davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
os-build
kernel-ark/Documentation/s390/driver-model.rst
Mauro Carvalho Chehab 8b4a503d65 docs: s390: convert docs to ReST and rename to *.rst 
Convert all text files with s390 documentation to ReST format.

Tried to preserve as much as possible the original document
format. Still, some of the files required some work in order
for it to be visible on both plain text and after converted
to html.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-11 09:48:14 +02:00

329 lines
9.8 KiB
ReStructuredText
Raw Permalink Blame History

=============================
S/390 driver model interfaces
=============================
1. CCW devices
--------------
All devices which can be addressed by means of ccws are called 'CCW devices' -
even if they aren't actually driven by ccws.
All ccw devices are accessed via a subchannel, this is reflected in the
structures under devices/::
devices/
- system/
- css0/
- 0.0.0000/0.0.0815/
- 0.0.0001/0.0.4711/
- 0.0.0002/
- 0.1.0000/0.1.1234/
...
- defunct/
In this example, device 0815 is accessed via subchannel 0 in subchannel set 0,
device 4711 via subchannel 1 in subchannel set 0, and subchannel 2 is a non-I/O
subchannel. Device 1234 is accessed via subchannel 0 in subchannel set 1.
The subchannel named 'defunct' does not represent any real subchannel on the
system; it is a pseudo subchannel where disconnected ccw devices are moved to
if they are displaced by another ccw device becoming operational on their
former subchannel. The ccw devices will be moved again to a proper subchannel
if they become operational again on that subchannel.
You should address a ccw device via its bus id (e.g. 0.0.4711); the device can
be found under bus/ccw/devices/.
All ccw devices export some data via sysfs.
cutype:
The control unit type / model.
devtype:
The device type / model, if applicable.
availability:
Can be 'good' or 'boxed'; 'no path' or 'no device' for
disconnected devices.
online:
An interface to set the device online and offline.
In the special case of the device being disconnected (see the
notify function under 1.2), piping 0 to online will forcibly delete
the device.
The device drivers can add entries to export per-device data and interfaces.
There is also some data exported on a per-subchannel basis (see under
bus/css/devices/):
chpids:
Via which chpids the device is connected.
pimpampom:
The path installed, path available and path operational masks.
There also might be additional data, for example for block devices.
1.1 Bringing up a ccw device
----------------------------
This is done in several steps.
a. Each driver can provide one or more parameter interfaces where parameters can
be specified. These interfaces are also in the driver's responsibility.
b. After a. has been performed, if necessary, the device is finally brought up
via the 'online' interface.
1.2 Writing a driver for ccw devices
------------------------------------
The basic struct ccw_device and struct ccw_driver data structures can be found
under include/asm/ccwdev.h::
struct ccw_device {
spinlock_t *ccwlock;
struct ccw_device_private *private;
struct ccw_device_id id;
struct ccw_driver *drv;
struct device dev;
int online;
void (*handler) (struct ccw_device *dev, unsigned long intparm,
struct irb *irb);
};
struct ccw_driver {
struct module *owner;
struct ccw_device_id *ids;
int (*probe) (struct ccw_device *);
int (*remove) (struct ccw_device *);
int (*set_online) (struct ccw_device *);
int (*set_offline) (struct ccw_device *);
int (*notify) (struct ccw_device *, int);
struct device_driver driver;
char *name;
};
The 'private' field contains data needed for internal i/o operation only, and
is not available to the device driver.
Each driver should declare in a MODULE_DEVICE_TABLE into which CU types/models
and/or device types/models it is interested. This information can later be found
in the struct ccw_device_id fields::
struct ccw_device_id {
__u16 match_flags;
__u16 cu_type;
__u16 dev_type;
__u8 cu_model;
__u8 dev_model;
unsigned long driver_info;
};
The functions in ccw_driver should be used in the following way:
probe:
This function is called by the device layer for each device the driver
is interested in. The driver should only allocate private structures
to put in dev->driver_data and create attributes (if needed). Also,
the interrupt handler (see below) should be set here.
::
int (*probe) (struct ccw_device *cdev);
Parameters:
cdev
- the device to be probed.
remove:
This function is called by the device layer upon removal of the driver,
the device or the module. The driver should perform cleanups here.
::
int (*remove) (struct ccw_device *cdev);
Parameters:
cdev
- the device to be removed.
set_online:
This function is called by the common I/O layer when the device is
activated via the 'online' attribute. The driver should finally
setup and activate the device here.
::
int (*set_online) (struct ccw_device *);
Parameters:
cdev
- the device to be activated. The common layer has
verified that the device is not already online.
set_offline: This function is called by the common I/O layer when the device is
