davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0bc2a79a20
kernel-ark/drivers/scsi/qla4xxx/ql4_os.c
Paul Mundt 20c2df83d2 mm: Remove slab destructors from kmem_cache_create(). 
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00

1731 lines
46 KiB
C
Raw Blame History

/*
* QLogic iSCSI HBA Driver
* Copyright (c) 2003-2006 QLogic Corporation
*
* See LICENSE.qla4xxx for copyright and licensing details.
*/
#include <linux/moduleparam.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
#include "ql4_def.h"
#include "ql4_version.h"
#include "ql4_glbl.h"
#include "ql4_dbg.h"
#include "ql4_inline.h"
/*
* Driver version
*/
static char qla4xxx_version_str[40];
/*
* SRB allocation cache
*/
static struct kmem_cache *srb_cachep;
/*
* Module parameter information and variables
*/
int ql4xdiscoverywait = 60;
module_param(ql4xdiscoverywait, int, S_IRUGO | S_IRUSR);
MODULE_PARM_DESC(ql4xdiscoverywait, "Discovery wait time");
int ql4xdontresethba = 0;
module_param(ql4xdontresethba, int, S_IRUGO | S_IRUSR);
MODULE_PARM_DESC(ql4xdontresethba,
"Dont reset the HBA when the driver gets 0x8002 AEN "
" default it will reset hba :0"
" set to 1 to avoid resetting HBA");
int ql4xextended_error_logging = 0; /* 0 = off, 1 = log errors */
module_param(ql4xextended_error_logging, int, S_IRUGO | S_IRUSR);
MODULE_PARM_DESC(ql4xextended_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging, 1 - debug logging");
int ql4_mod_unload = 0;
/*
* SCSI host template entry points
*/
static void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha);
/*
* iSCSI template entry points
*/
static int qla4xxx_tgt_dscvr(struct Scsi_Host *shost,
enum iscsi_tgt_dscvr type, uint32_t enable,
struct sockaddr *dst_addr);
static int qla4xxx_conn_get_param(struct iscsi_cls_conn *conn,
enum iscsi_param param, char *buf);
static int qla4xxx_sess_get_param(struct iscsi_cls_session *sess,
enum iscsi_param param, char *buf);
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf);
static void qla4xxx_conn_stop(struct iscsi_cls_conn *conn, int flag);
static int qla4xxx_conn_start(struct iscsi_cls_conn *conn);
static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session);
/*
* SCSI host template entry points
*/
static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
void (*done) (struct scsi_cmnd *));
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
static int qla4xxx_slave_alloc(struct scsi_device *device);
static int qla4xxx_slave_configure(struct scsi_device *device);
static void qla4xxx_slave_destroy(struct scsi_device *sdev);
static struct scsi_host_template qla4xxx_driver_template = {
.module = THIS_MODULE,
.name = DRIVER_NAME,
.proc_name = DRIVER_NAME,
.queuecommand = qla4xxx_queuecommand,
.eh_device_reset_handler = qla4xxx_eh_device_reset,
.eh_host_reset_handler = qla4xxx_eh_host_reset,
.slave_configure = qla4xxx_slave_configure,
.slave_alloc = qla4xxx_slave_alloc,
.slave_destroy = qla4xxx_slave_destroy,
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
};
static struct iscsi_transport qla4xxx_iscsi_transport = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.caps = CAP_FW_DB | CAP_SENDTARGETS_OFFLOAD |
CAP_DATA_PATH_OFFLOAD,
.param_mask = ISCSI_CONN_PORT | ISCSI_CONN_ADDRESS |
ISCSI_TARGET_NAME | ISCSI_TPGT,
.host_param_mask = ISCSI_HOST_HWADDRESS |
ISCSI_HOST_IPADDRESS |
ISCSI_HOST_INITIATOR_NAME,
.sessiondata_size = sizeof(struct ddb_entry),
.host_template = &qla4xxx_driver_template,
.tgt_dscvr = qla4xxx_tgt_dscvr,
.get_conn_param = qla4xxx_conn_get_param,
.get_session_param = qla4xxx_sess_get_param,
.get_host_param = qla4xxx_host_get_param,
.start_conn = qla4xxx_conn_start,
.stop_conn = qla4xxx_conn_stop,
.session_recovery_timedout = qla4xxx_recovery_timedout,
};
static struct scsi_transport_template *qla4xxx_scsi_transport;
static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
{
struct ddb_entry *ddb_entry = session->dd_data;
struct scsi_qla_host *ha = ddb_entry->ha;
DEBUG2(printk("scsi%ld: %s: index [%d] port down retry count of (%d) "
"secs exhausted, marking device DEAD.\n", ha->host_no,
__func__, ddb_entry->fw_ddb_index,
ha->port_down_retry_count));
atomic_set(&ddb_entry->state, DDB_STATE_DEAD);
DEBUG2(printk("scsi%ld: %s: scheduling dpc routine - dpc flags = "
"0x%lx\n", ha->host_no, __func__, ha->dpc_flags));
queue_work(ha->dpc_thread, &ha->dpc_work);
}
static int qla4xxx_conn_start(struct iscsi_cls_conn *conn)
{
struct iscsi_cls_session *session;
struct ddb_entry *ddb_entry;
session = iscsi_dev_to_session(conn->dev.parent);
ddb_entry = session->dd_data;
DEBUG2(printk("scsi%ld: %s: index [%d] starting conn\n",
ddb_entry->ha->host_no, __func__,
ddb_entry->fw_ddb_index));
iscsi_unblock_session(session);
return 0;
}
static void qla4xxx_conn_stop(struct iscsi_cls_conn *conn, int flag)
{
struct iscsi_cls_session *session;
struct ddb_entry *ddb_entry;
session = iscsi_dev_to_session(conn->dev.parent);
ddb_entry = session->dd_data;
DEBUG2(printk("scsi%ld: %s: index [%d] stopping conn\n",
ddb_entry->ha->host_no, __func__,
ddb_entry->fw_ddb_index));
if (flag == STOP_CONN_RECOVER)
iscsi_block_session(session);
else
printk(KERN_ERR "iscsi: invalid stop flag %d\n", flag);
}
static ssize_t format_addr(char *buf, const unsigned char *addr, int len)
{
int i;
char *cp = buf;
for (i = 0; i < len; i++)
cp += sprintf(cp, "%02x%c", addr[i],
i == (len - 1) ? '\n' : ':');
