cfbd646fe0
The intelfb driver sets color map depending on currently active pipe. However, if an LVDS display is attached (like in laptop) the active pipe variable is never set. The default value is PIPE_A and can be wrong. Set up the pipe variable during driver initialization after hardware state was read. Also, the detection of the active display (and hence the pipe) is wrong. The pipes are assigned to so called planes. Both pipes are always enabled on my laptop but only one plane is enabled (the plane A for the CRT or the plane B for the LVDS). Change active pipe detection code to take into account a status of the plane assigned to each pipe. The problem is visible in the 8 bpp mode if colors above 15 are used. The first 16 color entries are displayed correctly. The graphics chip description is here (G45 vol. 3): http://intellinuxgraphics.org/documentation.html Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13285 Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Michal Suchanek <hramrach@centrum.cz> Cc: Dean Menezes <samanddeanus@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1707 lines
44 KiB
C
1707 lines
44 KiB
C
/*
|
|
* intelfb
|
|
*
|
|
* Linux framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/
|
|
* 945G/945GM/945GME/965G/965GM integrated graphics chips.
|
|
*
|
|
* Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
|
|
* 2004 Sylvain Meyer
|
|
* 2006 David Airlie
|
|
*
|
|
* This driver consists of two parts. The first part (intelfbdrv.c) provides
|
|
* the basic fbdev interfaces, is derived in part from the radeonfb and
|
|
* vesafb drivers, and is covered by the GPL. The second part (intelfbhw.c)
|
|
* provides the code to program the hardware. Most of it is derived from
|
|
* the i810/i830 XFree86 driver. The HW-specific code is covered here
|
|
* under a dual license (GPL and MIT/XFree86 license).
|
|
*
|
|
* Author: David Dawes
|
|
*
|
|
*/
|
|
|
|
/* $DHD: intelfb/intelfbdrv.c,v 1.20 2003/06/27 15:17:40 dawes Exp $ */
|
|
|
|
/*
|
|
* Changes:
|
|
* 01/2003 - Initial driver (0.1.0), no mode switching, no acceleration.
|
|
* This initial version is a basic core that works a lot like
|
|
* the vesafb driver. It must be built-in to the kernel,
|
|
* and the initial video mode must be set with vga=XXX at
|
|
* boot time. (David Dawes)
|
|
*
|
|
* 01/2003 - Version 0.2.0: Mode switching added, colormap support
|
|
* implemented, Y panning, and soft screen blanking implemented.
|
|
* No acceleration yet. (David Dawes)
|
|
*
|
|
* 01/2003 - Version 0.3.0: fbcon acceleration support added. Module
|
|
* option handling added. (David Dawes)
|
|
*
|
|
* 01/2003 - Version 0.4.0: fbcon HW cursor support added. (David Dawes)
|
|
*
|
|
* 01/2003 - Version 0.4.1: Add auto-generation of built-in modes.
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.4.2: Add check for active non-CRT devices, and
|
|
* mode validation checks. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.4.3: Check when the VC is in graphics mode so that
|
|
* acceleration is disabled while an XFree86 server is running.
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.4.4: Monitor DPMS support. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.4.5: Basic XFree86 + fbdev working. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.5.0: Modify to work with the 2.5.32 kernel as well
|
|
* as 2.4.x kernels. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.6.0: Split out HW-specifics into a separate file.
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.0: Test on 852GM/855GM. Acceleration and HW
|
|
* cursor are disabled on this platform. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.1: Test on 845G. Acceleration is disabled
|
|
* on this platform. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.2: Test on 830M. Acceleration and HW
|
|
* cursor are disabled on this platform. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.3: Fix 8-bit modes for mobile platforms
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.4: Add checks for FB and FBCON_HAS_CFB* configured
|
|
* in the kernel, and add mode bpp verification and default
|
|
* bpp selection based on which FBCON_HAS_CFB* are configured.
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.5: Add basic package/install scripts based on the
|
|
* DRI packaging scripts. (David Dawes)
|
|
*
|
|
* 04/2003 - Version 0.7.6: Fix typo that affects builds with SMP-enabled
|
|
* kernels. (David Dawes, reported by Anupam).
|
|
*
|
|
* 06/2003 - Version 0.7.7:
|
|
* Fix Makefile.kernel build problem (Tsutomu Yasuda).
|
|
* Fix mis-placed #endif (2.4.21 kernel).
|
|
*
|
|
* 09/2004 - Version 0.9.0 - by Sylvain Meyer
|
|
* Port to linux 2.6 kernel fbdev
|
|
* Fix HW accel and HW cursor on i845G
|
|
* Use of agpgart for fb memory reservation
|
|
* Add mtrr support
|
|
*
|
|
* 10/2004 - Version 0.9.1
|
|
* Use module_param instead of old MODULE_PARM
|
|
* Some cleanup
|
|
*
|
|
* 11/2004 - Version 0.9.2
|
|
* Add vram option to reserve more memory than stolen by BIOS
|
|
* Fix intelfbhw_pan_display typo
|
|
* Add __initdata annotations
|
|
*
|
|
* 04/2008 - Version 0.9.5
|
|
* Add support for 965G/965GM. (Maik Broemme <mbroemme@plusserver.de>)
|
|
*
|
|
* 08/2008 - Version 0.9.6
|
|
* Add support for 945GME. (Phil Endecott <spam_from_intelfb@chezphil.org>)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/pagemap.h>
|
|
#include <linux/screen_info.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#ifdef CONFIG_MTRR
|
|
#include <asm/mtrr.h>
|
|
#endif
|
|
|
|
#include "intelfb.h"
|
|
#include "intelfbhw.h"
|
|
#include "../edid.h"
|
|
|
|
static void __devinit get_initial_mode(struct intelfb_info *dinfo);
|
|
static void update_dinfo(struct intelfb_info *dinfo,
|
|
struct fb_var_screeninfo *var);
|
|
static int intelfb_open(struct fb_info *info, int user);
|
|
static int intelfb_release(struct fb_info *info, int user);
|
|
static int intelfb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info);
|
|
static int intelfb_set_par(struct fb_info *info);
|
|
static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info);
|
|
|
|
static int intelfb_blank(int blank, struct fb_info *info);
|
|
static int intelfb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info);
|
|
|
|
static void intelfb_fillrect(struct fb_info *info,
|
|
const struct fb_fillrect *rect);
|
|
static void intelfb_copyarea(struct fb_info *info,
|
|
const struct fb_copyarea *region);
|
|
static void intelfb_imageblit(struct fb_info *info,
|
|
const struct fb_image *image);
|
|
static int intelfb_cursor(struct fb_info *info,
|
|
struct fb_cursor *cursor);
|
|
|
|
static int intelfb_sync(struct fb_info *info);
|
|
|
|
static int intelfb_ioctl(struct fb_info *info,
|
|
unsigned int cmd, unsigned long arg);
|
|
|
|
static int __devinit intelfb_pci_register(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent);
|
|
static void __devexit intelfb_pci_unregister(struct pci_dev *pdev);
|
|
static int __devinit intelfb_set_fbinfo(struct intelfb_info *dinfo);
|
|
|
|
/*
|
|
* Limiting the class to PCI_CLASS_DISPLAY_VGA prevents function 1 of the
|
|
* mobile chipsets from being registered.
