661db794eb
Add a interrupts-names property to allow the possibility to provide a name to any interrupts entries. If the name is available, use it to name the resource, otherwise keep the device full name. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> [grant.likely: use "interrupt-names" and tidy documentation] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
55 lines
1.4 KiB
Plaintext
55 lines
1.4 KiB
Plaintext
Some properties contain an ordered list of 1 or more datum which are
|
|
normally accessed by index. However, some devices will have multiple
|
|
values which are more naturally accessed by name. Device nodes can
|
|
include a supplemental property for assigning names to each of the list
|
|
items. The names property consists of a list of strings in the same
|
|
order as the data in the resource property.
|
|
|
|
The following supplemental names properties are defined.
|
|
|
|
Resource Property Supplemental Names Property
|
|
----------------- ---------------------------
|
|
reg reg-names
|
|
clocks clock-names
|
|
interrupts interrupt-names
|
|
|
|
Usage:
|
|
|
|
The -names property must be used in conjunction with the normal resource
|
|
property. If not it will be ignored.
|
|
|
|
Examples:
|
|
|
|
l4-abe {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x48000000 0x00001000>, /* MPU path */
|
|
<1 0 0x49000000 0x00001000>; /* L3 path */
|
|
mcasp {
|
|
compatible = "ti,mcasp";
|
|
reg = <0 0x10 0x10>, <0 0x20 0x10>,
|
|
<1 0x10 0x10>, <1 0x20 0x10>;
|
|
reg-names = "mpu", "dat",
|
|
"dma", "dma_dat";
|
|
interrupts = <11>, <12>;
|
|
interrupt-names = "rx", "tx";
|
|
};
|
|
|
|
timer {
|
|
compatible = "ti,timer";
|
|
reg = <0 0x40 0x10>, <1 0x40 0x10>;
|
|
reg-names = "mpu", "dma";
|
|
};
|
|
};
|
|
|
|
|
|
usb {
|
|
compatible = "ti,usb-host";
|
|
reg = <0x4a064000 0x800>, <0x4a064800 0x200>,
|
|
<0x4a064c00 0x200>;
|
|
reg-names = "config", "ohci", "ehci";
|
|
interrupts = <14>, <15>;
|
|
interrupt-names = "ohci", "ehci";
|
|
};
|