return cp - buf;
}
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf)
{
struct scsi_qla_host *ha = to_qla_host(shost);
int len;
switch (param) {
case ISCSI_HOST_PARAM_HWADDRESS:
len = format_addr(buf, ha->my_mac, MAC_ADDR_LEN);
break;
case ISCSI_HOST_PARAM_IPADDRESS:
len = sprintf(buf, "%d.%d.%d.%d\n", ha->ip_address[0],
ha->ip_address[1], ha->ip_address[2],
ha->ip_address[3]);
break;
case ISCSI_HOST_PARAM_INITIATOR_NAME:
len = sprintf(buf, "%s\n", ha->name_string);
break;
default:
return -ENOSYS;
}
return len;
}
static int qla4xxx_sess_get_param(struct iscsi_cls_session *sess,
enum iscsi_param param, char *buf)
{
struct ddb_entry *ddb_entry = sess->dd_data;
int len;
switch (param) {
case ISCSI_PARAM_TARGET_NAME:
len = snprintf(buf, PAGE_SIZE - 1, "%s\n",
ddb_entry->iscsi_name);
break;
case ISCSI_PARAM_TPGT:
len = sprintf(buf, "%u\n", ddb_entry->tpgt);
break;
default:
return -ENOSYS;
}
return len;
}
static int qla4xxx_conn_get_param(struct iscsi_cls_conn *conn,
enum iscsi_param param, char *buf)
{
struct iscsi_cls_session *session;
struct ddb_entry *ddb_entry;
int len;
session = iscsi_dev_to_session(conn->dev.parent);
ddb_entry = session->dd_data;
switch (param) {
case ISCSI_PARAM_CONN_PORT:
len = sprintf(buf, "%hu\n", ddb_entry->port);
break;
case ISCSI_PARAM_CONN_ADDRESS:
/* TODO: what are the ipv6 bits */
len = sprintf(buf, "%u.%u.%u.%u\n",
NIPQUAD(ddb_entry->ip_addr));
break;
default:
return -ENOSYS;
}
return len;
}
static int qla4xxx_tgt_dscvr(struct Scsi_Host *shost,
enum iscsi_tgt_dscvr type, uint32_t enable,
struct sockaddr *dst_addr)
{
struct scsi_qla_host *ha;
struct sockaddr_in *addr;
struct sockaddr_in6 *addr6;
int ret = 0;
ha = (struct scsi_qla_host *) shost->hostdata;
switch (type) {
case ISCSI_TGT_DSCVR_SEND_TARGETS:
if (dst_addr->sa_family == AF_INET) {
addr = (struct sockaddr_in *)dst_addr;
if (qla4xxx_send_tgts(ha, (char *)&addr->sin_addr,
addr->sin_port) != QLA_SUCCESS)
ret = -EIO;
} else if (dst_addr->sa_family == AF_INET6) {
/*
* TODO: fix qla4xxx_send_tgts
*/
addr6 = (struct sockaddr_in6 *)dst_addr;
if (qla4xxx_send_tgts(ha, (char *)&addr6->sin6_addr,
addr6->sin6_port) != QLA_SUCCESS)
ret = -EIO;
} else
ret = -ENOSYS;
break;
default:
ret = -ENOSYS;
}
return ret;
}
void qla4xxx_destroy_sess(struct ddb_entry *ddb_entry)
{
if (!ddb_entry->sess)
return;
if (ddb_entry->conn) {
iscsi_if_destroy_session_done(ddb_entry->conn);
iscsi_destroy_conn(ddb_entry->conn);
iscsi_remove_session(ddb_entry->sess);
}
iscsi_free_session(ddb_entry->sess);
}
int qla4xxx_add_sess(struct ddb_entry *ddb_entry)
{
int err;
err = iscsi_add_session(ddb_entry->sess, ddb_entry->fw_ddb_index);
if (err) {
DEBUG2(printk(KERN_ERR "Could not add session.\n"));
return err;
}
ddb_entry->conn = iscsi_create_conn(ddb_entry->sess, 0);
if (!ddb_entry->conn) {
iscsi_remove_session(ddb_entry->sess);
DEBUG2(printk(KERN_ERR "Could not add connection.\n"));
return -ENOMEM;
}
ddb_entry->sess->recovery_tmo = ddb_entry->ha->port_down_retry_count;
iscsi_if_create_session_done(ddb_entry->conn);
return 0;
}
struct ddb_entry *qla4xxx_alloc_sess(struct scsi_qla_host *ha)
{
struct ddb_entry *ddb_entry;
struct iscsi_cls_session *sess;
sess = iscsi_alloc_session(ha->host, &qla4xxx_iscsi_transport);
if (!sess)
return NULL;
ddb_entry = sess->dd_data;
memset(ddb_entry, 0, sizeof(*ddb_entry));
ddb_entry->ha = ha;
ddb_entry->sess = sess;
return ddb_entry;
}
/*
* Timer routines
*/
static void qla4xxx_start_timer(struct scsi_qla_host *ha, void *func,
unsigned long interval)
{
DEBUG(printk("scsi: %s: Starting timer thread for adapter %d\n",
__func__, ha->host->host_no));
init_timer(&ha->timer);
ha->timer.expires = jiffies + interval * HZ;
ha->timer.data = (unsigned long)ha;
ha->timer.function = (void (*)(unsigned long))func;
add_timer(&ha->timer);
ha->timer_active = 1;
}
static void qla4xxx_stop_timer(struct scsi_qla_host *ha)
{
del_timer_sync(&ha->timer);
ha->timer_active = 0;
}
/***
* qla4xxx_mark_device_missing - mark a device as missing.
* @ha: Pointer to host adapter structure.
* @ddb_entry: Pointer to device database entry
*
* This routine marks a device missing and resets the relogin retry count.
**/
void qla4xxx_mark_device_missing(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry)
{
atomic_set(&ddb_entry->state, DDB_STATE_MISSING);
DEBUG3(printk("scsi%d:%d:%d: index [%d] marked MISSING\n",
ha->host_no, ddb_entry->bus, ddb_entry->target,
ddb_entry->fw_ddb_index));
iscsi_conn_error(ddb_entry->conn, ISCSI_ERR_CONN_FAILED);
}
static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry,
struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct srb *srb;
srb = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
if (!srb)
return srb;
atomic_set(&srb->ref_count, 1);
srb->ha = ha;
srb->ddb = ddb_entry;
srb->cmd = cmd;
srb->flags = 0;
cmd->SCp.ptr = (void *)srb;
cmd->scsi_done = done;
return srb;
}
static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb)
{
struct scsi_cmnd *cmd = srb->cmd;
if (srb->flags & SRB_DMA_VALID) {
scsi_dma_unmap(cmd);
srb->flags &= ~SRB_DMA_VALID;
}
cmd->SCp.ptr = NULL;
}
void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb)
{
struct scsi_cmnd *cmd = srb->cmd;
qla4xxx_srb_free_dma(ha, srb);
mempool_free(srb, ha->srb_mempool);
cmd->scsi_done(cmd);
}
/**
* qla4xxx_queuecommand - scsi layer issues scsi command to driver.