|
|
*/
|
|
#if DETECT_VGA_CLASS_ONLY
|
|
#define INTELFB_CLASS_MASK ~0 << 8
|
|
#else
|
|
#define INTELFB_CLASS_MASK 0
|
|
#endif
|
|
|
|
static struct pci_device_id intelfb_pci_table[] __devinitdata = {
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_830M, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_830M },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GM },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GME, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GME },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965GM },
|
|
{ 0, }
|
|
};
|
|
|
|
/* Global data */
|
|
static int num_registered = 0;
|
|
|
|
/* fb ops */
|
|
static struct fb_ops intel_fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_open = intelfb_open,
|
|
.fb_release = intelfb_release,
|
|
.fb_check_var = intelfb_check_var,
|
|
.fb_set_par = intelfb_set_par,
|
|
.fb_setcolreg = intelfb_setcolreg,
|
|
.fb_blank = intelfb_blank,
|
|
.fb_pan_display = intelfb_pan_display,
|
|
.fb_fillrect = intelfb_fillrect,
|
|
.fb_copyarea = intelfb_copyarea,
|
|
.fb_imageblit = intelfb_imageblit,
|
|
.fb_cursor = intelfb_cursor,
|
|
.fb_sync = intelfb_sync,
|
|
.fb_ioctl = intelfb_ioctl
|
|
};
|
|
|
|
/* PCI driver module table */
|
|
static struct pci_driver intelfb_driver = {
|
|
.name = "intelfb",
|
|
.id_table = intelfb_pci_table,
|
|
.probe = intelfb_pci_register,
|
|
.remove = __devexit_p(intelfb_pci_unregister)
|
|
};
|
|
|
|
/* Module description/parameters */
|
|
MODULE_AUTHOR("David Dawes <dawes@tungstengraphics.com>, "
|
|
"Sylvain Meyer <sylvain.meyer@worldonline.fr>");
|
|
MODULE_DESCRIPTION("Framebuffer driver for Intel(R) " SUPPORTED_CHIPSETS
|
|
" chipsets");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_DEVICE_TABLE(pci, intelfb_pci_table);
|
|
|
|
static int accel = 1;
|
|
static int vram = 4;
|
|
static int hwcursor = 0;
|
|
static int mtrr = 1;
|
|
static int fixed = 0;
|
|
static int noinit = 0;
|
|
static int noregister = 0;
|
|
static int probeonly = 0;
|
|
static int idonly = 0;
|
|
static int bailearly = 0;
|
|
static int voffset = 48;
|
|
static char *mode = NULL;
|
|
|
|
module_param(accel, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(accel, "Enable hardware acceleration");
|
|
module_param(vram, int, S_IRUGO);
|
|
MODULE_PARM_DESC(vram, "System RAM to allocate to framebuffer in MiB");
|
|
module_param(voffset, int, S_IRUGO);
|
|
MODULE_PARM_DESC(voffset, "Offset of framebuffer in MiB");
|
|
module_param(hwcursor, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(hwcursor, "Enable HW cursor");
|
|
module_param(mtrr, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(mtrr, "Enable MTRR support");
|
|
module_param(fixed, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(fixed, "Disable mode switching");
|
|
module_param(noinit, bool, 0);
|
|
MODULE_PARM_DESC(noinit, "Don't initialise graphics mode when loading");
|
|
module_param(noregister, bool, 0);
|
|
MODULE_PARM_DESC(noregister, "Don't register, just probe and exit (debug)");
|
|
module_param(probeonly, bool, 0);
|
|
MODULE_PARM_DESC(probeonly, "Do a minimal probe (debug)");
|
|
module_param(idonly, bool, 0);
|
|
MODULE_PARM_DESC(idonly, "Just identify without doing anything else (debug)");
|
|
module_param(bailearly, bool, 0);
|
|
MODULE_PARM_DESC(bailearly, "Bail out early, depending on value (debug)");
|
|
module_param(mode, charp, S_IRUGO);
|
|
MODULE_PARM_DESC(mode,
|
|
"Initial video mode \"<xres>x<yres>[-<depth>][@<refresh>]\"");
|
|
|
|
#ifndef MODULE
|
|
#define OPT_EQUAL(opt, name) (!strncmp(opt, name, strlen(name)))
|
|
#define OPT_INTVAL(opt, name) simple_strtoul(opt + strlen(name) + 1, NULL, 0)
|
|
#define OPT_STRVAL(opt, name) (opt + strlen(name))
|
|
|
|
static __inline__ char * get_opt_string(const char *this_opt, const char *name)
|
|
{
|
|
const char *p;
|
|
int i;
|
|
char *ret;
|
|
|
|
p = OPT_STRVAL(this_opt, name);
|
|
i = 0;
|
|
while (p[i] && p[i] != ' ' && p[i] != ',')
|
|
i++;
|
|
ret = kmalloc(i + 1, GFP_KERNEL);
|
|
if (ret) {
|
|
strncpy(ret, p, i);
|
|
ret[i] = '\0';
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static __inline__ int get_opt_int(const char *this_opt, const char *name,
|
|
int *ret)
|
|
{
|
|
if (!ret)
|
|
return 0;
|
|
|
|
if (!OPT_EQUAL(this_opt, name))
|
|
return 0;
|
|
|
|
*ret = OPT_INTVAL(this_opt, name);
|
|
return 1;
|
|
}
|
|
|
|
static __inline__ int get_opt_bool(const char *this_opt, const char *name,
|
|
int *ret)
|
|
{
|
|
if (!ret)
|
|
return 0;
|
|
|
|
if (OPT_EQUAL(this_opt, name)) {
|
|
if (this_opt[strlen(name)] == '=')
|
|
*ret = simple_strtoul(this_opt + strlen(name) + 1,
|
|
NULL, 0);
|
|
else
|
|
*ret = 1;
|
|
} else {
|
|
if (OPT_EQUAL(this_opt, "no") && OPT_EQUAL(this_opt + 2, name))
|
|
*ret = 0;
|
|
else
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int __init intelfb_setup(char *options)
|
|
{
|
|
char *this_opt;
|
|
|
|
DBG_MSG("intelfb_setup\n");
|
|
|
|
if (!options || !*options) {
|
|
DBG_MSG("no options\n");
|
|
return 0;
|
|
} else
|
|
DBG_MSG("options: %s\n", options);
|
|
|
|
/*
|
|
* These are the built-in options analogous to the module parameters
|
|
* defined above.
|
|
*
|
|
* The syntax is:
|
|
*
|
|
* video=intelfb:[mode][,<param>=<val>] ...
