC_14 */
#define CL56 0x7f /* Channel 56 Connection Label */
#define CIU56 0x80 /* Channel 56 In Use */
#define CL57 0x7f00 /* Channel 57 Connection Label */
#define CIU57 0x8000 /* Channel 57 In Use */
#define CL58 0x7f0000 /* Channel 58 Connection Label */
#define CIU58 0x800000 /* Channel 58 In Use */
#define CL59 0x7f000000 /* Channel 59 Connection Label */
#define CIU59 0x80000000 /* Channel 59 In Use */
/* MXVR_SYNC_LCHAN_0 Masks */
#define LCHANPC0 0x0000000Flu
#define LCHANPC1 0x000000F0lu
#define LCHANPC2 0x00000F00lu
#define LCHANPC3 0x0000F000lu
#define LCHANPC4 0x000F0000lu
#define LCHANPC5 0x00F00000lu
#define LCHANPC6 0x0F000000lu
#define LCHANPC7 0xF0000000lu
/* MXVR_SYNC_LCHAN_1 Masks */
#define LCHANPC8 0x0000000Flu
#define LCHANPC9 0x000000F0lu
#define LCHANPC10 0x00000F00lu
#define LCHANPC11 0x0000F000lu
#define LCHANPC12 0x000F0000lu
#define LCHANPC13 0x00F00000lu
#define LCHANPC14 0x0F000000lu
#define LCHANPC15 0xF0000000lu
/* MXVR_SYNC_LCHAN_2 Masks */
#define LCHANPC16 0x0000000Flu
#define LCHANPC17 0x000000F0lu
#define LCHANPC18 0x00000F00lu
#define LCHANPC19 0x0000F000lu
#define LCHANPC20 0x000F0000lu
#define LCHANPC21 0x00F00000lu
#define LCHANPC22 0x0F000000lu
#define LCHANPC23 0xF0000000lu
/* MXVR_SYNC_LCHAN_3 Masks */
#define LCHANPC24 0x0000000Flu
#define LCHANPC25 0x000000F0lu
#define LCHANPC26 0x00000F00lu
#define LCHANPC27 0x0000F000lu
#define LCHANPC28 0x000F0000lu
#define LCHANPC29 0x00F00000lu
#define LCHANPC30 0x0F000000lu
#define LCHANPC31 0xF0000000lu
/* MXVR_SYNC_LCHAN_4 Masks */
#define LCHANPC32 0x0000000Flu
#define LCHANPC33 0x000000F0lu
#define LCHANPC34 0x00000F00lu
#define LCHANPC35 0x0000F000lu
#define LCHANPC36 0x000F0000lu
#define LCHANPC37 0x00F00000lu
#define LCHANPC38 0x0F000000lu
#define LCHANPC39 0xF0000000lu
/* MXVR_SYNC_LCHAN_5 Masks */
#define LCHANPC40 0x0000000Flu
#define LCHANPC41 0x000000F0lu
#define LCHANPC42 0x00000F00lu
#define LCHANPC43 0x0000F000lu
#define LCHANPC44 0x000F0000lu
#define LCHANPC45 0x00F00000lu
#define LCHANPC46 0x0F000000lu
#define LCHANPC47 0xF0000000lu
/* MXVR_SYNC_LCHAN_6 Masks */
#define LCHANPC48 0x0000000Flu
#define LCHANPC49 0x000000F0lu
#define LCHANPC50 0x00000F00lu
#define LCHANPC51 0x0000F000lu
#define LCHANPC52 0x000F0000lu
#define LCHANPC53 0x00F00000lu
#define LCHANPC54 0x0F000000lu
#define LCHANPC55 0xF0000000lu
/* MXVR_SYNC_LCHAN_7 Masks */
#define LCHANPC56 0x0000000Flu
#define LCHANPC57 0x000000F0lu
#define LCHANPC58 0x00000F00lu
#define LCHANPC59 0x0000F000lu
/* Bit masks for MXVR_DMAx_CONFIG */
#define MDMAEN 0x1 /* DMA Channel Enable */
#define DD 0x2 /* DMA Channel Direction */
#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */
#define LCHAN 0x3c0 /* DMA Channel Logical Channel */
#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */
#define BY2SWAPEN 0x800 /* DMA Channel Two Byte Swap Enable */
#define MFLOW 0x7000 /* DMA Channel Operation Flow */
#define FIXEDPM 0x80000 /* DMA Channel Fixed Pattern Matching Select */
#define STARTPAT 0x300000 /* DMA Channel Start Pattern Select */
#define STOPPAT 0xc00000 /* DMA Channel Stop Pattern Select */
#define COUNTPOS 0x1c000000 /* DMA Channel Count Position */
/* Bit masks for MXVR_AP_CTL */
#define STARTAP 0x1 /* Start Asynchronous Packet Transmission */
#define CANCELAP 0x2 /* Cancel Asynchronous Packet Transmission */
#define RESETAP 0x4 /* Reset Asynchronous Packet Arbitration */
#define APRBE0 0x4000 /* Asynchronous Packet Receive Buffer Entry 0 */
#define APRBE1 0x8000 /* Asynchronous Packet Receive Buffer Entry 1 */
/* Bit masks for MXVR_APRB_START_ADDR */
#define MXVR_APRB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */
/* Bit masks for MXVR_APRB_CURR_ADDR */
#define MXVR_APRB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
/* Bit masks for MXVR_APTB_START_ADDR */
#define MXVR_APTB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */
/* Bit masks for MXVR_APTB_CURR_ADDR */
#define MXVR_APTB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
/* Bit masks for MXVR_CM_CTL */
#define STARTCM 0x1 /* Start Control Message Transmission */
#define CANCELCM 0x2 /* Cancel Control Message Transmission */
#define CMRBE0 0x10000 /* Control Message Receive Buffer Entry 0 */
#define CMRBE1 0x20000 /* Control Message Receive Buffer Entry 1 */