* @cmd: Pointer to Linux's SCSI command structure
* @done_fn: Function that the driver calls to notify the SCSI mid-layer
* that the command has been processed.
*
* Remarks:
* This routine is invoked by Linux to send a SCSI command to the driver.
* The mid-level driver tries to ensure that queuecommand never gets
* invoked concurrently with itself or the interrupt handler (although
* the interrupt handler may call this routine as part of request-
* completion handling). Unfortunely, it sometimes calls the scheduler
* in interrupt context which is a big NO! NO!.
**/
static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
struct ddb_entry *ddb_entry = cmd->device->hostdata;
struct srb *srb;
int rval;
if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) {
if (atomic_read(&ddb_entry->state) == DDB_STATE_DEAD) {
cmd->result = DID_NO_CONNECT << 16;
goto qc_fail_command;
}
goto qc_host_busy;
}
if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags))
goto qc_host_busy;
spin_unlock_irq(ha->host->host_lock);
srb = qla4xxx_get_new_srb(ha, ddb_entry, cmd, done);
if (!srb)
goto qc_host_busy_lock;
rval = qla4xxx_send_command_to_isp(ha, srb);
if (rval != QLA_SUCCESS)
goto qc_host_busy_free_sp;
spin_lock_irq(ha->host->host_lock);
return 0;
qc_host_busy_free_sp:
qla4xxx_srb_free_dma(ha, srb);
mempool_free(srb, ha->srb_mempool);
qc_host_busy_lock:
spin_lock_irq(ha->host->host_lock);
qc_host_busy:
return SCSI_MLQUEUE_HOST_BUSY;
qc_fail_command:
done(cmd);
return 0;
}
/**
* qla4xxx_mem_free - frees memory allocated to adapter
* @ha: Pointer to host adapter structure.
*
* Frees memory previously allocated by qla4xxx_mem_alloc
**/
static void qla4xxx_mem_free(struct scsi_qla_host *ha)
{
if (ha->queues)
dma_free_coherent(&ha->pdev->dev, ha->queues_len, ha->queues,
ha->queues_dma);
ha->queues_len = 0;
ha->queues = NULL;
ha->queues_dma = 0;
ha->request_ring = NULL;
ha->request_dma = 0;
ha->response_ring = NULL;
ha->response_dma = 0;
ha->shadow_regs = NULL;
ha->shadow_regs_dma = 0;
/* Free srb pool. */
if (ha->srb_mempool)
mempool_destroy(ha->srb_mempool);
ha->srb_mempool = NULL;
/* release io space registers */
if (ha->reg)
iounmap(ha->reg);
pci_release_regions(ha->pdev);
}
/**
* qla4xxx_mem_alloc - allocates memory for use by adapter.
* @ha: Pointer to host adapter structure
*
* Allocates DMA memory for request and response queues. Also allocates memory
* for srbs.
**/
static int qla4xxx_mem_alloc(struct scsi_qla_host *ha)
{
unsigned long align;
/* Allocate contiguous block of DMA memory for queues. */
ha->queues_len = ((REQUEST_QUEUE_DEPTH * QUEUE_SIZE) +
(RESPONSE_QUEUE_DEPTH * QUEUE_SIZE) +
sizeof(struct shadow_regs) +
MEM_ALIGN_VALUE +
(PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
ha->queues = dma_alloc_coherent(&ha->pdev->dev, ha->queues_len,
&ha->queues_dma, GFP_KERNEL);
if (ha->queues == NULL) {
dev_warn(&ha->pdev->dev,
"Memory Allocation failed - queues.\n");
goto mem_alloc_error_exit;
}
memset(ha->queues, 0, ha->queues_len);
/*
* As per RISC alignment requirements -- the bus-address must be a
* multiple of the request-ring size (in bytes).
*/
align = 0;
if ((unsigned long)ha->queues_dma & (MEM_ALIGN_VALUE - 1))
align = MEM_ALIGN_VALUE - ((unsigned long)ha->queues_dma &
(MEM_ALIGN_VALUE - 1));
/* Update request and response queue pointers. */
ha->request_dma = ha->queues_dma + align;
ha->request_ring = (struct queue_entry *) (ha->queues + align);
ha->response_dma = ha->queues_dma + align +
(REQUEST_QUEUE_DEPTH * QUEUE_SIZE);
ha->response_ring = (struct queue_entry *) (ha->queues + align +
(REQUEST_QUEUE_DEPTH *
QUEUE_SIZE));
ha->shadow_regs_dma = ha->queues_dma + align +
(REQUEST_QUEUE_DEPTH * QUEUE_SIZE) +
(RESPONSE_QUEUE_DEPTH * QUEUE_SIZE);
ha->shadow_regs = (struct shadow_regs *) (ha->queues + align +
(REQUEST_QUEUE_DEPTH *
QUEUE_SIZE) +
(RESPONSE_QUEUE_DEPTH *
QUEUE_SIZE));
/* Allocate memory for srb pool. */
ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab,
mempool_free_slab, srb_cachep);
if (ha->srb_mempool == NULL) {
dev_warn(&ha->pdev->dev,
"Memory Allocation failed - SRB Pool.\n");
goto mem_alloc_error_exit;
}
return QLA_SUCCESS;
mem_alloc_error_exit:
qla4xxx_mem_free(ha);
return QLA_ERROR;
}
/**
* qla4xxx_timer - checks every second for work to do.
* @ha: Pointer to host adapter structure.
**/
static void qla4xxx_timer(struct scsi_qla_host *ha)
{
struct ddb_entry *ddb_entry, *dtemp;
int start_dpc = 0;
/* Search for relogin's to time-out and port down retry. */
list_for_each_entry_safe(ddb_entry, dtemp, &ha->ddb_list, list) {
/* Count down time between sending relogins */
if (adapter_up(ha) &&
!test_bit(DF_RELOGIN, &ddb_entry->flags) &&
atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) {
if (atomic_read(&ddb_entry->retry_relogin_timer) !=
INVALID_ENTRY) {
if (atomic_read(&ddb_entry->retry_relogin_timer)
== 0) {
atomic_set(&ddb_entry->
retry_relogin_timer,
INVALID_ENTRY);
set_bit(DPC_RELOGIN_DEVICE,
&ha->dpc_flags);
set_bit(DF_RELOGIN, &ddb_entry->flags);
DEBUG2(printk("scsi%ld: %s: index [%d]"
" login device\n",
ha->host_no, __func__,
ddb_entry->fw_ddb_index));
} else
atomic_dec(&ddb_entry->
retry_relogin_timer);
}
}
/* Wait for relogin to timeout */
if (atomic_read(&ddb_entry->relogin_timer) &&
(atomic_dec_and_test(&ddb_entry->relogin_timer) != 0)) {
/*
* If the relogin times out and the device is
* still NOT ONLINE then try and relogin again.
