0fd0c21be7
Add the necessary code and data to allow the clock framework to enable and disable the OMAP2 DPLL autoidle state. This is so the direct register access can be moved out of the mach-omap2/pm24xx.c code, and other code that needs to control this (e.g., CPUIdle) can do so via an API. As part of this patch, remove the pm24xx.c code that formerly wrote directly to the autoidle bits. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
252 lines
8.0 KiB
Makefile
252 lines
8.0 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
# Common support
|
|
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
|
|
common.o gpio.o dma.o wd_timer.o
|
|
|
|
omap-2-3-common = irq.o sdrc.o
|
|
hwmod-common = omap_hwmod.o \
|
|
omap_hwmod_common_data.o
|
|
clock-common = clock.o clock_common_data.o \
|
|
clkt_dpll.o clkt_clksel.o
|
|
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
|
|
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
|
|
|
|
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
|
|
|
|
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
|
|
|
|
# SMP support ONLY available for OMAP4
|
|
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
|
|
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
|
|
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
|
|
|
|
plus_sec := $(call as-instr,.arch_extension sec,+sec)
|
|
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
|
|
# Functions loaded to SRAM
|
|
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
|
|
|
|
AFLAGS_sram242x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram243x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
|
|
|
|
# Pin multiplexing
|
|
obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
|
|
|
|
# SMS/SDRC
|
|
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
|
|
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
|
|
|
|
# OPP table initialization
|
|
ifeq ($(CONFIG_PM_OPP),y)
|
|
obj-y += opp.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
|
|
endif
|
|
|
|
# Power Management
|
|
ifeq ($(CONFIG_PM),y)
|
|
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o voltage.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \
|
|
cpuidle34xx.o pm_bus.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o voltage.o pm_bus.o
|
|
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
|
|
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
|
|
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
|
|
|
|
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
|
|
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
|
|
|
|
ifeq ($(CONFIG_PM_VERBOSE),y)
|
|
CFLAGS_pm_bus.o += -DDEBUG
|
|
endif
|
|
|
|
endif
|
|
|
|
# PRCM
|
|
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
|
|
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
|
|
# will be removed once the OMAP4 part of the codebase is converted to
|
|
# use OMAP4-specific PRCM functions.
|
|
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
|
|
cm44xx.o prcm_mpu44xx.o \
|
|
prminst44xx.o
|
|
|
|
# OMAP powerdomain framework
|
|
powerdomain-common += powerdomain.o powerdomain-common.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
|
|
powerdomain2xxx_3xxx.o \
|
|
powerdomains2xxx_data.o \
|
|
powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
|
|
powerdomain2xxx_3xxx.o \
|
|
powerdomains3xxx_data.o \
|
|
powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
|
|
powerdomain44xx.o \
|
|
powerdomains44xx_data.o
|
|
|
|
# PRCM clockdomain control
|
|
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
|
|
clockdomain2xxx_3xxx.o \
|
|
clockdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
|
|
clockdomain2xxx_3xxx.o \
|
|
clockdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
|
|
clockdomain44xx.o \
|
|
clockdomains44xx_data.o
|
|
# Clock framework
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
|
|
clkt2xxx_sys.o \
|
|
clkt2xxx_dpllcore.o \
|
|
clkt2xxx_virt_prcm_set.o \
|
|
clkt2xxx_apll.o clkt2xxx_osc.o \
|
|
clkt2xxx_dpll.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
|
|
clock34xx.o clkt34xx_dpll3m2.o \
|
|
clock3517.o clock36xx.o \
|
|
dpll3xxx.o clock3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
|
|
dpll3xxx.o dpll44xx.o
|
|
|
|
# OMAP2 clock rate set data (old "OPP" data)
|
|
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
|
|
|
|
# hwmod data
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
|
|
|
|
# EMU peripherals
|
|
obj-$(CONFIG_OMAP3_EMU) += emu.o
|
|
|
|
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
|
|
mailbox_mach-objs := mailbox.o
|
|
|
|
obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
|
|
|
|
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
|
|
obj-y += $(iommu-m) $(iommu-y)
|
|
|
|
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
|
|
obj-y += $(i2c-omap-m) $(i2c-omap-y)
|
|
|
|
ifneq ($(CONFIG_TIDSPBRIDGE),)
|
|
obj-y += dsp.o
|
|
endif
|
|
|
|
# Specific board support
|
|
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
|
|
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
|
|
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
|
|
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
|
|
board-flash.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
|
|
hsmmc.o \
|
|
board-flash.o
|
|
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
|
|
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
|
|
sdram-nokia.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
|
|
sdram-nokia.o \
|
|
board-rx51-peripherals.o \
|
|
board-rx51-video.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
|
|
board-zoom-peripherals.o \
|
|
board-zoom-display.o \
|
|
board-flash.o \
|
|
hsmmc.o \
|
|
board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
|
|
board-zoom-peripherals.o \
|
|
board-zoom-display.o \
|
|
board-flash.o \
|
|
hsmmc.o \
|
|
board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
|
|
board-zoom-peripherals.o \
|
|
board-zoom-display.o \
|
|
board-flash.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
|
|
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
|
|
hsmmc.o \
|
|
omap_phy_internal.o
|
|
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
|
|
hsmmc.o \
|
|
omap_phy_internal.o
|
|
|
|
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \
|
|
omap_phy_internal.o \
|
|
|
|
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
|
|
|
|
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
|
|
# Platform specific device init code
|
|
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
|
|
obj-y += $(usbfs-m) $(usbfs-y)
|
|
obj-y += usb-musb.o
|
|
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
|
|
obj-y += usb-ehci.o
|
|
|
|
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
|
|
obj-y += $(onenand-m) $(onenand-y)
|
|
|
|
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
|
|
obj-y += $(nand-m) $(nand-y)
|
|
|
|
smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
|
|
obj-y += $(smc91x-m) $(smc91x-y)
|
|
|
|
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
|
|
obj-y += $(smsc911x-m) $(smsc911x-y)
|
|
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
|