kernel-ark/drivers/clk/tegra/clk.h
Paul Walmsley 1c472d8e82 clk: tegra: T114: add DFLL DVCO reset control
Add DFLL DVCO reset line control functions to the CAR IP block driver.

The DVCO present in the DFLL IP block has a separate reset line,
exposed via the CAR IP block.  This reset line is asserted upon SoC
reset.  Unless something (such as the DFLL driver) deasserts this
line, the DVCO will not oscillate, although reads and writes to the
DFLL IP block will complete.

Thanks to Aleksandr Frid <afrid@nvidia.com> for identifying this and
saving hours of debugging time.

Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Aleksandr Frid <afrid@nvidia.com>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-18 11:28:51 -07:00

600 lines
18 KiB
C

/*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __TEGRA_CLK_H
#define __TEGRA_CLK_H
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
/**
* struct tegra_clk_sync_source - external clock source from codec
*
* @hw: handle between common and hardware-specific interfaces
* @rate: input frequency from source
* @max_rate: max rate allowed
*/
struct tegra_clk_sync_source {
struct clk_hw hw;
unsigned long rate;
unsigned long max_rate;
};
#define to_clk_sync_source(_hw) \
container_of(_hw, struct tegra_clk_sync_source, hw)
extern const struct clk_ops tegra_clk_sync_source_ops;
struct clk *tegra_clk_register_sync_source(const char *name,
unsigned long fixed_rate, unsigned long max_rate);
/**
* struct tegra_clk_frac_div - fractional divider clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register containing divider
* @flags: hardware-specific flags
* @shift: shift to the divider bit field
* @width: width of the divider bit field
* @frac_width: width of the fractional bit field
* @lock: register lock
*
* Flags:
* TEGRA_DIVIDER_ROUND_UP - This flags indicates to round up the divider value.
* TEGRA_DIVIDER_FIXED - Fixed rate PLL dividers has addition override bit, this
* flag indicates that this divider is for fixed rate PLL.
* TEGRA_DIVIDER_INT - Some modules can not cope with the duty cycle when
* fraction bit is set. This flags indicates to calculate divider for which
* fracton bit will be zero.
* TEGRA_DIVIDER_UART - UART module divider has additional enable bit which is
* set when divider value is not 0. This flags indicates that the divider
* is for UART module.
*/
struct tegra_clk_frac_div {
struct clk_hw hw;
void __iomem *reg;
u8 flags;
u8 shift;
u8 width;
u8 frac_width;
spinlock_t *lock;
};
#define to_clk_frac_div(_hw) container_of(_hw, struct tegra_clk_frac_div, hw)
#define TEGRA_DIVIDER_ROUND_UP BIT(0)
#define TEGRA_DIVIDER_FIXED BIT(1)
#define TEGRA_DIVIDER_INT BIT(2)
#define TEGRA_DIVIDER_UART BIT(3)
extern const struct clk_ops tegra_clk_frac_div_ops;
struct clk *tegra_clk_register_divider(const char *name,
const char *parent_name, void __iomem *reg,
unsigned long flags, u8 clk_divider_flags, u8 shift, u8 width,
u8 frac_width, spinlock_t *lock);
/*
* Tegra PLL:
*
* In general, there are 3 requirements for each PLL
* that SW needs to be comply with.
* (1) Input frequency range (REF).
* (2) Comparison frequency range (CF). CF = REF/DIVM.
* (3) VCO frequency range (VCO). VCO = CF * DIVN.
*
* The final PLL output frequency (FO) = VCO >> DIVP.
