0d3b710097
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/hwmon/lis3lv02d.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
582 lines
16 KiB
C
582 lines
16 KiB
C
/*
|
|
* lis3lv02d.c - ST LIS3LV02DL accelerometer driver
|
|
*
|
|
* Copyright (C) 2007-2008 Yan Burman
|
|
* Copyright (C) 2008 Eric Piel
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/input.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/semaphore.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/uaccess.h>
|
|
#include <acpi/acpi_drivers.h>
|
|
#include <asm/atomic.h>
|
|
#include "lis3lv02d.h"
|
|
|
|
#define DRIVER_NAME "lis3lv02d"
|
|
#define ACPI_MDPS_CLASS "accelerometer"
|
|
|
|
/* joystick device poll interval in milliseconds */
|
|
#define MDPS_POLL_INTERVAL 50
|
|
/*
|
|
* The sensor can also generate interrupts (DRDY) but it's pretty pointless
|
|
* because their are generated even if the data do not change. So it's better
|
|
* to keep the interrupt for the free-fall event. The values are updated at
|
|
* 40Hz (at the lowest frequency), but as it can be pretty time consuming on
|
|
* some low processor, we poll the sensor only at 20Hz... enough for the
|
|
* joystick.
|
|
*/
|
|
|
|
/* Maximum value our axis may get for the input device (signed 12 bits) */
|
|
#define MDPS_MAX_VAL 2048
|
|
|
|
struct axis_conversion {
|
|
s8 x;
|
|
s8 y;
|
|
s8 z;
|
|
};
|
|
|
|
struct acpi_lis3lv02d {
|
|
struct acpi_device *device; /* The ACPI device */
|
|
struct input_dev *idev; /* input device */
|
|
struct task_struct *kthread; /* kthread for input */
|
|
struct mutex lock;
|
|
struct platform_device *pdev; /* platform device */
|
|
atomic_t count; /* interrupt count after last read */
|
|
int xcalib; /* calibrated null value for x */
|
|
int ycalib; /* calibrated null value for y */
|
|
int zcalib; /* calibrated null value for z */
|
|
unsigned char is_on; /* whether the device is on or off */
|
|
unsigned char usage; /* usage counter */
|
|
struct axis_conversion ac; /* hw -> logical axis */
|
|
};
|
|
|
|
static struct acpi_lis3lv02d adev;
|
|
|
|
static int lis3lv02d_remove_fs(void);
|
|
static int lis3lv02d_add_fs(struct acpi_device *device);
|
|
|
|
/* For automatic insertion of the module */
|
|
static struct acpi_device_id lis3lv02d_device_ids[] = {
|
|
{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
|
|
{"", 0},
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
|
|
|
|
/**
|
|
* lis3lv02d_acpi_init - ACPI _INI method: initialize the device.
|
|
* @handle: the handle of the device
|
|
*
|
|
* Returns AE_OK on success.
|
|
*/
|
|
static inline acpi_status lis3lv02d_acpi_init(acpi_handle handle)
|
|
{
|
|
return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL);
|
|
}
|
|
|
|
/**
|
|
* lis3lv02d_acpi_read - ACPI ALRD method: read a register
|
|
* @handle: the handle of the device
|
|
* @reg: the register to read
|
|
* @ret: result of the operation
|
|
*
|
|
* Returns AE_OK on success.
|
|
*/
|
|
static acpi_status lis3lv02d_acpi_read(acpi_handle handle, int reg, u8 *ret)
|
|
{
|
|
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
|
|
struct acpi_object_list args = { 1, &arg0 };
|
|
unsigned long long lret;
|
|
acpi_status status;
|
|
|
|
arg0.integer.value = reg;
|
|
|
|
status = acpi_evaluate_integer(handle, "ALRD", &args, &lret);
|
|
*ret = lret;
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* lis3lv02d_acpi_write - ACPI ALWR method: write to a register
|
|
* @handle: the handle of the device
|
|
* @reg: the register to write to
|
|
* @val: the value to write
|
|
*
|
|
* Returns AE_OK on success.
|
|
*/
|
|
static acpi_status lis3lv02d_acpi_write(acpi_handle handle, int reg, u8 val)
|
|
{
|
|
unsigned long long ret; /* Not used when writting */
|
|
union acpi_object in_obj[2];
|
|
struct acpi_object_list args = { 2, in_obj };
|
|
|
|
in_obj[0].type = ACPI_TYPE_INTEGER;
|
|
in_obj[0].integer.value = reg;
|
|
in_obj[1].type = ACPI_TYPE_INTEGER;
|
|
in_obj[1].integer.value = val;
|
|
|
|
return acpi_evaluate_integer(handle, "ALWR", &args, &ret);
|
|
}
|
|
|
|
static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
|
|
{
|
|
u8 lo, hi;
|
|
|
|
lis3lv02d_acpi_read(handle, reg, &lo);
|
|
lis3lv02d_acpi_read(handle, reg + 1, &hi);
|
|
/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
|
|
return (s16)((hi << 8) | lo);
|
|
}
|
|
|
|
/**
|
|
* lis3lv02d_get_axis - For the given axis, give the value converted
|
|
* @axis: 1,2,3 - can also be negative
|
|
* @hw_values: raw values returned by the hardware
|
|
*
|
|
* Returns the converted value.
