736b1c9c95
The two device tree files octeon_3xxx.dts and octeon_68xx.dts are trimmed by code in a subsequent patch to reflect the hardware actually present on the board. To this end several properties that are not part of the declared bindings are added to aid in trimming off unwanted nodes. Since the device tree and the code that trims it are bound into the kernel binary, these 'marker' properties never escape into the wild, and are purely an implementation detail of the kernel early boot process. This is done for backwards compatibility with existing boards (identified by a board type enumeration value by their bootloaders). New boards will always pass a device tree from the bootloader, the built-in trees are ignored in this case. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3937/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
127 lines
3.5 KiB
Plaintext
127 lines
3.5 KiB
Plaintext
* Boot Bus
|
|
|
|
The Octeon Boot Bus is a configurable parallel bus with 8 chip
|
|
selects. Each chip select is independently configurable.
|
|
|
|
Properties:
|
|
- compatible: "cavium,octeon-3860-bootbus"
|
|
|
|
Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
|
|
|
|
- reg: The base address of the Boot Bus' register bank.
|
|
|
|
- #address-cells: Must be <2>. The first cell is the chip select
|
|
within the bootbus. The second cell is the offset from the chip select.
|
|
|
|
- #size-cells: Must be <1>.
|
|
|
|
- ranges: There must be one one triplet of (child-bus-address,
|
|
parent-bus-address, length) for each active chip select. If the
|
|
length element for any triplet is zero, the chip select is disabled,
|
|
making it inactive.
|
|
|
|
The configuration parameters for each chip select are stored in child
|
|
nodes.
|
|
|
|
Configuration Properties:
|
|
- compatible: "cavium,octeon-3860-bootbus-config"
|
|
|
|
- cavium,cs-index: A single cell indicating the chip select that
|
|
corresponds to this configuration.
|
|
|
|
- cavium,t-adr: A cell specifying the ADR timing (in nS).
|
|
|
|
- cavium,t-ce: A cell specifying the CE timing (in nS).
|
|
|
|
- cavium,t-oe: A cell specifying the OE timing (in nS).
|
|
|
|
- cavium,t-we: A cell specifying the WE timing (in nS).
|
|
|
|
- cavium,t-rd-hld: A cell specifying the RD_HLD timing (in nS).
|
|
|
|
- cavium,t-wr-hld: A cell specifying the WR_HLD timing (in nS).
|
|
|
|
- cavium,t-pause: A cell specifying the PAUSE timing (in nS).
|
|
|
|
- cavium,t-wait: A cell specifying the WAIT timing (in nS).
|
|
|
|
- cavium,t-page: A cell specifying the PAGE timing (in nS).
|
|
|
|
- cavium,t-rd-dly: A cell specifying the RD_DLY timing (in nS).
|
|
|
|
- cavium,pages: A cell specifying the PAGES parameter (0 = 8 bytes, 1
|
|
= 2 bytes, 2 = 4 bytes, 3 = 8 bytes).
|
|
|
|
- cavium,wait-mode: Optional. If present, wait mode (WAITM) is selected.
|
|
|
|
- cavium,page-mode: Optional. If present, page mode (PAGEM) is selected.
|
|
|
|
- cavium,bus-width: A cell specifying the WIDTH parameter (in bits) of
|
|
the bus for this chip select.
|
|
|
|
- cavium,ale-mode: Optional. If present, ALE mode is selected.
|
|
|
|
- cavium,sam-mode: Optional. If present, SAM mode is selected.
|
|
|
|
- cavium,or-mode: Optional. If present, OR mode is selected.
|
|
|
|
Example:
|
|
bootbus: bootbus@1180000000000 {
|
|
compatible = "cavium,octeon-3860-bootbus";
|
|
reg = <0x11800 0x00000000 0x0 0x200>;
|
|
/* The chip select number and offset */
|
|
#address-cells = <2>;
|
|
/* The size of the chip select region */
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x0 0x1f400000 0xc00000>,
|
|
<1 0 0x10000 0x30000000 0>,
|
|
<2 0 0x10000 0x40000000 0>,
|
|
<3 0 0x10000 0x50000000 0>,
|
|
<4 0 0x0 0x1d020000 0x10000>,
|
|
<5 0 0x0 0x1d040000 0x10000>,
|
|
<6 0 0x0 0x1d050000 0x10000>,
|
|
<7 0 0x10000 0x90000000 0>;
|
|
|
|
cavium,cs-config@0 {
|
|
compatible = "cavium,octeon-3860-bootbus-config";
|
|
cavium,cs-index = <0>;
|
|
cavium,t-adr = <20>;
|
|
cavium,t-ce = <60>;
|
|
cavium,t-oe = <60>;
|
|
cavium,t-we = <45>;
|
|
cavium,t-rd-hld = <35>;
|
|
cavium,t-wr-hld = <45>;
|
|
cavium,t-pause = <0>;
|
|
cavium,t-wait = <0>;
|
|
cavium,t-page = <35>;
|
|
cavium,t-rd-dly = <0>;
|
|
|
|
cavium,pages = <0>;
|
|
cavium,bus-width = <8>;
|
|
};
|
|
.
|
|
.
|
|
.
|
|
cavium,cs-config@6 {
|
|
compatible = "cavium,octeon-3860-bootbus-config";
|
|
cavium,cs-index = <6>;
|
|
cavium,t-adr = <5>;
|
|
cavium,t-ce = <300>;
|
|
cavium,t-oe = <270>;
|
|
cavium,t-we = <150>;
|
|
cavium,t-rd-hld = <100>;
|
|
cavium,t-wr-hld = <70>;
|
|
cavium,t-pause = <0>;
|
|
cavium,t-wait = <0>;
|
|
cavium,t-page = <320>;
|
|
cavium,t-rd-dly = <0>;
|
|
|
|
cavium,pages = <0>;
|
|
cavium,wait-mode;
|
|
cavium,bus-width = <16>;
|
|
};
|
|
.
|
|
.
|
|
.
|
|
};
|