kernel-ark/drivers/cpuidle/governors/menu.c
Daniel Lezcano 8aef33a7cf cpuidle: remove the power_specified field in the driver
We realized that the power usage field is never filled and when it
is filled for tegra, the power_specified flag is not set causing all
of these values to be reset when the driver is initialized with
set_power_state().

However, the power_specified flag can be simply removed under the
assumption that the states are always backward sorted, which is the
case with the current code.

This change allows the menu governor select function and the
cpuidle_play_dead() to be simplified.  Moreover, the
set_power_states() function can removed as it does not make sense
any more.

Drop the power_specified flag from struct cpuidle_driver and make
the related changes as described above.

As a consequence, this also fixes the bug where on the dynamic
C-states system, the power fields are not initialized.

[rjw: Changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=42870
References: https://bugzilla.kernel.org/show_bug.cgi?id=43349
References: https://lkml.org/lkml/2012/10/16/518
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-15 14:18:04 +01:00

554 lines
16 KiB
C

/*
* menu.c - the menu idle governor
*
* Copyright (C) 2006-2007 Adam Belay <abelay@novell.com>
* Copyright (C) 2009 Intel Corporation
* Author:
* Arjan van de Ven <arjan@linux.intel.com>
*
* This code is licenced under the GPL version 2 as described
* in the COPYING file that acompanies the Linux Kernel.
*/
#include <linux/kernel.h>
#include <linux/cpuidle.h>
#include <linux/pm_qos.h>
#include <linux/time.h>
#include <linux/ktime.h>
#include <linux/hrtimer.h>
#include <linux/tick.h>
#include <linux/sched.h>
#include <linux/math64.h>
#include <linux/module.h>
#define BUCKETS 12
#define INTERVALS 8
#define RESOLUTION 1024
#define DECAY 8
#define MAX_INTERESTING 50000
#define STDDEV_THRESH 400
/* 60 * 60 > STDDEV_THRESH * INTERVALS = 400 * 8 */
#define MAX_DEVIATION 60
static DEFINE_PER_CPU(struct hrtimer, menu_hrtimer);
static DEFINE_PER_CPU(int, hrtimer_status);
/* menu hrtimer mode */
enum {MENU_HRTIMER_STOP, MENU_HRTIMER_REPEAT, MENU_HRTIMER_GENERAL};
/*
* Concepts and ideas behind the menu governor
*
* For the menu governor, there are 3 decision factors for picking a C
* state:
* 1) Energy break even point
* 2) Performance impact
* 3) Latency tolerance (from pmqos infrastructure)
* These these three factors are treated independently.
*
* Energy break even point
* -----------------------
* C state entry and exit have an energy cost, and a certain amount of time in
* the C state is required to actually break even on this cost. CPUIDLE
* provides us this duration in the "target_residency" field. So all that we
* need is a good prediction of how long we'll be idle. Like the traditional
* menu governor, we start with the actual known "next timer event" time.
*
* Since there are other source of wakeups (interrupts for example) than
* the next timer event, this estimation is rather optimistic. To get a
* more realistic estimate, a correction factor is applied to the estimate,
* that is based on historic behavior. For example, if in the past the actual
* duration always was 50% of the next timer tick, the correction factor will
* be 0.5.
*
* menu uses a running average for this correction factor, however it uses a
* set of factors, not just a single factor. This stems from the realization
* that the ratio is dependent on the order of magnitude of the expected
* duration; if we expect 500 milliseconds of idle time the likelihood of
* getting an interrupt very early is much higher than if we expect 50 micro
* seconds of idle time. A second independent factor that has big impact on
* the actual factor is if there is (disk) IO outstanding or not.
* (as a special twist, we consider every sleep longer than 50 milliseconds
* as perfect; there are no power gains for sleeping longer than this)
*
* For these two reasons we keep an array of 12 independent factors, that gets
* indexed based on the magnitude of the expected duration as well as the
* "is IO outstanding" property.
*
* Repeatable-interval-detector
* ----------------------------
* There are some cases where "next timer" is a completely unusable predictor:
* Those cases where the interval is fixed, for example due to hardware
* interrupt mitigation, but also due to fixed transfer rate devices such as
* mice.
* For this, we use a different predictor: We track the duration of the last 8
* intervals and if the stand deviation of these 8 intervals is below a
* threshold value, we use the average of these intervals as prediction.
*
* Limiting Performance Impact
* ---------------------------
* C states, especially those with large exit latencies, can have a real
* noticeable impact on workloads, which is not acceptable for most sysadmins,
* and in addition, less performance has a power price of its own.
*
* As a general rule of thumb, menu assumes that the following heuristic
* holds:
* The busier the system, the less impact of C states is acceptable
*
* This rule-of-thumb is implemented using a performance-multiplier:
* If the exit latency times the performance multiplier is longer than
* the predicted duration, the C state is not considered a candidate
* for selection due to a too high performance impact. So the higher
* this multiplier is, the longer we need to be idle to pick a deep C
* state, and thus the less likely a busy CPU will hit such a deep
* C state.
*
* Two factors are used in determing this multiplier:
* a value of 10 is added for each point of "per cpu load average" we have.
* a value of 5 points is added for each process that is waiting for
* IO on this CPU.
* (these values are experimentally determined)
*
* The load average factor gives a longer term (few seconds) input to the
* decision, while the iowait value gives a cpu local instantanious input.
* The iowait factor may look low, but realize that this is also already
* represented in the system load average.
*
*/
/*
* The C-state residency is so long that is is worthwhile to exit
* from the shallow C-state and re-enter into a deeper C-state.
*/
static unsigned int perfect_cstate_ms __read_mostly = 30;
module_param(perfect_cstate_ms, uint, 0000);
struct menu_device {
int last_state_idx;
int needs_update;
unsigned int expected_us;
u64 predicted_us;
unsigned int exit_us;
unsigned int bucket;
u64 correction_factor[BUCKETS];
u32 intervals[INTERVALS];
int interval_ptr;
};
#define LOAD_INT(x) ((x) >> FSHIFT)
#define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100)
static int get_loadavg(void)
{
unsigned long this = this_cpu_load();
return LOAD_INT(this) * 10 + LOAD_FRAC(this) / 10;
}
static inline int which_bucket(unsigned int duration)
{
int bucket = 0;
/*
* We keep two groups of stats; one with no
* IO pending, one without.
* This allows us to calculate
* E(duration)|iowait
*/
if (nr_iowait_cpu(smp_processor_id()))
bucket = BUCKETS/2;
if (duration < 10)
return bucket;
if (duration < 100)
return bucket + 1;
if (duration < 1000)
return bucket + 2;
if (duration < 10000)
return bucket + 3;
if (duration < 100000)
return bucket + 4;
return bucket + 5;
}
/*
* Return a multiplier for the exit latency that is intended
* to take performance requirements into account.
* The more performance critical we estimate the system
* to be, the higher this multiplier, and thus the higher
* the barrier to go to an expensive C state.
*/
static inline int performance_multiplier(void)
{
int mult = 1;
/* for higher loadavg, we are more reluctant */
mult += 2 * get_loadavg();
/* for IO wait tasks (per cpu!) we add 5x each */
mult += 10 * nr_iowait_cpu(smp_processor_id());
return mult;
}
static DEFINE_PER_CPU(struct menu_device, menu_devices);
static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev);
/* This implements DIV_ROUND_CLOSEST but avoids 64 bit division */
static u64 div_round64(u64 dividend, u32 divisor)
{
return div_u64(dividend + (divisor / 2), divisor);
}
/* Cancel the hrtimer if it is not triggered yet */
void menu_hrtimer_cancel(void)
{
int cpu = smp_processor_id();
struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
/* The timer is still not time out*/
if (per_cpu(hrtimer_status, cpu)) {
hrtimer_cancel(hrtmr);
per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
}
}
EXPORT_SYMBOL_GPL(menu_hrtimer_cancel);
/* Call back for hrtimer is triggered */
static enum hrtimer_restart menu_hrtimer_notify(struct hrtimer *hrtimer)
{
int cpu = smp_processor_id();