#define CMRBE2 0x40000 /* Control Message Receive Buffer Entry 2 */
#define CMRBE3 0x80000 /* Control Message Receive Buffer Entry 3 */
#define CMRBE4 0x100000 /* Control Message Receive Buffer Entry 4 */
#define CMRBE5 0x200000 /* Control Message Receive Buffer Entry 5 */
#define CMRBE6 0x400000 /* Control Message Receive Buffer Entry 6 */
#define CMRBE7 0x800000 /* Control Message Receive Buffer Entry 7 */
#define CMRBE8 0x1000000 /* Control Message Receive Buffer Entry 8 */
#define CMRBE9 0x2000000 /* Control Message Receive Buffer Entry 9 */
#define CMRBE10 0x4000000 /* Control Message Receive Buffer Entry 10 */
#define CMRBE11 0x8000000 /* Control Message Receive Buffer Entry 11 */
#define CMRBE12 0x10000000 /* Control Message Receive Buffer Entry 12 */
#define CMRBE13 0x20000000 /* Control Message Receive Buffer Entry 13 */
#define CMRBE14 0x40000000 /* Control Message Receive Buffer Entry 14 */
#define CMRBE15 0x80000000 /* Control Message Receive Buffer Entry 15 */
/* Bit masks for MXVR_CMRB_START_ADDR */
#define MXVR_CMRB_START_ADDR_MASK 0x1fffffe /* Control Message Receive Buffer Start Address */
/* Bit masks for MXVR_CMRB_CURR_ADDR */
#define MXVR_CMRB_CURR_ADDR_MASK 0xffffffff /* Control Message Receive Buffer Current Address */
/* Bit masks for MXVR_CMTB_START_ADDR */
#define MXVR_CMTB_START_ADDR_MASK 0x1fffffe /* Control Message Transmit Buffer Start Address */
/* Bit masks for MXVR_CMTB_CURR_ADDR */
#define MXVR_CMTB_CURR_ADDR_MASK 0xffffffff /* Control Message Transmit Buffer Current Address */
/* Bit masks for MXVR_RRDB_START_ADDR */
#define MXVR_RRDB_START_ADDR_MASK 0x1fffffe /* Remote Read Buffer Start Address */
/* Bit masks for MXVR_RRDB_CURR_ADDR */
#define MXVR_RRDB_CURR_ADDR_MASK 0xffffffff /* Remote Read Buffer Current Address */
/* Bit masks for MXVR_PAT_DATAx */
#define MATCH_DATA_0 0xff /* Pattern Match Data Byte 0 */
#define MATCH_DATA_1 0xff00 /* Pattern Match Data Byte 1 */
#define MATCH_DATA_2 0xff0000 /* Pattern Match Data Byte 2 */
#define MATCH_DATA_3 0xff000000 /* Pattern Match Data Byte 3 */
/* Bit masks for MXVR_PAT_EN_0 */
#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */
#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */
#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */
#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */
#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */
#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */
#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */
#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */
#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */
#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */
#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */
#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */
#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */
#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */
#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */
#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */
#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */
#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */
#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */
#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */
#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */
#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */
#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */
#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */
#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */
#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */
#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */
#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */
#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
/* Bit masks for MXVR_PAT_EN_1 */
#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */
#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */
#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */
#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */
#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */
#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */
#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */
#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */
#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */
#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */
#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */
#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */
#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */
#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */
#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */
#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */
#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */
#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */
#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */
#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */
#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */
#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */
#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */
#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */
#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */
#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */
#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */
#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */
#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
/* Bit masks for MXVR_FRAME_CNT_0 */
#define FCNT 0xffff /* Frame Count */
/* Bit masks for MXVR_FRAME_CNT_1 */
#define FCNT 0xffff /* Frame Count */
/* Bit masks for MXVR_ROUTING_0 */
#define TX_CH0 0x3f /* Transmit Channel 0 */
#define MUTE_CH0 0x80 /* Mute Channel 0 */
#define TX_CH1 0x3f00 /* Transmit Channel 0 */
#define MUTE_CH1 0x8000 /* Mute Channel 0 */
#define TX_CH2 0x3f0000 /* Transmit Channel 0 */
#define MUTE_CH2 0x800000 /* Mute Channel 0 */
#define TX_CH3 0x3f000000 /* Transmit Channel 0 */
#define MUTE_CH3 0x80000000 /* Mute Channel 0 */
/* Bit masks for MXVR_ROUTING_1 */
#define TX_CH4 0x3f /* Transmit Channel 4 */
#define MUTE_CH4 0x80 /* Mute Channel 4 */
#define TX_CH5 0x3f00 /* Transmit Channel 5 */
#define MUTE_CH5 0x8000 /* Mute Channel 5 */
#define TX_CH6 0x3f0000 /* Transmit Channel 6 */
#define MUTE_CH6 0x800000 /* Mute Channel 6 */
#define TX_CH7 0x3f000000 /* Transmit Channel 7 */
#define MUTE_CH7 0x80000000 /* Mute Channel 7 */
/* Bit masks for MXVR_ROUTING_2 */
#define TX_CH8 0x3f /* Transmit Channel 8 */
#define MUTE_CH8 0x80 /* Mute Channel 8 */
#define TX_CH9 0x3f00 /* Transmit Channel 9 */
#define MUTE_CH9 0x8000 /* Mute Channel 9 */
#define TX_CH10 0x3f0000 /* Transmit Channel 10 */
#define MUTE_CH10 0x800000 /* Mute Channel 10 */
#define TX_CH11 0x3f000000 /* Transmit Channel 11 */
#define MUTE_CH11 0x80000000 /* Mute Channel 11 */
/* Bit masks for MXVR_ROUTING_3 */
#define TX_CH12 0x3f /* Transmit Channel 12 */
#define MUTE_CH12 0x80 /* Mute Channel 12 */
#define TX_CH13 0x3f00 /* Transmit Channel 13 */
#define MUTE_CH13 0x8000 /* Mute Channel 13 */
#define TX_CH14 0x3f0000 /* Transmit Channel 14 */
#define MUTE_CH14 0x800000 /* Mute Channel 14 */
#define TX_CH15 0x3f000000 /* Transmit Channel 15 */
#define MUTE_CH15 0x80000000 /* Mute Channel 15 */
/* Bit masks for MXVR_ROUTING_4 */
#define TX_CH16 0x3f /* Transmit Channel 16 */
#define MUTE_CH16 0x80 /* Mute Channel 16 */
#define TX_CH17 0x3f00 /* Transmit Channel 17 */
#define MUTE_CH17 0x8000 /* Mute Channel 17 */
#define TX_CH18 0x3f0000 /* Transmit Channel 18 */
#define MUTE_CH18 0x800000 /* Mute Channel 18 */
#define TX_CH19 0x3f000000 /* Transmit Channel 19 */
#define MUTE_CH19 0x80000000 /* Mute Channel 19 */
/* Bit masks for MXVR_ROUTING_5 */
#define TX_CH20 0x3f /* Transmit Channel 20 */
#define MUTE_CH20 0x80 /* Mute Channel 20 */
#define TX_CH21 0x3f00 /* Transmit Channel 21 */
#define MUTE_CH21 0x8000 /* Mute Channel 21 */
#define TX_CH22 0x3f0000 /* Transmit Channel 22 */
#define MUTE_CH22 0x800000 /* Mute Channel 22 */
#define TX_CH23 0x3f000000 /* Transmit Channel 23 */
#define MUTE_CH23 0x80000000 /* Mute Channel 23 */
/* Bit masks for MXVR_ROUTING_6 */
#define TX_CH24 0x3f /* Transmit Channel 24 */
#define MUTE_CH24 0x80 /* Mute Channel 24 */
#define TX_CH25 0x3f00 /* Transmit Channel 25 */
#define MUTE_CH25 0x8000 /* Mute Channel 25 */
#define TX_CH26 0x3f0000 /* Transmit Channel 26 */
#define MUTE_CH26 0x800000 /* Mute Channel 26 */
#define TX_CH27 0x3f000000 /* Transmit Channel 27 */
#define MUTE_CH27 0x80000000 /* Mute Channel 27 */
/* Bit masks for MXVR_ROUTING_7 */
#define TX_CH28 0x3f /* Transmit Channel 28 */
#define MUTE_CH28 0x80 /* Mute Channel 28 */
