75e613cdc7
Pascal reported and bisected a commit: | x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case which broke one system system. ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space it didn't have PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 anymore, and try to use 0xf000000 - 0xffffffff for mmconfig For 32bit, mcfg_res->end could be 32bit only (if 64 resources aren't used) So use end - 1 to pass the value in mcfg->end to avoid overflow. We don't need to worry about the e820 path, they are always 64 bit. Reported-by: Pascal Terjan <pterjan@mandriva.com> Bisected-by: Pascal Terjan <pterjan@mandriva.com> Tested-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
605 lines
14 KiB
C
605 lines
14 KiB
C
/*
|
|
* mmconfig-shared.c - Low-level direct PCI config space access via
|
|
* MMCONFIG - common code between i386 and x86-64.
|
|
*
|
|
* This code does:
|
|
* - known chipset handling
|
|
* - ACPI decoding and validation
|
|
*
|
|
* Per-architecture code takes care of the mappings and accesses
|
|
* themselves.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/bitmap.h>
|
|
#include <linux/sort.h>
|
|
#include <asm/e820.h>
|
|
#include <asm/pci_x86.h>
|
|
|
|
/* aperture is up to 256MB but BIOS may reserve less */
|
|
#define MMCONFIG_APER_MIN (2 * 1024*1024)
|
|
#define MMCONFIG_APER_MAX (256 * 1024*1024)
|
|
|
|
/* Indicate if the mmcfg resources have been placed into the resource table. */
|
|
static int __initdata pci_mmcfg_resources_inserted;
|
|
|
|
static __init int extend_mmcfg(int num)
|
|
{
|
|
struct acpi_mcfg_allocation *new;
|
|
int new_num = pci_mmcfg_config_num + num;
|
|
|
|
new = kzalloc(sizeof(pci_mmcfg_config[0]) * new_num, GFP_KERNEL);
|
|
if (!new)
|
|
return -1;
|
|
|
|
if (pci_mmcfg_config) {
|
|
memcpy(new, pci_mmcfg_config,
|
|
sizeof(pci_mmcfg_config[0]) * new_num);
|
|
kfree(pci_mmcfg_config);
|
|
}
|
|
pci_mmcfg_config = new;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __init void fill_one_mmcfg(u64 addr, int segment, int start, int end)
|
|
{
|
|
int i = pci_mmcfg_config_num;
|
|
|
|
pci_mmcfg_config_num++;
|
|
pci_mmcfg_config[i].address = addr;
|
|
pci_mmcfg_config[i].pci_segment = segment;
|
|
pci_mmcfg_config[i].start_bus_number = start;
|
|
pci_mmcfg_config[i].end_bus_number = end;
|
|
}
|
|
|
|
static const char __init *pci_mmcfg_e7520(void)
|
|
{
|
|
u32 win;
|
|
raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0xce, 2, &win);
|
|
|
|
win = win & 0xf000;
|
|
if (win == 0x0000 || win == 0xf000)
|
|
return NULL;
|
|
|
|
if (extend_mmcfg(1) == -1)
|
|
return NULL;
|
|
|
|
fill_one_mmcfg(win << 16, 0, 0, 255);
|
|
|
|
return "Intel Corporation E7520 Memory Controller Hub";
|
|
}
|
|
|
|
static const char __init *pci_mmcfg_intel_945(void)
|
|
{
|
|
u32 pciexbar, mask = 0, len = 0;
|
|
|
|
raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0x48, 4, &pciexbar);
|
|
|
|
/* Enable bit */
|
|
if (!(pciexbar & 1))
|
|
return NULL;
|
|
|
|
/* Size bits */
|
|
switch ((pciexbar >> 1) & 3) {
|
|
case 0:
|
|
mask = 0xf0000000U;
|
|
len = 0x10000000U;
|
|
break;
|
|
case 1:
|
|
mask = 0xf8000000U;
|
|
len = 0x08000000U;
|
|
break;
|
|
case 2:
|
|
mask = 0xfc000000U;
|
|
len = 0x04000000U;
|
|
break;
|
|
default:
|
|
return NULL;
|
|
}
|
|
|
|
/* Errata #2, things break when not aligned on a 256Mb boundary */
|
|
/* Can only happen in 64M/128M mode */
|
|
|
|
if ((pciexbar & mask) & 0x0fffffffU)
|
|
return NULL;
|
|
|
|
/* Don't hit the APIC registers and their friends */
|
|
if ((pciexbar & mask) >= 0xf0000000U)
|
|
return NULL;
|
|
|
|
if (extend_mmcfg(1) == -1)
|
|
return NULL;
|
|
|
|
fill_one_mmcfg(pciexbar & mask, 0, 0, (len >> 20) - 1);
|
|
|
|
return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
|
|
}
|
|
|
|
static const char __init *pci_mmcfg_amd_fam10h(void)
|
|
{
|
|
u32 low, high, address;
|
|
u64 base, msr;
|
|
int i;
|
|
unsigned segnbits = 0, busnbits;
|
|
|
|
if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF))
|
|
return NULL;
|
|
|
|
address = MSR_FAM10H_MMIO_CONF_BASE;
|
|
if (rdmsr_safe(address, &low, &high))
|
|
return NULL;
|
|
|
|
msr = high;
|
|
msr <<= 32;
|
|
msr |= low;
|
|
|
|
/* mmconfig is not enable */
|
|
if (!(msr & FAM10H_MMIO_CONF_ENABLE))
|
|
return NULL;
|
|
|
|
base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
|
|
|
|
busnbits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
|
|
FAM10H_MMIO_CONF_BUSRANGE_MASK;
|
|
|
|
/*
|
|
* only handle bus 0 ?
