kernel-ark/arch/ppc64/kernel/pSeries_setup.c
Paul Mackerras 4267292b0f ppc64: Set up PCI tree from Open Firmware device tree
This adds code which gives us the option on ppc64 of instantiating the
PCI tree (the tree of pci_bus and pci_dev structs) from the Open
Firmware device tree rather than by probing PCI configuration space.
The OF device tree has a node for each PCI device and bridge in the
system, with properties that tell us what addresses the firmware has
configured for them and other details.

There are a couple of reasons why this is needed.  First, on systems
with a hypervisor, there is a PCI-PCI bridge per slot under the PCI
host bridges.  These PCI-PCI bridges have special isolation features
for virtualization.  We can't write to their config space, and we are
not supposed to be reading their config space either.  The firmware
tells us about the address ranges that they pass in the OF device
tree.

Secondly, on powermacs, the interrupt controller is in a PCI device
that may be behind a PCI-PCI bridge.  If we happened to take an
interrupt just at the point when the device or a bridge on the path to
it was disabled for probing, we would crash when we try to access the
interrupt controller.

I have implemented a platform-specific function which is called for
each PCI bridge (host or PCI-PCI) to say whether the code should look
in the device tree or use normal PCI probing for the devices under
that bridge.  On pSeries machines we use the device tree if we're
running under a hypervisor, otherwise we use normal probing.  On
powermacs we use normal probing for the AGP bridge, since the device
for the AGP bridge itself isn't shown in the device tree (at least on
my G5), and the device tree for everything else.

This has been tested on a dual G5 powermac, a partition on a POWER5
machine (running under the hypervisor), and a legacy iSeries
partition.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 17:17:36 +10:00

623 lines
15 KiB
C

/*
* linux/arch/ppc/kernel/setup.c
*
* Copyright (C) 1995 Linus Torvalds
* Adapted from 'alpha' version by Gary Thomas
* Modified by Cort Dougan (cort@cs.nmt.edu)
* Modified by PPC64 Team, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/*
* bootup setup stuff..
*/
#undef DEBUG
#include <linux/config.h>
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/major.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/utsname.h>
#include <linux/adb.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/irq.h>
#include <asm/time.h>
#include <asm/nvram.h>
#include <asm/plpar_wrappers.h>
#include <asm/xics.h>
#include <asm/firmware.h>
#include <asm/pmc.h>
#include "i8259.h"
#include "mpic.h"
#include "pci.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
extern void find_udbg_vterm(void);
extern void system_reset_fwnmi(void); /* from head.S */
extern void machine_check_fwnmi(void); /* from head.S */
extern void generic_find_legacy_serial_ports(u64 *physport,
unsigned int *default_speed);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
extern void pSeries_system_reset_exception(struct pt_regs *regs);
extern int pSeries_machine_check_exception(struct pt_regs *regs);
static int pseries_shared_idle(void);
static int pseries_dedicated_idle(void);
static volatile void __iomem * chrp_int_ack_special;
struct mpic *pSeries_mpic;
void pSeries_get_cpuinfo(struct seq_file *m)
{
struct device_node *root;
const char *model = "";
root = of_find_node_by_path("/");
if (root)
model = get_property(root, "model", NULL);
seq_printf(m, "machine\t\t: CHRP %s\n", model);
of_node_put(root);
}
/* Initialize firmware assisted non-maskable interrupts if
* the firmware supports this feature.
