1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
299 lines
6.3 KiB
C
299 lines
6.3 KiB
C
/*
|
|
* ibm_ocp_phy.c
|
|
*
|
|
* PHY drivers for the ibm ocp ethernet driver. Borrowed
|
|
* from sungem_phy.c, though I only kept the generic MII
|
|
* driver for now.
|
|
*
|
|
* This file should be shared with other drivers or eventually
|
|
* merged as the "low level" part of miilib
|
|
*
|
|
* (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
|
|
*
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/types.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "ibm_emac_phy.h"
|
|
|
|
static int reset_one_mii_phy(struct mii_phy *phy, int phy_id)
|
|
{
|
|
u16 val;
|
|
int limit = 10000;
|
|
|
|
val = __phy_read(phy, phy_id, MII_BMCR);
|
|
val &= ~BMCR_ISOLATE;
|
|
val |= BMCR_RESET;
|
|
__phy_write(phy, phy_id, MII_BMCR, val);
|
|
|
|
udelay(100);
|
|
|
|
while (limit--) {
|
|
val = __phy_read(phy, phy_id, MII_BMCR);
|
|
if ((val & BMCR_RESET) == 0)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
if ((val & BMCR_ISOLATE) && limit > 0)
|
|
__phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
|
|
|
|
return (limit <= 0);
|
|
}
|
|
|
|
static int cis8201_init(struct mii_phy *phy)
|
|
{
|
|
u16 epcr;
|
|
|
|
epcr = phy_read(phy, MII_CIS8201_EPCR);
|
|
epcr &= ~EPCR_MODE_MASK;
|
|
|
|
switch (phy->mode) {
|
|
case PHY_MODE_TBI:
|
|
epcr |= EPCR_TBI_MODE;
|
|
break;
|
|
case PHY_MODE_RTBI:
|
|
epcr |= EPCR_RTBI_MODE;
|
|
break;
|
|
case PHY_MODE_GMII:
|
|
epcr |= EPCR_GMII_MODE;
|
|
break;
|
|
case PHY_MODE_RGMII:
|
|
default:
|
|
epcr |= EPCR_RGMII_MODE;
|
|
}
|
|
|
|
phy_write(phy, MII_CIS8201_EPCR, epcr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
|
|
{
|
|
u16 ctl, adv;
|
|
|
|
phy->autoneg = 1;
|
|
phy->speed = SPEED_10;
|
|
phy->duplex = DUPLEX_HALF;
|
|
phy->pause = 0;
|
|
phy->advertising = advertise;
|
|
|
|
/* Setup standard advertise */
|
|
adv = phy_read(phy, MII_ADVERTISE);
|
|
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
|
|
if (advertise & ADVERTISED_10baseT_Half)
|
|
adv |= ADVERTISE_10HALF;
|
|
if (advertise & ADVERTISED_10baseT_Full)
|
|
adv |= ADVERTISE_10FULL;
|
|
if (advertise & ADVERTISED_100baseT_Half)
|
|
adv |= ADVERTISE_100HALF;
|
|
if (advertise & ADVERTISED_100baseT_Full)
|
|
adv |= ADVERTISE_100FULL;
|
|
phy_write(phy, MII_ADVERTISE, adv);
|
|
|
|
/* Start/Restart aneg */
|
|
ctl = phy_read(phy, MII_BMCR);
|
|
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
|
|
phy_write(phy, MII_BMCR, ctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
|
|
{
|
|
u16 ctl;
|
|
|
|
phy->autoneg = 0;
|
|
phy->speed = speed;
|
|
phy->duplex = fd;
|
|
phy->pause = 0;
|
|
|
|
ctl = phy_read(phy, MII_BMCR);
|
|
ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
|
|
|
|
/* First reset the PHY */
|
|
phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
|
|
|
|
/* Select speed & duplex */
|
|
switch (speed) {
|
|
case SPEED_10:
|
|
break;
|
|
case SPEED_100:
|
|
ctl |= BMCR_SPEED100;
|
|
break;
|
|
case SPEED_1000:
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
if (fd == DUPLEX_FULL)
|
|
ctl |= BMCR_FULLDPLX;
|
|
phy_write(phy, MII_BMCR, ctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int genmii_poll_link(struct mii_phy *phy)
|
|
{
|
|
u16 status;
|
|
|
|
(void)phy_read(phy, MII_BMSR);
|
|
status = phy_read(phy, MII_BMSR);
|
|
if ((status & BMSR_LSTATUS) == 0)
|
|
return 0;
|
|
if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
#define MII_CIS8201_ACSR 0x1c
|
|
#define ACSR_DUPLEX_STATUS 0x0020
|
|