de-activated via the 'online' attribute. The driver should shut
down the device, but not de-allocate its private data.
::
int (*set_offline) (struct ccw_device *);
Parameters:
cdev
- the device to be deactivated. The common layer has
verified that the device is online.
notify:
This function is called by the common I/O layer for some state changes
of the device.
Signalled to the driver are:
* In online state, device detached (CIO_GONE) or last path gone
(CIO_NO_PATH). The driver must return !0 to keep the device; for
return code 0, the device will be deleted as usual (also when no
notify function is registered). If the driver wants to keep the
device, it is moved into disconnected state.
* In disconnected state, device operational again (CIO_OPER). The
common I/O layer performs some sanity checks on device number and
Device / CU to be reasonably sure if it is still the same device.
If not, the old device is removed and a new one registered. By the
return code of the notify function the device driver signals if it
wants the device back: !0 for keeping, 0 to make the device being
removed and re-registered.
::
int (*notify) (struct ccw_device *, int);
Parameters:
cdev
- the device whose state changed.
event
- the event that happened. This can be one of CIO_GONE,
CIO_NO_PATH or CIO_OPER.
The handler field of the struct ccw_device is meant to be set to the interrupt
handler for the device. In order to accommodate drivers which use several
distinct handlers (e.g. multi subchannel devices), this is a member of ccw_device
instead of ccw_driver.
The handler is registered with the common layer during set_online() processing
before the driver is called, and is deregistered during set_offline() after the
driver has been called. Also, after registering / before deregistering, path
grouping resp. disbanding of the path group (if applicable) are performed.
::
void (*handler) (struct ccw_device *dev, unsigned long intparm, struct irb *irb);
Parameters: dev - the device the handler is called for
intparm - the intparm which allows the device driver to identify
the i/o the interrupt is associated with, or to recognize
the interrupt as unsolicited.
irb - interruption response block which contains the accumulated
status.
The device driver is called from the common ccw_device layer and can retrieve
information about the interrupt from the irb parameter.
1.3 ccwgroup devices
--------------------
The ccwgroup mechanism is designed to handle devices consisting of multiple ccw
devices, like lcs or ctc.
The ccw driver provides a 'group' attribute. Piping bus ids of ccw devices to
this attributes creates a ccwgroup device consisting of these ccw devices (if
possible). This ccwgroup device can be set online or offline just like a normal
ccw device.
Each ccwgroup device also provides an 'ungroup' attribute to destroy the device
again (only when offline). This is a generic ccwgroup mechanism (the driver does
not need to implement anything beyond normal removal routines).
A ccw device which is a member of a ccwgroup device carries a pointer to the
ccwgroup device in the driver_data of its device struct. This field must not be
touched by the driver - it should use the ccwgroup device's driver_data for its
private data.
To implement a ccwgroup driver, please refer to include/asm/ccwgroup.h. Keep in
mind that most drivers will need to implement both a ccwgroup and a ccw
driver.
2. Channel paths
-----------------
Channel paths show up, like subchannels, under the channel subsystem root (css0)
and are called 'chp0.<chpid>'. They have no driver and do not belong to any bus.
Please note, that unlike /proc/chpids in 2.4, the channel path objects reflect
only the logical state and not the physical state, since we cannot track the
latter consistently due to lacking machine support (we don't need to be aware
of it anyway).
status
- Can be 'online' or 'offline'.
Piping 'on' or 'off' sets the chpid logically online/offline.
Piping 'on' to an online chpid triggers path reprobing for all devices
the chpid connects to. This can be used to force the kernel to re-use
a channel path the user knows to be online, but the machine hasn't
created a machine check for.
type
- The physical type of the channel path.
shared
- Whether the channel path is shared.
cmg
- The channel measurement group.
3. System devices
-----------------
3.1 xpram
---------
xpram shows up under devices/system/ as 'xpram'.
3.2 cpus
--------
For each cpu, a directory is created under devices/system/cpu/. Each cpu has an
attribute 'online' which can be 0 or 1.
4. Other devices
----------------
4.1 Netiucv
-----------
The netiucv driver creates an attribute 'connection' under
bus/iucv/drivers/netiucv. Piping to this attribute creates a new netiucv
connection to the specified host.
Netiucv connections show up under devices/iucv/ as "netiucv<ifnum>". The interface
number is assigned sequentially to the connections defined via the 'connection'
attribute.
user
- shows the connection partner.
buffer
- maximum buffer size. Pipe to it to change buffer size.
Reference in New Issue View Git Blame Copy Permalink