*
*/
static void __init fwnmi_init(void)
{
int ret;
int ibm_nmi_register = rtas_token("ibm,nmi-register");
if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE)
return;
ret = rtas_call(ibm_nmi_register, 2, 1, NULL,
__pa((unsigned long)system_reset_fwnmi),
__pa((unsigned long)machine_check_fwnmi));
if (ret == 0)
fwnmi_active = 1;
}
static int pSeries_irq_cascade(struct pt_regs *regs, void *data)
{
if (chrp_int_ack_special)
return readb(chrp_int_ack_special);
else
return i8259_irq(smp_processor_id());
}
static void __init pSeries_init_mpic(void)
{
unsigned int *addrp;
struct device_node *np;
int i;
/* All ISUs are setup, complete initialization */
mpic_init(pSeries_mpic);
/* Check what kind of cascade ACK we have */
if (!(np = of_find_node_by_name(NULL, "pci"))
|| !(addrp = (unsigned int *)
get_property(np, "8259-interrupt-acknowledge", NULL)))
printk(KERN_ERR "Cannot find pci to get ack address\n");
else
chrp_int_ack_special = ioremap(addrp[prom_n_addr_cells(np)-1], 1);
of_node_put(np);
/* Setup the legacy interrupts & controller */
for (i = 0; i < NUM_ISA_INTERRUPTS; i++)
irq_desc[i].handler = &i8259_pic;
i8259_init(0);
/* Hook cascade to mpic */
mpic_setup_cascade(NUM_ISA_INTERRUPTS, pSeries_irq_cascade, NULL);
}
static void __init pSeries_setup_mpic(void)
{
unsigned int *opprop;
unsigned long openpic_addr = 0;
unsigned char senses[NR_IRQS - NUM_ISA_INTERRUPTS];
struct device_node *root;
int irq_count;
/* Find the Open PIC if present */
root = of_find_node_by_path("/");
opprop = (unsigned int *) get_property(root, "platform-open-pic", NULL);
if (opprop != 0) {
int n = prom_n_addr_cells(root);
for (openpic_addr = 0; n > 0; --n)
openpic_addr = (openpic_addr << 32) + *opprop++;
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
}
of_node_put(root);
BUG_ON(openpic_addr == 0);
/* Get the sense values from OF */
prom_get_irq_senses(senses, NUM_ISA_INTERRUPTS, NR_IRQS);
/* Setup the openpic driver */
irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
pSeries_mpic = mpic_alloc(openpic_addr, MPIC_PRIMARY,
16, 16, irq_count, /* isu size, irq offset, irq count */
NR_IRQS - 4, /* ipi offset */
senses, irq_count, /* sense & sense size */
" MPIC ");
}
static void pseries_lpar_enable_pmcs(void)
{
unsigned long set, reset;
power4_enable_pmcs();
set = 1UL << 63;
reset = 0;
plpar_hcall_norets(H_PERFMON, set, reset);
/* instruct hypervisor to maintain PMCs */
if (firmware_has_feature(FW_FEATURE_SPLPAR))
get_paca()->lppaca.pmcregs_in_use = 1;
}
static void __init pSeries_setup_arch(void)
{
/* Fixup ppc_md depending on the type of interrupt controller */
if (ppc64_interrupt_controller == IC_OPEN_PIC) {
ppc_md.init_IRQ = pSeries_init_mpic;
ppc_md.get_irq = mpic_get_irq;
ppc_md.cpu_irq_down = mpic_teardown_this_cpu;
/* Allocate the mpic now, so that find_and_init_phbs() can
* fill the ISUs */
pSeries_setup_mpic();
} else {
ppc_md.init_IRQ = xics_init_IRQ;
ppc_md.get_irq = xics_get_irq;
ppc_md.cpu_irq_down = xics_teardown_cpu;
}
#ifdef CONFIG_SMP
smp_init_pSeries();
#endif
/* openpic global configuration register (64-bit format). */
/* openpic Interrupt Source Unit pointer (64-bit format). */
/* python0 facility area (mmio) (64-bit format) REAL address. */
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000;
if (ROOT_DEV == 0) {
printk("No ramdisk, default root is /dev/sda2\n");
ROOT_DEV = Root_SDA2;
}
fwnmi_init();
/* Find and initialize PCI host bridges */
init_pci_config_tokens();
eeh_init();
find_and_init_phbs();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
pSeries_nvram_init();
/* Choose an idle loop */
if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
vpa_init(boot_cpuid);
if (get_paca()->lppaca.shared_proc) {
printk(KERN_INFO "Using shared processor idle loop\n");
ppc_md.idle_loop = pseries_shared_idle;
} else {
printk(KERN_INFO "Using dedicated idle loop\n");
ppc_md.idle_loop = pseries_dedicated_idle;
}
} else {
printk(KERN_INFO "Using default idle loop\n");
ppc_md.idle_loop = default_idle;
}
if (systemcfg->platform & PLATFORM_LPAR)
ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
else
ppc_md.enable_pmcs = power4_enable_pmcs;
}
static int __init pSeries_init_panel(void)
{
/* Manually leave the kernel version on the panel. */
ppc_md.progress("Linux ppc64\n", 0);
ppc_md.progress(system_utsname.version, 0);
return 0;
}
arch_initcall(pSeries_init_panel);
/* Build up the ppc64_firmware_features bitmask field
* using contents of device-tree/ibm,hypertas-functions.
