davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
11d686e956
kernel-ark/drivers/rtc/rtc-sirfsoc.c
Xianglong Du 3916b09eed drivers/rtc/rtc-sirfsoc.c: fix kernel panic of backing from hibernation 
RTC settings will be lost if power supply is cut off after hibernation
finished, but the current "restore" function does not restore RTC related
settings, this causes rtc_read_time failure and kernel panic:

  rtc rtc0: **** DPM device timeout ****
  Stack trace:
    unwind_backtrace+0x0/0xf4
    show_stack+0x10/0x14
    dpm_wd_handler+0x24/0x28
    call_timer_fn.isra.33+0x24/0x88
    run_timer_softirq+0x178/0x1f0
    __do_softirq+0x120/0x200
    do_softirq+0x54/0x5c
    irq_exit+0x9c/0xd0
    handle_IRQ+0x44/0x90
    __irq_svc+0x40/0x70
    _raw_spin_unlock_irqrestore+0x10/0x48
    sirfsoc_rtc_iobrg_readl+0x34/0x3c
    sirfsoc_rtc_read_time+0x24/0x48
    __rtc_read_time.isra.3+0x48/0x5c
    rtc_read_time+0x30/0x44
    rtc_resume.part.9+0x20/0x104
    rtc_resume+0x5c/0x64
    dpm_run_callback.isra.4+0x2c/0x74
    device_resume+0x9c/0x144
    dpm_resume+0x100/0x224
    hibernation_snapshot+0x170/0x398
    hibernate+0x13c/0x1d8
    state_store+0xb4/0xb8
    kobj_attr_store+0x14/0x20
    sysfs_write_file+0x160/0x190
    vfs_write+0xb4/0x194
    SyS_write+0x3c/0x78

this patch uses SIMPLE_DEV_PM_OPS() to make restore() execute the
existing resume() function which will restore the set of RTC.

Signed-off-by: Xianglong Du <Xianglong.Du@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:19 -07:00

424 lines
11 KiB
C
Raw Blame History

/*
* SiRFSoC Real Time Clock interface for Linux
*
* Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/module.h>
#include <linux/err.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/rtc/sirfsoc_rtciobrg.h>
#define RTC_CN 0x00
#define RTC_ALARM0 0x04
#define RTC_ALARM1 0x18
#define RTC_STATUS 0x08
#define RTC_SW_VALUE 0x40
#define SIRFSOC_RTC_AL1E (1<<6)
#define SIRFSOC_RTC_AL1 (1<<4)
#define SIRFSOC_RTC_HZE (1<<3)
#define SIRFSOC_RTC_AL0E (1<<2)
#define SIRFSOC_RTC_HZ (1<<1)
#define SIRFSOC_RTC_AL0 (1<<0)
#define RTC_DIV 0x0c
#define RTC_DEEP_CTRL 0x14
#define RTC_CLOCK_SWITCH 0x1c
#define SIRFSOC_RTC_CLK 0x03 /* others are reserved */
/* Refer to RTC DIV switch */
#define RTC_HZ 16
/* This macro is also defined in arch/arm/plat-sirfsoc/cpu.c */
#define RTC_SHIFT 4
#define INTR_SYSRTC_CN 0x48
struct sirfsoc_rtc_drv {
struct rtc_device *rtc;
u32 rtc_base;
u32 irq;
unsigned irq_wake;
/* Overflow for every 8 years extra time */
u32 overflow_rtc;
#ifdef CONFIG_PM
u32 saved_counter;
u32 saved_overflow_rtc;
#endif
};
static int sirfsoc_rtc_read_alarm(struct device *dev,
struct rtc_wkalrm *alrm)
{
unsigned long rtc_alarm, rtc_count;
struct sirfsoc_rtc_drv *rtcdrv;