|
|
*
|
|
* e.g.,
|
|
*
|
|
* video=intelfb:1024x768-16@75,accel=0
|
|
*/
|
|
|
|
while ((this_opt = strsep(&options, ","))) {
|
|
if (!*this_opt)
|
|
continue;
|
|
if (get_opt_bool(this_opt, "accel", &accel))
|
|
;
|
|
else if (get_opt_int(this_opt, "vram", &vram))
|
|
;
|
|
else if (get_opt_bool(this_opt, "hwcursor", &hwcursor))
|
|
;
|
|
else if (get_opt_bool(this_opt, "mtrr", &mtrr))
|
|
;
|
|
else if (get_opt_bool(this_opt, "fixed", &fixed))
|
|
;
|
|
else if (get_opt_bool(this_opt, "init", &noinit))
|
|
noinit = !noinit;
|
|
else if (OPT_EQUAL(this_opt, "mode="))
|
|
mode = get_opt_string(this_opt, "mode=");
|
|
else
|
|
mode = this_opt;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static int __init intelfb_init(void)
|
|
{
|
|
#ifndef MODULE
|
|
char *option = NULL;
|
|
#endif
|
|
|
|
DBG_MSG("intelfb_init\n");
|
|
|
|
INF_MSG("Framebuffer driver for "
|
|
"Intel(R) " SUPPORTED_CHIPSETS " chipsets\n");
|
|
INF_MSG("Version " INTELFB_VERSION "\n");
|
|
|
|
if (idonly)
|
|
return -ENODEV;
|
|
|
|
#ifndef MODULE
|
|
if (fb_get_options("intelfb", &option))
|
|
return -ENODEV;
|
|
intelfb_setup(option);
|
|
#endif
|
|
|
|
return pci_register_driver(&intelfb_driver);
|
|
}
|
|
|
|
static void __exit intelfb_exit(void)
|
|
{
|
|
DBG_MSG("intelfb_exit\n");
|
|
pci_unregister_driver(&intelfb_driver);
|
|
}
|
|
|
|
module_init(intelfb_init);
|
|
module_exit(intelfb_exit);
|
|
|
|
/***************************************************************
|
|
* mtrr support functions *
|
|
***************************************************************/
|
|
|
|
#ifdef CONFIG_MTRR
|
|
static inline void __devinit set_mtrr(struct intelfb_info *dinfo)
|
|
{
|
|
dinfo->mtrr_reg = mtrr_add(dinfo->aperture.physical,
|
|
dinfo->aperture.size, MTRR_TYPE_WRCOMB, 1);
|
|
if (dinfo->mtrr_reg < 0) {
|
|
ERR_MSG("unable to set MTRR\n");
|
|
return;
|
|
}
|
|
dinfo->has_mtrr = 1;
|
|
}
|
|
static inline void unset_mtrr(struct intelfb_info *dinfo)
|
|
{
|
|
if (dinfo->has_mtrr)
|
|
mtrr_del(dinfo->mtrr_reg, dinfo->aperture.physical,
|
|
dinfo->aperture.size);
|
|
}
|
|
#else
|
|
#define set_mtrr(x) WRN_MSG("MTRR is disabled in the kernel\n")
|
|
|
|
#define unset_mtrr(x) do { } while (0)
|
|
#endif /* CONFIG_MTRR */
|
|
|
|
/***************************************************************
|
|
* driver init / cleanup *
|
|
***************************************************************/
|
|
|
|
static void cleanup(struct intelfb_info *dinfo)
|
|
{
|
|
DBG_MSG("cleanup\n");
|
|
|
|
if (!dinfo)
|
|
return;
|
|
|
|
intelfbhw_disable_irq(dinfo);
|
|
|
|
fb_dealloc_cmap(&dinfo->info->cmap);
|
|
kfree(dinfo->info->pixmap.addr);
|
|
|
|
if (dinfo->registered)
|
|
unregister_framebuffer(dinfo->info);
|
|
|
|
unset_mtrr(dinfo);
|
|
|
|
if (dinfo->fbmem_gart && dinfo->gtt_fb_mem) {
|
|
agp_unbind_memory(dinfo->gtt_fb_mem);
|
|
agp_free_memory(dinfo->gtt_fb_mem);
|
|
}
|
|
if (dinfo->gtt_cursor_mem) {
|
|
agp_unbind_memory(dinfo->gtt_cursor_mem);
|
|
agp_free_memory(dinfo->gtt_cursor_mem);
|
|
}
|
|
if (dinfo->gtt_ring_mem) {
|
|
agp_unbind_memory(dinfo->gtt_ring_mem);
|
|
agp_free_memory(dinfo->gtt_ring_mem);
|
|
}
|
|
|
|
#ifdef CONFIG_FB_INTEL_I2C
|
|
/* un-register I2C bus */
|
|
intelfb_delete_i2c_busses(dinfo);
|
|
#endif
|
|
|
|
if (dinfo->mmio_base)
|
|
iounmap((void __iomem *)dinfo->mmio_base);
|
|
if (dinfo->aperture.virtual)
|
|
iounmap((void __iomem *)dinfo->aperture.virtual);
|
|
|
|
if (dinfo->flag & INTELFB_MMIO_ACQUIRED)
|
|
release_mem_region(dinfo->mmio_base_phys, INTEL_REG_SIZE);
|
|
if (dinfo->flag & INTELFB_FB_ACQUIRED)
|
|
release_mem_region(dinfo->aperture.physical,
|
|
dinfo->aperture.size);
|
|
framebuffer_release(dinfo->info);
|
|
}
|
|
|
|
#define bailout(dinfo) do { \
|
|
DBG_MSG("bailout\n"); \
|
|
cleanup(dinfo); \
|
|
INF_MSG("Not going to register framebuffer, exiting...\n"); \
|
|
return -ENODEV; \
|
|
} while (0)
|
|
|
|
|
|
static int __devinit intelfb_pci_register(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct fb_info *info;
|
|
struct intelfb_info *dinfo;
|
|
int i, err, dvo;
|
|
int aperture_size, stolen_size;
|
|
struct agp_kern_info gtt_info;
|
|
int agp_memtype;
|
|
const char *s;
|
|
struct agp_bridge_data *bridge;
|
|
int aperture_bar = 0;
|
|
int mmio_bar = 1;
|
|
int offset;
|
|
|
|
DBG_MSG("intelfb_pci_register\n");
|
|
|
|
num_registered++;
|
|
if (num_registered != 1) {
|
|
ERR_MSG("Attempted to register %d devices "
|
|
"(should be only 1).\n", num_registered);
|
|
return -ENODEV;
|
|
}
|
|
|
|
info = framebuffer_alloc(sizeof(struct intelfb_info), &pdev->dev);
|
|
if (!info) {
|
|
ERR_MSG("Could not allocate memory for intelfb_info.\n");
|
|
return -ENODEV;
|
|
}
|
|
if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) {
|
|
ERR_MSG("Could not allocate cmap for intelfb_info.\n");
|
|
goto err_out_cmap;
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo = info->par;
|
|
dinfo->info = info;
|
|
dinfo->fbops = &intel_fb_ops;
|
|
dinfo->pdev = pdev;
|
|
|
|
/* Reserve pixmap space. */
|
|
info->pixmap.addr = kzalloc(64 * 1024, GFP_KERNEL);
|
|
if (info->pixmap.addr == NULL) {
|
|
ERR_MSG("Cannot reserve pixmap memory.\n");
|
|
goto err_out_pixmap;
|
|
}
|
|
|
|
/* set early this option because it could be changed by tv encoder
|
|
driver */
|
|
dinfo->fixed_mode = fixed;
|
|
|
|
/* Enable device. */
|
|
if ((err = pci_enable_device(pdev))) {
|
|
ERR_MSG("Cannot enable device.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Set base addresses. */
|
|
