kernel-ark/arch/i386/kernel/head.S
Sam Ravnborg 86feeaa812 kbuild: full dependency check on asm-offsets.h
Building asm-offsets.h has been moved to a seperate Kbuild file
located in the top-level directory. This allow us to share the
functionality across the architectures.

The old rules in architecture specific Makefiles will die
in subsequent patches.

Furhtermore the usual kbuild dependency tracking is now used
when deciding to rebuild asm-offsets.s. So we no longer risk
to fail a rebuild caused by asm-offsets.c dependencies being touched.

With this common rule-set we now force the same name across
all architectures. Following patches will fix the rest.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 19:28:28 +02:00

528 lines
13 KiB
ArmAsm

/*
* linux/arch/i386/kernel/head.S -- the 32-bit startup code.
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Enhanced CPU detection and feature setting code by Mike Jagdis
* and Martin Mares, November 1997.
*/
.text
#include <linux/config.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/desc.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/setup.h>
/*
* References to members of the new_cpu_data structure.
*/
#define X86 new_cpu_data+CPUINFO_x86
#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor
#define X86_MODEL new_cpu_data+CPUINFO_x86_model
#define X86_MASK new_cpu_data+CPUINFO_x86_mask
#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math
#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level
#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability
#define X86_VENDOR_ID new_cpu_data+CPUINFO_x86_vendor_id
/*
* This is how much memory *in addition to the memory covered up to
* and including _end* we need mapped initially. We need one bit for
* each possible page, but only in low memory, which means
* 2^32/4096/8 = 128K worst case (4G/4G split.)
*
* Modulo rounding, each megabyte assigned here requires a kilobyte of
* memory, which is currently unreclaimed.
*
* This should be a multiple of a page.
*/
#define INIT_MAP_BEYOND_END (128*1024)
/*
* 32-bit kernel entrypoint; only used by the boot CPU. On entry,
* %esi points to the real-mode code as a 32-bit pointer.
* CS and DS must be 4 GB flat segments, but we don't depend on
* any particular GDT layout, because we load our own as soon as we
* can.
*/
ENTRY(startup_32)
/*
* Set segments to known values.
*/
cld
lgdt boot_gdt_descr - __PAGE_OFFSET
movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
/*
* Clear BSS first so that there are no surprises...
* No need to cld as DF is already clear from cld above...
*/
xorl %eax,%eax
movl $__bss_start - __PAGE_OFFSET,%edi
movl $__bss_stop - __PAGE_OFFSET,%ecx
subl %edi,%ecx
shrl $2,%ecx
rep ; stosl
/*
* Copy bootup parameters out of the way.
* Note: %esi still has the pointer to the real-mode data.
* With the kexec as boot loader, parameter segment might be loaded beyond
* kernel image and might not even be addressable by early boot page tables.
* (kexec on panic case). Hence copy out the parameters before initializing
* page tables.
*/
movl $(boot_params - __PAGE_OFFSET),%edi
movl $(PARAM_SIZE/4),%ecx
cld
rep
movsl
movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi
andl %esi,%esi
jnz 2f # New command line protocol
cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
jne 1f
movzwl OLD_CL_OFFSET,%esi
addl $(OLD_CL_BASE_ADDR),%esi
2:
movl $(saved_command_line - __PAGE_OFFSET),%edi
movl $(COMMAND_LINE_SIZE/4),%ecx
rep
movsl
1:
/*
* Initialize page tables. This creates a PDE and a set of page
* tables, which are located immediately beyond _end. The variable
* init_pg_tables_end is set up to point to the first "safe" location.
* Mappings are created both at virtual address 0 (identity mapping)
* and PAGE_OFFSET for up to _end+sizeof(page tables)+INIT_MAP_BEYOND_END.
*
* Warning: don't use %esi or the stack in this code. However, %esp
* can be used as a GPR if you really need it...