rtcdrv = dev_get_drvdata(dev);
local_irq_disable();
rtc_count = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
rtc_alarm = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_ALARM0);
memset(alrm, 0, sizeof(struct rtc_wkalrm));
/*
* assume alarm interval not beyond one round counter overflow_rtc:
* 0->0xffffffff
*/
/* if alarm is in next overflow cycle */
if (rtc_count > rtc_alarm)
rtc_time_to_tm((rtcdrv->overflow_rtc + 1)
<< (BITS_PER_LONG - RTC_SHIFT)
| rtc_alarm >> RTC_SHIFT, &(alrm->time));
else
rtc_time_to_tm(rtcdrv->overflow_rtc
<< (BITS_PER_LONG - RTC_SHIFT)
| rtc_alarm >> RTC_SHIFT, &(alrm->time));
if (sirfsoc_rtc_iobrg_readl(
rtcdrv->rtc_base + RTC_STATUS) & SIRFSOC_RTC_AL0E)
alrm->enabled = 1;
local_irq_enable();
return 0;
}
static int sirfsoc_rtc_set_alarm(struct device *dev,
struct rtc_wkalrm *alrm)
{
unsigned long rtc_status_reg, rtc_alarm;
struct sirfsoc_rtc_drv *rtcdrv;
rtcdrv = dev_get_drvdata(dev);
if (alrm->enabled) {
rtc_tm_to_time(&(alrm->time), &rtc_alarm);
local_irq_disable();
rtc_status_reg = sirfsoc_rtc_iobrg_readl(
rtcdrv->rtc_base + RTC_STATUS);
if (rtc_status_reg & SIRFSOC_RTC_AL0E) {
/*
* An ongoing alarm in progress - ingore it and not
* to return EBUSY
*/
dev_info(dev, "An old alarm was set, will be replaced by a new one\n");
}
sirfsoc_rtc_iobrg_writel(
rtc_alarm << RTC_SHIFT, rtcdrv->rtc_base + RTC_ALARM0);
rtc_status_reg &= ~0x07; /* mask out the lower status bits */
/*
* This bit RTC_AL sets it as a wake-up source for Sleep Mode
* Writing 1 into this bit will clear it
*/
rtc_status_reg |= SIRFSOC_RTC_AL0;
/* enable the RTC alarm interrupt */
rtc_status_reg |= SIRFSOC_RTC_AL0E;
sirfsoc_rtc_iobrg_writel(
rtc_status_reg, rtcdrv->rtc_base + RTC_STATUS);
local_irq_enable();
} else {
/*
* if this function was called with enabled=0
* then it could mean that the application is
* trying to cancel an ongoing alarm
*/
local_irq_disable();
rtc_status_reg = sirfsoc_rtc_iobrg_readl(
rtcdrv->rtc_base + RTC_STATUS);
if (rtc_status_reg & SIRFSOC_RTC_AL0E) {
/* clear the RTC status register's alarm bit */
rtc_status_reg &= ~0x07;
/* write 1 into SIRFSOC_RTC_AL0 to force a clear */
rtc_status_reg |= (SIRFSOC_RTC_AL0);
/* Clear the Alarm enable bit */
rtc_status_reg &= ~(SIRFSOC_RTC_AL0E);
sirfsoc_rtc_iobrg_writel(rtc_status_reg,
rtcdrv->rtc_base + RTC_STATUS);
}
local_irq_enable();
}
return 0;
}
static int sirfsoc_rtc_read_time(struct device *dev,
struct rtc_time *tm)
{
unsigned long tmp_rtc = 0;
struct sirfsoc_rtc_drv *rtcdrv;
rtcdrv = dev_get_drvdata(dev);
/*
* This patch is taken from WinCE - Need to validate this for
* correctness. To work around sirfsoc RTC counter double sync logic
* fail, read several times to make sure get stable value.