struct menu_device *data = &per_cpu(menu_devices, cpu);
/* In general case, the expected residency is much larger than
* deepest C-state target residency, but prediction logic still
* predicts a small predicted residency, so the prediction
* history is totally broken if the timer is triggered.
* So reset the correction factor.
*/
if (per_cpu(hrtimer_status, cpu) == MENU_HRTIMER_GENERAL)
data->correction_factor[data->bucket] = RESOLUTION * DECAY;
per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
return HRTIMER_NORESTART;
}
/*
* Try detecting repeating patterns by keeping track of the last 8
* intervals, and checking if the standard deviation of that set
* of points is below a threshold. If it is... then use the
* average of these 8 points as the estimated value.
*/
static u32 get_typical_interval(struct menu_device *data)
{
int i = 0, divisor = 0;
uint64_t max = 0, avg = 0, stddev = 0;
int64_t thresh = LLONG_MAX; /* Discard outliers above this value. */
unsigned int ret = 0;
again:
/* first calculate average and standard deviation of the past */
max = avg = divisor = stddev = 0;
for (i = 0; i < INTERVALS; i++) {
int64_t value = data->intervals[i];
if (value <= thresh) {
avg += value;
divisor++;
if (value > max)
max = value;
}
}
do_div(avg, divisor);
for (i = 0; i < INTERVALS; i++) {
int64_t value = data->intervals[i];
if (value <= thresh) {
int64_t diff = value - avg;
stddev += diff * diff;
}
}
do_div(stddev, divisor);
stddev = int_sqrt(stddev);
/*
* If we have outliers to the upside in our distribution, discard
* those by setting the threshold to exclude these outliers, then
* calculate the average and standard deviation again. Once we get
* down to the bottom 3/4 of our samples, stop excluding samples.
*
* This can deal with workloads that have long pauses interspersed
* with sporadic activity with a bunch of short pauses.
*
* The typical interval is obtained when standard deviation is small
* or standard deviation is small compared to the average interval.
*/
if (((avg > stddev * 6) && (divisor * 4 >= INTERVALS * 3))
|| stddev <= 20) {
data->predicted_us = avg;
ret = 1;
return ret;
} else if ((divisor * 4) > INTERVALS * 3) {
/* Exclude the max interval */
thresh = max - 1;
goto again;
}
return ret;
}
/**
* menu_select - selects the next idle state to enter
* @drv: cpuidle driver containing state data
* @dev: the CPU
*/
static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY);
int i;
int multiplier;
struct timespec t;
int repeat = 0, low_predicted = 0;
int cpu = smp_processor_id();
struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
if (data->needs_update) {
menu_update(drv, dev);
data->needs_update = 0;
}
data->last_state_idx = 0;
data->exit_us = 0;
/* Special case when user has set very strict latency requirement */
if (unlikely(latency_req == 0))
return 0;
/* determine the expected residency time, round up */
t = ktime_to_timespec(tick_nohz_get_sleep_length());
data->expected_us =
t.tv_sec * USEC_PER_SEC + t.tv_nsec / NSEC_PER_USEC;
data->bucket = which_bucket(data->expected_us);
multiplier = performance_multiplier();
/*
* if the correction factor is 0 (eg first time init or cpu hotplug
* etc), we actually want to start out with a unity factor.
*/
if (data->correction_factor[data->bucket] == 0)
data->correction_factor[data->bucket] = RESOLUTION * DECAY;
/* Make sure to round up for half microseconds */
data->predicted_us = div_round64(data->expected_us * data->correction_factor[data->bucket],
RESOLUTION * DECAY);
repeat = get_typical_interval(data);
/*
* We want to default to C1 (hlt), not to busy polling
* unless the timer is happening really really soon.
*/
if (data->expected_us > 5 &&
!drv->states[CPUIDLE_DRIVER_STATE_START].disabled &&
dev->states_usage[CPUIDLE_DRIVER_STATE_START].disable == 0)
data->last_state_idx = CPUIDLE_DRIVER_STATE_START;
/*
* Find the idle state with the lowest power while satisfying
* our constraints.
*/
for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) {
struct cpuidle_state *s = &drv->states[i];
struct cpuidle_state_usage *su = &dev->states_usage[i];
if (s->disabled || su->disable)
continue;
if (s->target_residency > data->predicted_us) {
low_predicted = 1;
continue;
}
if (s->exit_latency > latency_req)