|
|
* need to skip it
|
|
*/
|
|
if (!busnbits)
|
|
return NULL;
|
|
|
|
if (busnbits > 8) {
|
|
segnbits = busnbits - 8;
|
|
busnbits = 8;
|
|
}
|
|
|
|
if (extend_mmcfg(1 << segnbits) == -1)
|
|
return NULL;
|
|
|
|
for (i = 0; i < (1 << segnbits); i++)
|
|
fill_one_mmcfg(base + (1<<28) * i, i, 0, (1 << busnbits) - 1);
|
|
|
|
return "AMD Family 10h NB";
|
|
}
|
|
|
|
static bool __initdata mcp55_checked;
|
|
static const char __init *pci_mmcfg_nvidia_mcp55(void)
|
|
{
|
|
int bus;
|
|
int mcp55_mmconf_found = 0;
|
|
|
|
static const u32 extcfg_regnum = 0x90;
|
|
static const u32 extcfg_regsize = 4;
|
|
static const u32 extcfg_enable_mask = 1<<31;
|
|
static const u32 extcfg_start_mask = 0xff<<16;
|
|
static const int extcfg_start_shift = 16;
|
|
static const u32 extcfg_size_mask = 0x3<<28;
|
|
static const int extcfg_size_shift = 28;
|
|
static const int extcfg_sizebus[] = {0x100, 0x80, 0x40, 0x20};
|
|
static const u32 extcfg_base_mask[] = {0x7ff8, 0x7ffc, 0x7ffe, 0x7fff};
|
|
static const int extcfg_base_lshift = 25;
|
|
|
|
/*
|
|
* do check if amd fam10h already took over
|
|
*/
|
|
if (!acpi_disabled || pci_mmcfg_config_num || mcp55_checked)
|
|
return NULL;
|
|
|
|
mcp55_checked = true;
|
|
for (bus = 0; bus < 256; bus++) {
|
|
u64 base;
|
|
u32 l, extcfg;
|
|
u16 vendor, device;
|
|
int start, size_index, end;
|
|
|
|
raw_pci_ops->read(0, bus, PCI_DEVFN(0, 0), 0, 4, &l);
|
|
vendor = l & 0xffff;
|
|
device = (l >> 16) & 0xffff;
|
|
|
|
if (PCI_VENDOR_ID_NVIDIA != vendor || 0x0369 != device)
|
|
continue;
|
|
|
|
raw_pci_ops->read(0, bus, PCI_DEVFN(0, 0), extcfg_regnum,
|
|
extcfg_regsize, &extcfg);
|
|
|
|
if (!(extcfg & extcfg_enable_mask))
|
|
continue;
|
|
|
|
if (extend_mmcfg(1) == -1)
|
|
continue;
|
|
|
|
size_index = (extcfg & extcfg_size_mask) >> extcfg_size_shift;
|
|
base = extcfg & extcfg_base_mask[size_index];
|
|
/* base could > 4G */
|
|
base <<= extcfg_base_lshift;
|
|
start = (extcfg & extcfg_start_mask) >> extcfg_start_shift;
|
|
end = start + extcfg_sizebus[size_index] - 1;
|
|
fill_one_mmcfg(base, 0, start, end);
|
|
mcp55_mmconf_found++;
|
|
}
|
|
|
|
if (!mcp55_mmconf_found)
|
|
return NULL;
|
|
|
|
return "nVidia MCP55";
|
|
}
|
|
|
|
struct pci_mmcfg_hostbridge_probe {
|
|
u32 bus;
|
|
u32 devfn;
|
|
u32 vendor;
|
|
u32 device;
|
|
const char *(*probe)(void);
|
|
};
|
|
|
|
static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
|
|
{ 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
|
|
PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
|
|
{ 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
|
|
PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
|
|
{ 0, PCI_DEVFN(0x18, 0), PCI_VENDOR_ID_AMD,
|
|
0x1200, pci_mmcfg_amd_fam10h },
|
|
{ 0xff, PCI_DEVFN(0, 0), PCI_VENDOR_ID_AMD,
|
|
0x1200, pci_mmcfg_amd_fam10h },
|
|
{ 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_NVIDIA,
|
|
0x0369, pci_mmcfg_nvidia_mcp55 },
|
|
};
|
|
|
|
static int __init cmp_mmcfg(const void *x1, const void *x2)
|
|
{
|
|
const typeof(pci_mmcfg_config[0]) *m1 = x1;
|
|
const typeof(pci_mmcfg_config[0]) *m2 = x2;
|
|
int start1, start2;
|
|