#define ACSR_SPEED_1000BASET 0x0010
|
|
#define ACSR_SPEED_100BASET 0x0008
|
|
|
|
static int cis8201_read_link(struct mii_phy *phy)
|
|
{
|
|
u16 acsr;
|
|
|
|
if (phy->autoneg) {
|
|
acsr = phy_read(phy, MII_CIS8201_ACSR);
|
|
|
|
if (acsr & ACSR_DUPLEX_STATUS)
|
|
phy->duplex = DUPLEX_FULL;
|
|
else
|
|
phy->duplex = DUPLEX_HALF;
|
|
if (acsr & ACSR_SPEED_1000BASET) {
|
|
phy->speed = SPEED_1000;
|
|
} else if (acsr & ACSR_SPEED_100BASET)
|
|
phy->speed = SPEED_100;
|
|
else
|
|
phy->speed = SPEED_10;
|
|
phy->pause = 0;
|
|
}
|
|
/* On non-aneg, we assume what we put in BMCR is the speed,
|
|
* though magic-aneg shouldn't prevent this case from occurring
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int genmii_read_link(struct mii_phy *phy)
|
|
{
|
|
u16 lpa;
|
|
|
|
if (phy->autoneg) {
|
|
lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
|
|
|
|
phy->speed = SPEED_10;
|
|
phy->duplex = DUPLEX_HALF;
|
|
phy->pause = 0;
|
|
|
|
if (lpa & (LPA_100FULL | LPA_100HALF)) {
|
|
phy->speed = SPEED_100;
|
|
if (lpa & LPA_100FULL)
|
|
phy->duplex = DUPLEX_FULL;
|
|
} else if (lpa & LPA_10FULL)
|
|
phy->duplex = DUPLEX_FULL;
|
|
}
|
|
/* On non-aneg, we assume what we put in BMCR is the speed,
|
|
* though magic-aneg shouldn't prevent this case from occurring
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
|
|
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
|
|
SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
|
|
#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
|
|
SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
|
|
|
|
/* CIS8201 phy ops */
|
|
static struct mii_phy_ops cis8201_phy_ops = {
|
|
init:cis8201_init,
|
|
setup_aneg:genmii_setup_aneg,
|
|
setup_forced:genmii_setup_forced,
|
|
poll_link:genmii_poll_link,
|
|
read_link:cis8201_read_link
|
|
};
|
|
|
|
/* Generic implementation for most 10/100 PHYs */
|
|
static struct mii_phy_ops generic_phy_ops = {
|
|
setup_aneg:genmii_setup_aneg,
|
|
setup_forced:genmii_setup_forced,
|
|
poll_link:genmii_poll_link,
|
|
read_link:genmii_read_link
|
|
};
|
|
|
|
static struct mii_phy_def cis8201_phy_def = {
|
|
phy_id:0x000fc410,
|
|
phy_id_mask:0x000ffff0,
|
|
name:"CIS8201 Gigabit Ethernet",
|
|
features:MII_GBIT_FEATURES,
|
|
magic_aneg:0,
|
|
ops:&cis8201_phy_ops
|
|
};
|
|
|
|
static struct mii_phy_def genmii_phy_def = {
|
|
phy_id:0x00000000,
|
|
phy_id_mask:0x00000000,
|
|
name:"Generic MII",
|
|
features:MII_BASIC_FEATURES,
|
|
magic_aneg:0,
|
|
ops:&generic_phy_ops
|
|
};
|
|
|
|
static struct mii_phy_def *mii_phy_table[] = {
|
|
&cis8201_phy_def,
|
|
&genmii_phy_def,
|
|
NULL
|
|
};
|
|
|
|
int mii_phy_probe(struct mii_phy *phy, int mii_id)
|
|
{
|
|
int rc;
|
|
u32 id;
|
|
struct mii_phy_def *def;
|
|
int i;
|
|
|
|
phy->autoneg = 0;
|
|
phy->advertising = 0;
|
|
phy->mii_id = mii_id;
|
|
phy->speed = 0;
|
|
phy->duplex = 0;
|
|
phy->pause = 0;
|
|
|
|
/* Take PHY out of isloate mode and reset it. */
|
|
rc = reset_one_mii_phy(phy, mii_id);
|
|
if (rc)
|
|
return -ENODEV;
|
|
|
|
/* Read ID and find matching entry */
|
|
id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2))
|
|
& 0xfffffff0;
|
|
for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
|
|
if ((id & def->phy_id_mask) == def->phy_id)
|
|
break;
|
|
/* Should never be NULL (we have a generic entry), but... */
|
|
if (def == NULL)
|
|
return -ENODEV;
|
|
|
|
phy->def = def;
|
|
|
|
/* Setup default advertising */
|
|
phy->advertising = def->features;
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|