* Ultimately this functionality may be moved into prom.c prom_init().
*/
static void __init fw_feature_init(void)
{
struct device_node * dn;
char * hypertas;
unsigned int len;
DBG(" -> fw_feature_init()\n");
ppc64_firmware_features = 0;
dn = of_find_node_by_path("/rtas");
if (dn == NULL) {
printk(KERN_ERR "WARNING ! Cannot find RTAS in device-tree !\n");
goto no_rtas;
}
hypertas = get_property(dn, "ibm,hypertas-functions", &len);
if (hypertas) {
while (len > 0){
int i, hypertas_len;
/* check value against table of strings */
for(i=0; i < FIRMWARE_MAX_FEATURES ;i++) {
if ((firmware_features_table[i].name) &&
(strcmp(firmware_features_table[i].name,hypertas))==0) {
/* we have a match */
ppc64_firmware_features |=
(firmware_features_table[i].val);
break;
}
}
hypertas_len = strlen(hypertas);
len -= hypertas_len +1;
hypertas+= hypertas_len +1;
}
}
of_node_put(dn);
no_rtas:
printk(KERN_INFO "firmware_features = 0x%lx\n",
ppc64_firmware_features);
DBG(" <- fw_feature_init()\n");
}
static void __init pSeries_discover_pic(void)
{
struct device_node *np;
char *typep;
/*
* Setup interrupt mapping options that are needed for finish_device_tree
* to properly parse the OF interrupt tree & do the virtual irq mapping
*/
__irq_offset_value = NUM_ISA_INTERRUPTS;
ppc64_interrupt_controller = IC_INVALID;
for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) {
typep = (char *)get_property(np, "compatible", NULL);
if (strstr(typep, "open-pic"))
ppc64_interrupt_controller = IC_OPEN_PIC;
else if (strstr(typep, "ppc-xicp"))
ppc64_interrupt_controller = IC_PPC_XIC;
else
printk("pSeries_discover_pic: failed to recognize"
" interrupt-controller\n");
break;
}
}
static void pSeries_mach_cpu_die(void)
{
local_irq_disable();
idle_task_exit();
/* Some hardware requires clearing the CPPR, while other hardware does not
* it is safe either way
*/
pSeriesLP_cppr_info(0, 0);
rtas_stop_self();
/* Should never get here... */
BUG();
for(;;);
}
/*
* Early initialization. Relocation is on but do not reference unbolted pages
*/
static void __init pSeries_init_early(void)
{
void *comport;
int iommu_off = 0;
unsigned int default_speed;
u64 physport;
DBG(" -> pSeries_init_early()\n");
fw_feature_init();
if (systemcfg->platform & PLATFORM_LPAR)
hpte_init_lpar();
else {
hpte_init_native();
iommu_off = (of_chosen &&
get_property(of_chosen, "linux,iommu-off", NULL));
}
generic_find_legacy_serial_ports(&physport, &default_speed);
if (systemcfg->platform & PLATFORM_LPAR)
find_udbg_vterm();
else if (physport) {
/* Map the uart for udbg. */
comport = (void *)ioremap(physport, 16);
udbg_init_uart(comport, default_speed);
DBG("Hello World !\n");
}
iommu_init_early_pSeries();
pSeries_discover_pic();
DBG(" <- pSeries_init_early()\n");
}
static int pSeries_check_legacy_ioport(unsigned int baseport)
{
struct device_node *np;
#define I8042_DATA_REG 0x60
#define FDC_BASE 0x3f0
switch(baseport) {
case I8042_DATA_REG:
np = of_find_node_by_type(NULL, "8042");
if (np == NULL)
return -ENODEV;
of_node_put(np);
break;
case FDC_BASE:
np = of_find_node_by_type(NULL, "fdc");
if (np == NULL)
return -ENODEV;
of_node_put(np);
break;
}
return 0;
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
extern struct machdep_calls pSeries_md;
static int __init pSeries_probe(int platform)
{
if (platform != PLATFORM_PSERIES &&
platform != PLATFORM_PSERIES_LPAR)
return 0;
/* if we have some ppc_md fixups for LPAR to do, do
* it here ...
