kernel-ark/include/asm-m68knommu/mcfpit.h
Greg Ungerer b671b653da [PATCH] m68knommu: read/write register access for PIT timer
Modify the m68knommu/ColdFire PIT timer code to use register offsets
with raw_read/raw_write access, instead of a mapped struct.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 17:43:33 -07:00

65 lines
2.7 KiB
C

/****************************************************************************/
/*
* mcfpit.h -- ColdFire internal PIT timer support defines.
*
* (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
*/
/****************************************************************************/
#ifndef mcfpit_h
#define mcfpit_h
/****************************************************************************/
/*
* Get address specific defines for the 5270/5271, 5280/5282, and 5208.
*/
#if defined(CONFIG_M520x)
#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */
#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */
#else
#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */
#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */
#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */
#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */
#endif
/*
* Define the PIT timer register set addresses.
*/
#define MCFPIT_PCSR 0x0 /* PIT control register */
#define MCFPIT_PMR 0x2 /* PIT modulus register */
#define MCFPIT_PCNTR 0x4 /* PIT count register */
/*
* Bit definitions for the PIT Control and Status register.
*/
#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */
#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */
#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */
#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */
#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */
#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */
#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */
#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */
#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */
#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */
#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */
#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */
#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */
#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */
#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */
#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */
#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */
#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */
#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */
#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */
#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */
#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */
#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */
#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */
/****************************************************************************/
#endif /* mcfpit_h */