if ((ent->device == PCI_DEVICE_ID_INTEL_915G) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_915GM) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_945G) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_945GM) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_945GME) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_965G) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_965GM)) {
|
|
|
|
aperture_bar = 2;
|
|
mmio_bar = 0;
|
|
}
|
|
dinfo->aperture.physical = pci_resource_start(pdev, aperture_bar);
|
|
dinfo->aperture.size = pci_resource_len(pdev, aperture_bar);
|
|
dinfo->mmio_base_phys = pci_resource_start(pdev, mmio_bar);
|
|
DBG_MSG("fb aperture: 0x%llx/0x%llx, MMIO region: 0x%llx/0x%llx\n",
|
|
(unsigned long long)pci_resource_start(pdev, aperture_bar),
|
|
(unsigned long long)pci_resource_len(pdev, aperture_bar),
|
|
(unsigned long long)pci_resource_start(pdev, mmio_bar),
|
|
(unsigned long long)pci_resource_len(pdev, mmio_bar));
|
|
|
|
/* Reserve the fb and MMIO regions */
|
|
if (!request_mem_region(dinfo->aperture.physical, dinfo->aperture.size,
|
|
INTELFB_MODULE_NAME)) {
|
|
ERR_MSG("Cannot reserve FB region.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo->flag |= INTELFB_FB_ACQUIRED;
|
|
|
|
if (!request_mem_region(dinfo->mmio_base_phys,
|
|
INTEL_REG_SIZE,
|
|
INTELFB_MODULE_NAME)) {
|
|
ERR_MSG("Cannot reserve MMIO region.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo->flag |= INTELFB_MMIO_ACQUIRED;
|
|
|
|
/* Get the chipset info. */
|
|
dinfo->pci_chipset = pdev->device;
|
|
|
|
if (intelfbhw_get_chipset(pdev, dinfo)) {
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (intelfbhw_get_memory(pdev, &aperture_size,&stolen_size)) {
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
INF_MSG("%02x:%02x.%d: %s, aperture size %dMB, "
|
|
"stolen memory %dkB\n",
|
|
pdev->bus->number, PCI_SLOT(pdev->devfn),
|
|
PCI_FUNC(pdev->devfn), dinfo->name,
|
|
BtoMB(aperture_size), BtoKB(stolen_size));
|
|
|
|
/* Set these from the options. */
|
|
dinfo->accel = accel;
|
|
dinfo->hwcursor = hwcursor;
|
|
|
|
if (NOACCEL_CHIPSET(dinfo) && dinfo->accel == 1) {
|
|
INF_MSG("Acceleration is not supported for the %s chipset.\n",
|
|
dinfo->name);
|
|
dinfo->accel = 0;
|
|
}
|
|
|
|
/* Framebuffer parameters - Use all the stolen memory if >= vram */
|
|
if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
|
|
dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
|
|
dinfo->fbmem_gart = 0;
|
|
} else {
|
|
dinfo->fb.size = MB(vram);
|
|
dinfo->fbmem_gart = 1;
|
|
}
|
|
|
|
/* Allocate space for the ring buffer and HW cursor if enabled. */
|
|
if (dinfo->accel) {
|
|
dinfo->ring.size = RINGBUFFER_SIZE;
|
|
dinfo->ring_tail_mask = dinfo->ring.size - 1;
|
|
}
|
|
if (dinfo->hwcursor)
|
|
dinfo->cursor.size = HW_CURSOR_SIZE;
|
|
|
|
/* Use agpgart to manage the GATT */
|
|
if (!(bridge = agp_backend_acquire(pdev))) {
|
|
ERR_MSG("cannot acquire agp\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* get the current gatt info */
|
|
if (agp_copy_info(bridge, >t_info)) {
|
|
ERR_MSG("cannot get agp info\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (MB(voffset) < stolen_size)
|
|
offset = (stolen_size >> 12);
|
|
else
|
|
offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
|
|
|
|
/* set the mem offsets - set them after the already used pages */
|
|
if (dinfo->accel)
|
|
dinfo->ring.offset = offset + gtt_info.current_memory;
|
|
if (dinfo->hwcursor)
|
|
dinfo->cursor.offset = offset +
|
|
+ gtt_info.current_memory + (dinfo->ring.size >> 12);
|
|
if (dinfo->fbmem_gart)
|
|
dinfo->fb.offset = offset +
|
|
+ gtt_info.current_memory + (dinfo->ring.size >> 12)
|
|
+ (dinfo->cursor.size >> 12);
|
|
|
|
/* Allocate memories (which aren't stolen) */
|
|
/* Map the fb and MMIO regions */
|
|
/* ioremap only up to the end of used aperture */
|
|
dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
|
|
(dinfo->aperture.physical, ((offset + dinfo->fb.offset) << 12)
|
|
+ dinfo->fb.size);
|
|
if (!dinfo->aperture.virtual) {
|
|
ERR_MSG("Cannot remap FB region.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo->mmio_base =
|
|
(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
|
|
INTEL_REG_SIZE);
|
|
if (!dinfo->mmio_base) {
|
|
ERR_MSG("Cannot remap MMIO region.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (dinfo->accel) {
|
|
if (!(dinfo->gtt_ring_mem =
|
|
agp_allocate_memory(bridge, dinfo->ring.size >> 12,
|
|
AGP_NORMAL_MEMORY))) {
|
|
ERR_MSG("cannot allocate ring buffer memory\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -ENOMEM;
|
|
}
|
|
if (agp_bind_memory(dinfo->gtt_ring_mem,
|
|
dinfo->ring.offset)) {
|
|
ERR_MSG("cannot bind ring buffer memory\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -EBUSY;
|
|
}
|
|
dinfo->ring.physical = dinfo->aperture.physical
|
|
+ (dinfo->ring.offset << 12);
|
|
dinfo->ring.virtual = dinfo->aperture.virtual
|
|
+ (dinfo->ring.offset << 12);
|
|
dinfo->ring_head = 0;
|
|
}
|
|
if (dinfo->hwcursor) {
|
|
agp_memtype = dinfo->mobile ? AGP_PHYSICAL_MEMORY
|
|
: AGP_NORMAL_MEMORY;
|
|
if (!(dinfo->gtt_cursor_mem =
|
|
agp_allocate_memory(bridge, dinfo->cursor.size >> 12,
|
|
agp_memtype))) {
|
|
ERR_MSG("cannot allocate cursor memory\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -ENOMEM;
|
|
}
|
|
if (agp_bind_memory(dinfo->gtt_cursor_mem,
|
|
dinfo->cursor.offset)) {
|
|
ERR_MSG("cannot bind cursor memory\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -EBUSY;
|
|
}
|
|
if (dinfo->mobile)
|
|
dinfo->cursor.physical
|
|
= dinfo->gtt_cursor_mem->physical;
|
|
else
|
|
dinfo->cursor.physical = dinfo->aperture.physical
|
|
+ (dinfo->cursor.offset << 12);
|
|
dinfo->cursor.virtual = dinfo->aperture.virtual
|
|
+ (dinfo->cursor.offset << 12);
|
|
}
|
|
if (dinfo->fbmem_gart) {
|
|
if (!(dinfo->gtt_fb_mem =
|
|
agp_allocate_memory(bridge, dinfo->fb.size >> 12,
|
|
AGP_NORMAL_MEMORY))) {
|
|
WRN_MSG("cannot allocate framebuffer memory - use "
|
|
"the stolen one\n");
|
|
dinfo->fbmem_gart = 0;
|
|
}
|
|
if (agp_bind_memory(dinfo->gtt_fb_mem,
|
|
dinfo->fb.offset)) {
|
|
WRN_MSG("cannot bind framebuffer memory - use "
|
|
"the stolen one\n");
|
|
dinfo->fbmem_gart = 0;
|
|
}
|
|
}
|
|
|
|
/* update framebuffer memory parameters */
|
|
if (!dinfo->fbmem_gart)
|
|
dinfo->fb.offset = 0; /* starts at offset 0 */
|
|
dinfo->fb.physical = dinfo->aperture.physical
|
|
+ (dinfo->fb.offset << 12);
|
|
dinfo->fb.virtual = dinfo->aperture.virtual + (dinfo->fb.offset << 12);
|
|
dinfo->fb_start = dinfo->fb.offset << 12;
|
|
|
|
/* release agpgart */
|
|
agp_backend_release(bridge);
|
|
|
|
if (mtrr)
|
|
set_mtrr(dinfo);
|
|
|
|
DBG_MSG("fb: 0x%x(+ 0x%x)/0x%x (0x%p)\n",
|
|
dinfo->fb.physical, dinfo->fb.offset, dinfo->fb.size,
|
|
dinfo->fb.virtual);
|
|
DBG_MSG("MMIO: 0x%x/0x%x (0x%p)\n",
|
|
dinfo->mmio_base_phys, INTEL_REG_SIZE,
|
|
dinfo->mmio_base);
|
|
DBG_MSG("ring buffer: 0x%x/0x%x (0x%p)\n",
|
|
dinfo->ring.physical, dinfo->ring.size,
|
|
dinfo->ring.virtual);
|
|
DBG_MSG("HW cursor: 0x%x/0x%x (0x%p) (offset 0x%x) (phys 0x%x)\n",
|
|
dinfo->cursor.physical, dinfo->cursor.size,
|
|
dinfo->cursor.virtual, dinfo->cursor.offset,
|
|
dinfo->cursor.physical);
|
|
|
|
DBG_MSG("options: vram = %d, accel = %d, hwcursor = %d, fixed = %d, "
|
|
"noinit = %d\n", vram, accel, hwcursor, fixed, noinit);
|
|
DBG_MSG("options: mode = \"%s\"\n", mode ? mode : "");
|
|
|
|
if (probeonly)
|
|
bailout(dinfo);
|
|
|
|
/*
|
|
* Check if the LVDS port or any DVO ports are enabled. If so,
|
|
* don't allow mode switching
|
|
*/
|
|
dvo = intelfbhw_check_non_crt(dinfo);
|
|
if (dvo) {
|
|
dinfo->fixed_mode = 1;
|
|
WRN_MSG("Non-CRT device is enabled ( ");
|
|
i = 0;
|
|
while (dvo) {
|
|
if (dvo & 1) {
|
|
s = intelfbhw_dvo_to_string(1 << i);
|
|
if (s)
|
|
printk("%s ", s);
|
|
}
|
|
dvo >>= 1;
|
|
++i;
|
|
}
|
|
printk("). Disabling mode switching.\n");
|
|
}
|
|
|
|
if (bailearly == 1)
|
|
bailout(dinfo);
|
|
|
|
if (FIXED_MODE(dinfo) &&
|
|
screen_info.orig_video_isVGA != VIDEO_TYPE_VLFB) {
|
|
ERR_MSG("Video mode must be programmed at boot time.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (bailearly == 2)
|
|
bailout(dinfo);
|
|
|
|
/* Initialise dinfo and related data. */
|
|
/* If an initial mode was programmed at boot time, get its details. */
|
|
if (screen_info.orig_video_isVGA == VIDEO_TYPE_VLFB)
|
|
get_initial_mode(dinfo);
|
|
|
|
if (bailearly == 3)
|
|
bailout(dinfo);
|
|
|
|
if (FIXED_MODE(dinfo)) /* remap fb address */
|
|
update_dinfo(dinfo, &dinfo->initial_var);
|
|
|
|
if (bailearly == 4)
|
|
bailout(dinfo);
|
|
|
|
|
|
if (intelfb_set_fbinfo(dinfo)) {
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (bailearly == 5)
|
|
bailout(dinfo);
|
|
|
|
#ifdef CONFIG_FB_INTEL_I2C
|
|
/* register I2C bus */
|
|
intelfb_create_i2c_busses(dinfo);
|
|
#endif
|
|
|
|
if (bailearly == 6)
|
|
bailout(dinfo);
|
|
|
|
pci_set_drvdata(pdev, dinfo);
|
|
|
|
/* Save the initial register state. */
|
|
i = intelfbhw_read_hw_state(dinfo, &dinfo->save_state,
|
|
bailearly > 6 ? bailearly - 6 : 0);
|
|
if (i != 0) {
|
|
DBG_MSG("intelfbhw_read_hw_state returned %d\n", i);
|
|
bailout(dinfo);
|
|
}
|
|
|
|
intelfbhw_print_hw_state(dinfo, &dinfo->save_state);
|
|
|
|
if (bailearly == 18)
|
|
bailout(dinfo);
|
|
|
|
/* read active pipe */
|
|
dinfo->pipe = intelfbhw_active_pipe(&dinfo->save_state);
|
|
|
|
/* Cursor initialisation */
|
|
if (dinfo->hwcursor) {
|
|
intelfbhw_cursor_init(dinfo);
|
|
intelfbhw_cursor_reset(dinfo);
|
|
}
|
|
|
|
if (bailearly == 19)
|
|
bailout(dinfo);
|
|
|
|
/* 2d acceleration init */
|
|
if (dinfo->accel)
|
|
intelfbhw_2d_start(dinfo);
|
|
|
|
if (bailearly == 20)
|
|
bailout(dinfo);
|
|
|
|
if (noregister)
|
|
bailout(dinfo);
|
|
|
|
if (register_framebuffer(dinfo->info) < 0) {
|
|
ERR_MSG("Cannot register framebuffer.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo->registered = 1;
|
|
dinfo->open = 0;
|
|
|
|
init_waitqueue_head(&dinfo->vsync.wait);
|
|
spin_lock_init(&dinfo->int_lock);
|
|
dinfo->irq_flags = 0;
|
|
dinfo->vsync.pan_display = 0;
|
|
dinfo->vsync.pan_offset = 0;
|
|
|
|
return 0;
|
|
|
|
err_out_pixmap:
|
|
fb_dealloc_cmap(&info->cmap);
|
|
err_out_cmap:
|
|
framebuffer_release(info);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __devexit
|
|
intelfb_pci_unregister(struct pci_dev *pdev)
|
|
{
|
|
struct intelfb_info *dinfo = pci_get_drvdata(pdev);
|
|
|
|
DBG_MSG("intelfb_pci_unregister\n");
|
|
|
|
if (!dinfo)
|
|
return;
|
|
|
|
cleanup(dinfo);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
/***************************************************************
|
|
* helper functions *
|
|
***************************************************************/
|
|
|
|
int __inline__ intelfb_var_to_depth(const struct fb_var_screeninfo *var)
|
|
{
|
|
DBG_MSG("intelfb_var_to_depth: bpp: %d, green.length is %d\n",
|
|
var->bits_per_pixel, var->green.length);
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 16:
|
|
return (var->green.length == 6) ? 16 : 15;
|
|
case 32:
|
|
return 24;
|
|
default:
|
|
return var->bits_per_pixel;
|
|
}
|
|
}
|
|
|
|
|
|
static __inline__ int var_to_refresh(const struct fb_var_screeninfo *var)
|
|
{
