kernel-ark/include/linux/atmmpc.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

126 lines
4.1 KiB
C

#ifndef _ATMMPC_H_
#define _ATMMPC_H_
#include <linux/atmapi.h>
#include <linux/atmioc.h>
#include <linux/atm.h>
#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA)
#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1)
#define MPC_SOCKET_INGRESS 1
#define MPC_SOCKET_EGRESS 2
struct atmmpc_ioc {
int dev_num;
uint32_t ipaddr; /* the IP address of the shortcut */
int type; /* ingress or egress */
};
typedef struct in_ctrl_info {
uint8_t Last_NHRP_CIE_code;
uint8_t Last_Q2931_cause_value;
uint8_t eg_MPC_ATM_addr[ATM_ESA_LEN];
uint32_t tag;
uint32_t in_dst_ip; /* IP address this ingress MPC sends packets to */
uint16_t holding_time;
uint32_t request_id;
} in_ctrl_info;
typedef struct eg_ctrl_info {
uint8_t DLL_header[256];
uint8_t DH_length;
uint32_t cache_id;
uint32_t tag;
uint32_t mps_ip;
uint32_t eg_dst_ip; /* IP address to which ingress MPC sends packets */
uint8_t in_MPC_data_ATM_addr[ATM_ESA_LEN];
uint16_t holding_time;
} eg_ctrl_info;
struct mpc_parameters {
uint16_t mpc_p1; /* Shortcut-Setup Frame Count */
uint16_t mpc_p2; /* Shortcut-Setup Frame Time */
uint8_t mpc_p3[8]; /* Flow-detection Protocols */
uint16_t mpc_p4; /* MPC Initial Retry Time */
uint16_t mpc_p5; /* MPC Retry Time Maximum */
uint16_t mpc_p6; /* Hold Down Time */
} ;
struct k_message {
uint16_t type;
uint32_t ip_mask;
uint8_t MPS_ctrl[ATM_ESA_LEN];
union {
in_ctrl_info in_info;
eg_ctrl_info eg_info;
struct mpc_parameters params;
} content;
struct atm_qos qos;
} __ATM_API_ALIGN;
struct llc_snap_hdr {
/* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */
uint8_t dsap; /* Destination Service Access Point (0xAA) */
uint8_t ssap; /* Source Service Access Point (0xAA) */
uint8_t ui; /* Unnumbered Information (0x03) */
uint8_t org[3]; /* Organizational identification (0x000000) */
uint8_t type[2]; /* Ether type (for IP) (0x0800) */
};
/* TLVs this MPC recognizes */
#define TLV_MPOA_DEVICE_TYPE 0x00a03e2a
/* MPOA device types in MPOA Device Type TLV */
#define NON_MPOA 0
#define MPS 1
#define MPC 2
#define MPS_AND_MPC 3
/* MPC parameter defaults */
#define MPC_P1 10 /* Shortcut-Setup Frame Count */
#define MPC_P2 1 /* Shortcut-Setup Frame Time */
#define MPC_P3 0 /* Flow-detection Protocols */
#define MPC_P4 5 /* MPC Initial Retry Time */
#define MPC_P5 40 /* MPC Retry Time Maximum */
#define MPC_P6 160 /* Hold Down Time */
#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */
/* MPC constants */
#define MPC_C1 2 /* Retry Time Multiplier */
#define MPC_C2 60 /* Initial Keep-Alive Lifetime */
/* Message types - to MPOA daemon */
#define SND_MPOA_RES_RQST 201
#define SET_MPS_CTRL_ADDR 202
#define SND_MPOA_RES_RTRY 203 /* Different type in a retry due to req id */
#define STOP_KEEP_ALIVE_SM 204
#define EGRESS_ENTRY_REMOVED 205
#define SND_EGRESS_PURGE 206
#define DIE 207 /* tell the daemon to exit() */
#define DATA_PLANE_PURGE 208 /* Data plane purge because of egress cache hit miss or dead MPS */
#define OPEN_INGRESS_SVC 209
/* Message types - from MPOA daemon */
#define MPOA_TRIGGER_RCVD 101
#define MPOA_RES_REPLY_RCVD 102
#define INGRESS_PURGE_RCVD 103
#define EGRESS_PURGE_RCVD 104
#define MPS_DEATH 105
#define CACHE_IMPOS_RCVD 106
#define SET_MPC_CTRL_ADDR 107 /* Our MPC's control ATM address */
#define SET_MPS_MAC_ADDR 108
#define CLEAN_UP_AND_EXIT 109
#define SET_MPC_PARAMS 110 /* MPC configuration parameters */
/* Message types - bidirectional */
#define RELOAD 301 /* kill -HUP the daemon for reload */
#endif /* _ATMMPC_H_ */