*/
if (atomic_read(&ddb_entry->state) !=
DDB_STATE_ONLINE &&
ddb_entry->fw_ddb_device_state ==
DDB_DS_SESSION_FAILED) {
/* Reset retry relogin timer */
atomic_inc(&ddb_entry->relogin_retry_count);
DEBUG2(printk("scsi%ld: index[%d] relogin"
" timed out-retrying"
" relogin (%d)\n",
ha->host_no,
ddb_entry->fw_ddb_index,
atomic_read(&ddb_entry->
relogin_retry_count))
);
start_dpc++;
DEBUG(printk("scsi%ld:%d:%d: index [%d] "
"initate relogin after"
" %d seconds\n",
ha->host_no, ddb_entry->bus,
ddb_entry->target,
ddb_entry->fw_ddb_index,
ddb_entry->default_time2wait + 4)
);
atomic_set(&ddb_entry->retry_relogin_timer,
ddb_entry->default_time2wait + 4);
}
}
}
/* Check for heartbeat interval. */
if (ha->firmware_options & FWOPT_HEARTBEAT_ENABLE &&
ha->heartbeat_interval != 0) {
ha->seconds_since_last_heartbeat++;
if (ha->seconds_since_last_heartbeat >
ha->heartbeat_interval + 2)
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
/* Wakeup the dpc routine for this adapter, if needed. */
if ((start_dpc ||
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
test_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags) ||
test_bit(DPC_AEN, &ha->dpc_flags)) &&
ha->dpc_thread) {
DEBUG2(printk("scsi%ld: %s: scheduling dpc routine"
" - dpc flags = 0x%lx\n",
ha->host_no, __func__, ha->dpc_flags));
queue_work(ha->dpc_thread, &ha->dpc_work);
}
/* Reschedule timer thread to call us back in one second */
mod_timer(&ha->timer, jiffies + HZ);
DEBUG2(ha->seconds_since_last_intr++);
}
/**
* qla4xxx_cmd_wait - waits for all outstanding commands to complete
* @ha: Pointer to host adapter structure.
*
* This routine stalls the driver until all outstanding commands are returned.
* Caller must release the Hardware Lock prior to calling this routine.
**/
static int qla4xxx_cmd_wait(struct scsi_qla_host *ha)
{
uint32_t index = 0;
int stat = QLA_SUCCESS;
unsigned long flags;
struct scsi_cmnd *cmd;
int wait_cnt = WAIT_CMD_TOV; /*
* Initialized for 30 seconds as we
* expect all commands to retuned
* ASAP.
*/
while (wait_cnt) {
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Find a command that hasn't completed. */
for (index = 0; index < ha->host->can_queue; index++) {
cmd = scsi_host_find_tag(ha->host, index);
if (cmd != NULL)
break;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* If No Commands are pending, wait is complete */
if (index == ha->host->can_queue) {
break;
}
/* If we timed out on waiting for commands to come back
* return ERROR.
*/
wait_cnt--;
if (wait_cnt == 0)
stat = QLA_ERROR;
else {
msleep(1000);
}
} /* End of While (wait_cnt) */
return stat;
}
void qla4xxx_hw_reset(struct scsi_qla_host *ha)
{
uint32_t ctrl_status;
unsigned long flags = 0;
DEBUG2(printk(KERN_ERR "scsi%ld: %s\n", ha->host_no, __func__));
spin_lock_irqsave(&ha->hardware_lock, flags);
/*
* If the SCSI Reset Interrupt bit is set, clear it.
* Otherwise, the Soft Reset won't work.
*/
ctrl_status = readw(&ha->reg->ctrl_status);
if ((ctrl_status & CSR_SCSI_RESET_INTR) != 0)
writel(set_rmask(CSR_SCSI_RESET_INTR), &ha->reg->ctrl_status);
/* Issue Soft Reset */
writel(set_rmask(CSR_SOFT_RESET), &ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
/**
* qla4xxx_soft_reset - performs soft reset.
* @ha: Pointer to host adapter structure.
**/
int qla4xxx_soft_reset(struct scsi_qla_host *ha)
{
uint32_t max_wait_time;
unsigned long flags = 0;
int status = QLA_ERROR;
uint32_t ctrl_status;
qla4xxx_hw_reset(ha);
/* Wait until the Network Reset Intr bit is cleared */
max_wait_time = RESET_INTR_TOV;
do {
spin_lock_irqsave(&ha->hardware_lock, flags);
ctrl_status = readw(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if ((ctrl_status & CSR_NET_RESET_INTR) == 0)
break;
msleep(1000);
} while ((--max_wait_time));
if ((ctrl_status & CSR_NET_RESET_INTR) != 0) {
DEBUG2(printk(KERN_WARNING
"scsi%ld: Network Reset Intr not cleared by "
"Network function, clearing it now!\n",
ha->host_no));
spin_lock_irqsave(&ha->hardware_lock, flags);
writel(set_rmask(CSR_NET_RESET_INTR), &ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
/* Wait until the firmware tells us the Soft Reset is done */
max_wait_time = SOFT_RESET_TOV;
do {
spin_lock_irqsave(&ha->hardware_lock, flags);
ctrl_status = readw(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if ((ctrl_status & CSR_SOFT_RESET) == 0) {
status = QLA_SUCCESS;
break;
}
msleep(1000);
} while ((--max_wait_time));
/*
* Also, make sure that the SCSI Reset Interrupt bit has been cleared
* after the soft reset has taken place.
*/
spin_lock_irqsave(&ha->hardware_lock, flags);
ctrl_status = readw(&ha->reg->ctrl_status);
if ((ctrl_status & CSR_SCSI_RESET_INTR) != 0) {
writel(set_rmask(CSR_SCSI_RESET_INTR), &ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* If soft reset fails then most probably the bios on other
* function is also enabled.
* Since the initialization is sequential the other fn
* wont be able to acknowledge the soft reset.
* Issue a force soft reset to workaround this scenario.
