kernel-ark/arch/powerpc/platforms/cell/interrupt.c
Benjamin Herrenschmidt 6e99e45828 [PATCH] powerpc: fix trigger handling in the new irq code
This patch slightly reworks the new irq code to fix a small design error.  I
removed the passing of the trigger to the map() calls entirely, it was not a
good idea to have one call do two different things.  It also fixes a couple of
corner cases.

Mapping a linux virtual irq to a physical irq now does only that.  Setting the
trigger is a different action which has a different call.

The main changes are:

- I no longer call host->ops->map() for an already mapped irq, I just return
  the virtual number that was already mapped.  It was called before to give an
  opportunity to change the trigger, but that was causing issues as that could
  happen while the interrupt was in use by a device, and because of the
  trigger change, map would potentially muck around with things in a racy way.
   That was causing much burden on a given's controller implementation of
  map() to get it right.  This is much simpler now.  map() is only called on
  the initial mapping of an irq, meaning that you know that this irq is _not_
  being used.  You can initialize the hardware if you want (though you don't
  have to).

- Controllers that can handle different type of triggers (level/edge/etc...)
  now implement the standard irq_chip->set_type() call as defined by the
  generic code.  That means that you can use the standard set_irq_type() to
  configure an irq line manually if you wish or (though I don't like that
  interface), pass explicit trigger flags to request_irq() as defined by the
  generic kernel interfaces.  Also, using those interfaces guarantees that
  your controller set_type callback is called with the descriptor lock held,
  thus providing locking against activity on the same interrupt (including
  mask/unmask/etc...) automatically.  A result is that, for example, MPIC's
  own map() implementation calls irq_set_type(NONE) to configure the hardware
  to the default triggers.

- To allow the above, the irq_map array entry for the new mapped interrupt
  is now set before map() callback is called for the controller.

- The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function
  for mapping interrupts from the device-tree now also call the separate
  set_irq_type(), and only does so if there is a change in the trigger type.

- While I was at it, I changed pci_read_irq_line() (which is the helper I
  would expect most archs to use in their pcibios_fixup() to get the PCI
  interrupt routing from the device tree) to also handle a fallback when the
  DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether
  the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an
  interrupt number from the device.  That number is then mapped using the
  default controller, and the trigger is set to level low.  That default
  behaviour works for several platforms that don't have a proper interrupt
  tree like Pegasos.  If it doesn't work for your platform, then either
  provide a proper interrupt tree from the firmware so that fallback isn't
  needed, or don't call pci_read_irq_line()

- Add back a bit that got dropped by my main rework patch for properly
  clearing pending IPIs on pSeries when using a kexec