*/
page_pde_offset = (__PAGE_OFFSET >> 20);
movl $(pg0 - __PAGE_OFFSET), %edi
movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
movl $0x007, %eax /* 0x007 = PRESENT+RW+USER */
10:
leal 0x007(%edi),%ecx /* Create PDE entry */
movl %ecx,(%edx) /* Store identity PDE entry */
movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */
addl $4,%edx
movl $1024, %ecx
11:
stosl
addl $0x1000,%eax
loop 11b
/* End condition: we must map up to and including INIT_MAP_BEYOND_END */
/* bytes beyond the end of our own page tables; the +0x007 is the attribute bits */
leal (INIT_MAP_BEYOND_END+0x007)(%edi),%ebp
cmpl %ebp,%eax
jb 10b
movl %edi,(init_pg_tables_end - __PAGE_OFFSET)
#ifdef CONFIG_SMP
xorl %ebx,%ebx /* This is the boot CPU (BSP) */
jmp 3f
/*
* Non-boot CPU entry point; entered from trampoline.S
* We can't lgdt here, because lgdt itself uses a data segment, but
* we know the trampoline has already loaded the boot_gdt_table GDT
* for us.
*/
ENTRY(startup_32_smp)
cld
movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
/*
* New page tables may be in 4Mbyte page mode and may
* be using the global pages.
*
* NOTE! If we are on a 486 we may have no cr4 at all!
* So we do not try to touch it unless we really have
* some bits in it to set. This won't work if the BSP
* implements cr4 but this AP does not -- very unlikely
* but be warned! The same applies to the pse feature
* if not equally supported. --macro
*
* NOTE! We have to correct for the fact that we're
* not yet offset PAGE_OFFSET..
*/
#define cr4_bits mmu_cr4_features-__PAGE_OFFSET
movl cr4_bits,%edx
andl %edx,%edx
jz 6f
movl %cr4,%eax # Turn on paging options (PSE,PAE,..)
orl %edx,%eax
movl %eax,%cr4
btl $5, %eax # check if PAE is enabled
jnc 6f
/* Check if extended functions are implemented */
movl $0x80000000, %eax
cpuid
cmpl $0x80000000, %eax
jbe 6f
mov $0x80000001, %eax
cpuid
/* Execute Disable bit supported? */
btl $20, %edx
jnc 6f
/* Setup EFER (Extended Feature Enable Register) */
movl $0xc0000080, %ecx
rdmsr
btsl $11, %eax
/* Make changes effective */
wrmsr
6:
/* This is a secondary processor (AP) */
xorl %ebx,%ebx
incl %ebx
3:
#endif /* CONFIG_SMP */
/*
* Enable paging
*/
movl $swapper_pg_dir-__PAGE_OFFSET,%eax
movl %eax,%cr3 /* set the page table pointer.. */
movl %cr0,%eax
orl $0x80000000,%eax
movl %eax,%cr0 /* ..and set paging (PG) bit */
ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */
1:
/* Set up the stack pointer */
lss stack_start,%esp
/*
* Initialize eflags. Some BIOS's leave bits like NT set. This would
* confuse the debugger if this code is traced.
* XXX - best to initialize before switching to protected mode.
*/
pushl $0
popfl
#ifdef CONFIG_SMP
andl %ebx,%ebx
jz 1f /* Initial CPU cleans BSS */
jmp checkCPUtype
1:
#endif /* CONFIG_SMP */
/*
* start system 32-bit setup. We need to re-do some of the things done
* in 16-bit mode for the "real" operations.
*/
call setup_idt
checkCPUtype:
movl $-1,X86_CPUID # -1 for no CPUID initially
/* check if it is 486 or 386. */
/*
* XXX - this does a lot of unnecessary setup. Alignment checks don't
* apply at our cpl of 0 and the stack ought to be aligned already, and
* we don't need to preserve eflags.