|
|
start1 = m1->start_bus_number;
|
|
start2 = m2->start_bus_number;
|
|
|
|
return start1 - start2;
|
|
}
|
|
|
|
static void __init pci_mmcfg_check_end_bus_number(void)
|
|
{
|
|
int i;
|
|
typeof(pci_mmcfg_config[0]) *cfg, *cfgx;
|
|
|
|
/* sort them at first */
|
|
sort(pci_mmcfg_config, pci_mmcfg_config_num,
|
|
sizeof(pci_mmcfg_config[0]), cmp_mmcfg, NULL);
|
|
|
|
/* last one*/
|
|
if (pci_mmcfg_config_num > 0) {
|
|
i = pci_mmcfg_config_num - 1;
|
|
cfg = &pci_mmcfg_config[i];
|
|
if (cfg->end_bus_number < cfg->start_bus_number)
|
|
cfg->end_bus_number = 255;
|
|
}
|
|
|
|
/* don't overlap please */
|
|
for (i = 0; i < pci_mmcfg_config_num - 1; i++) {
|
|
cfg = &pci_mmcfg_config[i];
|
|
cfgx = &pci_mmcfg_config[i+1];
|
|
|
|
if (cfg->end_bus_number < cfg->start_bus_number)
|
|
cfg->end_bus_number = 255;
|
|
|
|
if (cfg->end_bus_number >= cfgx->start_bus_number)
|
|
cfg->end_bus_number = cfgx->start_bus_number - 1;
|
|
}
|
|
}
|
|
|
|
static int __init pci_mmcfg_check_hostbridge(void)
|
|
{
|
|
u32 l;
|
|
u32 bus, devfn;
|
|
u16 vendor, device;
|
|
int i;
|
|
const char *name;
|
|
|
|
if (!raw_pci_ops)
|
|
return 0;
|
|
|
|
pci_mmcfg_config_num = 0;
|
|
pci_mmcfg_config = NULL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
|
|
bus = pci_mmcfg_probes[i].bus;
|
|
devfn = pci_mmcfg_probes[i].devfn;
|
|
raw_pci_ops->read(0, bus, devfn, 0, 4, &l);
|
|
vendor = l & 0xffff;
|
|
device = (l >> 16) & 0xffff;
|
|
|
|
name = NULL;
|
|
if (pci_mmcfg_probes[i].vendor == vendor &&
|
|
pci_mmcfg_probes[i].device == device)
|
|
name = pci_mmcfg_probes[i].probe();
|
|
|
|
if (name)
|
|
printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n",
|
|
name);
|
|
}
|
|
|
|
/* some end_bus_number is crazy, fix it */
|
|
pci_mmcfg_check_end_bus_number();
|
|
|
|
return pci_mmcfg_config_num != 0;
|
|
}
|
|
|
|
static void __init pci_mmcfg_insert_resources(void)
|
|
{
|
|
#define PCI_MMCFG_RESOURCE_NAME_LEN 24
|
|
int i;
|
|
struct resource *res;
|
|
char *names;
|
|
unsigned num_buses;
|
|
|
|
res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
|
|
pci_mmcfg_config_num, GFP_KERNEL);
|
|
if (!res) {
|
|
printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
|
|
return;
|
|
}
|
|
|
|
names = (void *)&res[pci_mmcfg_config_num];
|
|
for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
|
|
struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i];
|
|
num_buses = cfg->end_bus_number - cfg->start_bus_number + 1;
|
|
res->name = names;
|
|
snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN,
|
|
"PCI MMCONFIG %u [%02x-%02x]", cfg->pci_segment,
|
|
cfg->start_bus_number, cfg->end_bus_number);
|
|
res->start = cfg->address + (cfg->start_bus_number << 20);
|
|
res->end = res->start + (num_buses << 20) - 1;
|
|
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
|
|
insert_resource(&iomem_resource, res);
|
|
names += PCI_MMCFG_RESOURCE_NAME_LEN;
|
|
}
|
|
|
|
/* Mark that the resources have been inserted. */
|
|
pci_mmcfg_resources_inserted = 1;
|
|
}
|
|
|
|
static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
|
|
void *data)
|
|
{
|
|
struct resource *mcfg_res = data;