*/
if (max_wait_time == 0) {
/* Issue Force Soft Reset */
spin_lock_irqsave(&ha->hardware_lock, flags);
writel(set_rmask(CSR_FORCE_SOFT_RESET), &ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Wait until the firmware tells us the Soft Reset is done */
max_wait_time = SOFT_RESET_TOV;
do {
spin_lock_irqsave(&ha->hardware_lock, flags);
ctrl_status = readw(&ha->reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if ((ctrl_status & CSR_FORCE_SOFT_RESET) == 0) {
status = QLA_SUCCESS;
break;
}
msleep(1000);
} while ((--max_wait_time));
}
return status;
}
/**
* qla4xxx_flush_active_srbs - returns all outstanding i/o requests to O.S.
* @ha: Pointer to host adapter structure.
*
* This routine is called just prior to a HARD RESET to return all
* outstanding commands back to the Operating System.
* Caller should make sure that the following locks are released
* before this calling routine: Hardware lock, and io_request_lock.
**/
static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha)
{
struct srb *srb;
int i;
unsigned long flags;
spin_lock_irqsave(&ha->hardware_lock, flags);
for (i = 0; i < ha->host->can_queue; i++) {
srb = qla4xxx_del_from_active_array(ha, i);
if (srb != NULL) {
srb->cmd->result = DID_RESET << 16;
qla4xxx_srb_compl(ha, srb);
}
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
/**
* qla4xxx_recover_adapter - recovers adapter after a fatal error
* @ha: Pointer to host adapter structure.
* @renew_ddb_list: Indicates what to do with the adapter's ddb list
* after adapter recovery has completed.
* 0=preserve ddb list, 1=destroy and rebuild ddb list
**/
static int qla4xxx_recover_adapter(struct scsi_qla_host *ha,
uint8_t renew_ddb_list)
{
int status;
/* Stall incoming I/O until we are done */
clear_bit(AF_ONLINE, &ha->flags);
DEBUG2(printk("scsi%ld: %s calling qla4xxx_cmd_wait\n", ha->host_no,
__func__));
/* Wait for outstanding commands to complete.
* Stalls the driver for max 30 secs
*/
status = qla4xxx_cmd_wait(ha);
qla4xxx_disable_intrs(ha);
/* Flush any pending ddb changed AENs */
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
/* Reset the firmware. If successful, function
* returns with ISP interrupts enabled.
*/
if (status == QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
ha->host_no, __func__));
qla4xxx_flush_active_srbs(ha);
if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
status = qla4xxx_soft_reset(ha);
else
status = QLA_ERROR;
}
/* Flush any pending ddb changed AENs */
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
/* Re-initialize firmware. If successful, function returns
* with ISP interrupts enabled */
if (status == QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s - Initializing adapter..\n",
ha->host_no, __func__));
/* If successful, AF_ONLINE flag set in
* qla4xxx_initialize_adapter */
status = qla4xxx_initialize_adapter(ha, renew_ddb_list);
}
/* Failed adapter initialization?
* Retry reset_ha only if invoked via DPC (DPC_RESET_HA) */
if ((test_bit(AF_ONLINE, &ha->flags) == 0) &&
(test_bit(DPC_RESET_HA, &ha->dpc_flags))) {
/* Adapter initialization failed, see if we can retry
* resetting the ha */
if (!test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags)) {
ha->retry_reset_ha_cnt = MAX_RESET_HA_RETRIES;
DEBUG2(printk("scsi%ld: recover adapter - retrying "
"(%d) more times\n", ha->host_no,
ha->retry_reset_ha_cnt));
set_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
status = QLA_ERROR;
} else {
if (ha->retry_reset_ha_cnt > 0) {
/* Schedule another Reset HA--DPC will retry */
ha->retry_reset_ha_cnt--;
DEBUG2(printk("scsi%ld: recover adapter - "
"retry remaining %d\n",
ha->host_no,
ha->retry_reset_ha_cnt));
status = QLA_ERROR;
}
if (ha->retry_reset_ha_cnt == 0) {
/* Recover adapter retries have been exhausted.
* Adapter DEAD */
DEBUG2(printk("scsi%ld: recover adapter "
"failed - board disabled\n",
ha->host_no));
qla4xxx_flush_active_srbs(ha);
clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
clear_bit(DPC_RESET_HA, &ha->dpc_flags);
clear_bit(DPC_RESET_HA_DESTROY_DDB_LIST,
&ha->dpc_flags);
status = QLA_ERROR;
}
}
} else {
clear_bit(DPC_RESET_HA, &ha->dpc_flags);
clear_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags);
clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
}
ha->adapter_error_count++;
if (status == QLA_SUCCESS)
qla4xxx_enable_intrs(ha);
DEBUG2(printk("scsi%ld: recover adapter .. DONE\n", ha->host_no));
return status;
}
/**
* qla4xxx_do_dpc - dpc routine
* @data: in our case pointer to adapter structure
*
* This routine is a task that is schedule by the interrupt handler
* to perform the background processing for interrupts. We put it
* on a task queue that is consumed whenever the scheduler runs; that's
* so you can do anything (i.e. put the process to sleep etc). In fact,
* the mid-level tries to sleep when it reaches the driver threshold
* "host->can_queue". This can cause a panic if we were in our interrupt code.
**/
static void qla4xxx_do_dpc(struct work_struct *work)
{
struct scsi_qla_host *ha =
container_of(work, struct scsi_qla_host, dpc_work);
struct ddb_entry *ddb_entry, *dtemp;
int status = QLA_ERROR;
DEBUG2(printk("scsi%ld: %s: DPC handler waking up."
"flags = 0x%08lx, dpc_flags = 0x%08lx ctrl_stat = 0x%08x\n",
ha->host_no, __func__, ha->flags, ha->dpc_flags,
readw(&ha->reg->ctrl_status)));
/* Initialization not yet finished. Don't do anything yet. */
if (!test_bit(AF_INIT_DONE, &ha->flags))
return;
if (adapter_up(ha) ||
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags)) {
if (test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA, &ha->dpc_flags))
qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST);
if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) {
uint8_t wait_time = RESET_INTR_TOV;
while ((readw(&ha->reg->ctrl_status) &
(CSR_SOFT_RESET | CSR_FORCE_SOFT_RESET)) != 0) {
if (--wait_time == 0)
break;
msleep(1000);
}
if (wait_time == 0)
DEBUG2(printk("scsi%ld: %s: SR|FSR "
"bit not cleared-- resetting\n",
ha->host_no, __func__));
qla4xxx_flush_active_srbs(ha);
if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS) {
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
status = qla4xxx_initialize_adapter(ha,
PRESERVE_DDB_LIST);
}
clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags);
if (status == QLA_SUCCESS)
qla4xxx_enable_intrs(ha);
}
}
/* ---- process AEN? --- */
if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags))
qla4xxx_process_aen(ha, PROCESS_ALL_AENS);
/* ---- Get DHCP IP Address? --- */
if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags))
qla4xxx_get_dhcp_ip_address(ha);
/* ---- relogin device? --- */
if (adapter_up(ha) &&
test_and_clear_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags)) {
list_for_each_entry_safe(ddb_entry, dtemp,
&ha->ddb_list, list) {
if (test_and_clear_bit(DF_RELOGIN, &ddb_entry->flags) &&
atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)
qla4xxx_relogin_device(ha, ddb_entry);
/*
* If mbx cmd times out there is no point
* in continuing further.
