Or Gerlitz 096335b3f9 mlx4_core: Allow dynamic MTU configuration for IB ports ... Set the MTU for IB ports in the driver instead of using the firmware default of 2KB (the driver defaults to 4KB). Allow for dynamic mtu configuration through a new, per-port sysfs entry. Since there's a dependency between the port MTU and the max number of HW VLs the port can support, apply a mim/max approach, using a loop that goes down from the highest possible number of VLs to the lowest, using the firmware return status to know whether the requested number of VLs is possible with a given MTU. For now, as with the dynamic link type change / VPI support, the sysfs entry to change the mtu is exposed only when NOT running in SR-IOV mode. To allow changing the MTU for the master in SR-IOV mode, primary-function-initiated FLR (Function Level Reset) needs to be implemented. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>		2012-03-12 16:24:59 -07:00
..
cmd.h	mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet	2011-12-13 13:56:08 -05:00
cq.h
device.h	mlx4_core: Allow dynamic MTU configuration for IB ports	2012-03-12 16:24:59 -07:00
doorbell.h
driver.h
qp.h	net/mlx4_en: adding loopback support	2011-11-27 17:17:04 -05:00
srq.h