|
|
int xtot = var->xres + var->left_margin + var->right_margin +
|
|
var->hsync_len;
|
|
int ytot = var->yres + var->upper_margin + var->lower_margin +
|
|
var->vsync_len;
|
|
|
|
return (1000000000 / var->pixclock * 1000 + 500) / xtot / ytot;
|
|
}
|
|
|
|
/***************************************************************
|
|
* Various intialisation functions *
|
|
***************************************************************/
|
|
|
|
static void __devinit get_initial_mode(struct intelfb_info *dinfo)
|
|
{
|
|
struct fb_var_screeninfo *var;
|
|
int xtot, ytot;
|
|
|
|
DBG_MSG("get_initial_mode\n");
|
|
|
|
dinfo->initial_vga = 1;
|
|
dinfo->initial_fb_base = screen_info.lfb_base;
|
|
dinfo->initial_video_ram = screen_info.lfb_size * KB(64);
|
|
dinfo->initial_pitch = screen_info.lfb_linelength;
|
|
|
|
var = &dinfo->initial_var;
|
|
memset(var, 0, sizeof(*var));
|
|
var->xres = screen_info.lfb_width;
|
|
var->yres = screen_info.lfb_height;
|
|
var->bits_per_pixel = screen_info.lfb_depth;
|
|
switch (screen_info.lfb_depth) {
|
|
case 15:
|
|
var->bits_per_pixel = 16;
|
|
break;
|
|
case 24:
|
|
var->bits_per_pixel = 32;
|
|
break;
|
|
}
|
|
|
|
DBG_MSG("Initial info: FB is 0x%x/0x%x (%d kByte)\n",
|
|
dinfo->initial_fb_base, dinfo->initial_video_ram,
|
|
BtoKB(dinfo->initial_video_ram));
|
|
|
|
DBG_MSG("Initial info: mode is %dx%d-%d (%d)\n",
|
|
var->xres, var->yres, var->bits_per_pixel,
|
|
dinfo->initial_pitch);
|
|
|
|
/* Dummy timing values (assume 60Hz) */
|
|
var->left_margin = (var->xres / 8) & 0xf8;
|
|
var->right_margin = 32;
|
|
var->upper_margin = 16;
|
|
var->lower_margin = 4;
|
|
var->hsync_len = (var->xres / 8) & 0xf8;
|
|
var->vsync_len = 4;
|
|
|
|
xtot = var->xres + var->left_margin +
|
|
var->right_margin + var->hsync_len;
|
|
ytot = var->yres + var->upper_margin +
|
|
var->lower_margin + var->vsync_len;
|
|
var->pixclock = 10000000 / xtot * 1000 / ytot * 100 / 60;
|
|
|
|
var->height = -1;
|
|
var->width = -1;
|
|
|
|
if (var->bits_per_pixel > 8) {
|
|
var->red.offset = screen_info.red_pos;
|
|
var->red.length = screen_info.red_size;
|
|
var->green.offset = screen_info.green_pos;
|
|
var->green.length = screen_info.green_size;
|
|
var->blue.offset = screen_info.blue_pos;
|
|
var->blue.length = screen_info.blue_size;
|
|
var->transp.offset = screen_info.rsvd_pos;
|
|
var->transp.length = screen_info.rsvd_size;
|
|
} else {
|
|
var->red.length = 8;
|
|
var->green.length = 8;
|
|
var->blue.length = 8;
|
|
}
|
|
}
|
|
|
|
static int __devinit intelfb_init_var(struct intelfb_info *dinfo)
|
|
{
|
|
struct fb_var_screeninfo *var;
|
|
int msrc = 0;
|
|
|
|
DBG_MSG("intelfb_init_var\n");
|
|
|
|
var = &dinfo->info->var;
|
|
if (FIXED_MODE(dinfo)) {
|
|
memcpy(var, &dinfo->initial_var,
|
|
sizeof(struct fb_var_screeninfo));
|
|
msrc = 5;
|
|
} else {
|
|
const u8 *edid_s = fb_firmware_edid(&dinfo->pdev->dev);
|
|
u8 *edid_d = NULL;
|
|
|
|
if (edid_s) {
|
|
edid_d = kmemdup(edid_s, EDID_LENGTH, GFP_KERNEL);
|
|
|
|
if (edid_d) {
|
|
fb_edid_to_monspecs(edid_d,
|
|
&dinfo->info->monspecs);
|
|
kfree(edid_d);
|
|
}
|
|
}
|
|
|
|
if (mode) {
|
|
printk("intelfb: Looking for mode in private "
|
|
"database\n");
|
|
msrc = fb_find_mode(var, dinfo->info, mode,
|
|
dinfo->info->monspecs.modedb,
|
|
dinfo->info->monspecs.modedb_len,
|
|
NULL, 0);
|
|
|
|
if (msrc && msrc > 1) {
|
|
printk("intelfb: No mode in private database, "
|
|
"intelfb: looking for mode in global "
|
|
"database ");
|
|
msrc = fb_find_mode(var, dinfo->info, mode,
|
|
NULL, 0, NULL, 0);
|
|
|
|
if (msrc)
|
|
msrc |= 8;
|
|
}
|
|
|
|
}
|
|
|
|
if (!msrc)
|
|
msrc = fb_find_mode(var, dinfo->info, PREFERRED_MODE,
|
|
NULL, 0, NULL, 0);
|
|
}
|
|
|
|
if (!msrc) {
|
|
ERR_MSG("Cannot find a suitable video mode.\n");
|
|
return 1;
|
|
}
|
|
|
|
INF_MSG("Initial video mode is %dx%d-%d@%d.\n", var->xres, var->yres,
|
|
var->bits_per_pixel, var_to_refresh(var));
|
|
|
|
DBG_MSG("Initial video mode is from %d.\n", msrc);
|
|
|
|
#if ALLOCATE_FOR_PANNING
|
|
/* Allow use of half of the video ram for panning */
|
|
var->xres_virtual = var->xres;
|
|
var->yres_virtual =
|
|
dinfo->fb.size / 2 / (var->bits_per_pixel * var->xres);
|
|
if (var->yres_virtual < var->yres)
|
|
var->yres_virtual = var->yres;
|
|
#else
|
|
var->yres_virtual = var->yres;
|
|
#endif
|
|
|
|
if (dinfo->accel)
|
|
var->accel_flags |= FB_ACCELF_TEXT;
|
|
else
|
|
var->accel_flags &= ~FB_ACCELF_TEXT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit intelfb_set_fbinfo(struct intelfb_info *dinfo)
|
|
{
|
|
struct fb_info *info = dinfo->info;
|
|
|
|
DBG_MSG("intelfb_set_fbinfo\n");
|
|
|
|
info->flags = FBINFO_FLAG_DEFAULT;
|
|
info->fbops = &intel_fb_ops;
|
|
info->pseudo_palette = dinfo->pseudo_palette;
|
|
|
|
info->pixmap.size = 64*1024;
|
|
info->pixmap.buf_align = 8;
|
|
info->pixmap.access_align = 32;
|
|
info->pixmap.flags = FB_PIXMAP_SYSTEM;
|
|
|
|
if (intelfb_init_var(dinfo))
|
|
return 1;
|
|
|
|
info->pixmap.scan_align = 1;
|
|
strcpy(info->fix.id, dinfo->name);
|
|
info->fix.smem_start = dinfo->fb.physical;
|
|
info->fix.smem_len = dinfo->fb.size;
|
|
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
info->fix.type_aux = 0;
|
|
info->fix.xpanstep = 8;
|
|
info->fix.ypanstep = 1;
|
|
info->fix.ywrapstep = 0;
|
|
info->fix.mmio_start = dinfo->mmio_base_phys;
|
|
info->fix.mmio_len = INTEL_REG_SIZE;
|
|
info->fix.accel = FB_ACCEL_I830;
|
|
update_dinfo(dinfo, &info->var);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Update dinfo to match the active video mode. */
|
|
static void update_dinfo(struct intelfb_info *dinfo,
|
|
struct fb_var_screeninfo *var)
|
|
{
|
|
DBG_MSG("update_dinfo\n");
|
|
|
|
dinfo->bpp = var->bits_per_pixel;
|
|
dinfo->depth = intelfb_var_to_depth(var);
|
|
dinfo->xres = var->xres;
|
|
dinfo->yres = var->xres;
|
|
dinfo->pixclock = var->pixclock;
|
|
|
|
dinfo->info->fix.visual = dinfo->visual;
|
|
dinfo->info->fix.line_length = dinfo->pitch;
|
|
|
|
switch (dinfo->bpp) {
|
|
case 8:
|
|
dinfo->visual = FB_VISUAL_PSEUDOCOLOR;
|
|
dinfo->pitch = var->xres_virtual;
|
|
break;
|
|
case 16:
|
|
dinfo->visual = FB_VISUAL_TRUECOLOR;
|
|
dinfo->pitch = var->xres_virtual * 2;
|
|
break;
|
|
case 32:
|
|
dinfo->visual = FB_VISUAL_TRUECOLOR;
|
|
dinfo->pitch = var->xres_virtual * 4;
|
|
break;
|
|
}
|
|
|
|
/* Make sure the line length is a aligned correctly. */
|
|
if (IS_I9XX(dinfo))
|
|
dinfo->pitch = ROUND_UP_TO(dinfo->pitch, STRIDE_ALIGNMENT_I9XX);
|
|
else
|
|
dinfo->pitch = ROUND_UP_TO(dinfo->pitch, STRIDE_ALIGNMENT);
|
|
|
|
if (FIXED_MODE(dinfo))
|
|
dinfo->pitch = dinfo->initial_pitch;
|
|
|
|
dinfo->info->screen_base = (char __iomem *)dinfo->fb.virtual;
|
|
dinfo->info->fix.line_length = dinfo->pitch;
|
|
dinfo->info->fix.visual = dinfo->visual;
|
|
}
|
|
|
|
/* fbops functions */
|
|
|
|
/***************************************************************
|
|
* fbdev interface *
|
|
***************************************************************/
|
|
|
|
static int intelfb_open(struct fb_info *info, int user)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
if (user)
|
|
dinfo->open++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_release(struct fb_info *info, int user)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
if (user) {
|
|
dinfo->open--;
|
|
msleep(1);
|
|
if (!dinfo->open)
|
|
intelfbhw_disable_irq(dinfo);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
int change_var = 0;
|
|
struct fb_var_screeninfo v;
|
|
struct intelfb_info *dinfo;
|
|
static int first = 1;
|
|
int i;
|
|
/* Good pitches to allow tiling. Don't care about pitches < 1024. */
|
|
static const int pitches[] = {
|
|
128 * 8,
|
|
128 * 16,
|
|
128 * 32,
|
|
128 * 64,
|
|
0
|
|
};
|
|
|
|
DBG_MSG("intelfb_check_var: accel_flags is %d\n", var->accel_flags);
|
|
|
|
dinfo = GET_DINFO(info);
|
|
|
|
/* update the pitch */
|
|
if (intelfbhw_validate_mode(dinfo, var) != 0)
|
|
return -EINVAL;
|
|
|
|
v = *var;
|
|
|
|
for (i = 0; pitches[i] != 0; i++) {
|
|
if (pitches[i] >= v.xres_virtual) {
|
|
v.xres_virtual = pitches[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Check for a supported bpp. */
|
|
if (v.bits_per_pixel <= 8)
|
|
v.bits_per_pixel = 8;
|
|
else if (v.bits_per_pixel <= 16) {
|
|
if (v.bits_per_pixel == 16)
|
|
v.green.length = 6;
|
|
v.bits_per_pixel = 16;
|
|
} else if (v.bits_per_pixel <= 32)
|
|
v.bits_per_pixel = 32;
|
|
else
|
|
return -EINVAL;
|
|
|
|
change_var = ((info->var.xres != var->xres) ||
|
|
(info->var.yres != var->yres) ||
|
|
(info->var.xres_virtual != var->xres_virtual) ||
|
|
(info->var.yres_virtual != var->yres_virtual) ||
|
|
(info->var.bits_per_pixel != var->bits_per_pixel) ||
|
|
memcmp(&info->var.red, &var->red, sizeof(var->red)) ||
|
|
memcmp(&info->var.green, &var->green,
|
|
sizeof(var->green)) ||
|
|
memcmp(&info->var.blue, &var->blue, sizeof(var->blue)));
|
|
|
|
if (FIXED_MODE(dinfo) &&
|
|
(change_var ||
|
|
var->yres_virtual > dinfo->initial_var.yres_virtual ||
|
|
var->yres_virtual < dinfo->initial_var.yres ||
|
|
var->xoffset || var->nonstd)) {
|
|
if (first) {
|
|
ERR_MSG("Changing the video mode is not supported.\n");
|
|
first = 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (intelfb_var_to_depth(&v)) {
|
|
case 8:
|
|
v.red.offset = v.green.offset = v.blue.offset = 0;
|
|
v.red.length = v.green.length = v.blue.length = 8;
|
|
v.transp.offset = v.transp.length = 0;
|
|
break;
|
|
case 15:
|
|
v.red.offset = 10;
|
|
v.green.offset = 5;
|
|
v.blue.offset = 0;
|
|
v.red.length = v.green.length = v.blue.length = 5;
|
|
v.transp.offset = v.transp.length = 0;
|
|
break;
|
|
case 16:
|
|
v.red.offset = 11;
|
|
v.green.offset = 5;
|
|
v.blue.offset = 0;
|
|
v.red.length = 5;
|
|
v.green.length = 6;
|
|
v.blue.length = 5;
|
|
v.transp.offset = v.transp.length = 0;
|
|
break;
|
|
case 24:
|
|
v.red.offset = 16;
|
|
v.green.offset = 8;
|
|
v.blue.offset = 0;
|
|
v.red.length = v.green.length = v.blue.length = 8;
|
|
v.transp.offset = v.transp.length = 0;
|
|
break;
|
|
case 32:
|
|
v.red.offset = 16;
|
|
v.green.offset = 8;
|
|
v.blue.offset = 0;
|
|
v.red.length = v.green.length = v.blue.length = 8;
|
|
v.transp.offset = 24;
|
|
v.transp.length = 8;
|
|
break;
|
|
}
|
|
|
|
if (v.xoffset < 0)
|
|
v.xoffset = 0;
|
|
if (v.yoffset < 0)
|
|
v.yoffset = 0;
|
|
|
|
if (v.xoffset > v.xres_virtual - v.xres)
|
|
v.xoffset = v.xres_virtual - v.xres;
|
|
if (v.yoffset > v.yres_virtual - v.yres)
|
|
v.yoffset = v.yres_virtual - v.yres;
|
|
|
|
v.red.msb_right = v.green.msb_right = v.blue.msb_right =
|
|
v.transp.msb_right = 0;
|
|
|
|
*var = v;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_set_par(struct fb_info *info)
|
|
{
|
|
struct intelfb_hwstate *hw;
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
if (FIXED_MODE(dinfo)) {
|
|
ERR_MSG("Changing the video mode is not supported.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
hw = kmalloc(sizeof(*hw), GFP_ATOMIC);
|
|
if (!hw)
|
|
return -ENOMEM;
|
|
|
|
DBG_MSG("intelfb_set_par (%dx%d-%d)\n", info->var.xres,
|
|
info->var.yres, info->var.bits_per_pixel);
|
|
|
|
/*
|
|
* Disable VCO prior to timing register change.
|
|
*/
|
|
OUTREG(DPLL_A, INREG(DPLL_A) & ~DPLL_VCO_ENABLE);
|
|
|
|
intelfb_blank(FB_BLANK_POWERDOWN, info);
|
|
|
|
if (ACCEL(dinfo, info))
|
|
intelfbhw_2d_stop(dinfo);
|
|
|
|
memcpy(hw, &dinfo->save_state, sizeof(*hw));
|
|
if (intelfbhw_mode_to_hw(dinfo, hw, &info->var))
|
|
goto invalid_mode;
|
|
if (intelfbhw_program_mode(dinfo, hw, 0))
|
|
goto invalid_mode;
|
|
|
|
#if REGDUMP > 0
|
|
intelfbhw_read_hw_state(dinfo, hw, 0);
|
|
intelfbhw_print_hw_state(dinfo, hw);
|
|
#endif
|
|
|
|
update_dinfo(dinfo, &info->var);
|
|
|
|
if (ACCEL(dinfo, info))
|
|
intelfbhw_2d_start(dinfo);
|
|
|
|
intelfb_pan_display(&info->var, info);
|
|
|
|
intelfb_blank(FB_BLANK_UNBLANK, info);
|
|
|
|
if (ACCEL(dinfo, info)) {
|
|
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
|
|
FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
|
|
FBINFO_HWACCEL_IMAGEBLIT;
|
|
} else
|
|
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
|
|
|
|
kfree(hw);
|
|
return 0;
|
|
invalid_mode:
|
|
kfree(hw);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_setcolreg: regno %d, depth %d\n", regno, dinfo->depth);
|
|
#endif
|
|
|
|
if (regno > 255)
|
|
return 1;
|
|
|
|
if (dinfo->depth == 8) {
|
|
red >>= 8;
|
|
green >>= 8;
|
|
blue >>= 8;
|
|
|
|
intelfbhw_setcolreg(dinfo, regno, red, green, blue,
|
|
transp);
|
|
}
|
|
|
|
if (regno < 16) {
|
|
switch (dinfo->depth) {
|
|
case 15:
|
|
dinfo->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
|
|
((green & 0xf800) >> 6) |
|
|
((blue & 0xf800) >> 11);
|
|
break;
|
|
case 16:
|
|
dinfo->pseudo_palette[regno] = (red & 0xf800) |
|
|
((green & 0xfc00) >> 5) |
|
|
((blue & 0xf800) >> 11);
|
|
break;
|
|
case 24:
|
|
dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
|
|
(green & 0xff00) |
|
|
((blue & 0xff00) >> 8);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_blank(int blank, struct fb_info *info)
|
|
{
|
|
intelfbhw_do_blank(blank, info);
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
intelfbhw_pan_display(var, info);
|
|
return 0;
|
|
}
|
|
|
|
/* When/if we have our own ioctls. */
|
|
static int intelfb_ioctl(struct fb_info *info, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
int retval = 0;
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
u32 pipe = 0;
|
|
|
|
switch (cmd) {
|
|
case FBIO_WAITFORVSYNC:
|
|
if (get_user(pipe, (__u32 __user *)arg))
|
|
return -EFAULT;
|
|
|
|
retval = intelfbhw_wait_for_vsync(dinfo, pipe);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void intelfb_fillrect (struct fb_info *info,
|
|
const struct fb_fillrect *rect)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
u32 rop, color;
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_fillrect\n");
|
|
#endif
|
|
|
|
if (!ACCEL(dinfo, info) || dinfo->depth == 4) {
|
|
cfb_fillrect(info, rect);
|
|
return;
|
|
}
|
|
|
|
if (rect->rop == ROP_COPY)
|
|
rop = PAT_ROP_GXCOPY;
|
|
else /* ROP_XOR */
|
|
rop = PAT_ROP_GXXOR;
|
|
|
|
if (dinfo->depth != 8)
|
|
color = dinfo->pseudo_palette[rect->color];
|
|
else
|
|
color = rect->color;
|
|
|
|
intelfbhw_do_fillrect(dinfo, rect->dx, rect->dy,
|
|
rect->width, rect->height, color,
|
|
dinfo->pitch, info->var.bits_per_pixel,
|
|
rop);
|
|
}
|
|
|
|
static void intelfb_copyarea(struct fb_info *info,
|
|
const struct fb_copyarea *region)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_copyarea\n");
|
|
#endif
|
|
|
|
if (!ACCEL(dinfo, info) || dinfo->depth == 4) {
|
|
cfb_copyarea(info, region);
|
|
return;
|
|
}
|
|
|
|
intelfbhw_do_bitblt(dinfo, region->sx, region->sy, region->dx,
|
|
region->dy, region->width, region->height,
|
|
dinfo->pitch, info->var.bits_per_pixel);
|
|
}
|
|
|
|
static void intelfb_imageblit(struct fb_info *info,
|
|
const struct fb_image *image)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
u32 fgcolor, bgcolor;
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_imageblit\n");
|
|
#endif
|
|
|
|
if (!ACCEL(dinfo, info) || dinfo->depth == 4
|
|
|| image->depth != 1) {
|
|
cfb_imageblit(info, image);
|
|
return;
|
|
}
|
|
|
|
if (dinfo->depth != 8) {
|
|
fgcolor = dinfo->pseudo_palette[image->fg_color];
|
|
bgcolor = dinfo->pseudo_palette[image->bg_color];
|
|
} else {
|
|
fgcolor = image->fg_color;
|
|
bgcolor = image->bg_color;
|
|
}
|
|
|
|
if (!intelfbhw_do_drawglyph(dinfo, fgcolor, bgcolor, image->width,
|
|
image->height, image->data,
|
|
image->dx, image->dy,
|
|
dinfo->pitch, info->var.bits_per_pixel)) {
|
|
cfb_imageblit(info, image);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static int intelfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
u32 physical;
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_cursor\n");
|
|
#endif
|
|
|
|
if (!dinfo->hwcursor)
|
|
return -ENODEV;
|
|
|
|
intelfbhw_cursor_hide(dinfo);
|
|
|
|
/* If XFree killed the cursor - restore it */
|
|
physical = (dinfo->mobile || IS_I9XX(dinfo)) ? dinfo->cursor.physical :
|
|
(dinfo->cursor.offset << 12);
|
|
|
|
if (INREG(CURSOR_A_BASEADDR) != physical) {
|
|
u32 fg, bg;
|
|
|
|
DBG_MSG("the cursor was killed - restore it !!\n");
|
|
DBG_MSG("size %d, %d pos %d, %d\n",
|
|
cursor->image.width, cursor->image.height,
|
|
cursor->image.dx, cursor->image.dy);
|
|
|
|
intelfbhw_cursor_init(dinfo);
|
|
intelfbhw_cursor_reset(dinfo);
|
|
intelfbhw_cursor_setpos(dinfo, cursor->image.dx,
|
|
cursor->image.dy);
|
|
|
|
if (dinfo->depth != 8) {
|
|
fg =dinfo->pseudo_palette[cursor->image.fg_color];
|
|
bg =dinfo->pseudo_palette[cursor->image.bg_color];
|
|
} else {
|
|
fg = cursor->image.fg_color;
|
|
bg = cursor->image.bg_color;
|
|
}
|
|
intelfbhw_cursor_setcolor(dinfo, bg, fg);
|
|
intelfbhw_cursor_load(dinfo, cursor->image.width,
|
|
cursor->image.height,
|
|
dinfo->cursor_src);
|
|
|
|
if (cursor->enable)
|
|
intelfbhw_cursor_show(dinfo);
|
|
return 0;
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETPOS) {
|
|
u32 dx, dy;
|
|
|
|
dx = cursor->image.dx - info->var.xoffset;
|
|
dy = cursor->image.dy - info->var.yoffset;
|
|
|
|
intelfbhw_cursor_setpos(dinfo, dx, dy);
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETSIZE) {
|
|
if (cursor->image.width > 64 || cursor->image.height > 64)
|
|
return -ENXIO;
|
|
|
|
intelfbhw_cursor_reset(dinfo);
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETCMAP) {
|
|
u32 fg, bg;
|
|
|
|
if (dinfo->depth != 8) {
|
|
fg = dinfo->pseudo_palette[cursor->image.fg_color];
|
|
bg = dinfo->pseudo_palette[cursor->image.bg_color];
|
|
} else {
|
|
fg = cursor->image.fg_color;
|
|
bg = cursor->image.bg_color;
|
|
}
|
|
|
|
intelfbhw_cursor_setcolor(dinfo, bg, fg);
|
|
}
|
|
|
|
if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
|
|
u32 s_pitch = (ROUND_UP_TO(cursor->image.width, 8) / 8);
|
|
u32 size = s_pitch * cursor->image.height;
|
|
u8 *dat = (u8 *) cursor->image.data;
|
|
u8 *msk = (u8 *) cursor->mask;
|
|
u8 src[64];
|
|
u32 i;
|
|
|
|
if (cursor->image.depth != 1)
|
|
return -ENXIO;
|
|
|
|
switch (cursor->rop) {
|
|
case ROP_XOR:
|
|
for (i = 0; i < size; i++)
|
|
src[i] = dat[i] ^ msk[i];
|
|
break;
|
|
case ROP_COPY:
|
|
default:
|
|
for (i = 0; i < size; i++)
|
|
src[i] = dat[i] & msk[i];
|
|
break;
|
|
}
|
|
|
|
/* save the bitmap to restore it when XFree will
|
|
make the cursor dirty */
|
|
memcpy(dinfo->cursor_src, src, size);
|
|
|
|
intelfbhw_cursor_load(dinfo, cursor->image.width,
|
|
cursor->image.height, src);
|
|
}
|
|
|
|
if (cursor->enable)
|
|
intelfbhw_cursor_show(dinfo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_sync(struct fb_info *info)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_sync\n");
|
|
#endif
|
|
|
|
if (dinfo->ring_lockup)
|
|
return 0;
|
|
|
|
intelfbhw_do_sync(dinfo);
|
|
return 0;
|
|
}
|
|
|