#define TX_CH29 0x3f00 /* Transmit Channel 29 */
#define MUTE_CH29 0x8000 /* Mute Channel 29 */
#define TX_CH30 0x3f0000 /* Transmit Channel 30 */
#define MUTE_CH30 0x800000 /* Mute Channel 30 */
#define TX_CH31 0x3f000000 /* Transmit Channel 31 */
#define MUTE_CH31 0x80000000 /* Mute Channel 31 */
/* Bit masks for MXVR_ROUTING_8 */
#define TX_CH32 0x3f /* Transmit Channel 32 */
#define MUTE_CH32 0x80 /* Mute Channel 32 */
#define TX_CH33 0x3f00 /* Transmit Channel 33 */
#define MUTE_CH33 0x8000 /* Mute Channel 33 */
#define TX_CH34 0x3f0000 /* Transmit Channel 34 */
#define MUTE_CH34 0x800000 /* Mute Channel 34 */
#define TX_CH35 0x3f000000 /* Transmit Channel 35 */
#define MUTE_CH35 0x80000000 /* Mute Channel 35 */
/* Bit masks for MXVR_ROUTING_9 */
#define TX_CH36 0x3f /* Transmit Channel 36 */
#define MUTE_CH36 0x80 /* Mute Channel 36 */
#define TX_CH37 0x3f00 /* Transmit Channel 37 */
#define MUTE_CH37 0x8000 /* Mute Channel 37 */
#define TX_CH38 0x3f0000 /* Transmit Channel 38 */
#define MUTE_CH38 0x800000 /* Mute Channel 38 */
#define TX_CH39 0x3f000000 /* Transmit Channel 39 */
#define MUTE_CH39 0x80000000 /* Mute Channel 39 */
/* Bit masks for MXVR_ROUTING_10 */
#define TX_CH40 0x3f /* Transmit Channel 40 */
#define MUTE_CH40 0x80 /* Mute Channel 40 */
#define TX_CH41 0x3f00 /* Transmit Channel 41 */
#define MUTE_CH41 0x8000 /* Mute Channel 41 */
#define TX_CH42 0x3f0000 /* Transmit Channel 42 */
#define MUTE_CH42 0x800000 /* Mute Channel 42 */
#define TX_CH43 0x3f000000 /* Transmit Channel 43 */
#define MUTE_CH43 0x80000000 /* Mute Channel 43 */
/* Bit masks for MXVR_ROUTING_11 */
#define TX_CH44 0x3f /* Transmit Channel 44 */
#define MUTE_CH44 0x80 /* Mute Channel 44 */
#define TX_CH45 0x3f00 /* Transmit Channel 45 */
#define MUTE_CH45 0x8000 /* Mute Channel 45 */
#define TX_CH46 0x3f0000 /* Transmit Channel 46 */
#define MUTE_CH46 0x800000 /* Mute Channel 46 */
#define TX_CH47 0x3f000000 /* Transmit Channel 47 */
#define MUTE_CH47 0x80000000 /* Mute Channel 47 */
/* Bit masks for MXVR_ROUTING_12 */
#define TX_CH48 0x3f /* Transmit Channel 48 */
#define MUTE_CH48 0x80 /* Mute Channel 48 */
#define TX_CH49 0x3f00 /* Transmit Channel 49 */
#define MUTE_CH49 0x8000 /* Mute Channel 49 */
#define TX_CH50 0x3f0000 /* Transmit Channel 50 */
#define MUTE_CH50 0x800000 /* Mute Channel 50 */
#define TX_CH51 0x3f000000 /* Transmit Channel 51 */
#define MUTE_CH51 0x80000000 /* Mute Channel 51 */
/* Bit masks for MXVR_ROUTING_13 */
#define TX_CH52 0x3f /* Transmit Channel 52 */
#define MUTE_CH52 0x80 /* Mute Channel 52 */
#define TX_CH53 0x3f00 /* Transmit Channel 53 */
#define MUTE_CH53 0x8000 /* Mute Channel 53 */
#define TX_CH54 0x3f0000 /* Transmit Channel 54 */
#define MUTE_CH54 0x800000 /* Mute Channel 54 */
#define TX_CH55 0x3f000000 /* Transmit Channel 55 */
#define MUTE_CH55 0x80000000 /* Mute Channel 55 */
/* Bit masks for MXVR_ROUTING_14 */
#define TX_CH56 0x3f /* Transmit Channel 56 */
#define MUTE_CH56 0x80 /* Mute Channel 56 */
#define TX_CH57 0x3f00 /* Transmit Channel 57 */
#define MUTE_CH57 0x8000 /* Mute Channel 57 */
#define TX_CH58 0x3f0000 /* Transmit Channel 58 */
#define MUTE_CH58 0x800000 /* Mute Channel 58 */
#define TX_CH59 0x3f000000 /* Transmit Channel 59 */
#define MUTE_CH59 0x80000000 /* Mute Channel 59 */
/* Bit masks for MXVR_BLOCK_CNT */
#define BCNT 0xffff /* Block Count */
/* Bit masks for MXVR_CLK_CTL */
#define MXTALCEN 0x1 /* MXVR Crystal Oscillator Clock Enable */
#define MXTALFEN 0x2 /* MXVR Crystal Oscillator Feedback Enable */
#define MXTALMUL 0x30 /* MXVR Crystal Multiplier */
#define CLKX3SEL 0x80 /* Clock Generation Source Select */
#define MMCLKEN 0x100 /* Master Clock Enable */
#define MMCLKMUL 0x1e00 /* Master Clock Multiplication Factor */
#define PLLSMPS 0xe000 /* MXVR PLL State Machine Prescaler */
#define MBCLKEN 0x10000 /* Bit Clock Enable */
#define MBCLKDIV 0x1e0000 /* Bit Clock Divide Factor */
#define INVRX 0x800000 /* Invert Receive Data */
#define MFSEN 0x1000000 /* Frame Sync Enable */
#define MFSDIV 0x1e000000 /* Frame Sync Divide Factor */
#define MFSSEL 0x60000000 /* Frame Sync Select */
#define MFSSYNC 0x80000000 /* Frame Sync Synchronization Select */
/* Bit masks for MXVR_CDRPLL_CTL */
#define CDRSMEN 0x1 /* MXVR CDRPLL State Machine Enable */
#define CDRRSTB 0x2 /* MXVR CDRPLL Reset */
#define CDRSVCO 0x4 /* MXVR CDRPLL Start VCO */
#define CDRMODE 0x8 /* MXVR CDRPLL CDR Mode Select */
#define CDRSCNT 0x3f0 /* MXVR CDRPLL Start Counter */
#define CDRLCNT 0xfc00 /* MXVR CDRPLL Lock Counter */
#define CDRSHPSEL 0x3f0000 /* MXVR CDRPLL Shaper Select */
#define CDRSHPEN 0x800000 /* MXVR CDRPLL Shaper Enable */
#define CDRCPSEL 0xff000000 /* MXVR CDRPLL Charge Pump Current Select */
/* Bit masks for MXVR_FMPLL_CTL */
#define FMSMEN 0x1 /* MXVR FMPLL State Machine Enable */
#define FMRSTB 0x2 /* MXVR FMPLL Reset */
#define FMSVCO 0x4 /* MXVR FMPLL Start VCO */
#define FMSCNT 0x3f0 /* MXVR FMPLL Start Counter */
#define FMLCNT 0xfc00 /* MXVR FMPLL Lock Counter */
#define FMCPSEL 0xff000000 /* MXVR FMPLL Charge Pump Current Select */
/* Bit masks for MXVR_PIN_CTL */
#define MTXONBOD 0x1 /* MTXONB Open Drain Select */
#define MTXONBG 0x2 /* MTXONB Gates MTX Select */
#define MFSOE 0x10 /* MFS Output Enable */
#define MFSGPSEL 0x20 /* MFS General Purpose Output Select */
#define MFSGPDAT 0x40 /* MFS General Purpose Output Data */
/* Bit masks for MXVR_SCLK_CNT */
#define SCNT 0xffff /* System Clock Count */
/* Bit masks for KPAD_CTL */
#define KPAD_EN 0x1 /* Keypad Enable */
#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
#define KPAD_COLEN 0xe000 /* Column Enable Width */
/* Bit masks for KPAD_PRESCALE */
#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
/* Bit masks for KPAD_MSEL */
#define DBON_SCALE 0xff /* Debounce Scale Value */
#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
/* Bit masks for KPAD_ROWCOL */
#define KPAD_ROW 0xff /* Rows Pressed */
#define KPAD_COL 0xff00 /* Columns Pressed */
/* Bit masks for KPAD_STAT */
#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
#define KPAD_PRESSED 0x8 /* Key press current status */
/* Bit masks for KPAD_SOFTEVAL */
#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
/* Bit masks for SDH_COMMAND */
#define CMD_IDX 0x3f /* Command Index */
#define CMD_RSP 0x40 /* Response */
#define CMD_L_RSP 0x80 /* Long Response */
#define CMD_INT_E 0x100 /* Command Interrupt */
#define CMD_PEND_E 0x200 /* Command Pending */
#define CMD_E 0x400 /* Command Enable */
/* Bit masks for SDH_PWR_CTL */
#define PWR_ON 0x3 /* Power On */
#if 0
#define TBD 0x3c /* TBD */
#endif
#define SD_CMD_OD 0x40 /* Open Drain Output */
#define ROD_CTL 0x80 /* Rod Control */
/* Bit masks for SDH_CLK_CTL */
#define CLKDIV 0xff /* MC_CLK Divisor */
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
#define PWR_SV_E 0x200 /* Power Save Enable */
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
/* Bit masks for SDH_RESP_CMD */
#define RESP_CMD 0x3f /* Response Command */
/* Bit masks for SDH_DATA_CTL */
#define DTX_E 0x1 /* Data Transfer Enable */
#define DTX_DIR 0x2 /* Data Transfer Direction */
#define DTX_MODE 0x4 /* Data Transfer Mode */
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
/* Bit masks for SDH_STATUS */
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
#define CMD_TIME_OUT 0x4 /* CMD Time Out */
#define DAT_TIME_OUT 0x8 /* Data Time Out */
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
#define RX_OVERRUN 0x20 /* Receive Overrun */
#define CMD_RESP_END 0x40 /* CMD Response End */
#define CMD_SENT 0x80 /* CMD Sent */
#define DAT_END 0x100 /* Data End */
#define START_BIT_ERR 0x200 /* Start Bit Error */
#define DAT_BLK_END 0x400 /* Data Block End */
#define CMD_ACT 0x800 /* CMD Active */
#define TX_ACT 0x1000 /* Transmit Active */
#define RX_ACT 0x2000 /* Receive Active */
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
/* Bit masks for SDH_STATUS_CLR */
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
#define DAT_END_STAT 0x100 /* Data End Status */
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
/* Bit masks for SDH_MASK0 */
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
#define DAT_END_MASK 0x100 /* Data End Mask */
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
/* Bit masks for SDH_FIFO_CNT */
#define FIFO_COUNT 0x7fff /* FIFO Count */
/* Bit masks for SDH_E_STATUS */
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
#define SD_CARD_DET 0x10 /* SD Card Detect */
/* Bit masks for SDH_E_MASK */
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
#define SCD_MSK 0x40 /* Mask Card Detect */
/* Bit masks for SDH_CFG */
#define CLKS_EN 0x1 /* Clocks Enable */
#define SD4E 0x4 /* SDIO 4-Bit Enable */
#define MWE 0x8 /* Moving Window Enable */
#define SD_RST 0x10 /* SDMMC Reset */
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
/* Bit masks for SDH_RD_WAIT_EN */
#define RWR 0x1 /* Read Wait Request */
/* Bit masks for ATAPI_CONTROL */
#define PIO_START 0x1 /* Start PIO/Reg Op */
#define MULTI_START 0x2 /* Start Multi-DMA Op */
#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
#define XFER_DIR 0x8 /* Transfer Direction */
#define IORDY_EN 0x10 /* IORDY Enable */
#define FIFO_FLUSH 0x20 /* Flush FIFOs */
#define SOFT_RST 0x40 /* Soft Reset */
#define DEV_RST 0x80 /* Device Reset */
#define TFRCNT_RST 0x100 /* Trans Count Reset */
#define END_ON_TERM 0x200 /* End/Terminate Select */
#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
/* Bit masks for ATAPI_STATUS */
#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
/* Bit masks for ATAPI_DEV_ADDR */
#define DEV_ADDR 0x1f /* Device Address */
/* Bit masks for ATAPI_INT_MASK */
#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
/* Bit masks for ATAPI_INT_STATUS */
#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
/* Bit masks for ATAPI_LINE_STATUS */
#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
#define ATAPI_DASP 0x2 /* Device dasp to host line status */
#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
#define ATAPI_ADDR 0x70 /* ATAPI address line status */
#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
#define ATAPI_DIORN 0x400 /* ATAPI read line status */
#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
/* Bit masks for ATAPI_SM_STATE */
#define PIO_CSTATE 0xf /* PIO mode state machine current state */
#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
/* Bit masks for ATAPI_TERMINATE */
#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
/* Bit masks for ATAPI_REG_TIM_0 */
#define T2_REG 0xff /* End of cycle time for register access transfers */
#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
/* Bit masks for ATAPI_PIO_TIM_0 */
#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
#define T4_REG 0xf000 /* DIOW data hold */
/* Bit masks for ATAPI_PIO_TIM_1 */
#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
/* Bit masks for ATAPI_MULTI_TIM_0 */
#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
/* Bit masks for ATAPI_MULTI_TIM_1 */
#define TKW 0xff /* Selects DIOW negated pulsewidth */
#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
/* Bit masks for ATAPI_MULTI_TIM_2 */
#define TH 0xff /* Selects DIOW data hold */
#define TEOC 0xff00 /* Selects end of cycle for DMA */
/* Bit masks for ATAPI_ULTRA_TIM_0 */
#define TACK 0xff /* Selects setup and hold times for TACK */
#define TENV 0xff00 /* Selects envelope time */
/* Bit masks for ATAPI_ULTRA_TIM_1 */
#define TDVS 0xff /* Selects data valid setup time */
#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
/* Bit masks for ATAPI_ULTRA_TIM_2 */
#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
#define TMLI 0xff00 /* Selects interlock time */
/* Bit masks for ATAPI_ULTRA_TIM_3 */
#define TZAH 0xff /* Selects minimum delay required for output */
#define READY_PAUSE 0xff00 /* Selects ready to pause */
/* Bit masks for TIMER_ENABLE1 */
#define TIMEN8 0x1 /* Timer 8 Enable */
#define TIMEN9 0x2 /* Timer 9 Enable */
#define TIMEN10 0x4 /* Timer 10 Enable */
/* Bit masks for TIMER_DISABLE1 */
#define TIMDIS8 0x1 /* Timer 8 Disable */
#define TIMDIS9 0x2 /* Timer 9 Disable */
#define TIMDIS10 0x4 /* Timer 10 Disable */
/* Bit masks for TIMER_STATUS1 */
#define TIMIL8 0x1 /* Timer 8 Interrupt */
#define TIMIL9 0x2 /* Timer 9 Interrupt */
#define TIMIL10 0x4 /* Timer 10 Interrupt */
#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
/* Bit masks for USB_FADDR */
#define FUNCTION_ADDRESS 0x7f /* Function address */
/* Bit masks for USB_POWER */
#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
#define RESUME_MODE 0x4 /* DMA Mode */
#define RESET 0x8 /* Reset indicator */
#define HS_MODE 0x10 /* High Speed mode indicator */
#define HS_ENABLE 0x20 /* high Speed Enable */
#define SOFT_CONN 0x40 /* Soft connect */
#define ISO_UPDATE 0x80 /* Isochronous update */
/* Bit masks for USB_INTRTX */