*/
do {
tmp_rtc = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
cpu_relax();
} while (tmp_rtc != sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN));
rtc_time_to_tm(rtcdrv->overflow_rtc << (BITS_PER_LONG - RTC_SHIFT) |
tmp_rtc >> RTC_SHIFT, tm);
return 0;
}
static int sirfsoc_rtc_set_time(struct device *dev,
struct rtc_time *tm)
{
unsigned long rtc_time;
struct sirfsoc_rtc_drv *rtcdrv;
rtcdrv = dev_get_drvdata(dev);
rtc_tm_to_time(tm, &rtc_time);
rtcdrv->overflow_rtc = rtc_time >> (BITS_PER_LONG - RTC_SHIFT);
sirfsoc_rtc_iobrg_writel(rtcdrv->overflow_rtc,
rtcdrv->rtc_base + RTC_SW_VALUE);
sirfsoc_rtc_iobrg_writel(
rtc_time << RTC_SHIFT, rtcdrv->rtc_base + RTC_CN);
return 0;
}
static int sirfsoc_rtc_ioctl(struct device *dev, unsigned int cmd,
unsigned long arg)
{
switch (cmd) {
case RTC_PIE_ON:
case RTC_PIE_OFF:
case RTC_UIE_ON:
case RTC_UIE_OFF:
case RTC_AIE_ON:
case RTC_AIE_OFF:
return 0;
default:
return -ENOIOCTLCMD;
}
}
static const struct rtc_class_ops sirfsoc_rtc_ops = {
.read_time = sirfsoc_rtc_read_time,
.set_time = sirfsoc_rtc_set_time,
.read_alarm = sirfsoc_rtc_read_alarm,
.set_alarm = sirfsoc_rtc_set_alarm,
.ioctl = sirfsoc_rtc_ioctl
};
static irqreturn_t sirfsoc_rtc_irq_handler(int irq, void *pdata)
{
struct sirfsoc_rtc_drv *rtcdrv = pdata;
unsigned long rtc_status_reg = 0x0;
unsigned long events = 0x0;
rtc_status_reg = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_STATUS);
/* this bit will be set ONLY if an alarm was active
* and it expired NOW
* So this is being used as an ASSERT
*/
if (rtc_status_reg & SIRFSOC_RTC_AL0) {
/*
* clear the RTC status register's alarm bit
* mask out the lower status bits
*/
rtc_status_reg &= ~0x07;
/* write 1 into SIRFSOC_RTC_AL0 to ACK the alarm interrupt */
rtc_status_reg |= (SIRFSOC_RTC_AL0);
/* Clear the Alarm enable bit */
rtc_status_reg &= ~(SIRFSOC_RTC_AL0E);
}
sirfsoc_rtc_iobrg_writel(rtc_status_reg, rtcdrv->rtc_base + RTC_STATUS);
/* this should wake up any apps polling/waiting on the read
* after setting the alarm
*/
events |= RTC_IRQF | RTC_AF;
rtc_update_irq(rtcdrv->rtc, 1, events);
return IRQ_HANDLED;
}
static const struct of_device_id sirfsoc_rtc_of_match[] = {
{ .compatible = "sirf,prima2-sysrtc"},
{},
};
MODULE_DEVICE_TABLE(of, sirfsoc_rtc_of_match);
static int sirfsoc_rtc_probe(struct platform_device *pdev)
{
int err;
unsigned long rtc_div;
struct sirfsoc_rtc_drv *rtcdrv;
struct device_node *np = pdev->dev.of_node;
rtcdrv = devm_kzalloc(&pdev->dev,
sizeof(struct sirfsoc_rtc_drv), GFP_KERNEL);
if (rtcdrv == NULL)
return -ENOMEM;
err = of_property_read_u32(np, "reg", &rtcdrv->rtc_base);
if (err) {
dev_err(&pdev->dev, "unable to find base address of rtc node in dtb\n");
return err;
}
platform_set_drvdata(pdev, rtcdrv);
/* Register rtc alarm as a wakeup source */
device_init_wakeup(&pdev->dev, 1);
/*
* Set SYS_RTC counter in RTC_HZ HZ Units
* We are using 32K RTC crystal (32768 / RTC_HZ / 2) -1
* If 16HZ, therefore RTC_DIV = 1023;
*/
rtc_div = ((32768 / RTC_HZ) / 2) - 1;
sirfsoc_rtc_iobrg_writel(rtc_div, rtcdrv->rtc_base + RTC_DIV);
rtcdrv->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
&sirfsoc_rtc_ops, THIS_MODULE);
if (IS_ERR(rtcdrv->rtc)) {
err = PTR_ERR(rtcdrv->rtc);