* With large no of targets this can hang
* the system.
*/
if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
printk(KERN_WARNING "scsi%ld: %s: "
"need to reset hba\n",
ha->host_no, __func__);
break;
}
}
}
}
/**
* qla4xxx_free_adapter - release the adapter
* @ha: pointer to adapter structure
**/
static void qla4xxx_free_adapter(struct scsi_qla_host *ha)
{
if (test_bit(AF_INTERRUPTS_ON, &ha->flags)) {
/* Turn-off interrupts on the card. */
qla4xxx_disable_intrs(ha);
}
/* Kill the kernel thread for this host */
if (ha->dpc_thread)
destroy_workqueue(ha->dpc_thread);
/* Issue Soft Reset to put firmware in unknown state */
if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
qla4xxx_hw_reset(ha);
/* Remove timer thread, if present */
if (ha->timer_active)
qla4xxx_stop_timer(ha);
/* Detach interrupts */
if (test_and_clear_bit(AF_IRQ_ATTACHED, &ha->flags))
free_irq(ha->pdev->irq, ha);
/* free extra memory */
qla4xxx_mem_free(ha);
pci_disable_device(ha->pdev);
}
/***
* qla4xxx_iospace_config - maps registers
* @ha: pointer to adapter structure
*
* This routines maps HBA's registers from the pci address space
* into the kernel virtual address space for memory mapped i/o.
**/
static int qla4xxx_iospace_config(struct scsi_qla_host *ha)
{
unsigned long pio, pio_len, pio_flags;
unsigned long mmio, mmio_len, mmio_flags;
pio = pci_resource_start(ha->pdev, 0);
pio_len = pci_resource_len(ha->pdev, 0);
pio_flags = pci_resource_flags(ha->pdev, 0);
if (pio_flags & IORESOURCE_IO) {
if (pio_len < MIN_IOBASE_LEN) {
dev_warn(&ha->pdev->dev,
"Invalid PCI I/O region size\n");
pio = 0;
}
} else {
dev_warn(&ha->pdev->dev, "region #0 not a PIO resource\n");
pio = 0;
}
/* Use MMIO operations for all accesses. */
mmio = pci_resource_start(ha->pdev, 1);
mmio_len = pci_resource_len(ha->pdev, 1);
mmio_flags = pci_resource_flags(ha->pdev, 1);
if (!(mmio_flags & IORESOURCE_MEM)) {
dev_err(&ha->pdev->dev,
"region #0 not an MMIO resource, aborting\n");
goto iospace_error_exit;
}
if (mmio_len < MIN_IOBASE_LEN) {
dev_err(&ha->pdev->dev,
"Invalid PCI mem region size, aborting\n");
goto iospace_error_exit;
}
if (pci_request_regions(ha->pdev, DRIVER_NAME)) {
dev_warn(&ha->pdev->dev,
"Failed to reserve PIO/MMIO regions\n");
goto iospace_error_exit;
}
ha->pio_address = pio;
ha->pio_length = pio_len;
ha->reg = ioremap(mmio, MIN_IOBASE_LEN);
if (!ha->reg) {
dev_err(&ha->pdev->dev,
"cannot remap MMIO, aborting\n");
goto iospace_error_exit;
}
return 0;
iospace_error_exit:
return -ENOMEM;
}
/**
* qla4xxx_probe_adapter - callback function to probe HBA
* @pdev: pointer to pci_dev structure
* @pci_device_id: pointer to pci_device entry
*
* This routine will probe for Qlogic 4xxx iSCSI host adapters.
* It returns zero if successful. It also initializes all data necessary for
* the driver.
**/
static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int ret = -ENODEV, status;
struct Scsi_Host *host;
struct scsi_qla_host *ha;
struct ddb_entry *ddb_entry, *ddbtemp;
uint8_t init_retry_count = 0;
char buf[34];
if (pci_enable_device(pdev))
return -1;
host = scsi_host_alloc(&qla4xxx_driver_template, sizeof(*ha));
if (host == NULL) {
printk(KERN_WARNING
"qla4xxx: Couldn't allocate host from scsi layer!\n");
goto probe_disable_device;
}
/* Clear our data area */
ha = (struct scsi_qla_host *) host->hostdata;
memset(ha, 0, sizeof(*ha));
/* Save the information from PCI BIOS. */
ha->pdev = pdev;
ha->host = host;
ha->host_no = host->host_no;
/* Configure PCI I/O space. */
ret = qla4xxx_iospace_config(ha);
if (ret)
goto probe_failed;
dev_info(&ha->pdev->dev, "Found an ISP%04x, irq %d, iobase 0x%p\n",
pdev->device, pdev->irq, ha->reg);
qla4xxx_config_dma_addressing(ha);
/* Initialize lists and spinlocks. */
INIT_LIST_HEAD(&ha->ddb_list);
INIT_LIST_HEAD(&ha->free_srb_q);
mutex_init(&ha->mbox_sem);
spin_lock_init(&ha->hardware_lock);
/* Allocate dma buffers */
if (qla4xxx_mem_alloc(ha)) {
dev_warn(&ha->pdev->dev,
"[ERROR] Failed to allocate memory for adapter\n");
ret = -ENOMEM;
goto probe_failed;
}
/*
* Initialize the Host adapter request/response queues and
* firmware
* NOTE: interrupts enabled upon successful completion
*/
status = qla4xxx_initialize_adapter(ha, REBUILD_DDB_LIST);
while (status == QLA_ERROR && init_retry_count++ < MAX_INIT_RETRIES) {
DEBUG2(printk("scsi: %s: retrying adapter initialization "
"(%d)\n", __func__, init_retry_count));
qla4xxx_soft_reset(ha);
status = qla4xxx_initialize_adapter(ha, REBUILD_DDB_LIST);
}
if (status == QLA_ERROR) {
dev_warn(&ha->pdev->dev, "Failed to initialize adapter\n");
ret = -ENODEV;
goto probe_failed;
}
host->cmd_per_lun = 3;
host->max_channel = 0;
host->max_lun = MAX_LUNS - 1;
host->max_id = MAX_TARGETS;
host->max_cmd_len = IOCB_MAX_CDB_LEN;
host->can_queue = MAX_SRBS ;
host->transportt = qla4xxx_scsi_transport;
ret = scsi_init_shared_tag_map(host, MAX_SRBS);
if (ret) {
dev_warn(&ha->pdev->dev, "scsi_init_shared_tag_map failed");
goto probe_failed;
}
/* Startup the kernel thread for this host adapter. */
DEBUG2(printk("scsi: %s: Starting kernel thread for "
