kernel-ark/drivers/bluetooth/hci_h4.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

283 lines
6.3 KiB
C

/*
BlueZ - Bluetooth protocol stack for Linux
Copyright (C) 2000-2001 Qualcomm Incorporated
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
SOFTWARE IS DISCLAIMED.
*/
/*
* Bluetooth HCI UART(H4) protocol.
*
* $Id: hci_h4.c,v 1.3 2002/09/09 01:17:32 maxk Exp $
*/
#define VERSION "1.2"
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/signal.h>
#include <linux/ioctl.h>
#include <linux/skbuff.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "hci_uart.h"
#include "hci_h4.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#undef BT_DMP
#define BT_DMP( A... )
#endif
/* Initialize protocol */
static int h4_open(struct hci_uart *hu)
{
struct h4_struct *h4;
BT_DBG("hu %p", hu);
h4 = kmalloc(sizeof(*h4), GFP_ATOMIC);
if (!h4)
return -ENOMEM;
memset(h4, 0, sizeof(*h4));
skb_queue_head_init(&h4->txq);
hu->priv = h4;
return 0;
}
/* Flush protocol data */
static int h4_flush(struct hci_uart *hu)
{
struct h4_struct *h4 = hu->priv;
BT_DBG("hu %p", hu);
skb_queue_purge(&h4->txq);
return 0;
}
/* Close protocol */
static int h4_close(struct hci_uart *hu)
{
struct h4_struct *h4 = hu->priv;
hu->priv = NULL;
BT_DBG("hu %p", hu);
skb_queue_purge(&h4->txq);
if (h4->rx_skb)
kfree_skb(h4->rx_skb);
hu->priv = NULL;
kfree(h4);
return 0;
}
/* Enqueue frame for transmittion (padding, crc, etc) */
static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb)
{
struct h4_struct *h4 = hu->priv;
BT_DBG("hu %p skb %p", hu, skb);
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &skb->pkt_type, 1);
skb_queue_tail(&h4->txq, skb);
return 0;
}
static inline int h4_check_data_len(struct h4_struct *h4, int len)
{
register int room = skb_tailroom(h4->rx_skb);
BT_DBG("len %d room %d", len, room);
if (!len) {
BT_DMP(h4->rx_skb->data, h4->rx_skb->len);
hci_recv_frame(h4->rx_skb);
} else if (len > room) {
BT_ERR("Data length is too large");
kfree_skb(h4->rx_skb);
} else {
h4->rx_state = H4_W4_DATA;
h4->rx_count = len;
return len;
}
h4->rx_state = H4_W4_PACKET_TYPE;
h4->rx_skb = NULL;
h4->rx_count = 0;
return 0;
}
/* Recv data */
static int h4_recv(struct hci_uart *hu, void *data, int count)
{
struct h4_struct *h4 = hu->priv;
register char *ptr;
struct hci_event_hdr *eh;
struct hci_acl_hdr *ah;
struct hci_sco_hdr *sh;
register int len, type, dlen;
BT_DBG("hu %p count %d rx_state %ld rx_count %ld",
hu, count, h4->rx_state, h4->rx_count);
ptr = data;
while (count) {
if (h4->rx_count) {
len = min_t(unsigned int, h4->rx_count, count);
memcpy(skb_put(h4->rx_skb, len), ptr, len);
h4->rx_count -= len; count -= len; ptr += len;
if (h4->rx_count)
continue;
switch (h4->rx_state) {
case H4_W4_DATA:
BT_DBG("Complete data");
BT_DMP(h4->rx_skb->data, h4->rx_skb->len);
hci_recv_frame(h4->rx_skb);
h4->rx_state = H4_W4_PACKET_TYPE;
h4->rx_skb = NULL;
continue;
case H4_W4_EVENT_HDR:
eh = (struct hci_event_hdr *) h4->rx_skb->data;
BT_DBG("Event header: evt 0x%2.2x plen %d", eh->evt, eh->plen);
h4_check_data_len(h4, eh->plen);
continue;
case H4_W4_ACL_HDR:
ah = (struct hci_acl_hdr *) h4->rx_skb->data;
dlen = __le16_to_cpu(ah->dlen);
BT_DBG("ACL header: dlen %d", dlen);
h4_check_data_len(h4, dlen);
continue;
case H4_W4_SCO_HDR:
sh = (struct hci_sco_hdr *) h4->rx_skb->data;
BT_DBG("SCO header: dlen %d", sh->dlen);
h4_check_data_len(h4, sh->dlen);
continue;
}
}
/* H4_W4_PACKET_TYPE */
switch (*ptr) {
case HCI_EVENT_PKT:
BT_DBG("Event packet");
h4->rx_state = H4_W4_EVENT_HDR;
h4->rx_count = HCI_EVENT_HDR_SIZE;
type = HCI_EVENT_PKT;
break;
case HCI_ACLDATA_PKT:
BT_DBG("ACL packet");
h4->rx_state = H4_W4_ACL_HDR;
h4->rx_count = HCI_ACL_HDR_SIZE;
type = HCI_ACLDATA_PKT;
break;
case HCI_SCODATA_PKT:
BT_DBG("SCO packet");
h4->rx_state = H4_W4_SCO_HDR;
h4->rx_count = HCI_SCO_HDR_SIZE;
type = HCI_SCODATA_PKT;
break;
default:
BT_ERR("Unknown HCI packet type %2.2x", (__u8)*ptr);
hu->hdev->stat.err_rx++;
ptr++; count--;
continue;
};
ptr++; count--;
/* Allocate packet */
h4->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
if (!h4->rx_skb) {
BT_ERR("Can't allocate mem for new packet");
h4->rx_state = H4_W4_PACKET_TYPE;
h4->rx_count = 0;
return 0;
}
h4->rx_skb->dev = (void *) hu->hdev;
h4->rx_skb->pkt_type = type;
}
return count;
}
static struct sk_buff *h4_dequeue(struct hci_uart *hu)
{
struct h4_struct *h4 = hu->priv;
return skb_dequeue(&h4->txq);
}
static struct hci_uart_proto h4p = {
.id = HCI_UART_H4,
.open = h4_open,
.close = h4_close,
.recv = h4_recv,
.enqueue = h4_enqueue,
.dequeue = h4_dequeue,
.flush = h4_flush,
};
int h4_init(void)
{
int err = hci_uart_register_proto(&h4p);
if (!err)
BT_INFO("HCI H4 protocol initialized");
else
BT_ERR("HCI H4 protocol registration failed");
return err;
}
int h4_deinit(void)
{
return hci_uart_unregister_proto(&h4p);
}