kernel-ark/arch/avr32/Makefile
Alex Raimondi dd5e1339e5 avr32: Hammerhead board support
The Hammerhead platform is built around a AVR32 32-bit microcontroller
from Atmel.  It offers versatile peripherals, such as ethernet, usb
device, usb host etc.

The board also incooperates a power supply and is a Power over Ethernet
(PoE) Powered Device (PD).

Additonally, a Cyclone III FPGA from Altera is integrated on the board.
The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
DDR2 SDRAM interfaces, which will cover even the most exceptional need
of memory bandwidth. Together with the onboard video decoder the board
is ready for video processing.

This patch does include the basic support for the fpga device driver,
but not the device driver itself.

Signed-off-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-05 15:52:04 +01:00

86 lines
2.6 KiB
Makefile

#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 2004-2006 Atmel Corporation.
# Default target when executing plain make
.PHONY: all
all: uImage vmlinux.elf
KBUILD_DEFCONFIG := atstk1002_defconfig
KBUILD_CFLAGS += -pipe -fno-builtin -mno-pic
KBUILD_AFLAGS += -mrelax -mno-pic
CFLAGS_MODULE += -mno-relax
LDFLAGS_vmlinux += --relax
cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap
KBUILD_CFLAGS += $(cpuflags-y)
KBUILD_AFLAGS += $(cpuflags-y)
CHECKFLAGS += -D__avr32__ -D__BIG_ENDIAN
machine-$(CONFIG_PLATFORM_AT32AP) := at32ap
machdirs := $(patsubst %,arch/avr32/mach-%/, $(machine-y))
KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs))
head-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/head.o
head-y += arch/avr32/kernel/head.o
core-y += $(machdirs)
core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/
core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
core-$(CONFIG_BOARD_HAMMERHEAD) += arch/avr32/boards/hammerhead/
core-$(CONFIG_BOARD_FAVR_32) += arch/avr32/boards/favr-32/
core-$(CONFIG_BOARD_MIMC200) += arch/avr32/boards/mimc200/
core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
core-y += arch/avr32/kernel/
core-y += arch/avr32/mm/
drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
libs-y += arch/avr32/lib/
CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
.PHONY: $(BOOT_TARGETS) install
boot := arch/$(ARCH)/boot/images
KBUILD_IMAGE := $(boot)/uImage
vmlinux.elf: KBUILD_IMAGE := $(boot)/vmlinux.elf
vmlinux.cso: KBUILD_IMAGE := $(boot)/vmlinux.cso
uImage.srec: KBUILD_IMAGE := $(boot)/uImage.srec
uImage: KBUILD_IMAGE := $(boot)/uImage
quiet_cmd_listing = LST $@
cmd_listing = avr32-linux-objdump $(OBJDUMPFLAGS) -lS $< > $@
quiet_cmd_disasm = DIS $@
cmd_disasm = avr32-linux-objdump $(OBJDUMPFLAGS) -d $< > $@
vmlinux.elf vmlinux.bin uImage.srec uImage vmlinux.cso: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
vmlinux.s: vmlinux
$(call if_changed,disasm)
vmlinux.lst: vmlinux
$(call if_changed,listing)
CLEAN_FILES += vmlinux.s vmlinux.lst
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
define archhelp
@echo '* vmlinux.elf - ELF image with load address 0'
@echo ' vmlinux.cso - PathFinder CSO image'
@echo '* uImage - Create a bootable image for U-Boot'
endef