kernel-ark/Documentation/hwmon/hih6130
Iain Paton 27f8b13555 hwmon: Honeywell Humidicon HIH-6130/HIH-6131 humidity and temperature sensor driver
This is a new driver for the Honeywell Humidicon HIH-6130/HIH-6131 humidity sensor.

The driver is based on the existing Sensiron sht21 driver with the necessary changes
to the probe, update_measurements and conversion functions necessary to use the
Honeywell sensors.

There's no difference between the 6130 & 6131 other than the 6131 having an external
condensation filter attached.

Signed-off-by: Iain Paton <ipaton0@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:44 -07:00

38 lines
973 B
Plaintext

Kernel driver hih6130
=====================
Supported chips:
* Honeywell HIH-6130 / HIH-6131
Prefix: 'hih6130'
Addresses scanned: none
Datasheet: Publicly available at the Honeywell website
http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872
Author:
Iain Paton <ipaton0@gmail.com>
Description
-----------
The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package.
The difference between the two devices is that the HIH-6131 has a condensation
filter.
The devices communicate with the I2C protocol. All sensors are set to the same
I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27)
can be used in the board setup code.
Please see Documentation/i2c/instantiating-devices for details on how to
instantiate I2C devices.
sysfs-Interface
---------------
temp1_input - temperature input
humidity1_input - humidity input
Notes
-----
Command mode and alarms are not currently supported.