*/
/**
* struct tegra_clk_pll_freq_table - PLL frequecy table
*
* @input_rate: input rate from source
* @output_rate: output rate from PLL for the input rate
* @n: feedback divider
* @m: input divider
* @p: post divider
* @cpcon: charge pump current
*/
struct tegra_clk_pll_freq_table {
unsigned long input_rate;
unsigned long output_rate;
u16 n;
u16 m;
u8 p;
u8 cpcon;
};
/**
* struct pdiv_map - map post divider to hw value
*
* @pdiv: post divider
* @hw_val: value to be written to the PLL hw
*/
struct pdiv_map {
u8 pdiv;
u8 hw_val;
};
/**
* struct div_nmp - offset and width of m,n and p fields
*
* @divn_shift: shift to the feedback divider bit field
* @divn_width: width of the feedback divider bit field
* @divm_shift: shift to the input divider bit field
* @divm_width: width of the input divider bit field
* @divp_shift: shift to the post divider bit field
* @divp_width: width of the post divider bit field
* @override_divn_shift: shift to the feedback divider bitfield in override reg
* @override_divm_shift: shift to the input divider bitfield in override reg
* @override_divp_shift: shift to the post divider bitfield in override reg
*/
struct div_nmp {
u8 divn_shift;
u8 divn_width;
u8 divm_shift;
u8 divm_width;
u8 divp_shift;
u8 divp_width;
u8 override_divn_shift;
u8 override_divm_shift;
u8 override_divp_shift;
};
/**
* struct clk_pll_params - PLL parameters
*
* @input_min: Minimum input frequency
* @input_max: Maximum input frequency
* @cf_min: Minimum comparison frequency
* @cf_max: Maximum comparison frequency
* @vco_min: Minimum VCO frequency
* @vco_max: Maximum VCO frequency
* @base_reg: PLL base reg offset
* @misc_reg: PLL misc reg offset
* @lock_reg: PLL lock reg offset
* @lock_bit_idx: Bit index for PLL lock status
* @lock_enable_bit_idx: Bit index to enable PLL lock
* @lock_delay: Delay in us if PLL lock is not used
*/
struct tegra_clk_pll_params {
unsigned long input_min;
unsigned long input_max;
unsigned long cf_min;
unsigned long cf_max;
unsigned long vco_min;
unsigned long vco_max;
u32 base_reg;
u32 misc_reg;
u32 lock_reg;
u32 lock_mask;
u32 lock_enable_bit_idx;
u32 iddq_reg;
u32 iddq_bit_idx;
u32 aux_reg;
u32 dyn_ramp_reg;
u32 ext_misc_reg[3];
u32 pmc_divnm_reg;
u32 pmc_divp_reg;
int stepa_shift;
int stepb_shift;
int lock_delay;
int max_p;
struct pdiv_map *pdiv_tohw;
struct div_nmp *div_nmp;
};
/**
* struct tegra_clk_pll - Tegra PLL clock
*
* @hw: handle between common and hardware-specifix interfaces
* @clk_base: address of CAR controller
* @pmc: address of PMC, required to read override bits
* @freq_table: array of frequencies supported by PLL
* @params: PLL parameters
* @flags: PLL flags
* @fixed_rate: PLL rate if it is fixed
* @lock: register lock
*
* Flags:
* TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
* PLL locking. If not set it will use lock_delay value to wait.
* TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
* to be programmed to change output frequency of the PLL.
* TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
* to be programmed to change output frequency of the PLL.
* TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
* to be programmed to change output frequency of the PLL.
* TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
* that it is PLLU and invert post divider value.
* TEGRA_PLLM - PLLM has additional override settings in PMC. This
* flag indicates that it is PLLM and use override settings.
* TEGRA_PLL_FIXED - We are not supposed to change output frequency
* of some plls.
* TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
* TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
* base register.
* TEGRA_PLL_BYPASS - PLL has bypass bit
* TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
*/
struct tegra_clk_pll {
struct clk_hw hw;
void __iomem *clk_base;
void __iomem *pmc;
u32 flags;
unsigned long fixed_rate;
spinlock_t *lock;
struct tegra_clk_pll_freq_table *freq_table;
struct tegra_clk_pll_params *params;
};
#define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw)
#define TEGRA_PLL_USE_LOCK BIT(0)
#define TEGRA_PLL_HAS_CPCON BIT(1)
#define TEGRA_PLL_SET_LFCON BIT(2)
#define TEGRA_PLL_SET_DCCON BIT(3)
#define TEGRA_PLLU BIT(4)
#define TEGRA_PLLM BIT(5)
#define TEGRA_PLL_FIXED BIT(6)
#define TEGRA_PLLE_CONFIGURE BIT(7)
#define TEGRA_PLL_LOCK_MISC BIT(8)
#define TEGRA_PLL_BYPASS BIT(9)
#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