|
|
*/
|
|
static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3])
|
|
{
|
|
if (axis > 0)
|
|
return hw_values[axis - 1];
|
|
else
|
|
return -hw_values[-axis - 1];
|
|
}
|
|
|
|
/**
|
|
* lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer
|
|
* @handle: the handle to the device
|
|
* @x: where to store the X axis value
|
|
* @y: where to store the Y axis value
|
|
* @z: where to store the Z axis value
|
|
*
|
|
* Note that 40Hz input device can eat up about 10% CPU at 800MHZ
|
|
*/
|
|
static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
|
|
{
|
|
int position[3];
|
|
|
|
position[0] = lis3lv02d_read_16(handle, OUTX_L);
|
|
position[1] = lis3lv02d_read_16(handle, OUTY_L);
|
|
position[2] = lis3lv02d_read_16(handle, OUTZ_L);
|
|
|
|
*x = lis3lv02d_get_axis(adev.ac.x, position);
|
|
*y = lis3lv02d_get_axis(adev.ac.y, position);
|
|
*z = lis3lv02d_get_axis(adev.ac.z, position);
|
|
}
|
|
|
|
static inline void lis3lv02d_poweroff(acpi_handle handle)
|
|
{
|
|
adev.is_on = 0;
|
|
/* disable X,Y,Z axis and power down */
|
|
lis3lv02d_acpi_write(handle, CTRL_REG1, 0x00);
|
|
}
|
|
|
|
static void lis3lv02d_poweron(acpi_handle handle)
|
|
{
|
|
u8 val;
|
|
|
|
adev.is_on = 1;
|
|
lis3lv02d_acpi_init(handle);
|
|
lis3lv02d_acpi_write(handle, FF_WU_CFG, 0);
|
|
/*
|
|
* BDU: LSB and MSB values are not updated until both have been read.
|
|
* So the value read will always be correct.
|
|
* IEN: Interrupt for free-fall and DD, not for data-ready.
|
|
*/
|
|
lis3lv02d_acpi_read(handle, CTRL_REG2, &val);
|
|
val |= CTRL2_BDU | CTRL2_IEN;
|
|
lis3lv02d_acpi_write(handle, CTRL_REG2, val);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state)
|
|
{
|
|
/* make sure the device is off when we suspend */
|
|
lis3lv02d_poweroff(device->handle);
|
|
return 0;
|
|
}
|
|
|
|
static int lis3lv02d_resume(struct acpi_device *device)
|
|
{
|
|
/* put back the device in the right state (ACPI might turn it on) */
|
|
mutex_lock(&adev.lock);
|
|
if (adev.usage > 0)
|
|
lis3lv02d_poweron(device->handle);
|
|
else
|
|
lis3lv02d_poweroff(device->handle);
|
|
mutex_unlock(&adev.lock);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define lis3lv02d_suspend NULL
|
|
#define lis3lv02d_resume NULL
|
|
#endif
|
|
|
|
|
|
/*
|
|
* To be called before starting to use the device. It makes sure that the
|
|
* device will always be on until a call to lis3lv02d_decrease_use(). Not to be
|
|
* used from interrupt context.
|
|
*/
|
|
static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev)
|
|
{
|
|
mutex_lock(&dev->lock);
|
|
dev->usage++;
|
|
if (dev->usage == 1) {
|
|
if (!dev->is_on)
|
|
lis3lv02d_poweron(dev->device->handle);
|
|
}
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
/*
|
|
* To be called whenever a usage of the device is stopped.
|
|
* It will make sure to turn off the device when there is not usage.