|
|
struct acpi_resource_address64 address;
|
|
acpi_status status;
|
|
|
|
if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) {
|
|
struct acpi_resource_fixed_memory32 *fixmem32 =
|
|
&res->data.fixed_memory32;
|
|
if (!fixmem32)
|
|
return AE_OK;
|
|
if ((mcfg_res->start >= fixmem32->address) &&
|
|
(mcfg_res->end < (fixmem32->address +
|
|
fixmem32->address_length))) {
|
|
mcfg_res->flags = 1;
|
|
return AE_CTRL_TERMINATE;
|
|
}
|
|
}
|
|
if ((res->type != ACPI_RESOURCE_TYPE_ADDRESS32) &&
|
|
(res->type != ACPI_RESOURCE_TYPE_ADDRESS64))
|
|
return AE_OK;
|
|
|
|
status = acpi_resource_to_address64(res, &address);
|
|
if (ACPI_FAILURE(status) ||
|
|
(address.address_length <= 0) ||
|
|
(address.resource_type != ACPI_MEMORY_RANGE))
|
|
return AE_OK;
|
|
|
|
if ((mcfg_res->start >= address.minimum) &&
|
|
(mcfg_res->end < (address.minimum + address.address_length))) {
|
|
mcfg_res->flags = 1;
|
|
return AE_CTRL_TERMINATE;
|
|
}
|
|
return AE_OK;
|
|
}
|
|
|
|
static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
|
|
void *context, void **rv)
|
|
{
|
|
struct resource *mcfg_res = context;
|
|
|
|
acpi_walk_resources(handle, METHOD_NAME__CRS,
|
|
check_mcfg_resource, context);
|
|
|
|
if (mcfg_res->flags)
|
|
return AE_CTRL_TERMINATE;
|
|
|
|
return AE_OK;
|
|
}
|
|
|
|
static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
|
|
{
|
|
struct resource mcfg_res;
|
|
|
|
mcfg_res.start = start;
|
|
mcfg_res.end = end - 1;
|
|
mcfg_res.flags = 0;
|
|
|
|
acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL);
|
|
|
|
if (!mcfg_res.flags)
|
|
acpi_get_devices("PNP0C02", find_mboard_resource, &mcfg_res,
|
|
NULL);
|
|
|
|
return mcfg_res.flags;
|
|
}
|
|
|
|
typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
|
|
|
|
static int __init is_mmconf_reserved(check_reserved_t is_reserved,
|
|
u64 addr, u64 size, int i,
|
|
typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
|
|
{
|
|
u64 old_size = size;
|
|
int valid = 0;
|
|
|
|
while (!is_reserved(addr, addr + size, E820_RESERVED)) {
|
|
size >>= 1;
|
|
if (size < (16UL<<20))
|
|
break;
|
|
}
|
|
|
|
if (size >= (16UL<<20) || size == old_size) {
|
|
printk(KERN_NOTICE
|
|
"PCI: MCFG area at %Lx reserved in %s\n",
|
|
addr, with_e820?"E820":"ACPI motherboard resources");
|
|
valid = 1;
|
|
|
|
if (old_size != size) {
|
|
/* update end_bus_number */
|
|
cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
|
|
printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
|
|
"segment %hu buses %u - %u\n",
|
|
i, (unsigned long)cfg->address, cfg->pci_segment,
|
|
(unsigned int)cfg->start_bus_number,
|
|
(unsigned int)cfg->end_bus_number);
|
|
}
|
|
}
|
|
|
|
return valid;
|
|
}
|
|
|
|
static void __init pci_mmcfg_reject_broken(int early)
|
|
{
|
|
typeof(pci_mmcfg_config[0]) *cfg;
|
|
int i;
|
|
|
|
if ((pci_mmcfg_config_num == 0) ||
|
|
(pci_mmcfg_config == NULL) ||
|
|
(pci_mmcfg_config[0].address == 0))
|
|
return;
|
|
|
|
for (i = 0; i < pci_mmcfg_config_num; i++) {
|
|
int valid = 0;
|
|
u64 addr, size;
|
|
|
|
cfg = &pci_mmcfg_config[i];
|
|
addr = cfg->start_bus_number;
|
|
addr <<= 20;
|