extern const struct clk_ops tegra_clk_pll_ops;
extern const struct clk_ops tegra_clk_plle_ops;
struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params,
u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock);
struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params,
u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock);
struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params,
u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock);
struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params,
u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock, unsigned long parent_rate);
struct clk *tegra_clk_register_plle_tegra114(const char *name,
const char *parent_name,
void __iomem *clk_base, unsigned long flags,
unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params,
struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock);
/**
* struct tegra_clk_pll_out - PLL divider down clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register containing the PLL divider
* @enb_bit_idx: bit to enable/disable PLL divider
* @rst_bit_idx: bit to reset PLL divider
* @lock: register lock
* @flags: hardware-specific flags
*/
struct tegra_clk_pll_out {
struct clk_hw hw;
void __iomem *reg;
u8 enb_bit_idx;
u8 rst_bit_idx;
spinlock_t *lock;
u8 flags;
};
#define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw)
extern const struct clk_ops tegra_clk_pll_out_ops;
struct clk *tegra_clk_register_pll_out(const char *name,
const char *parent_name, void __iomem *reg, u8 enb_bit_idx,
u8 rst_bit_idx, unsigned long flags, u8 pll_div_flags,
spinlock_t *lock);
/**
* struct tegra_clk_periph_regs - Registers controlling peripheral clock
*
* @enb_reg: read the enable status
* @enb_set_reg: write 1 to enable clock
* @enb_clr_reg: write 1 to disable clock
* @rst_reg: read the reset status
* @rst_set_reg: write 1 to assert the reset of peripheral
* @rst_clr_reg: write 1 to deassert the reset of peripheral
*/
struct tegra_clk_periph_regs {
u32 enb_reg;
u32 enb_set_reg;
u32 enb_clr_reg;
u32 rst_reg;
u32 rst_set_reg;
u32 rst_clr_reg;
};
/**
* struct tegra_clk_periph_gate - peripheral gate clock
*
* @magic: magic number to validate type
* @hw: handle between common and hardware-specific interfaces
* @clk_base: address of CAR controller
* @regs: Registers to control the peripheral
* @flags: hardware-specific flags
* @clk_num: Clock number
* @enable_refcnt: array to maintain reference count of the clock
*
* Flags:
* TEGRA_PERIPH_NO_RESET - This flag indicates that reset is not allowed
* for this module.
* TEGRA_PERIPH_MANUAL_RESET - This flag indicates not to reset module
* after clock enable and driver for the module is responsible for
* doing reset.
* TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the
* bus to flush the write operation in apb bus. This flag indicates
* that this peripheral is in apb bus.
* TEGRA_PERIPH_WAR_1005168 - Apply workaround for Tegra114 MSENC bug
*/
struct tegra_clk_periph_gate {
u32 magic;
struct clk_hw hw;
void __iomem *clk_base;
u8 flags;
int clk_num;
int *enable_refcnt;
struct tegra_clk_periph_regs *regs;
};
#define to_clk_periph_gate(_hw) \
container_of(_hw, struct tegra_clk_periph_gate, hw)
#define TEGRA_CLK_PERIPH_GATE_MAGIC 0x17760309
#define TEGRA_PERIPH_NO_RESET BIT(0)
#define TEGRA_PERIPH_MANUAL_RESET BIT(1)
#define TEGRA_PERIPH_ON_APB BIT(2)
#define TEGRA_PERIPH_WAR_1005168 BIT(3)
void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert);
extern const struct clk_ops tegra_clk_periph_gate_ops;
struct clk *tegra_clk_register_periph_gate(const char *name,
const char *parent_name, u8 gate_flags, void __iomem *clk_base,
unsigned long flags, int clk_num,
struct tegra_clk_periph_regs *pregs, int *enable_refcnt);
/**
* struct clk-periph - peripheral clock
*
* @magic: magic number to validate type
* @hw: handle between common and hardware-specific interfaces
* @mux: mux clock
* @divider: divider clock
* @gate: gate clock
* @mux_ops: mux clock ops
* @div_ops: divider clock ops
* @gate_ops: gate clock ops
*/
struct tegra_clk_periph {
u32 magic;
struct clk_hw hw;
struct clk_mux mux;
struct tegra_clk_frac_div divider;
struct tegra_clk_periph_gate gate;
const struct clk_ops *mux_ops;
const struct clk_ops *div_ops;
const struct clk_ops *gate_ops;
};
#define to_clk_periph(_hw) container_of(_hw, struct tegra_clk_periph, hw)
#define TEGRA_CLK_PERIPH_MAGIC 0x18221223