|
|
*/
|
|
static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev)
|
|
{
|
|
mutex_lock(&dev->lock);
|
|
dev->usage--;
|
|
if (dev->usage == 0)
|
|
lis3lv02d_poweroff(dev->device->handle);
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
/**
|
|
* lis3lv02d_joystick_kthread - Kthread polling function
|
|
* @data: unused - here to conform to threadfn prototype
|
|
*/
|
|
static int lis3lv02d_joystick_kthread(void *data)
|
|
{
|
|
int x, y, z;
|
|
|
|
while (!kthread_should_stop()) {
|
|
lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z);
|
|
input_report_abs(adev.idev, ABS_X, x - adev.xcalib);
|
|
input_report_abs(adev.idev, ABS_Y, y - adev.ycalib);
|
|
input_report_abs(adev.idev, ABS_Z, z - adev.zcalib);
|
|
|
|
input_sync(adev.idev);
|
|
|
|
try_to_freeze();
|
|
msleep_interruptible(MDPS_POLL_INTERVAL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lis3lv02d_joystick_open(struct input_dev *input)
|
|
{
|
|
lis3lv02d_increase_use(&adev);
|
|
adev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d");
|
|
if (IS_ERR(adev.kthread)) {
|
|
lis3lv02d_decrease_use(&adev);
|
|
return PTR_ERR(adev.kthread);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lis3lv02d_joystick_close(struct input_dev *input)
|
|
{
|
|
kthread_stop(adev.kthread);
|
|
lis3lv02d_decrease_use(&adev);
|
|
}
|
|
|
|
|
|
static inline void lis3lv02d_calibrate_joystick(void)
|
|
{
|
|
lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
|
|
}
|
|
|
|
static int lis3lv02d_joystick_enable(void)
|
|
{
|
|
int err;
|
|
|
|
if (adev.idev)
|
|
return -EINVAL;
|
|
|
|
adev.idev = input_allocate_device();
|
|
if (!adev.idev)
|
|
return -ENOMEM;
|
|
|
|
lis3lv02d_calibrate_joystick();
|
|
|
|
adev.idev->name = "ST LIS3LV02DL Accelerometer";
|
|
adev.idev->phys = DRIVER_NAME "/input0";
|
|
adev.idev->id.bustype = BUS_HOST;
|
|
adev.idev->id.vendor = 0;
|
|
adev.idev->dev.parent = &adev.pdev->dev;
|
|
adev.idev->open = lis3lv02d_joystick_open;
|
|
adev.idev->close = lis3lv02d_joystick_close;
|
|
|
|
set_bit(EV_ABS, adev.idev->evbit);
|
|
input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
|
|
input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
|
|
input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
|
|
|
|
err = input_register_device(adev.idev);
|
|
if (err) {
|
|
input_free_device(adev.idev);
|
|
adev.idev = NULL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void lis3lv02d_joystick_disable(void)
|
|
{
|
|
if (!adev.idev)
|
|
return;
|
|
|
|
input_unregister_device(adev.idev);
|
|
adev.idev = NULL;
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialise the accelerometer and the various subsystems.
|
|
* Should be rather independant of the bus system.
|
|
*/
|
|
static int lis3lv02d_init_device(struct acpi_lis3lv02d *dev)
|
|
{
|
|
mutex_init(&dev->lock);
|
|
lis3lv02d_add_fs(dev->device);
|
|
lis3lv02d_increase_use(dev);
|
|
|
|
if (lis3lv02d_joystick_enable())
|
|
printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
|
|
|
|
lis3lv02d_decrease_use(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi)
|
|
{
|
|
adev.ac = *((struct axis_conversion *)dmi->driver_data);
|
|
printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Represents, for each axis seen by userspace, the corresponding hw axis (+1).
|
|
* If the value is negative, the opposite of the hw value is used. */
|
|
static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3};
|
|
static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3};
|
|
static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
|
|
static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
|
|
static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
|
|
static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
|
|
|
|
#define AXIS_DMI_MATCH(_ident, _name, _axis) { \
|
|
.ident = _ident, \
|
|
.callback = lis3lv02d_dmi_matched, \
|
|
.matches = { \
|
|
DMI_MATCH(DMI_PRODUCT_NAME, _name) \
|
|
}, \
|
|
.driver_data = &lis3lv02d_axis_##_axis \
|
|
}
|
|
static struct dmi_system_id lis3lv02d_dmi_ids[] = {
|
|
/* product names are truncated to match all kinds of a same model */
|
|
AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
|
|
AXIS_DMI_MATCH("NC84x0", "HP Compaq nc84", z_inverted),
|
|
AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted),
|
|
AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted),
|
|
AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
|
|
AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
|
|
AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