continue;
if (s->exit_latency * multiplier > data->predicted_us)
continue;
data->last_state_idx = i;
data->exit_us = s->exit_latency;
}
/* not deepest C-state chosen for low predicted residency */
if (low_predicted) {
unsigned int timer_us = 0;
unsigned int perfect_us = 0;
/*
* Set a timer to detect whether this sleep is much
* longer than repeat mode predicted. If the timer
* triggers, the code will evaluate whether to put
* the CPU into a deeper C-state.
* The timer is cancelled on CPU wakeup.
*/
timer_us = 2 * (data->predicted_us + MAX_DEVIATION);
perfect_us = perfect_cstate_ms * 1000;
if (repeat && (4 * timer_us < data->expected_us)) {
RCU_NONIDLE(hrtimer_start(hrtmr,
ns_to_ktime(1000 * timer_us),
HRTIMER_MODE_REL_PINNED));
/* In repeat case, menu hrtimer is started */
per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_REPEAT;
} else if (perfect_us < data->expected_us) {
/*
* The next timer is long. This could be because
* we did not make a useful prediction.
* In that case, it makes sense to re-enter
* into a deeper C-state after some time.
*/
RCU_NONIDLE(hrtimer_start(hrtmr,
ns_to_ktime(1000 * timer_us),
HRTIMER_MODE_REL_PINNED));
/* In general case, menu hrtimer is started */
per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_GENERAL;
}
}
return data->last_state_idx;
}
/**
* menu_reflect - records that data structures need update
* @dev: the CPU
* @index: the index of actual entered state
*
* NOTE: it's important to be fast here because this operation will add to
* the overall exit latency.
*/
static void menu_reflect(struct cpuidle_device *dev, int index)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
data->last_state_idx = index;
if (index >= 0)
data->needs_update = 1;
}
/**
* menu_update - attempts to guess what happened after entry
* @drv: cpuidle driver containing state data
* @dev: the CPU
*/
static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
int last_idx = data->last_state_idx;
unsigned int last_idle_us = cpuidle_get_last_residency(dev);
struct cpuidle_state *target = &drv->states[last_idx];
unsigned int measured_us;
u64 new_factor;
/*
* Ugh, this idle state doesn't support residency measurements, so we
* are basically lost in the dark. As a compromise, assume we slept
* for the whole expected time.
*/
if (unlikely(!(target->flags & CPUIDLE_FLAG_TIME_VALID)))
last_idle_us = data->expected_us;
measured_us = last_idle_us;
/*
* We correct for the exit latency; we are assuming here that the
* exit latency happens after the event that we're interested in.
*/
if (measured_us > data->exit_us)
measured_us -= data->exit_us;
/* update our correction ratio */
new_factor = data->correction_factor[data->bucket]
* (DECAY - 1) / DECAY;
if (data->expected_us > 0 && measured_us < MAX_INTERESTING)
new_factor += RESOLUTION * measured_us / data->expected_us;
else
/*
* we were idle so long that we count it as a perfect
* prediction
*/
new_factor += RESOLUTION;
/*
* We don't want 0 as factor; we always want at least
* a tiny bit of estimated time.
*/
if (new_factor == 0)
new_factor = 1;
data->correction_factor[data->bucket] = new_factor;
/* update the repeating-pattern data */
data->intervals[data->interval_ptr++] = last_idle_us;
if (data->interval_ptr >= INTERVALS)
data->interval_ptr = 0;
}
/**
* menu_enable_device - scans a CPU's states and does setup
* @drv: cpuidle driver
* @dev: the CPU
*/
static int menu_enable_device(struct cpuidle_driver *drv,
struct cpuidle_device *dev)
{
struct menu_device *data = &per_cpu(menu_devices, dev->cpu);
struct hrtimer *t = &per_cpu(menu_hrtimer, dev->cpu);
hrtimer_init(t, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
t->function = menu_hrtimer_notify;
memset(data, 0, sizeof(struct menu_device));
return 0;
}
static struct cpuidle_governor menu_governor = {
.name = "menu",
.rating = 20,
.enable = menu_enable_device,
.select = menu_select,
.reflect = menu_reflect,
.owner = THIS_MODULE,
};
/**
* init_menu - initializes the governor
*/
static int __init init_menu(void)
{
return cpuidle_register_governor(&menu_governor);
}
/**
* exit_menu - exits the governor
*/
static void __exit exit_menu(void)
{
cpuidle_unregister_governor(&menu_governor);
}
MODULE_LICENSE("GPL");
module_init(init_menu);
module_exit(exit_menu);