*/
movb $3,X86 # at least 386
pushfl # push EFLAGS
popl %eax # get EFLAGS
movl %eax,%ecx # save original EFLAGS
xorl $0x240000,%eax # flip AC and ID bits in EFLAGS
pushl %eax # copy to EFLAGS
popfl # set EFLAGS
pushfl # get new EFLAGS
popl %eax # put it in eax
xorl %ecx,%eax # change in flags
pushl %ecx # restore original EFLAGS
popfl
testl $0x40000,%eax # check if AC bit changed
je is386
movb $4,X86 # at least 486
testl $0x200000,%eax # check if ID bit changed
je is486
/* get vendor info */
xorl %eax,%eax # call CPUID with 0 -> return vendor ID
cpuid
movl %eax,X86_CPUID # save CPUID level
movl %ebx,X86_VENDOR_ID # lo 4 chars
movl %edx,X86_VENDOR_ID+4 # next 4 chars
movl %ecx,X86_VENDOR_ID+8 # last 4 chars
orl %eax,%eax # do we have processor info as well?
je is486
movl $1,%eax # Use the CPUID instruction to get CPU type
cpuid
movb %al,%cl # save reg for future use
andb $0x0f,%ah # mask processor family
movb %ah,X86
andb $0xf0,%al # mask model
shrb $4,%al
movb %al,X86_MODEL
andb $0x0f,%cl # mask mask revision
movb %cl,X86_MASK
movl %edx,X86_CAPABILITY
is486: movl $0x50022,%ecx # set AM, WP, NE and MP
jmp 2f
is386: movl $2,%ecx # set MP
2: movl %cr0,%eax
andl $0x80000011,%eax # Save PG,PE,ET
orl %ecx,%eax
movl %eax,%cr0
call check_x87
lgdt cpu_gdt_descr
lidt idt_descr
ljmp $(__KERNEL_CS),$1f
1: movl $(__KERNEL_DS),%eax # reload all the segment registers
movl %eax,%ss # after changing gdt.
movl $(__USER_DS),%eax # DS/ES contains default USER segment
movl %eax,%ds
movl %eax,%es
xorl %eax,%eax # Clear FS/GS and LDT
movl %eax,%fs
movl %eax,%gs
lldt %ax
cld # gcc2 wants the direction flag cleared at all times
#ifdef CONFIG_SMP
movb ready, %cl
movb $1, ready
cmpb $0,%cl
je 1f # the first CPU calls start_kernel
# all other CPUs call initialize_secondary
call initialize_secondary
jmp L6
1:
#endif /* CONFIG_SMP */
call start_kernel
L6:
jmp L6 # main should never return here, but
# just in case, we know what happens.
/*
* We depend on ET to be correct. This checks for 287/387.
*/
check_x87:
movb $0,X86_HARD_MATH
clts
fninit
fstsw %ax
cmpb $0,%al
je 1f
movl %cr0,%eax /* no coprocessor: have to set bits */
xorl $4,%eax /* set EM */
movl %eax,%cr0
ret
ALIGN
1: movb $1,X86_HARD_MATH
.byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */
ret
/*
* setup_idt
*
* sets up a idt with 256 entries pointing to
* ignore_int, interrupt gates. It doesn't actually load
* idt - that can be done only after paging has been enabled
* and the kernel moved to PAGE_OFFSET. Interrupts
* are enabled elsewhere, when we can be relatively
* sure everything is ok.
*
* Warning: %esi is live across this function.
*/
setup_idt:
lea ignore_int,%edx
movl $(__KERNEL_CS << 16),%eax
movw %dx,%ax /* selector = 0x0010 = cs */
movw $0x8E00,%dx /* interrupt gate - dpl=0, present */
lea idt_table,%edi
mov $256,%ecx
rp_sidt:
movl %eax,(%edi)
movl %edx,4(%edi)
addl $8,%edi
dec %ecx
jne rp_sidt
ret
/* This is the default interrupt "handler" :-) */
ALIGN
ignore_int:
cld
#ifdef CONFIG_PRINTK
pushl %eax
pushl %ecx
pushl %edx
pushl %es
pushl %ds
movl $(__KERNEL_DS),%eax
movl %eax,%ds
movl %eax,%es
pushl 16(%esp)
pushl 24(%esp)
pushl 32(%esp)
pushl 40(%esp)
pushl $int_msg
call printk
addl $(5*4),%esp
popl %ds
popl %es
popl %edx
popl %ecx
popl %eax
#endif
iret
/*
* Real beginning of normal "text" segment
*/
ENTRY(stext)
ENTRY(_stext)
/*
* BSS section
*/
.section ".bss.page_aligned","w"
ENTRY(swapper_pg_dir)
.fill 1024,4,0
ENTRY(empty_zero_page)
.fill 4096,1,0
/*
* This starts the data section.