|
|
{ NULL, }
|
|
/* Laptop models without axis info (yet):
|
|
* "NC651xx" "HP Compaq 651"
|
|
* "NC671xx" "HP Compaq 671"
|
|
* "NC6910" "HP Compaq 6910"
|
|
* HP Compaq 8710x Notebook PC / Mobile Workstation
|
|
* "NC2400" "HP Compaq nc2400"
|
|
* "NX74x0" "HP Compaq nx74"
|
|
* "NX6325" "HP Compaq nx6325"
|
|
* "NC4400" "HP Compaq nc4400"
|
|
*/
|
|
};
|
|
|
|
static int lis3lv02d_add(struct acpi_device *device)
|
|
{
|
|
u8 val;
|
|
|
|
if (!device)
|
|
return -EINVAL;
|
|
|
|
adev.device = device;
|
|
strcpy(acpi_device_name(device), DRIVER_NAME);
|
|
strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
|
|
device->driver_data = &adev;
|
|
|
|
lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val);
|
|
if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) {
|
|
printk(KERN_ERR DRIVER_NAME
|
|
": Accelerometer chip not LIS3LV02D{L,Q}\n");
|
|
}
|
|
|
|
/* If possible use a "standard" axes order */
|
|
if (dmi_check_system(lis3lv02d_dmi_ids) == 0) {
|
|
printk(KERN_INFO DRIVER_NAME ": laptop model unknown, "
|
|
"using default axes configuration\n");
|
|
adev.ac = lis3lv02d_axis_normal;
|
|
}
|
|
|
|
return lis3lv02d_init_device(&adev);
|
|
}
|
|
|
|
static int lis3lv02d_remove(struct acpi_device *device, int type)
|
|
{
|
|
if (!device)
|
|
return -EINVAL;
|
|
|
|
lis3lv02d_joystick_disable();
|
|
lis3lv02d_poweroff(device->handle);
|
|
|
|
return lis3lv02d_remove_fs();
|
|
}
|
|
|
|
|
|
/* Sysfs stuff */
|
|
static ssize_t lis3lv02d_position_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int x, y, z;
|
|
|
|
lis3lv02d_increase_use(&adev);
|
|
lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z);
|
|
lis3lv02d_decrease_use(&adev);
|
|
return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
|
|
}
|
|
|
|
static ssize_t lis3lv02d_calibrate_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "(%d,%d,%d)\n", adev.xcalib, adev.ycalib, adev.zcalib);
|
|
}
|
|
|
|
static ssize_t lis3lv02d_calibrate_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
lis3lv02d_increase_use(&adev);
|
|
lis3lv02d_calibrate_joystick();
|
|
lis3lv02d_decrease_use(&adev);
|
|
return count;
|
|
}
|
|
|
|
/* conversion btw sampling rate and the register values */
|
|
static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560};
|
|
static ssize_t lis3lv02d_rate_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
u8 ctrl;
|
|
int val;
|
|
|
|
lis3lv02d_increase_use(&adev);
|
|
lis3lv02d_acpi_read(adev.device->handle, CTRL_REG1, &ctrl);
|
|
lis3lv02d_decrease_use(&adev);
|
|
val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
|
|
return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
|
|
}
|
|
|
|
static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL);
|
|
static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show,
|
|
lis3lv02d_calibrate_store);
|
|
static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL);
|
|
|
|
static struct attribute *lis3lv02d_attributes[] = {
|
|
&dev_attr_position.attr,
|
|
&dev_attr_calibrate.attr,
|
|
&dev_attr_rate.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group lis3lv02d_attribute_group = {
|
|
.attrs = lis3lv02d_attributes
|
|
};
|
|
|
|
static int lis3lv02d_add_fs(struct acpi_device *device)
|
|
{
|
|
adev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
|
|
if (IS_ERR(adev.pdev))
|
|
return PTR_ERR(adev.pdev);
|
|
|
|
return sysfs_create_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group);
|
|
}
|
|
|
|
static int lis3lv02d_remove_fs(void)
|
|
{
|
|
sysfs_remove_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group);
|
|
platform_device_unregister(adev.pdev);
|
|
return 0;
|
|
}
|
|
|
|
/* For the HP MDPS aka 3D Driveguard */
|
|
static struct acpi_driver lis3lv02d_driver = {
|
|
.name = DRIVER_NAME,
|
|
.class = ACPI_MDPS_CLASS,
|
|
.ids = lis3lv02d_device_ids,
|
|
.ops = {
|
|
.add = lis3lv02d_add,
|
|
.remove = lis3lv02d_remove,
|
|
.suspend = lis3lv02d_suspend,
|
|
.resume = lis3lv02d_resume,
|
|
}
|
|
};
|
|
|
|
static int __init lis3lv02d_init_module(void)
|
|
{
|
|
int ret;
|
|
|
|
if (acpi_disabled)
|
|
return -ENODEV;
|
|
|
|
ret = acpi_bus_register_driver(&lis3lv02d_driver);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit lis3lv02d_exit_module(void)
|
|
{
|
|
acpi_bus_unregister_driver(&lis3lv02d_driver);
|
|
}
|
|
|
|
MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
|
|
MODULE_AUTHOR("Yan Burman and Eric Piel");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(lis3lv02d_init_module);
|
|
module_exit(lis3lv02d_exit_module);
|