#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
/* Bit masks for USB_INTRRX */
#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
/* Bit masks for USB_INTRTXE */
#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
/* Bit masks for USB_INTRRXE */
#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
/* Bit masks for USB_INTRUSB */
#define SUSPEND_B 0x1 /* Suspend indicator */
#define RESUME_B 0x2 /* Resume indicator */
#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
#define SOF_B 0x8 /* Start of frame */
#define CONN_B 0x10 /* Connection indicator */
#define DISCON_B 0x20 /* Disconnect indicator */
#define SESSION_REQ_B 0x40 /* Session Request */
#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
/* Bit masks for USB_INTRUSBE */
#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
#define RESUME_BE 0x2 /* Resume indicator int enable */
#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
#define SOF_BE 0x8 /* Start of frame int enable */
#define CONN_BE 0x10 /* Connection indicator int enable */
#define DISCON_BE 0x20 /* Disconnect indicator int enable */
#define SESSION_REQ_BE 0x40 /* Session Request int enable */
#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
/* Bit masks for USB_FRAME */
#define FRAME_NUMBER 0x7ff /* Frame number */
/* Bit masks for USB_INDEX */
#define SELECTED_ENDPOINT 0xf /* selected endpoint */
/* Bit masks for USB_GLOBAL_CTL */
#define GLOBAL_ENA 0x1 /* enables USB module */
#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
/* Bit masks for USB_OTG_DEV_CTL */
#define SESSION 0x1 /* session indicator */
#define HOST_REQ 0x2 /* Host negotiation request */
#define HOST_MODE 0x4 /* indicates USBDRC is a host */
#define VBUS0 0x8 /* Vbus level indicator[0] */
#define VBUS1 0x10 /* Vbus level indicator[1] */
#define LSDEV 0x20 /* Low-speed indicator */
#define FSDEV 0x40 /* Full or High-speed indicator */
#define B_DEVICE 0x80 /* A' or 'B' device indicator */
/* Bit masks for USB_OTG_VBUS_IRQ */
#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
/* Bit masks for USB_OTG_VBUS_MASK */
#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
/* Bit masks for USB_CSR0 */
#define RXPKTRDY 0x1 /* data packet receive indicator */
#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
#define STALL_SENT 0x4 /* STALL handshake sent */
#define DATAEND 0x8 /* Data end indicator */
#define SETUPEND 0x10 /* Setup end */
#define SENDSTALL 0x20 /* Send STALL handshake */
#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
#define SETUPPKT_H 0x8 /* send Setup token host mode */
#define ERROR_H 0x10 /* timeout error indicator host mode */
#define REQPKT_H 0x20 /* Request an IN transaction host mode */
#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
/* Bit masks for USB_COUNT0 */
#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
/* Bit masks for USB_NAKLIMIT0 */
#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
/* Bit masks for USB_TX_MAX_PACKET */
#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
/* Bit masks for USB_RX_MAX_PACKET */
#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
/* Bit masks for USB_TXCSR */
#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
#define STALL_SEND_T 0x10 /* issue a Stall handshake */
#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
#define ISO_T 0x4000 /* enable Isochronous transfers */
#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
#define ERROR_TH 0x4 /* error condition host mode */
#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
/* Bit masks for USB_TXCOUNT */
#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
/* Bit masks for USB_RXCSR */
#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
#define FIFO_FULL_R 0x2 /* FIFO not empty */
#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
#define STALL_SEND_R 0x20 /* issue a Stall handshake */
#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
#define DISNYET_R 0x1000 /* disable Nyet handshakes */
#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
#define ISO_R 0x4000 /* enable Isochronous transfers */
#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
#define REQPKT_RH 0x20 /* request an IN transaction host mode */
#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
/* Bit masks for USB_RXCOUNT */
#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