extern const struct clk_ops tegra_clk_periph_ops;
struct clk *tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
u32 offset, unsigned long flags);
struct clk *tegra_clk_register_periph_nodiv(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
u32 offset);
#define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags, \
_div_shift, _div_width, _div_frac_width, \
_div_flags, _clk_num, _enb_refcnt, _regs, \
_gate_flags, _table) \
{ \
.mux = { \
.flags = _mux_flags, \
.shift = _mux_shift, \
.mask = _mux_mask, \
.table = _table, \
}, \
.divider = { \
.flags = _div_flags, \
.shift = _div_shift, \
.width = _div_width, \
.frac_width = _div_frac_width, \
}, \
.gate = { \
.flags = _gate_flags, \
.clk_num = _clk_num, \
.enable_refcnt = _enb_refcnt, \
.regs = _regs, \
}, \
.mux_ops = &clk_mux_ops, \
.div_ops = &tegra_clk_frac_div_ops, \
.gate_ops = &tegra_clk_periph_gate_ops, \
}
struct tegra_periph_init_data {
const char *name;
int clk_id;
const char **parent_names;
int num_parents;
struct tegra_clk_periph periph;
u32 offset;
const char *con_id;
const char *dev_id;
unsigned long flags;
};
#define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
_mux_shift, _mux_mask, _mux_flags, _div_shift, \
_div_width, _div_frac_width, _div_flags, _regs, \
_clk_num, _enb_refcnt, _gate_flags, _clk_id, _table,\
_flags) \
{ \
.name = _name, \
.clk_id = _clk_id, \
.parent_names = _parent_names, \
.num_parents = ARRAY_SIZE(_parent_names), \
.periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, \
_mux_flags, _div_shift, \
_div_width, _div_frac_width, \
_div_flags, _clk_num, \
_enb_refcnt, _regs, \
_gate_flags, _table), \
.offset = _offset, \
.con_id = _con_id, \
.dev_id = _dev_id, \
.flags = _flags \
}
#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\
_mux_shift, _mux_width, _mux_flags, _div_shift, \
_div_width, _div_frac_width, _div_flags, _regs, \
_clk_num, _enb_refcnt, _gate_flags, _clk_id) \
TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
_mux_shift, BIT(_mux_width) - 1, _mux_flags, \
_div_shift, _div_width, _div_frac_width, _div_flags, \
_regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\
NULL, 0)
/**
* struct clk_super_mux - super clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register controlling multiplexer
* @width: width of the multiplexer bit field
* @flags: hardware-specific flags
* @div2_index: bit controlling divide-by-2
* @pllx_index: PLLX index in the parent list
* @lock: register lock
*
* Flags:
* TEGRA_DIVIDER_2 - LP cluster has additional divider. This flag indicates
* that this is LP cluster clock.
*/
struct tegra_clk_super_mux {
struct clk_hw hw;
void __iomem *reg;
u8 width;
u8 flags;
u8 div2_index;
u8 pllx_index;
spinlock_t *lock;
};
#define to_clk_super_mux(_hw) container_of(_hw, struct tegra_clk_super_mux, hw)
#define TEGRA_DIVIDER_2 BIT(0)
extern const struct clk_ops tegra_clk_super_ops;
struct clk *tegra_clk_register_super_mux(const char *name,
const char **parent_names, u8 num_parents,
unsigned long flags, void __iomem *reg, u8 clk_super_flags,
u8 width, u8 pllx_index, u8 div2_index, spinlock_t *lock);
/**
* struct clk_init_tabel - clock initialization table
* @clk_id: clock id as mentioned in device tree bindings
* @parent_id: parent clock id as mentioned in device tree bindings
* @rate: rate to set
* @state: enable/disable
*/
struct tegra_clk_init_table {
unsigned int clk_id;
unsigned int parent_id;
unsigned long rate;
int state;
};
/**
* struct clk_duplicate - duplicate clocks
* @clk_id: clock id as mentioned in device tree bindings
* @lookup: duplicate lookup entry for the clock
*/
struct tegra_clk_duplicate {
int clk_id;
struct clk_lookup lookup;
};
#define TEGRA_CLK_DUPLICATE(_clk_id, _dev, _con) \
{ \
.clk_id = _clk_id, \
.lookup = { \
.dev_id = _dev, \
.con_id = _con, \
}, \
}
void tegra_init_from_table(struct tegra_clk_init_table *tbl,
struct clk *clks[], int clk_max);
void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
struct clk *clks[], int clk_max);
void tegra114_clock_tune_cpu_trimmers_high(void);
void tegra114_clock_tune_cpu_trimmers_low(void);
void tegra114_clock_tune_cpu_trimmers_init(void);
void tegra114_clock_assert_dfll_dvco_reset(void);
void tegra114_clock_deassert_dfll_dvco_reset(void);
typedef void (*tegra_clk_apply_init_table_func)(void);
extern tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
#endif /* TEGRA_CLK_H */