d2083893e4
Add Device Tree bindings documentation for Intel Keem Bay SoC's pin controller. Add entry for INTEL Keem Bay pinctrl driver in MAINTAINERS file Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Acked-by: Mark Gross <mgross@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210806142527.29113-2-lakshmi.sowjanya.d@intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
136 lines
3.5 KiB
YAML
136 lines
3.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Intel Keem Bay pin controller Device Tree Bindings
|
|
|
|
maintainers:
|
|
- Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
|
|
|
|
description: |
|
|
Intel Keem Bay SoC integrates a pin controller which enables control
|
|
of pin directions, input/output values and configuration
|
|
for a total of 80 pins.
|
|
|
|
properties:
|
|
compatible:
|
|
const: intel,keembay-pinctrl
|
|
|
|
reg:
|
|
maxItems: 2
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
const: 2
|
|
|
|
ngpios:
|
|
description: The number of GPIOs exposed.
|
|
const: 80
|
|
|
|
interrupts:
|
|
description:
|
|
Specifies the interrupt lines to be used by the controller.
|
|
Each interrupt line is shared by upto 4 GPIO lines.
|
|
maxItems: 8
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
const: 2
|
|
|
|
patternProperties:
|
|
'^gpio@[0-9a-f]*$':
|
|
type: object
|
|
|
|
description:
|
|
Child nodes can be specified to contain pin configuration information,
|
|
which can then be utilized by pinctrl client devices.
|
|
The following properties are supported.
|
|
|
|
properties:
|
|
pins:
|
|
description: |
|
|
The name(s) of the pins to be configured in the child node.
|
|
Supported pin names are "GPIO0" up to "GPIO79".
|
|
|
|
bias-disable: true
|
|
|
|
bias-pull-down: true
|
|
|
|
bias-pull-up: true
|
|
|
|
drive-strength:
|
|
description: IO pads drive strength in milli Ampere.
|
|
enum: [2, 4, 8, 12]
|
|
|
|
bias-bus-hold:
|
|
type: boolean
|
|
|
|
input-schmitt-enable:
|
|
type: boolean
|
|
|
|
slew-rate:
|
|
description: GPIO slew rate control.
|
|
0 - Fast(~100MHz)
|
|
1 - Slow(~50MHz)
|
|
enum: [0, 1]
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- gpio-controller
|
|
- ngpios
|
|
- '#gpio-cells'
|
|
- interrupts
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
// Example 1
|
|
gpio@0 {
|
|
compatible = "intel,keembay-pinctrl";
|
|
reg = <0x600b0000 0x88>,
|
|
<0x600b0190 0x1ac>;
|
|
gpio-controller;
|
|
ngpios = <0x50>;
|
|
#gpio-cells = <0x2>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
// Example 2
|
|
gpio@1 {
|
|
compatible = "intel,keembay-pinctrl";
|
|
reg = <0x600c0000 0x88>,
|
|
<0x600c0190 0x1ac>;
|
|
gpio-controller;
|
|
ngpios = <0x50>;
|
|
#gpio-cells = <0x2>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|