*/
.data
ENTRY(stack_start)
.long init_thread_union+THREAD_SIZE
.long __BOOT_DS
ready: .byte 0
int_msg:
.asciz "Unknown interrupt or fault at EIP %p %p %p\n"
/*
* The IDT and GDT 'descriptors' are a strange 48-bit object
* only used by the lidt and lgdt instructions. They are not
* like usual segment descriptors - they consist of a 16-bit
* segment size, and 32-bit linear address value:
*/
.globl boot_gdt_descr
.globl idt_descr
.globl cpu_gdt_descr
ALIGN
# early boot GDT descriptor (must use 1:1 address mapping)
.word 0 # 32 bit align gdt_desc.address
boot_gdt_descr:
.word __BOOT_DS+7
.long boot_gdt_table - __PAGE_OFFSET
.word 0 # 32-bit align idt_desc.address
idt_descr:
.word IDT_ENTRIES*8-1 # idt contains 256 entries
.long idt_table
# boot GDT descriptor (later on used by CPU#0):
.word 0 # 32 bit align gdt_desc.address
cpu_gdt_descr:
.word GDT_ENTRIES*8-1
.long cpu_gdt_table
.fill NR_CPUS-1,8,0 # space for the other GDT descriptors
/*
* The boot_gdt_table must mirror the equivalent in setup.S and is
* used only for booting.
*/
.align L1_CACHE_BYTES
ENTRY(boot_gdt_table)
.fill GDT_ENTRY_BOOT_CS,8,0
.quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */
.quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */
/*
* The Global Descriptor Table contains 28 quadwords, per-CPU.
*/
.align PAGE_SIZE_asm
ENTRY(cpu_gdt_table)
.quad 0x0000000000000000 /* NULL descriptor */
.quad 0x0000000000000000 /* 0x0b reserved */
.quad 0x0000000000000000 /* 0x13 reserved */
.quad 0x0000000000000000 /* 0x1b reserved */
.quad 0x0000000000000000 /* 0x20 unused */
.quad 0x0000000000000000 /* 0x28 unused */
.quad 0x0000000000000000 /* 0x33 TLS entry 1 */
.quad 0x0000000000000000 /* 0x3b TLS entry 2 */
.quad 0x0000000000000000 /* 0x43 TLS entry 3 */
.quad 0x0000000000000000 /* 0x4b reserved */
.quad 0x0000000000000000 /* 0x53 reserved */
.quad 0x0000000000000000 /* 0x5b reserved */
.quad 0x00cf9a000000ffff /* 0x60 kernel 4GB code at 0x00000000 */
.quad 0x00cf92000000ffff /* 0x68 kernel 4GB data at 0x00000000 */
.quad 0x00cffa000000ffff /* 0x73 user 4GB code at 0x00000000 */
.quad 0x00cff2000000ffff /* 0x7b user 4GB data at 0x00000000 */
.quad 0x0000000000000000 /* 0x80 TSS descriptor */
.quad 0x0000000000000000 /* 0x88 LDT descriptor */
/* Segments used for calling PnP BIOS */
.quad 0x00c09a0000000000 /* 0x90 32-bit code */
.quad 0x00809a0000000000 /* 0x98 16-bit code */
.quad 0x0080920000000000 /* 0xa0 16-bit data */
.quad 0x0080920000000000 /* 0xa8 16-bit data */
.quad 0x0080920000000000 /* 0xb0 16-bit data */
/*
* The APM segments have byte granularity and their bases
* and limits are set at run time.
*/
.quad 0x00409a0000000000 /* 0xb8 APM CS code */
.quad 0x00009a0000000000 /* 0xc0 APM CS 16 code (16 bit) */
.quad 0x0040920000000000 /* 0xc8 APM DS data */
.quad 0x0000920000000000 /* 0xd0 - ESPFIX 16-bit SS */
.quad 0x0000000000000000 /* 0xd8 - unused */
.quad 0x0000000000000000 /* 0xe0 - unused */
.quad 0x0000000000000000 /* 0xe8 - unused */
.quad 0x0000000000000000 /* 0xf0 - unused */
.quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */