kernel-ark/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml
Charles Keepax 5ebba5e7d7
ASoC: cs4234: Add dtschema binding document
Document the bindings for the CS4234 ASoC codec driver.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200928111821.26967-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-28 17:59:05 +01:00

75 lines
1.9 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/cirrus,cs4234.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cirrus Logic cs4234 audio CODEC
maintainers:
- patches@opensource.cirrus.com
description:
The CS4234 is a highly versatile CODEC that combines 4 channels of
high performance analog to digital conversion, 4 channels of high
performance digital to analog conversion for audio, and 1 channel of
digital to analog conversion to provide a nondelayed audio reference
signal to an external Class H tracking power supply. If not used to
drive a tracking power supply, the 5th DAC can instead be used as a
standard audio grade DAC, with performance specifications identical
to that of the 4 DACs in the audio path. Additionally, the CS4234
includes tunable group delay for each of the 4 audio DAC paths to
provide lead time for the external switch-mode power supply, and a
nondelayed path into the DAC outputs for input signals requiring a
low-latency path to the outputs.
properties:
compatible:
enum:
- cirrus,cs4234
reg:
description:
The 7-bit I2C address depends on the state of the ADx pins, in
binary given by [0 0 1 0 AD2 AD1 AD0 0].
items:
minimum: 0x10
maximum: 0x17
VA-supply:
description:
Analogue power supply.
VL-supply:
description:
Interface power supply.
reset-gpios:
maxItems: 1
required:
- compatible
- reg
- VA-supply
- VL-supply
additionalProperties: false
examples:
- |
i2c@e0004000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xe0004000 0x1000>;
cs4234: codec@11 {
compatible = "cirrus,cs4234";
reg = <0x11>;
VA-supply = <&vdd3v3>;
VL-supply = <&vdd3v3>;
reset-gpios = <&gpio 0>;
};
};