kernel-ark/arch/arm/mach-shark/core.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

115 lines
2.3 KiB
C

/*
* linux/arch/arm/mach-shark/arch.c
*
* Architecture specific stuff.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/serial_8250.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/param.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
static struct plat_serial8250_port serial_platform_data[] = {
{
.iobase = 0x3f8,
.irq = 4,
.uartclk = 1843200,
.regshift = 2,
.iotype = UPIO_PORT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
{
.iobase = 0x2f8,
.irq = 3,
.uartclk = 1843200,
.regshift = 2,
.iotype = UPIO_PORT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
{ },
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = serial_platform_data,
},
};
static int __init shark_init(void)
{
int ret;
if (machine_is_shark())
ret = platform_device_register(&serial_device);
return ret;
}
arch_initcall(shark_init);
extern void shark_init_irq(void);
static struct map_desc shark_io_desc[] __initdata = {
{ IO_BASE , IO_START , IO_SIZE , MT_DEVICE }
};
static void __init shark_map_io(void)
{
iotable_init(shark_io_desc, ARRAY_SIZE(shark_io_desc));
}
#define IRQ_TIMER 0
#define HZ_TIME ((1193180 + HZ/2) / HZ)
static irqreturn_t
shark_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
timer_tick(regs);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction shark_timer_irq = {
.name = "Shark Timer Tick",
.flags = SA_INTERRUPT,
.handler = shark_timer_interrupt
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
static void __init shark_timer_init(void)
{
outb(0x34, 0x43); /* binary, mode 0, LSB/MSB, Ch 0 */
outb(HZ_TIME & 0xff, 0x40); /* LSB of count */
outb(HZ_TIME >> 8, 0x40);
setup_irq(IRQ_TIMER, &shark_timer_irq);
}
static struct sys_timer shark_timer = {
.init = shark_timer_init,
};
MACHINE_START(SHARK, "Shark")
MAINTAINER("Alexander Schulz")
BOOT_MEM(0x08000000, 0x40000000, 0xe0000000)
BOOT_PARAMS(0x08003000)
MAPIO(shark_map_io)
INITIRQ(shark_init_irq)
.timer = &shark_timer,
MACHINE_END