|
addr += cfg->address;
|
|
size = cfg->end_bus_number + 1 - cfg->start_bus_number;
|
|
size <<= 20;
|
|
printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
|
|
"segment %hu buses %u - %u\n",
|
|
i, (unsigned long)cfg->address, cfg->pci_segment,
|
|
(unsigned int)cfg->start_bus_number,
|
|
(unsigned int)cfg->end_bus_number);
|
|
|
|
if (!early)
|
|
valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
|
|
|
|
if (valid)
|
|
continue;
|
|
|
|
if (!early)
|
|
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
|
|
" reserved in ACPI motherboard resources\n",
|
|
cfg->address);
|
|
|
|
/* Don't try to do this check unless configuration
|
|
type 1 is available. how about type 2 ?*/
|
|
if (raw_pci_ops)
|
|
valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
|
|
|
|
if (!valid)
|
|
goto reject;
|
|
}
|
|
|
|
return;
|
|
|
|
reject:
|
|
printk(KERN_INFO "PCI: Not using MMCONFIG.\n");
|
|
pci_mmcfg_arch_free();
|
|
kfree(pci_mmcfg_config);
|
|
pci_mmcfg_config = NULL;
|
|
pci_mmcfg_config_num = 0;
|
|
}
|
|
|
|
static int __initdata known_bridge;
|
|
|
|
static void __init __pci_mmcfg_init(int early)
|
|
{
|
|
/* MMCONFIG disabled */
|
|
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
|
|
return;
|
|
|
|
/* MMCONFIG already enabled */
|
|
if (!early && !(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
|
|
return;
|
|
|
|
/* for late to exit */
|
|
if (known_bridge)
|
|
return;
|
|
|
|
if (early) {
|
|
if (pci_mmcfg_check_hostbridge())
|
|
known_bridge = 1;
|
|
}
|
|
|
|
if (!known_bridge)
|
|
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
|
|
|
|
pci_mmcfg_reject_broken(early);
|
|
|
|
if ((pci_mmcfg_config_num == 0) ||
|
|
(pci_mmcfg_config == NULL) ||
|
|
(pci_mmcfg_config[0].address == 0))
|
|
return;
|
|
|
|
if (pci_mmcfg_arch_init())
|
|
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
|
|
else {
|
|
/*
|
|
* Signal not to attempt to insert mmcfg resources because
|
|
* the architecture mmcfg setup could not initialize.
|
|
*/
|
|
pci_mmcfg_resources_inserted = 1;
|
|
}
|
|
}
|
|
|
|
void __init pci_mmcfg_early_init(void)
|
|
{
|
|
__pci_mmcfg_init(1);
|
|
}
|
|
|
|
void __init pci_mmcfg_late_init(void)
|
|
{
|
|
__pci_mmcfg_init(0);
|
|
}
|
|
|
|
static int __init pci_mmcfg_late_insert_resources(void)
|
|
{
|
|
/*
|
|
* If resources are already inserted or we are not using MMCONFIG,
|
|
* don't insert the resources.
|
|
*/
|
|
if ((pci_mmcfg_resources_inserted == 1) ||
|
|
(pci_probe & PCI_PROBE_MMCONF) == 0 ||
|
|
(pci_mmcfg_config_num == 0) ||
|
|
(pci_mmcfg_config == NULL) ||
|
|
(pci_mmcfg_config[0].address == 0))
|
|
return 1;
|
|
|
|
/*
|
|
* Attempt to insert the mmcfg resources but not with the busy flag
|
|
* marked so it won't cause request errors when __request_region is
|
|
* called.
|
|
*/
|
|
pci_mmcfg_insert_resources();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Perform MMCONFIG resource insertion after PCI initialization to allow for
|
|
* misprogrammed MCFG tables that state larger sizes but actually conflict
|
|
* with other system resources.
|
|
*/
|
|
late_initcall(pci_mmcfg_late_insert_resources);
|