db097f95b4
Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to switch to the gpiod consume API to handle this correctly. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
26 lines
528 B
Plaintext
26 lines
528 B
Plaintext
AK4104 S/PDIF transmitter
|
|
|
|
This device supports SPI mode only.
|
|
|
|
Required properties:
|
|
|
|
- compatible : "asahi-kasei,ak4104"
|
|
|
|
- reg : The chip select number on the SPI bus
|
|
|
|
- vdd-supply : A regulator node, providing 2.7V - 3.6V
|
|
|
|
Optional properties:
|
|
|
|
- reset-gpios : a GPIO spec for the reset pin. If specified, it will be
|
|
deasserted before communication to the device starts.
|
|
|
|
Example:
|
|
|
|
spdif: ak4104@0 {
|
|
compatible = "asahi-kasei,ak4104";
|
|
reg = <0>;
|
|
spi-max-frequency = <5000000>;
|
|
vdd-supply = <&vdd_3v3_reg>;
|
|
};
|