kernel-ark/drivers/serial/cpm_uart/cpm_uart.h
Kumar Gala 32a56ebb24 [POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning
cpm_uart_init_portdesc is referenced from non-init code and thus we were
getting the following warning:

WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:cpm_uart_init_portdesc from .text between 'cpm_uart_init' (at offset 0x18020) and 'cpm_uart_drv_remove'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:44:58 -05:00

137 lines
3.3 KiB
C

/*
* linux/drivers/serial/cpm_uart.h
*
* Driver for CPM (SCC/SMC) serial ports
*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
*
* 2006 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*
*/
#ifndef CPM_UART_H
#define CPM_UART_H
#include <linux/platform_device.h>
#include <linux/fs_uart_pd.h>
#if defined(CONFIG_CPM2)
#include "cpm_uart_cpm2.h"
#elif defined(CONFIG_8xx)
#include "cpm_uart_cpm1.h"
#endif
#define SERIAL_CPM_MAJOR 204
#define SERIAL_CPM_MINOR 46
#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC)
#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING)
#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */
#define FLAG_SMC 0x00000002
#define FLAG_CONSOLE 0x00000001
#define UART_SMC1 fsid_smc1_uart
#define UART_SMC2 fsid_smc2_uart
#define UART_SCC1 fsid_scc1_uart
#define UART_SCC2 fsid_scc2_uart
#define UART_SCC3 fsid_scc3_uart
#define UART_SCC4 fsid_scc4_uart
#define UART_NR fs_uart_nr
#define RX_NUM_FIFO 4
#define RX_BUF_SIZE 32
#define TX_NUM_FIFO 4
#define TX_BUF_SIZE 32
#define SCC_WAIT_CLOSING 100
struct uart_cpm_port {
struct uart_port port;
u16 rx_nrfifos;
u16 rx_fifosize;
u16 tx_nrfifos;
u16 tx_fifosize;
smc_t *smcp;
smc_uart_t *smcup;
scc_t *sccp;
scc_uart_t *sccup;
volatile cbd_t *rx_bd_base;
volatile cbd_t *rx_cur;
volatile cbd_t *tx_bd_base;
volatile cbd_t *tx_cur;
unsigned char *tx_buf;
unsigned char *rx_buf;
u32 flags;
void (*set_lineif)(struct uart_cpm_port *);
u8 brg;
uint dp_addr;
void *mem_addr;
dma_addr_t dma_addr;
u32 mem_size;
/* helpers */
int baud;
int bits;
/* Keep track of 'odd' SMC2 wirings */
int is_portb;
/* wait on close if needed */
int wait_closing;
};
extern int cpm_uart_port_map[UART_NR];
extern int cpm_uart_nr;
extern struct uart_cpm_port cpm_uart_ports[UART_NR];
/* these are located in their respective files */
void cpm_line_cr_cmd(int line, int cmd);
int cpm_uart_init_portdesc(void);
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
void smc1_lineif(struct uart_cpm_port *pinfo);
void smc2_lineif(struct uart_cpm_port *pinfo);
void scc1_lineif(struct uart_cpm_port *pinfo);
void scc2_lineif(struct uart_cpm_port *pinfo);
void scc3_lineif(struct uart_cpm_port *pinfo);
void scc4_lineif(struct uart_cpm_port *pinfo);
/*
virtual to phys transtalion
*/
static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo)
{
int offset;
u32 val = (u32)addr;
/* sane check */
if (likely((val >= (u32)pinfo->mem_addr)) &&
(val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
offset = val - (u32)pinfo->mem_addr;
return pinfo->dma_addr+offset;
}
/* something nasty happened */
BUG();
return 0;
}
static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo)
{
int offset;
u32 val = addr;
/* sane check */
if (likely((val >= pinfo->dma_addr) &&
(val<(pinfo->dma_addr + pinfo->mem_size)))) {
offset = val - (u32)pinfo->dma_addr;
return (void*)(pinfo->mem_addr+offset);
}
/* something nasty happened */
BUG();
return 0;
}
#endif /* CPM_UART_H */