kernel-ark/arch/arm/mach-imx/generic.c
Sascha Hauer 0a5b0aa8a3 [ARM] 2950/1: i.MX gpio setup function
Patch from Sascha Hauer

Current implementation of imx_gpio_mode does not allow to
configure all alternate routing possibilities of the i.MX. With
this patch every bit in the gpio setup registers has a
corresponding bit in the gpio_mode parameter, so every routing
should be possible now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-04 23:17:52 +01:00

292 lines
6.5 KiB
C

/*
* arch/arm/mach-imx/generic.c
*
* author: Sascha Hauer
* Created: april 20th, 2004
* Copyright: Synertronixx GmbH
*
* Common code for i.MX machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/device.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/arch/imxfb.h>
#include <asm/hardware.h>
#include <asm/arch/imx-regs.h>
#include <asm/mach/map.h>
void imx_gpio_mode(int gpio_mode)
{
unsigned int pin = gpio_mode & GPIO_PIN_MASK;
unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
unsigned int tmp;
/* Pullup enable */
if(gpio_mode & GPIO_PUEN)
PUEN(port) |= (1<<pin);
else
PUEN(port) &= ~(1<<pin);
/* Data direction */
if(gpio_mode & GPIO_OUT)
DDIR(port) |= 1<<pin;
else
DDIR(port) &= ~(1<<pin);
/* Primary / alternate function */
if(gpio_mode & GPIO_AF)
GPR(port) |= (1<<pin);
else
GPR(port) &= ~(1<<pin);
/* use as gpio? */
if(gpio_mode & GPIO_GIUS)
GIUS(port) |= (1<<pin);
else
GIUS(port) &= ~(1<<pin);
/* Output / input configuration */
/* FIXME: I'm not very sure about OCR and ICONF, someone
* should have a look over it
*/
if(pin<16) {
tmp = OCR1(port);
tmp &= ~( 3<<(pin*2));
tmp |= (ocr << (pin*2));
OCR1(port) = tmp;
ICONFA1(port) &= ~( 3<<(pin*2));
ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
ICONFB1(port) &= ~( 3<<(pin*2));
ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
} else {
tmp = OCR2(port);
tmp &= ~( 3<<((pin-16)*2));
tmp |= (ocr << ((pin-16)*2));
OCR2(port) = tmp;
ICONFA2(port) &= ~( 3<<((pin-16)*2));
ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
ICONFB2(port) &= ~( 3<<((pin-16)*2));
ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
}
}
EXPORT_SYMBOL(imx_gpio_mode);
/*
* get the system pll clock in Hz
*
* mfi + mfn / (mfd +1)
* f = 2 * f_ref * --------------------
* pd + 1
*/
static unsigned int imx_decode_pll(unsigned int pll)
{
u32 mfi = (pll >> 10) & 0xf;
u32 mfn = pll & 0x3ff;
u32 mfd = (pll >> 16) & 0x3ff;
u32 pd = (pll >> 26) & 0xf;
u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
mfi = mfi <= 5 ? 5 : mfi;
return (2 * (f_ref>>10) * ( (mfi<<10) + (mfn<<10) / (mfd+1) )) / (pd+1);
}
unsigned int imx_get_system_clk(void)
{
return imx_decode_pll(SPCTL0);
}
EXPORT_SYMBOL(imx_get_system_clk);
unsigned int imx_get_mcu_clk(void)
{
return imx_decode_pll(MPCTL0);
}
EXPORT_SYMBOL(imx_get_mcu_clk);
/*
* get peripheral clock 1 ( UART[12], Timer[12], PWM )
*/
unsigned int imx_get_perclk1(void)
{
return imx_get_system_clk() / (((PCDR) & 0xf)+1);
}
EXPORT_SYMBOL(imx_get_perclk1);
/*
* get peripheral clock 2 ( LCD, SD, SPI[12] )
*/
unsigned int imx_get_perclk2(void)
{
return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
}
EXPORT_SYMBOL(imx_get_perclk2);
/*
* get peripheral clock 3 ( SSI )
*/
unsigned int imx_get_perclk3(void)
{
return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
}
EXPORT_SYMBOL(imx_get_perclk3);
/*
* get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
*/
unsigned int imx_get_hclk(void)
{
return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
}
EXPORT_SYMBOL(imx_get_hclk);
static struct resource imx_mmc_resources[] = {
[0] = {
.start = 0x00214000,
.end = 0x002140FF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (SDHC_INT),
.end = (SDHC_INT),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device imx_mmc_device = {
.name = "imx-mmc",
.id = 0,
.num_resources = ARRAY_SIZE(imx_mmc_resources),
.resource = imx_mmc_resources,
};
static struct resource imx_uart1_resources[] = {
[0] = {
.start = 0x00206000,
.end = 0x002060FF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (UART1_MINT_RX),
.end = (UART1_MINT_RX),
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = (UART1_MINT_TX),
.end = (UART1_MINT_TX),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device imx_uart1_device = {
.name = "imx-uart",
.id = 0,
.num_resources = ARRAY_SIZE(imx_uart1_resources),
.resource = imx_uart1_resources,
};
static struct resource imx_uart2_resources[] = {
[0] = {
.start = 0x00207000,
.end = 0x002070FF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (UART2_MINT_RX),
.end = (UART2_MINT_RX),
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = (UART2_MINT_TX),
.end = (UART2_MINT_TX),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device imx_uart2_device = {
.name = "imx-uart",
.id = 1,
.num_resources = ARRAY_SIZE(imx_uart2_resources),
.resource = imx_uart2_resources,
};
static struct imxfb_mach_info imx_fb_info;
void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
{
memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
}
EXPORT_SYMBOL(set_imx_fb_info);
static struct resource imxfb_resources[] = {
[0] = {
.start = 0x00205000,
.end = 0x002050FF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = LCDC_INT,
.end = LCDC_INT,
.flags = IORESOURCE_IRQ,
},
};
static u64 fb_dma_mask = ~(u64)0;
static struct platform_device imxfb_device = {
.name = "imx-fb",
.id = 0,
.dev = {
.platform_data = &imx_fb_info,
.dma_mask = &fb_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(imxfb_resources),
.resource = imxfb_resources,
};
static struct platform_device *devices[] __initdata = {
&imx_mmc_device,
&imxfb_device,
&imx_uart1_device,
&imx_uart2_device,
};
static struct map_desc imx_io_desc[] __initdata = {
/* virtual physical length type */
{IMX_IO_BASE, IMX_IO_PHYS, IMX_IO_SIZE, MT_DEVICE},
};
void __init
imx_map_io(void)
{
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
static int __init imx_init(void)
{
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
subsys_initcall(imx_init);