a2127e400e
The OCTEON SATA controller is currently found on cn71XX devices. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Vinita Gupta <vgupta@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Tejun Heo <tj@kernel.org>
43 lines
1.3 KiB
Plaintext
43 lines
1.3 KiB
Plaintext
* UCTL SATA controller glue
|
|
|
|
UCTL is the bridge unit between the I/O interconnect (an internal bus)
|
|
and the SATA AHCI host controller (UAHC). It performs the following functions:
|
|
- provides interfaces for the applications to access the UAHC AHCI
|
|
registers on the CN71XX I/O space.
|
|
- provides a bridge for UAHC to fetch AHCI command table entries and data
|
|
buffers from Level 2 Cache.
|
|
- posts interrupts to the CIU.
|
|
- contains registers that:
|
|
- control the behavior of the UAHC
|
|
- control the clock/reset generation to UAHC
|
|
- control endian swapping for all UAHC registers and DMA accesses
|
|
|
|
Properties:
|
|
|
|
- compatible: "cavium,octeon-7130-sata-uctl"
|
|
|
|
Compatibility with the cn7130 SOC.
|
|
|
|
- reg: The base address of the UCTL register bank.
|
|
|
|
- #address-cells, #size-cells, ranges and dma-ranges must be present and hold
|
|
suitable values to map all child nodes.
|
|
|
|
Example:
|
|
|
|
uctl@118006c000000 {
|
|
compatible = "cavium,octeon-7130-sata-uctl";
|
|
reg = <0x11800 0x6c000000 0x0 0x100>;
|
|
ranges; /* Direct mapping */
|
|
dma-ranges;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
sata: sata@16c0000000000 {
|
|
compatible = "cavium,octeon-7130-ahci";
|
|
reg = <0x16c00 0x00000000 0x0 0x200>;
|
|
interrupt-parent = <&cibsata>;
|
|
interrupts = <2 4>; /* Bit: 2, level */
|
|
};
|
|
};
|