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:20 -07:00

306 lines
7.4 KiB
C

/*
* Cell Internal Interrupt Controller
*
* Copyright (C) 2006 Benjamin Herrenschmidt (benh@kernel.crashing.org)
* IBM, Corp.
*
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005
*
* Author: Arnd Bergmann <arndb@de.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/types.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/ptrace.h>
#include <asm/machdep.h>
#include "interrupt.h"
#include "cbe_regs.h"
struct iic {
struct cbe_iic_thread_regs __iomem *regs;
u8 target_id;
u8 eoi_stack[16];
int eoi_ptr;
struct irq_host *host;
};
static DEFINE_PER_CPU(struct iic, iic);
#define IIC_NODE_COUNT 2
static struct irq_host *iic_hosts[IIC_NODE_COUNT];
/* Convert between "pending" bits and hw irq number */
static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits)
{
unsigned char unit = bits.source & 0xf;
if (bits.flags & CBE_IIC_IRQ_IPI)
return IIC_IRQ_IPI0 | (bits.prio >> 4);
else if (bits.class <= 3)
return (bits.class << 4) | unit;
else
return IIC_IRQ_INVALID;
}
static void iic_mask(unsigned int irq)
{
}
static void iic_unmask(unsigned int irq)
{
}
static void iic_eoi(unsigned int irq)
{
struct iic *iic = &__get_cpu_var(iic);
out_be64(&iic->regs->prio, iic->eoi_stack[--iic->eoi_ptr]);
BUG_ON(iic->eoi_ptr < 0);
}
static struct irq_chip iic_chip = {
.typename = " CELL-IIC ",
.mask = iic_mask,
.unmask = iic_unmask,
.eoi = iic_eoi,
};
/* Get an IRQ number from the pending state register of the IIC */
static unsigned int iic_get_irq(struct pt_regs *regs)
{
struct cbe_iic_pending_bits pending;
struct iic *iic;
iic = &__get_cpu_var(iic);
*(unsigned long *) &pending =
in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
iic->eoi_stack[++iic->eoi_ptr] = pending.prio;
BUG_ON(iic->eoi_ptr > 15);
if (pending.flags & CBE_IIC_IRQ_VALID)
return irq_linear_revmap(iic->host,
iic_pending_to_hwnum(pending));
return NO_IRQ;
}
#ifdef CONFIG_SMP
/* Use the highest interrupt priorities for IPI */
static inline int iic_ipi_to_irq(int ipi)
{
return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi;
}
static inline int iic_irq_to_ipi(int irq)
{
return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0);
}
void iic_setup_cpu(void)
{
out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
}
void iic_cause_IPI(int cpu, int mesg)
{
out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4);
}
u8 iic_get_target_id(int cpu)
{
return per_cpu(iic, cpu).target_id;
}
EXPORT_SYMBOL_GPL(iic_get_target_id);
struct irq_host *iic_get_irq_host(int node)
{
if (node < 0 || node >= IIC_NODE_COUNT)
return NULL;
return iic_hosts[node];
}
EXPORT_SYMBOL_GPL(iic_get_irq_host);
static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
{
int ipi = (int)(long)dev_id;
smp_message_recv(ipi, regs);
return IRQ_HANDLED;
}
static void iic_request_ipi(int ipi, const char *name)
{
int node, virq;
for (node = 0; node < IIC_NODE_COUNT; node++) {
char *rname;
if (iic_hosts[node] == NULL)
continue;
virq = irq_create_mapping(iic_hosts[node],
iic_ipi_to_irq(ipi));
if (virq == NO_IRQ) {
printk(KERN_ERR
"iic: failed to map IPI %s on node %d\n",
name, node);
continue;
}
rname = kzalloc(strlen(name) + 16, GFP_KERNEL);
if (rname)
sprintf(rname, "%s node %d", name, node);
else
rname = (char *)name;
if (request_irq(virq, iic_ipi_action, IRQF_DISABLED,
rname, (void *)(long)ipi))
printk(KERN_ERR
"iic: failed to request IPI %s on node %d\n",
name, node);
}
}
void iic_request_IPIs(void)
{
iic_request_ipi(PPC_MSG_CALL_FUNCTION, "IPI-call");
iic_request_ipi(PPC_MSG_RESCHEDULE, "IPI-resched");
#ifdef CONFIG_DEBUGGER
iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug");
#endif /* CONFIG_DEBUGGER */
}
#endif /* CONFIG_SMP */
static int iic_host_match(struct irq_host *h, struct device_node *node)
{
return h->host_data != NULL && node == h->host_data;
}
static int iic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
if (hw < IIC_IRQ_IPI0)
set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
else
set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq);
return 0;
}
static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
/* Currently, we don't translate anything. That needs to be fixed as
* we get better defined device-trees. iic interrupts have to be
* explicitely mapped by whoever needs them
*/
return -ENODEV;
}
static struct irq_host_ops iic_host_ops = {
.match = iic_host_match,
.map = iic_host_map,
.xlate = iic_host_xlate,
};
static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
struct irq_host *host)
{
/* XXX FIXME: should locate the linux CPU number from the HW cpu
* number properly. We are lucky for now
*/
struct iic *iic = &per_cpu(iic, hw_cpu);
iic->regs = ioremap(addr, sizeof(struct cbe_iic_thread_regs));
BUG_ON(iic->regs == NULL);
iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe);
iic->eoi_stack[0] = 0xff;
iic->host = host;
out_be64(&iic->regs->prio, 0);
printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n",
hw_cpu, addr, iic->regs, iic->target_id);
}
static int __init setup_iic(void)
{
struct device_node *dn;
struct resource r0, r1;
struct irq_host *host;
int found = 0;
u32 *np;
for (dn = NULL;
(dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) {
if (!device_is_compatible(dn,
"IBM,CBEA-Internal-Interrupt-Controller"))
continue;
np = (u32 *)get_property(dn, "ibm,interrupt-server-ranges",
NULL);
if (np == NULL) {
printk(KERN_WARNING "IIC: CPU association not found\n");
of_node_put(dn);
return -ENODEV;
}
if (of_address_to_resource(dn, 0, &r0) ||
of_address_to_resource(dn, 1, &r1)) {
printk(KERN_WARNING "IIC: Can't resolve addresses\n");
of_node_put(dn);
return -ENODEV;
}
host = NULL;
if (found < IIC_NODE_COUNT) {
host = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
IIC_SOURCE_COUNT,
&iic_host_ops,
IIC_IRQ_INVALID);
iic_hosts[found] = host;
BUG_ON(iic_hosts[found] == NULL);
iic_hosts[found]->host_data = of_node_get(dn);
found++;
}
init_one_iic(np[0], r0.start, host);
init_one_iic(np[1], r1.start, host);
}
if (found)
return 0;
else
return -ENODEV;
}
void __init iic_init_IRQ(void)
{
/* Discover and initialize iics */
if (setup_iic() < 0)
panic("IIC: Failed to initialize !\n");
/* Set master interrupt handling function */
ppc_md.get_irq = iic_get_irq;
/* Enable on current CPU */
iic_setup_cpu();
}