"qla4xxx_dpc\n", __func__));
sprintf(buf, "qla4xxx_%lu_dpc", ha->host_no);
ha->dpc_thread = create_singlethread_workqueue(buf);
if (!ha->dpc_thread) {
dev_warn(&ha->pdev->dev, "Unable to start DPC thread!\n");
ret = -ENODEV;
goto probe_failed;
}
INIT_WORK(&ha->dpc_work, qla4xxx_do_dpc);
ret = request_irq(pdev->irq, qla4xxx_intr_handler,
IRQF_DISABLED | IRQF_SHARED, "qla4xxx", ha);
if (ret) {
dev_warn(&ha->pdev->dev, "Failed to reserve interrupt %d"
" already in use.\n", pdev->irq);
goto probe_failed;
}
set_bit(AF_IRQ_ATTACHED, &ha->flags);
host->irq = pdev->irq;
DEBUG(printk("scsi%d: irq %d attached\n", ha->host_no, ha->pdev->irq));
qla4xxx_enable_intrs(ha);
/* Start timer thread. */
qla4xxx_start_timer(ha, qla4xxx_timer, 1);
set_bit(AF_INIT_DONE, &ha->flags);
pci_set_drvdata(pdev, ha);
ret = scsi_add_host(host, &pdev->dev);
if (ret)
goto probe_failed;
/* Update transport device information for all devices. */
list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) {
if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE)
if (qla4xxx_add_sess(ddb_entry))
goto remove_host;
}
printk(KERN_INFO
" QLogic iSCSI HBA Driver version: %s\n"
" QLogic ISP%04x @ %s, host#=%ld, fw=%02d.%02d.%02d.%02d\n",
qla4xxx_version_str, ha->pdev->device, pci_name(ha->pdev),
ha->host_no, ha->firmware_version[0], ha->firmware_version[1],
ha->patch_number, ha->build_number);
return 0;
remove_host:
qla4xxx_free_ddb_list(ha);
scsi_remove_host(host);
probe_failed:
qla4xxx_free_adapter(ha);
scsi_host_put(ha->host);
probe_disable_device:
pci_disable_device(pdev);
return ret;
}
/**
* qla4xxx_remove_adapter - calback function to remove adapter.
* @pci_dev: PCI device pointer
**/
static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev)
{
struct scsi_qla_host *ha;
ha = pci_get_drvdata(pdev);
qla4xxx_disable_intrs(ha);
while (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags))
ssleep(1);
/* remove devs from iscsi_sessions to scsi_devices */
qla4xxx_free_ddb_list(ha);
scsi_remove_host(ha->host);
qla4xxx_free_adapter(ha);
scsi_host_put(ha->host);
pci_set_drvdata(pdev, NULL);
}
/**
* qla4xxx_config_dma_addressing() - Configure OS DMA addressing method.
* @ha: HA context
*
* At exit, the @ha's flags.enable_64bit_addressing set to indicated
* supported addressing method.
*/
static void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha)
{
int retval;
/* Update our PCI device dma_mask for full 64 bit mask */
if (pci_set_dma_mask(ha->pdev, DMA_64BIT_MASK) == 0) {
if (pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
dev_dbg(&ha->pdev->dev,
"Failed to set 64 bit PCI consistent mask; "
"using 32 bit.\n");
retval = pci_set_consistent_dma_mask(ha->pdev,
DMA_32BIT_MASK);
}
} else
retval = pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK);
}
static int qla4xxx_slave_alloc(struct scsi_device *sdev)
{
struct iscsi_cls_session *sess = starget_to_session(sdev->sdev_target);
struct ddb_entry *ddb = sess->dd_data;
sdev->hostdata = ddb;
sdev->tagged_supported = 1;
scsi_activate_tcq(sdev, sdev->host->can_queue);
return 0;
}
static int qla4xxx_slave_configure(struct scsi_device *sdev)
{
sdev->tagged_supported = 1;
return 0;
}
static void qla4xxx_slave_destroy(struct scsi_device *sdev)
{
scsi_deactivate_tcq(sdev, 1);
}
/**
* qla4xxx_del_from_active_array - returns an active srb
* @ha: Pointer to host adapter structure.
* @index: index into to the active_array
*
* This routine removes and returns the srb at the specified index
**/
struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t index)
{
struct srb *srb = NULL;
struct scsi_cmnd *cmd;
if (!(cmd = scsi_host_find_tag(ha->host, index)))
return srb;
if (!(srb = (struct srb *)cmd->host_scribble))
return srb;
/* update counters */
if (srb->flags & SRB_DMA_VALID) {
ha->req_q_count += srb->iocb_cnt;
ha->iocb_cnt -= srb->iocb_cnt;
if (srb->cmd)
srb->cmd->host_scribble = NULL;
}
return srb;
}
/**
* qla4xxx_eh_wait_on_command - waits for command to be returned by firmware
* @ha: actual ha whose done queue will contain the comd returned by firmware.
* @cmd: Scsi Command to wait on.
*
* This routine waits for the command to be returned by the Firmware
* for some max time.
**/
static int qla4xxx_eh_wait_on_command(struct scsi_qla_host *ha,
struct scsi_cmnd *cmd)
{
int done = 0;
struct srb *rp;
uint32_t max_wait_time = EH_WAIT_CMD_TOV;
do {
/* Checking to see if its returned to OS */
rp = (struct srb *) cmd->SCp.ptr;
if (rp == NULL) {
done++;
break;
}
msleep(2000);
} while (max_wait_time--);
return done;
}
/**
* qla4xxx_wait_for_hba_online - waits for HBA to come online
* @ha: Pointer to host adapter structure
**/
static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha)
{
unsigned long wait_online;
wait_online = jiffies + (30 * HZ);
while (time_before(jiffies, wait_online)) {
if (adapter_up(ha))
return QLA_SUCCESS;
else if (ha->retry_reset_ha_cnt == 0)
return QLA_ERROR;
msleep(2000);
}
return QLA_ERROR;
}
/**
* qla4xxx_eh_wait_for_active_target_commands - wait for active cmds to finish.
