kernel-ark/arch/ppc64/kernel/scanlog.c
Al Viro efa545791f [PATCH] ppc64: trivial user annotations
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-26 11:26:53 -07:00

246 lines
6.5 KiB
C

/*
* c 2001 PPC 64 Team, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* scan-log-data driver for PPC64 Todd Inglett <tinglett@vnet.ibm.com>
*
* When ppc64 hardware fails the service processor dumps internal state
* of the system. After a reboot the operating system can access a dump
* of this data using this driver. A dump exists if the device-tree
* /chosen/ibm,scan-log-data property exists.
*
* This driver exports /proc/ppc64/scan-log-dump which can be read.
* The driver supports only sequential reads.
*
* The driver looks at a write to the driver for the single word "reset".
* If given, the driver will reset the scanlog so the platform can free it.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/rtas.h>
#include <asm/prom.h>
#define MODULE_VERS "1.0"
#define MODULE_NAME "scanlog"
/* Status returns from ibm,scan-log-dump */
#define SCANLOG_COMPLETE 0
#define SCANLOG_HWERROR -1
#define SCANLOG_CONTINUE 1
#define DEBUG(A...) do { if (scanlog_debug) printk(KERN_ERR "scanlog: " A); } while (0)
static int scanlog_debug;
static unsigned int ibm_scan_log_dump; /* RTAS token */
static struct proc_dir_entry *proc_ppc64_scan_log_dump; /* The proc file */
static ssize_t scanlog_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct inode * inode = file->f_dentry->d_inode;
struct proc_dir_entry *dp;
unsigned int *data;
int status;
unsigned long len, off;
unsigned int wait_time;
dp = PDE(inode);
data = (unsigned int *)dp->data;
if (!data) {
printk(KERN_ERR "scanlog: read failed no data\n");
return -EIO;
}
if (count > RTAS_DATA_BUF_SIZE)
count = RTAS_DATA_BUF_SIZE;
if (count < 1024) {
/* This is the min supported by this RTAS call. Rather
* than do all the buffering we insist the user code handle
* larger reads. As long as cp works... :)
*/
printk(KERN_ERR "scanlog: cannot perform a small read (%ld)\n", count);
return -EINVAL;
}
if (!access_ok(VERIFY_WRITE, buf, count))
return -EFAULT;
for (;;) {
wait_time = HZ/2; /* default wait if no data */
spin_lock(&rtas_data_buf_lock);
memcpy(rtas_data_buf, data, RTAS_DATA_BUF_SIZE);
status = rtas_call(ibm_scan_log_dump, 2, 1, NULL,
(u32) __pa(rtas_data_buf), (u32) count);
memcpy(data, rtas_data_buf, RTAS_DATA_BUF_SIZE);
spin_unlock(&rtas_data_buf_lock);
DEBUG("status=%d, data[0]=%x, data[1]=%x, data[2]=%x\n",
status, data[0], data[1], data[2]);
switch (status) {
case SCANLOG_COMPLETE:
DEBUG("hit eof\n");
return 0;
case SCANLOG_HWERROR:
DEBUG("hardware error reading scan log data\n");
return -EIO;
case SCANLOG_CONTINUE:
/* We may or may not have data yet */
len = data[1];
off = data[2];
if (len > 0) {
if (copy_to_user(buf, ((char *)data)+off, len))
return -EFAULT;
return len;
}
/* Break to sleep default time */
break;
default:
if (status > 9900 && status <= 9905) {
/* No data. RTAS is hinting at a delay required
* between 1-100000 milliseconds
*/
int ms = 1;
for (; status > 9900; status--)
ms = ms * 10;
/* Use microseconds for reasonable accuracy */
ms *= 1000;
wait_time = ms / (1000000/HZ); /* round down is fine */
/* Fall through to sleep */
} else {
printk(KERN_ERR "scanlog: unknown error from rtas: %d\n", status);
return -EIO;
}
}
/* Apparently no data yet. Wait and try again. */
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(wait_time);
}
/*NOTREACHED*/
}
static ssize_t scanlog_write(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
char stkbuf[20];
int status;
if (count > 19) count = 19;
if (copy_from_user (stkbuf, buf, count)) {
return -EFAULT;
}
stkbuf[count] = 0;
if (buf) {
if (strncmp(stkbuf, "reset", 5) == 0) {
DEBUG("reset scanlog\n");
status = rtas_call(ibm_scan_log_dump, 2, 1, NULL, 0, 0);
DEBUG("rtas returns %d\n", status);
} else if (strncmp(stkbuf, "debugon", 7) == 0) {
printk(KERN_ERR "scanlog: debug on\n");
scanlog_debug = 1;
} else if (strncmp(stkbuf, "debugoff", 8) == 0) {
printk(KERN_ERR "scanlog: debug off\n");
scanlog_debug = 0;
}
}
return count;
}
static int scanlog_open(struct inode * inode, struct file * file)
{
struct proc_dir_entry *dp = PDE(inode);
unsigned int *data = (unsigned int *)dp->data;
if (!data) {
printk(KERN_ERR "scanlog: open failed no data\n");
return -EIO;
}
if (data[0] != 0) {
/* This imperfect test stops a second copy of the
* data (or a reset while data is being copied)
*/
return -EBUSY;
}
data[0] = 0; /* re-init so we restart the scan */
return 0;
}
static int scanlog_release(struct inode * inode, struct file * file)
{
struct proc_dir_entry *dp = PDE(inode);
unsigned int *data = (unsigned int *)dp->data;
if (!data) {
printk(KERN_ERR "scanlog: release failed no data\n");
return -EIO;
}
data[0] = 0;
return 0;
}
struct file_operations scanlog_fops = {
.owner = THIS_MODULE,
.read = scanlog_read,
.write = scanlog_write,
.open = scanlog_open,
.release = scanlog_release,
};
int __init scanlog_init(void)
{
struct proc_dir_entry *ent;
ibm_scan_log_dump = rtas_token("ibm,scan-log-dump");
if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) {
printk(KERN_ERR "scan-log-dump not implemented on this system\n");
return -EIO;
}
ent = create_proc_entry("ppc64/rtas/scan-log-dump", S_IRUSR, NULL);
if (ent) {
ent->proc_fops = &scanlog_fops;
/* Ideally we could allocate a buffer < 4G */
ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
if (!ent->data) {
printk(KERN_ERR "Failed to allocate a buffer\n");
remove_proc_entry("scan-log-dump", ent->parent);
return -ENOMEM;
}
((unsigned int *)ent->data)[0] = 0;
} else {
printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n");
return -EIO;
}
proc_ppc64_scan_log_dump = ent;
return 0;
}
void __exit scanlog_cleanup(void)
{
if (proc_ppc64_scan_log_dump) {
if (proc_ppc64_scan_log_dump->data)
kfree(proc_ppc64_scan_log_dump->data);
remove_proc_entry("scan-log-dump", proc_ppc64_scan_log_dump->parent);
}
}
module_init(scanlog_init);
module_exit(scanlog_cleanup);
MODULE_LICENSE("GPL");