/* Bit masks for USB_TXTYPE */
#define TARGET_EP_NO_T 0xf /* EP number */
#define PROTOCOL_T 0xc /* transfer type */
/* Bit masks for USB_TXINTERVAL */
#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
/* Bit masks for USB_RXTYPE */
#define TARGET_EP_NO_R 0xf /* EP number */
#define PROTOCOL_R 0xc /* transfer type */
/* Bit masks for USB_RXINTERVAL */
#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
/* Bit masks for USB_DMA_INTERRUPT */
#define DMA0_INT 0x1 /* DMA0 pending interrupt */
#define DMA1_INT 0x2 /* DMA1 pending interrupt */
#define DMA2_INT 0x4 /* DMA2 pending interrupt */
#define DMA3_INT 0x8 /* DMA3 pending interrupt */
#define DMA4_INT 0x10 /* DMA4 pending interrupt */
#define DMA5_INT 0x20 /* DMA5 pending interrupt */
#define DMA6_INT 0x40 /* DMA6 pending interrupt */
#define DMA7_INT 0x80 /* DMA7 pending interrupt */
/* Bit masks for USB_DMAxCONTROL */
#define DMA_ENA 0x1 /* DMA enable */
#define DIRECTION 0x2 /* direction of DMA transfer */
#define MODE 0x4 /* DMA Bus error */
#define INT_ENA 0x8 /* Interrupt enable */
#define EPNUM 0xf0 /* EP number */
#define BUSERROR 0x100 /* DMA Bus error */
/* Bit masks for USB_DMAxADDRHIGH */
#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
/* Bit masks for USB_DMAxADDRLOW */
#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
/* Bit masks for USB_DMAxCOUNTHIGH */
#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
/* Bit masks for USB_DMAxCOUNTLOW */
#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
/* Bit masks for HMDMAx_CONTROL */
#define HMDMAEN 0x1 /* Handshake MDMA Enable */
#define REP 0x2 /* Handshake MDMA Request Polarity */
#define UTE 0x8 /* Urgency Threshold Enable */
#define OIE 0x10 /* Overflow Interrupt Enable */
#define BDIE 0x20 /* Block Done Interrupt Enable */
#define MBDI 0x40 /* Mask Block Done Interrupt */
#define DRQ 0x300 /* Handshake MDMA Request Type */
#define RBC 0x1000 /* Force Reload of BCOUNT */
#define PS 0x2000 /* Pin Status */
#define OI 0x4000 /* Overflow Interrupt Generated */
#define BDI 0x8000 /* Block Done Interrupt Generated */
/* ******************************************* */
/* MULTI BIT MACRO ENUMERATIONS */
/* ******************************************* */
/* ************************ */
/* MXVR Address Offsets */
/* ************************ */
/* Control Message Receive Buffer (CMRB) Address Offsets */
#define CMRB_STRIDE 0x00000016lu
#define CMRB_DST_OFFSET 0x00000000lu
#define CMRB_SRC_OFFSET 0x00000002lu
#define CMRB_DATA_OFFSET 0x00000005lu
/* Control Message Transmit Buffer (CMTB) Address Offsets */
#define CMTB_PRIO_OFFSET 0x00000000lu
#define CMTB_DST_OFFSET 0x00000002lu
#define CMTB_SRC_OFFSET 0x00000004lu
#define CMTB_TYPE_OFFSET 0x00000006lu
#define CMTB_DATA_OFFSET 0x00000007lu
#define CMTB_ANSWER_OFFSET 0x0000000Alu
#define CMTB_STAT_N_OFFSET 0x00000018lu
#define CMTB_STAT_A_OFFSET 0x00000016lu
#define CMTB_STAT_D_OFFSET 0x0000000Elu
#define CMTB_STAT_R_OFFSET 0x00000014lu
#define CMTB_STAT_W_OFFSET 0x00000014lu
#define CMTB_STAT_G_OFFSET 0x00000014lu
/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */
#define APRB_STRIDE 0x00000400lu
#define APRB_DST_OFFSET 0x00000000lu
#define APRB_LEN_OFFSET 0x00000002lu
#define APRB_SRC_OFFSET 0x00000004lu
#define APRB_DATA_OFFSET 0x00000006lu
/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */
#define APTB_PRIO_OFFSET 0x00000000lu
#define APTB_DST_OFFSET 0x00000002lu
#define APTB_LEN_OFFSET 0x00000004lu
#define APTB_SRC_OFFSET 0x00000006lu
#define APTB_DATA_OFFSET 0x00000008lu
/* Remote Read Buffer (RRDB) Address Offsets */
#define RRDB_WADDR_OFFSET 0x00000100lu
#define RRDB_WLEN_OFFSET 0x00000101lu
/* **************** */
/* MXVR Macros */
/* **************** */
/* MXVR_CONFIG Macros */
#define SET_MSB(x) ( ( (x) & 0xF ) << 9)
/* MXVR_INT_STAT_1 Macros */
#define DONEX(x) (0x00000002 << (4 * (x)))
#define HDONEX(x) (0x00000001 << (4 * (x)))
/* MXVR_INT_EN_1 Macros */
#define DONEENX(x) (0x00000002 << (4 * (x)))
#define HDONEENX(x) (0x00000001 << (4 * (x)))
/* MXVR_CDRPLL_CTL Macros */
#define SET_CDRSHPSEL(x) ( ( (x) & 0x3F ) << 16)
/* MXVR_FMPLL_CTL Macros */
#define SET_CDRCPSEL(x) ( ( (x) & 0xFF ) << 24)
#define SET_FMCPSEL(x) ( ( (x) & 0xFF ) << 24)
#endif /* _DEF_BF549_H */
Reference in New Issue View Git Blame Copy Permalink