* @ha: pointer to to HBA
* @t: target id
* @l: lun id
*
* This function waits for all outstanding commands to a lun to complete. It
* returns 0 if all pending commands are returned and 1 otherwise.
**/
static int qla4xxx_eh_wait_for_active_target_commands(struct scsi_qla_host *ha,
int t, int l)
{
int cnt;
int status = 0;
struct scsi_cmnd *cmd;
/*
* Waiting for all commands for the designated target in the active
* array
*/
for (cnt = 0; cnt < ha->host->can_queue; cnt++) {
cmd = scsi_host_find_tag(ha->host, cnt);
if (cmd && cmd->device->id == t && cmd->device->lun == l) {
if (!qla4xxx_eh_wait_on_command(ha, cmd)) {
status++;
break;
}
}
}
return status;
}
/**
* qla4xxx_eh_device_reset - callback for target reset.
* @cmd: Pointer to Linux's SCSI command structure
*
* This routine is called by the Linux OS to reset all luns on the
* specified target.
**/
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd)
{
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
struct ddb_entry *ddb_entry = cmd->device->hostdata;
struct srb *sp;
int ret = FAILED, stat;
sp = (struct srb *) cmd->SCp.ptr;
if (!sp || !ddb_entry)
return ret;
dev_info(&ha->pdev->dev,
"scsi%ld:%d:%d:%d: DEVICE RESET ISSUED.\n", ha->host_no,
cmd->device->channel, cmd->device->id, cmd->device->lun);
DEBUG2(printk(KERN_INFO
"scsi%ld: DEVICE_RESET cmd=%p jiffies = 0x%lx, to=%x,"
"dpc_flags=%lx, status=%x allowed=%d\n", ha->host_no,
cmd, jiffies, cmd->timeout_per_command / HZ,
ha->dpc_flags, cmd->result, cmd->allowed));
/* FIXME: wait for hba to go online */
stat = qla4xxx_reset_lun(ha, ddb_entry, cmd->device->lun);
if (stat != QLA_SUCCESS) {
dev_info(&ha->pdev->dev, "DEVICE RESET FAILED. %d\n", stat);
goto eh_dev_reset_done;
}
/* Send marker. */
ha->marker_needed = 1;
/*
* If we are coming down the EH path, wait for all commands to complete
* for the device.
*/
if (cmd->device->host->shost_state == SHOST_RECOVERY) {
if (qla4xxx_eh_wait_for_active_target_commands(ha,
cmd->device->id,
cmd->device->lun)){
dev_info(&ha->pdev->dev,
"DEVICE RESET FAILED - waiting for "
"commands.\n");
goto eh_dev_reset_done;
}
}
dev_info(&ha->pdev->dev,
"scsi(%ld:%d:%d:%d): DEVICE RESET SUCCEEDED.\n",
ha->host_no, cmd->device->channel, cmd->device->id,
cmd->device->lun);
ret = SUCCESS;
eh_dev_reset_done:
return ret;
}
/**
* qla4xxx_eh_host_reset - kernel callback
* @cmd: Pointer to Linux's SCSI command structure
*
* This routine is invoked by the Linux kernel to perform fatal error
* recovery on the specified adapter.
**/
static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
int return_status = FAILED;
struct scsi_qla_host *ha;
ha = (struct scsi_qla_host *) cmd->device->host->hostdata;
dev_info(&ha->pdev->dev,
"scsi(%ld:%d:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no,
cmd->device->channel, cmd->device->id, cmd->device->lun);
if (qla4xxx_wait_for_hba_online(ha) != QLA_SUCCESS) {
DEBUG2(printk("scsi%ld:%d: %s: Unable to reset host. Adapter "
"DEAD.\n", ha->host_no, cmd->device->channel,
__func__));
return FAILED;
}
if (qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST) == QLA_SUCCESS) {
return_status = SUCCESS;
}
dev_info(&ha->pdev->dev, "HOST RESET %s.\n",
return_status == FAILED ? "FAILED" : "SUCCEDED");
return return_status;
}
static struct pci_device_id qla4xxx_pci_tbl[] = {
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP4010,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP4022,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP4032,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{0, 0},
};
MODULE_DEVICE_TABLE(pci, qla4xxx_pci_tbl);
static struct pci_driver qla4xxx_pci_driver = {
.name = DRIVER_NAME,
.id_table = qla4xxx_pci_tbl,
.probe = qla4xxx_probe_adapter,
.remove = qla4xxx_remove_adapter,
};
static int __init qla4xxx_module_init(void)
{
int ret;
/* Allocate cache for SRBs. */
srb_cachep = kmem_cache_create("qla4xxx_srbs", sizeof(struct srb), 0,
SLAB_HWCACHE_ALIGN, NULL);
if (srb_cachep == NULL) {
printk(KERN_ERR
"%s: Unable to allocate SRB cache..."
"Failing load!\n", DRIVER_NAME);
ret = -ENOMEM;
goto no_srp_cache;
}
/* Derive version string. */
strcpy(qla4xxx_version_str, QLA4XXX_DRIVER_VERSION);
if (ql4xextended_error_logging)
strcat(qla4xxx_version_str, "-debug");
qla4xxx_scsi_transport =
iscsi_register_transport(&qla4xxx_iscsi_transport);
if (!qla4xxx_scsi_transport){
ret = -ENODEV;
goto release_srb_cache;
}
ret = pci_register_driver(&qla4xxx_pci_driver);
if (ret)
goto unregister_transport;
printk(KERN_INFO "QLogic iSCSI HBA Driver\n");
return 0;
unregister_transport:
iscsi_unregister_transport(&qla4xxx_iscsi_transport);
release_srb_cache:
kmem_cache_destroy(srb_cachep);
no_srp_cache:
return ret;
}
static void __exit qla4xxx_module_exit(void)
{
ql4_mod_unload = 1;
pci_unregister_driver(&qla4xxx_pci_driver);
iscsi_unregister_transport(&qla4xxx_iscsi_transport);
kmem_cache_destroy(srb_cachep);
}
module_init(qla4xxx_module_init);
module_exit(qla4xxx_module_exit);
MODULE_AUTHOR("QLogic Corporation");
MODULE_DESCRIPTION("QLogic iSCSI HBA Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(QLA4XXX_DRIVER_VERSION);
Reference in New Issue View Git Blame Copy Permalink