*/
return 1;
}
DECLARE_PER_CPU(unsigned long, smt_snooze_delay);
static inline void dedicated_idle_sleep(unsigned int cpu)
{
struct paca_struct *ppaca = &paca[cpu ^ 1];
/* Only sleep if the other thread is not idle */
if (!(ppaca->lppaca.idle)) {
local_irq_disable();
/*
* We are about to sleep the thread and so wont be polling any
* more.
*/
clear_thread_flag(TIF_POLLING_NRFLAG);
/*
* SMT dynamic mode. Cede will result in this thread going
* dormant, if the partner thread is still doing work. Thread
* wakes up if partner goes idle, an interrupt is presented, or
* a prod occurs. Returning from the cede enables external
* interrupts.
*/
if (!need_resched())
cede_processor();
else
local_irq_enable();
} else {
/*
* Give the HV an opportunity at the processor, since we are
* not doing any work.
*/
poll_pending();
}
}
static int pseries_dedicated_idle(void)
{
long oldval;
struct paca_struct *lpaca = get_paca();
unsigned int cpu = smp_processor_id();
unsigned long start_snooze;
unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay);
while (1) {
/*
* Indicate to the HV that we are idle. Now would be
* a good time to find other work to dispatch.
*/
lpaca->lppaca.idle = 1;
oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
if (!oldval) {
set_thread_flag(TIF_POLLING_NRFLAG);
start_snooze = __get_tb() +
*smt_snooze_delay * tb_ticks_per_usec;
while (!need_resched() && !cpu_is_offline(cpu)) {
ppc64_runlatch_off();
/*
* Go into low thread priority and possibly
* low power mode.
*/
HMT_low();
HMT_very_low();
if (*smt_snooze_delay != 0 &&
__get_tb() > start_snooze) {
HMT_medium();
dedicated_idle_sleep(cpu);
}
}
HMT_medium();
clear_thread_flag(TIF_POLLING_NRFLAG);
} else {
set_need_resched();
}
lpaca->lppaca.idle = 0;
ppc64_runlatch_on();
schedule();
if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
cpu_die();
}
}
static int pseries_shared_idle(void)
{
struct paca_struct *lpaca = get_paca();
unsigned int cpu = smp_processor_id();
while (1) {
/*
* Indicate to the HV that we are idle. Now would be
* a good time to find other work to dispatch.
*/
lpaca->lppaca.idle = 1;
while (!need_resched() && !cpu_is_offline(cpu)) {
local_irq_disable();
ppc64_runlatch_off();
/*
* Yield the processor to the hypervisor. We return if
* an external interrupt occurs (which are driven prior
* to returning here) or if a prod occurs from another
* processor. When returning here, external interrupts
* are enabled.
*
* Check need_resched() again with interrupts disabled
* to avoid a race.
*/
if (!need_resched())
cede_processor();
else
local_irq_enable();
HMT_medium();
}
lpaca->lppaca.idle = 0;
ppc64_runlatch_on();
schedule();
if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
cpu_die();
}
return 0;
}
static int pSeries_pci_probe_mode(struct pci_bus *bus)
{
if (systemcfg->platform & PLATFORM_LPAR)
return PCI_PROBE_DEVTREE;
return PCI_PROBE_NORMAL;
}
struct machdep_calls __initdata pSeries_md = {
.probe = pSeries_probe,
.setup_arch = pSeries_setup_arch,
.init_early = pSeries_init_early,
.get_cpuinfo = pSeries_get_cpuinfo,
.log_error = pSeries_log_error,
.pcibios_fixup = pSeries_final_fixup,
.pci_probe_mode = pSeries_pci_probe_mode,
.irq_bus_setup = pSeries_irq_bus_setup,
.restart = rtas_restart,
.power_off = rtas_power_off,
.halt = rtas_halt,
.panic = rtas_os_term,
.cpu_die = pSeries_mach_cpu_die,
.get_boot_time = rtas_get_boot_time,
.get_rtc_time = rtas_get_rtc_time,
.set_rtc_time = rtas_set_rtc_time,
.calibrate_decr = generic_calibrate_decr,
.progress = rtas_progress,
.check_legacy_ioport = pSeries_check_legacy_ioport,
.system_reset_exception = pSeries_system_reset_exception,
.machine_check_exception = pSeries_machine_check_exception,
};