dev_err(&pdev->dev, "can't register RTC device\n");
return err;
}
/* 0x3 -> RTC_CLK */
sirfsoc_rtc_iobrg_writel(SIRFSOC_RTC_CLK,
rtcdrv->rtc_base + RTC_CLOCK_SWITCH);
/* reset SYS RTC ALARM0 */
sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM0);
/* reset SYS RTC ALARM1 */
sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM1);
/* Restore RTC Overflow From Register After Command Reboot */
rtcdrv->overflow_rtc =
sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_SW_VALUE);
rtcdrv->irq = platform_get_irq(pdev, 0);
err = devm_request_irq(
&pdev->dev,
rtcdrv->irq,
sirfsoc_rtc_irq_handler,
IRQF_SHARED,
pdev->name,
rtcdrv);
if (err) {
dev_err(&pdev->dev, "Unable to register for the SiRF SOC RTC IRQ\n");
return err;
}
return 0;
}
static int sirfsoc_rtc_remove(struct platform_device *pdev)
{
device_init_wakeup(&pdev->dev, 0);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int sirfsoc_rtc_suspend(struct device *dev)
{
struct sirfsoc_rtc_drv *rtcdrv = dev_get_drvdata(dev);
rtcdrv->overflow_rtc =
sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_SW_VALUE);
rtcdrv->saved_counter =
sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
rtcdrv->saved_overflow_rtc = rtcdrv->overflow_rtc;
if (device_may_wakeup(dev) && !enable_irq_wake(rtcdrv->irq))
rtcdrv->irq_wake = 1;
return 0;
}
static int sirfsoc_rtc_resume(struct device *dev)
{
u32 tmp;
struct sirfsoc_rtc_drv *rtcdrv = dev_get_drvdata(dev);
/*
* if resume from snapshot and the rtc power is lost,
* restroe the rtc settings
*/
if (SIRFSOC_RTC_CLK != sirfsoc_rtc_iobrg_readl(
rtcdrv->rtc_base + RTC_CLOCK_SWITCH)) {
u32 rtc_div;
/* 0x3 -> RTC_CLK */
sirfsoc_rtc_iobrg_writel(SIRFSOC_RTC_CLK,
rtcdrv->rtc_base + RTC_CLOCK_SWITCH);
/*
* Set SYS_RTC counter in RTC_HZ HZ Units
* We are using 32K RTC crystal (32768 / RTC_HZ / 2) -1
* If 16HZ, therefore RTC_DIV = 1023;
*/
rtc_div = ((32768 / RTC_HZ) / 2) - 1;
sirfsoc_rtc_iobrg_writel(rtc_div, rtcdrv->rtc_base + RTC_DIV);
/* reset SYS RTC ALARM0 */
sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM0);
/* reset SYS RTC ALARM1 */
sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM1);
}
rtcdrv->overflow_rtc = rtcdrv->saved_overflow_rtc;
/*
* if current counter is small than previous,
* it means overflow in sleep
*/
tmp = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
if (tmp <= rtcdrv->saved_counter)
rtcdrv->overflow_rtc++;
/*
*PWRC Value Be Changed When Suspend, Restore Overflow
* In Memory To Register
*/
sirfsoc_rtc_iobrg_writel(rtcdrv->overflow_rtc,
rtcdrv->rtc_base + RTC_SW_VALUE);
if (device_may_wakeup(dev) && rtcdrv->irq_wake) {
disable_irq_wake(rtcdrv->irq);
rtcdrv->irq_wake = 0;
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(sirfsoc_rtc_pm_ops,
sirfsoc_rtc_suspend, sirfsoc_rtc_resume);
static struct platform_driver sirfsoc_rtc_driver = {
.driver = {
.name = "sirfsoc-rtc",
.owner = THIS_MODULE,
.pm = &sirfsoc_rtc_pm_ops,
.of_match_table = sirfsoc_rtc_of_match,
},
.probe = sirfsoc_rtc_probe,
.remove = sirfsoc_rtc_remove,
};
module_platform_driver(sirfsoc_rtc_driver);
MODULE_DESCRIPTION("SiRF SoC rtc driver");
MODULE_AUTHOR("Xianglong Du <Xianglong.Du@csr.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:sirfsoc-rtc");
Reference in New Issue View Git Blame Copy Permalink